Original Bowden Cable for Thorens Turntable Td 145 146 147 160 165 166The description of this item has been automatically translated. If you have any questions, please feel free to contact us.Bowden cable / cable for tonearm liftfor 145, 146, 147, 160, 165, 166 and model variantsTotal length approx. 24.7mmItem photo is an example photo and corresponds to the item offeredBowden cable / cable for tonearm lift for 145, 146, 147, 160, 165, 166 and model variants Total length approx. 24.7mm Item photo is an example photo and corresponds to the item offered Marke Thorens Markenkompatibilität Für Thorens Produktart Bowdenzug EAN Nicht zutreffend

Restaurierter Thorens TD147 Turntable With Vogelaugenfurnier IN Dark BlueThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound Germany Restored Thorens TD-147 stainless steel, dark blue birds eye veneer with high-gloss finishAlso possible with different SME tonearms.Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Item description:Limit switch:    YesInner plate:             metalSpindle: 10mm Basic dimensions:            Width: 54cm, depth: 45cm, height 15cmSpecial feature:           Chassis and sub-chassis with acoustic matHousing:The housing is made of MDF and consists of two individual parts, the housing and the housing base. They are connected to each other using screws. It was professionally finished with several coats of high gloss varnish sealed and polished with appropriate intermediate sanding. This makes the surface extremely scratch-resistant. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm brushed and demagnetized stainless steel with labeling for both switches.Ortofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Large power supply:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply.Performance bottlenecks and heating no longer occur.Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance. Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Hood to be placed on the substructure: 170Cartridge MM system including installation:Ortofon 2M Red Verso (elliptical): 110 Ortofon 2M Blue Verso (elliptical, naked): 240 Ortofon 2M Bronze Verso (Fineline): 390Ortofon 2M Black Verso (Shibata): 599Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699 Cartridge MC system including installation:Audio-technica AT-OC9XEB (elliptical): 279Audio-technica AT-OC9XEN (elliptical, naked): 369Audio-technica AT33EV(elliptical, naked): 499Audio-technica ATPTG/II (microlinear): 599Audio-technica AT33SA (Shibata): 799 The housing is made of MDF and consists of two individual parts, the housing and the housing base. They are connected to each other using screws. It was professionally finished with several coats of high gloss varnish sealed and polished with appropriate intermediate sanding. This makes the surface extremely scratch-resistant. The connection panel for all required cable connections is located on the back. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your Herstellernummer nicht zutreffend Marke Restaurierter Thorens EAN Nicht zutreffend Modell TD 147

Restaurierter Thorens TD147 Turntable With Vogelaugenfurnier BlackThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound Germany Restored Thorens TD-147 stainless steel,Black birds eye veneer with high-gloss finishAlso possible with different SME tonearms.Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Item description:Limit switch:    YesInner plate:             metalSpindle: 10mm Basic dimensions:            Width: 54cm, depth: 45cm, height 15cmSpecial feature:           Chassis and sub-chassis with acoustic matHousing:The housing is made of MDF and consists of two individual parts, the housing and the housing base. They are connected to each other using screws. It was professionally finished with several coats of high gloss varnish sealed and polished with appropriate intermediate sanding. This makes the surface extremely scratch-resistant. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm brushed and demagnetized stainless steel with labeling for both switches.Ortofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable: Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Large power supply:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply.Performance bottlenecks and heating no longer occur. Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Hood to be placed on the substructure: 170Cartridge MM system including installation:Ortofon 2M Red Verso (elliptical): 110 Ortofon 2M Blue Verso (elliptical, naked): 240 Ortofon 2M Bronze Verso (Fineline): 390Ortofon 2M Black Verso (Shibata): 599Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699 Cartridge MC system including installation:Audio-technica AT-OC9XEB (elliptical): 279Audio-technica AT-OC9XEN (elliptical, naked): 369Audio-technica AT33EV(elliptical, naked): 499Audio-technica ATPTG/II (microlinear): 599Audio-technica AT33SA (Shibata): 799 The housing is made of MDF and consists of two individual parts, the housing and the housing base. They are connected to each other using screws. It was professionally finished with several coats of high gloss varnish sealed and polished with appropriate intermediate sanding. This makes the surface extremely scratch-resistant. The connection panel for all required cable connections is located on the back. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your Herstellernummer nicht zutreffend Marke Restaurierter Thorens EAN Nicht zutreffend Modell TD 147

Restored Thorens TD 147 Turntable Frame Vogelaugenfurnier BlueThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA or Japan)Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay! RESTORED by ART-AND-SOUND Restored THORENS TD147 stainless steel editionFrame with high-gloss blue birds eye veneerOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Operating voltage can be selected for each countrySemi-automatic with belt driveLimit switch and lift functionPickup: Ortofon VinylMaster AlphaBasic dimensions: 45cm x 36cm x 18cmSubchassis with acoustic matAccessories included: power supply, plate weight, audio RCA cable Item description:Limit switch:      YesInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmHousing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It has been professionally coated with birds eye veneer and several coats of high gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Ortofon VM Alpha cartridge (included):With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot.Audio cable:Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Large power supply:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply.Performance bottlenecks and heating no longer occur.Suspension:The spring elements were replaced with new ones.Spikes:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. --------The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood big (for placing on the substructure): 170Device feet made of stainless steel 43mm x 17mm (Image 6 and 7): 90Cartridge MM system including installation: Ortofon 2M Red (elliptical): 99 Ortofon 2M Blue (elliptical, naked): 220 Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599 AUDIO-TECHNICA VM 740ML (Microlinear): 339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (special line): 699 Cartridge MC System including installation: AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799AUDIO-TECHNICA OC9XML (Microlinear): 599AUDIO TECHNICA OC9XSH (Shibata): 699AUDIO TECHNICA OC9XSL (Special Line Contact): 799With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By Herstellernummer nicht zutreffend Marke Thorens - restauriert von art-and-sound EAN Nicht zutreffend Modell TD 147

This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA or Japan)Individual production! Please note the processing time stated on eBay!Individual production! Please note the processing time specified on Ebay! RESTORED by ART-AND-SOUND Restored THORENS TD147 stainless steel editionFrame with blue birds eye veneer high glossOur record players are lovingly assembled, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality cases are restored or newly manufactured using skilled craftsmanship.Electrical components are checked, moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Operating voltage selectable for each countrySemi-automatic with belt driveLimit switch and lift functionCartridge: Ortofon VinylMaster AlphaBasic dimensions: 45cm x 36cm x 18cmSubchassis with acoustic matAccessories included: power supply, plate weight, audio cinch cable Item description:Limit switch:      YesInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx.18cmHousing:The housing consists of 25 mm MDF side panels and a 16 mm thick base made of the same material. It has been professionally coated with birds eye veneer and finished with several layers of high gloss varnish sealed and polished with appropriate intermediate sanding. On the back there is the connection panel for all required cable connections.Ortofon VM Alpha cartridge (included):With the VM series, Ortofon has long created the reference MM cartridge; the long production time and the characteristic needle body are known all over the world. The VM Alpha is the entry-level model in the series and is a great entry-level system for mid-priced turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next higher needle slot.Audio cable:Ready-made analog audio cinch cable for wiring record players! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact reliability and corrosion protection are guaranteed by the 24-carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality.Large power supply:A new power supply is included in delivery. This power supply has twice the power of the original power supply.Performance bottlenecks and heating no longer occur.The spring elements were replaced with new ones.Suspension:Spikes:To decouple the record player from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record rests smoothly on the platter and runs smoothly. This record weight is in the middle weight class. It adds just enough weight to dampen the vibrations of the plate without putting strain on the bearing bushes. The suspension of the Thorens subchassis was readjusted accordingly. By using it, you increase the sound performance of your system. --------The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood large (to be placed on the substructure): 170Stainless steel feet 43mm x 17mm (Picture 6 and 7): 90Cartridge MM system including installation: Ortofon 2M Red (elliptical): 99 Ortofon 2M Blue (elliptical, naked): 220 Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599 AUDIO-TECHNICA VM 740ML (Microlinear): 339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (special line): 699 Cartridge MC System including installation: AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799AUDIO-TECHNICA OC9XML (Microlinear): 599AUDIO TECHNICA OC9XSH (Shibata): 699AUDIO TECHNICA OC9XSL (Special Line Contact): 799With the VM series, Ortofon has long created the reference MM cartridge; the long production time and the characteristic needle body are known all over the world. The VM Alpha is the entry-level model in the series and is a great entry-level system for mid-priced turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next higher needle slot. With a weight of 310g, it ensures that the record rests smoothly on the platter and runs smoothly. This record weight is in the middle weight class. It adds just enough weight to dampen the vibrations of the plate without putting strain on the bearing bushes. The suspension of the Thorens subchassis was readjusted accordingly. By using it, you increase the sound p

Thorens Mat Edition Turntable Slipmat Td 145 146 147 160 165 166The description of this item has been automatically translated. If you have any questions, please feel free to contact us.Original ThorensTurntable support with large center holefor Thorens TD145, 146, 147, 160, 165, 166cleanedOriginal Thorens Turntable support with large center hole for Thorens TD145, 146, 147, 160, 165, 166 cleaned Marke Thorens EAN Nicht zutreffend Markenkompatibilität Thorens Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland Produktart Tellermatte

Restored Thorens TD 147 Turntable Frame With Vogelaugenfurnier BlackThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220-240V/50Hz or 100-130V/60Hz (for example UNITED STATES)!RESTORED by ART-AND-SOUND 147in black birds eye veneer and high-gloss lacquer finish WITH A FIGHTING WEIGHT OF OVER 10 KG!!!Our turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Item description:Limit switch:    YesInner plate:             metalSpindle: 10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmSpecial feature:           Chassis and sub-chassis with acoustic matNew housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It has been professionally coated with precious wood veneer and several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.New faceplate:New cover plate made of 1mm brushed stainless steel (start/stop switch and lift switch are labeled)New Ortofon VinylMaster Alpha cartridgeNew audio cable:Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Large power supply:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply.Performance bottlenecks and heating no longer occur.The turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.New spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes.Resonances and feedback are thus effectively prevented. New drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. --------The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood small (to be placed on the frame):Hood big (for placing on the substructure):The following parts are available as accessories and not included in this auction:Hood small (to put on the housing):    Hood large (to put on the base):         Cartridge MM systems including installation:Ortofon 2M Red (elliptical): 110Ortofon 2M Blue (elliptical, naked): 220Ortofon 2M Bronze (fine line): 360The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It has been professionally coated with precious wood veneer and several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs sm Herstellernummer nicht zutreffend Marke Thorens - restauriert von art-and-sound EAN Nicht zutreffend Modell TD 147

Restored Thorens TD147 Turntable Black And 100 Jähriges oak WoodThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220/230V/50Hz or 110/120V/50/60Hz (for example USA and world wide)Individual production! Please note the processing time stated on Ebay!RESTORED by ART-AND-SOUND Restored 147 in a solid oak frame(the wood grain varies)Wood is a natural product. Please note that the grain is always different. After purchasing, you will receive various housing variants from which you can choose your housing. It will always be made of hundred-year-old oak.Our record players are lovingly put together and assembled by hand. Each of them is unique. The housings are newly manufactured using qualified craftsmanship. Electronic components are checked and replaced if necessary. bAll moving parts are oiled and wearing parts are replaced. A final endurance test rounds off the complex work.frame made from 100-year-old oak wood Wood with history...The old oak wood is probably from round wood that was felled in the Waldkirch area and stored in the “Sailerlenzen” farm. This farm was probably built around 1780 - 1800. This farm burned down in 1902 and the wood was saved from the flames at that time. In their first life, the “logs” were the outside walls of old houses; they were mostly hewn by hand and are approx. 105-120 years old.Item description:Limit switch:     YesInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmSpecial feature:          Subchassis with vibration-absorbing mat Housing:The housing consists of 25mm thick side panels made of solid oak wood (oiled) and a 16mm thick base made of MDF. The connection panel for all required cable connections is located on the back.Cover plate:original cover plate, black with letteringOrtofon VinylMaster Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a very good entry-level system for turntables in this price range. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the sound quality with the next higher needle slot. Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Power adapter:The scope of delivery includes a new power supply with double power and overheating protection.Turntable: The turntable is made in five complex and time-consuming steps polished to a high shine.The high gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.Spikes made of chrome-plated stainless steel: So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood big (for placing on the substructure):    180 Cartridge MM system including installation: ORTOFON 2M Red (elliptical):      129ORTOFON 2M Blue (elliptical, naked):        249ORTOFON 2M Bronze (Fineline): 399 ORTOFON 2M Black (Shibata):     649 AUDIO-TECHNICA VM 740ML (Microlinear):           339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (special line):    699 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked):   369 AUDIO-TECHNICA AT-33EV (elliptical):                   499AUDIO-TECHNICA AT-33PTG/II (Microlinear):         599AUDIO-TECHNICA AT-33SA (Shibata):                      799SME tonearms (with different pickups to choose from):SME 3009 Improved (fixed headshell): 690SME 3009 S2 Improved (replaceable headshell): 690SME Series III (replaceable tonearm tube): 690With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a very good entry-level system for turntables in this price range. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the sound quality with the next higher needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you incr Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 147 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Original Bowden Cable for Thorens Turntable Td 145 146 147 160 165 166The description of this item has been automatically translated. If you have any questions, please feel free to contact us.Bowden cable / cable for tonearm liftfor 145, 146, 147, 160, 165, 166 and model variantsTotal length approx. 24.7mmItem photo is an example photo and corresponds to the item offeredBowden cable / cable for tonearm lift for 145, 146, 147, 160, 165, 166 and model variants Total length approx. 24.7mm Item photo is an example photo and corresponds to the item offered Marke Thorens Markenkompatibilität Für Thorens Produktart Bowdenzug EAN Nicht zutreffend

Bowden cable / cable for tonearm liftfor 145, 146, 147, 160, 165, 166 and model variantsTotal length approx. 24.7mmItem photo is an example photo and corresponds to the item offeredBowden cable / cable for tonearm lift for 145, 146, 147, 160, 165, 166 and model variants Total length approx. 24.7mm Item photo is an example photo and corresponds to the item offered

Restaurierter Thorens TD147 Turntable With Vogelaugenfurnier IN Dark BlueThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound Germany Restored Thorens TD-147 stainless steel, dark blue birds eye veneer with high-gloss finishAlso possible with different SME tonearms.Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Item description:Limit switch:    YesInner plate:             metalSpindle: 10mm Basic dimensions:            Width: 54cm, depth: 45cm, height 15cmSpecial feature:           Chassis and sub-chassis with acoustic matHousing:The housing is made of MDF and consists of two individual parts, the housing and the housing base. They are connected to each other using screws. It was professionally finished with several coats of high gloss varnish sealed and polished with appropriate intermediate sanding. This makes the surface extremely scratch-resistant. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm brushed and demagnetized stainless steel with labeling for both switches.Ortofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Large power supply:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply.Performance bottlenecks and heating no longer occur.Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance. Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Hood to be placed on the substructure: 170Cartridge MM system including installation:Ortofon 2M Red Verso (elliptical): 110 Ortofon 2M Blue Verso (elliptical, naked): 240 Ortofon 2M Bronze Verso (Fineline): 390Ortofon 2M Black Verso (Shibata): 599Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699 Cartridge MC system including installation:Audio-technica AT-OC9XEB (elliptical): 279Audio-technica AT-OC9XEN (elliptical, naked): 369Audio-technica AT33EV(elliptical, naked): 499Audio-technica ATPTG/II (microlinear): 599Audio-technica AT33SA (Shibata): 799 The housing is made of MDF and consists of two individual parts, the housing and the housing base. They are connected to each other using screws. It was professionally finished with several coats of high gloss varnish sealed and polished with appropriate intermediate sanding. This makes the surface extremely scratch-resistant. The connection panel for all required cable connections is located on the back. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your Herstellernummer nicht zutreffend Marke Restaurierter Thorens EAN Nicht zutreffend Modell TD 147

Restaurierter Thorens TD147 Turntable With Vogelaugenfurnier BlackThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound Germany Restored Thorens TD-147 stainless steel,Black birds eye veneer with high-gloss finishAlso possible with different SME tonearms.Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Item description:Limit switch:    YesInner plate:             metalSpindle: 10mm Basic dimensions:            Width: 54cm, depth: 45cm, height 15cmSpecial feature:           Chassis and sub-chassis with acoustic matHousing:The housing is made of MDF and consists of two individual parts, the housing and the housing base. They are connected to each other using screws. It was professionally finished with several coats of high gloss varnish sealed and polished with appropriate intermediate sanding. This makes the surface extremely scratch-resistant. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm brushed and demagnetized stainless steel with labeling for both switches.Ortofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable: Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Large power supply:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply.Performance bottlenecks and heating no longer occur. Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Hood to be placed on the substructure: 170Cartridge MM system including installation:Ortofon 2M Red Verso (elliptical): 110 Ortofon 2M Blue Verso (elliptical, naked): 240 Ortofon 2M Bronze Verso (Fineline): 390Ortofon 2M Black Verso (Shibata): 599Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699 Cartridge MC system including installation:Audio-technica AT-OC9XEB (elliptical): 279Audio-technica AT-OC9XEN (elliptical, naked): 369Audio-technica AT33EV(elliptical, naked): 499Audio-technica ATPTG/II (microlinear): 599Audio-technica AT33SA (Shibata): 799 The housing is made of MDF and consists of two individual parts, the housing and the housing base. They are connected to each other using screws. It was professionally finished with several coats of high gloss varnish sealed and polished with appropriate intermediate sanding. This makes the surface extremely scratch-resistant. The connection panel for all required cable connections is located on the back. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your Herstellernummer nicht zutreffend Marke Restaurierter Thorens EAN Nicht zutreffend Modell TD 147

Restored Thorens TD 147 Turntable Frame Vogelaugenfurnier BlueThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA or Japan)Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay! RESTORED by ART-AND-SOUND Restored THORENS TD147 stainless steel editionFrame with high-gloss blue birds eye veneerOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Operating voltage can be selected for each countrySemi-automatic with belt driveLimit switch and lift functionPickup: Ortofon VinylMaster AlphaBasic dimensions: 45cm x 36cm x 18cmSubchassis with acoustic matAccessories included: power supply, plate weight, audio RCA cable Item description:Limit switch:      YesInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmHousing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It has been professionally coated with birds eye veneer and several coats of high gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Ortofon VM Alpha cartridge (included):With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot.Audio cable:Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Large power supply:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply.Performance bottlenecks and heating no longer occur.Suspension:The spring elements were replaced with new ones.Spikes:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. --------The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood big (for placing on the substructure): 170Device feet made of stainless steel 43mm x 17mm (Image 6 and 7): 90Cartridge MM system including installation: Ortofon 2M Red (elliptical): 99 Ortofon 2M Blue (elliptical, naked): 220 Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599 AUDIO-TECHNICA VM 740ML (Microlinear): 339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (special line): 699 Cartridge MC System including installation: AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799AUDIO-TECHNICA OC9XML (Microlinear): 599AUDIO TECHNICA OC9XSH (Shibata): 699AUDIO TECHNICA OC9XSL (Special Line Contact): 799With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By Herstellernummer nicht zutreffend Marke Thorens - restauriert von art-and-sound EAN Nicht zutreffend Modell TD 147

This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA or Japan)Individual production! Please note the processing time stated on eBay!Individual production! Please note the processing time specified on Ebay! RESTORED by ART-AND-SOUND Restored THORENS TD147 stainless steel editionFrame with blue birds eye veneer high glossOur record players are lovingly assembled, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality cases are restored or newly manufactured using skilled craftsmanship.Electrical components are checked, moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Operating voltage selectable for each countrySemi-automatic with belt driveLimit switch and lift functionCartridge: Ortofon VinylMaster AlphaBasic dimensions: 45cm x 36cm x 18cmSubchassis with acoustic matAccessories included: power supply, plate weight, audio cinch cable Item description:Limit switch:      YesInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx.18cmHousing:The housing consists of 25 mm MDF side panels and a 16 mm thick base made of the same material. It has been professionally coated with birds eye veneer and finished with several layers of high gloss varnish sealed and polished with appropriate intermediate sanding. On the back there is the connection panel for all required cable connections.Ortofon VM Alpha cartridge (included):With the VM series, Ortofon has long created the reference MM cartridge; the long production time and the characteristic needle body are known all over the world. The VM Alpha is the entry-level model in the series and is a great entry-level system for mid-priced turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next higher needle slot.Audio cable:Ready-made analog audio cinch cable for wiring record players! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact reliability and corrosion protection are guaranteed by the 24-carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality.Large power supply:A new power supply is included in delivery. This power supply has twice the power of the original power supply.Performance bottlenecks and heating no longer occur.Suspension:The spring elements were replaced with new ones.Spikes:To decouple the record player from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record rests smoothly on the platter and runs smoothly. This record weight is in the middle weight class. It adds just enough weight to dampen the vibrations of the plate without putting strain on the bearing bushes. The suspension of the Thorens subchassis was readjusted accordingly. By using it, you increase the sound performance of your system. --------The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood large (to be placed on the substructure): 170Stainless steel feet 43mm x 17mm (Picture 6 and 7): 90Cartridge MM system including installation: Ortofon 2M Red (elliptical): 99 Ortofon 2M Blue (elliptical, naked): 220 Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599 AUDIO-TECHNICA VM 740ML (Microlinear): 339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (special line): 699 Cartridge MC System including installation: AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799AUDIO-TECHNICA OC9XML (Microlinear): 599AUDIO TECHNICA OC9XSH (Shibata): 699AUDIO TECHNICA OC9XSL (Special Line Contact): 799With the VM series, Ortofon has long created the reference MM cartridge; the long production time and the characteristic needle body are known all over the world. The VM Alpha is the entry-level model in the series and is a great entry-level system for mid-priced turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next higher needle slot. With a weight of 310g, it ensures that the record rests smoothly on the platter and runs smoothly. This record weight is in the middle weight class. It adds just enough weight to dampen the vibrations of the plate without putting strain on the bearing bushes. The suspension of the Thorens subchassis was readjusted accordingly. By using it, you increase the sound p

Thorens Mat Edition Turntable Slipmat Td 145 146 147 160 165 166The description of this item has been automatically translated. If you have any questions, please feel free to contact us.Original ThorensTurntable support with large center holefor Thorens TD145, 146, 147, 160, 165, 166cleanedOriginal Thorens Turntable support with large center hole for Thorens TD145, 146, 147, 160, 165, 166 cleaned Marke Thorens EAN Nicht zutreffend Markenkompatibilität Thorens Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland Produktart Tellermatte

Restored Thorens TD 147 Turntable Veneer High GlossThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay!This turntable is also suitable for use in the USA.RESTORED by ART-AND-SOUND 147 in precious wood veneerDesigner piece - design product - designer productWITH A FIGHTING WEIGHT OF OVER 10 KG!!!Our turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Please note! The veneer image is different and differs from the article photo! Please note! The veneer picture is different and differs from the article photo!Item description:Limit switch:    YesInner plate:             metalSpindle: 10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmSpecial feature:           Chassis and sub-chassis with acoustic matHousing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It has been professionally coated with precious wood veneer and several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm aluminum, black anodizedOrtofon VM Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM is the entry into the series and is a great entry-level system for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Power adapter:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply.Performance bottlenecks and heating no longer occur. The turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes.Resonances and feedback are thus effectively prevented. New drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The Turntable covers become not with Hinges attached, rather only put on.The following parts are available as accessories and not included in this auction: The turntable covers are not fixed, but just put on.Cartridge MM system including installation: The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It has been professionally coated with precious wood veneer and several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the pl Herstellernummer nicht zutreffend Marke Thorens - restauriert von art-and-sound EAN Nicht zutreffend Modell TD 147

Individual production! Please note the processing time stated on eBay!This turntable is also suitable for use in the USA.RESTORED by ART-AND-SOUND 147 in precious wood veneerDesigner piece - design product - designer productWITH A FIGHTING WEIGHT OF OVER 10 KG!!!Our record players are lovingly assembled, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality cases are restored or newly manufactured using skilled craftsmanship.Electrical components are checked, moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Please note! The veneer pattern varies and differs from the product photo! Please note! The veneer picture is different and differs from the article photo!Item description:Limit switch:    YesInner plate:             metalSpindle: 10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx.18cmSpecial feature:           Chassis and subchassis with acoustic matHousing:The housing consists of 25 mm MDF side panels and a 16 mm thick base made of the same material. It was professionally coated with precious wood veneer and several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. On the back there is the connection panel for all required cable connections.Cover plate:Cover plate made of 1mm aluminum, black anodizedOrtofon VM Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge; the long production time and the characteristic needle body are known all over the world. The VM is the entry-level model in the series and is a great entry-level system for mid-priced turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next available stylus insert. Audio cable:Branded cables. Ready-made analog audio cinch cable for wiring record players! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact reliability and corrosion protection are guaranteed by the 24-carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality.Power supply:A new power supply is included in delivery. This power supply has twice the power of the original power supply.Performance bottlenecks and heating no longer occur. The turntable:In five complex and time-consuming steps, the turntable is polished to a high gloss.The high gloss polish gives your record player a unique look.With surface sealing through a special protective coating, against repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:To decouple the record player from low-frequency vibrations, The chassis is equipped with height-adjustable spikes.Resonances and feedback are thus effectively prevented. New drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).New stainless steel record weight:With a weight of 310g, it ensures that the record rests smoothly on the platter and runs smoothly. This record weight is in the middle weight class. It adds just enough weight to dampen the vibrations of the plate without putting strain on the bearing bushes. The suspension of the Thorens subchassis was readjusted accordingly. By using it, you increase the sound performance of your system.following Parts are as Accessoriesör receiveältlich and not ingredient this auction:The Turntable covers become not with Hinges attached, rather only placed.The following parts are available as accessories and not included in this auction: The turntable covers are not fixed, but just put on.Cartridge MM system including installation: The housing consists of 25 mm MDF side panels and a 16 mm thick base made of the same material. It was professionally coated with precious wood veneer and several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. On the back there is the connection panel for all required cable connections. Branded cables. Ready-made analog audio cinch cable for wiring record players! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact reliability and corrosion protection are guaranteed by the 24-carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality. With a weight of 310g, it ensures that the record rests smoothly on the p

Restored Thorens TD 147 Turntable Frame With Vogelaugenfurnier BlueThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA or Japan)Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay! RESTORED by ART-AND-SOUND Restored THORENS TD147 black editionFrame with high-gloss blue birds eye veneerOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Operating voltage can be selected for each countrySemi-automatic with belt driveLimit switch and lift functionPickup: Ortofon VinylMaster AlphaBasic dimensions: 45cm x 36cm x 18cmSubchassis with acoustic matAccessories included: power supply, plate weight, audio RCA cable Item description:Limit switch:      YesInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmHousing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It has been professionally coated with birds eye veneer and several coats of high gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Ortofon VM Alpha cartridge (included):With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot.Audio cable:Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Large power supply:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply.Performance bottlenecks and heating no longer occur.Suspension:The spring elements were replaced with new ones.Spikes:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. --------The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood big (for placing on the substructure): 170Device feet made of stainless steel 43mm x 17mm (Image 8 and 9): 90Cartridge MM system including installation: Ortofon 2M Red (elliptical): 99 Ortofon 2M Blue (elliptical, naked): 220 Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599 AUDIO-TECHNICA VM 740ML (Microlinear): 339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (special line): 699 Cartridge MC System including installation: AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799AUDIO-TECHNICA OC9XML (Microlinear): 599AUDIO TECHNICA OC9XSH (Shibata): 699AUDIO TECHNICA OC9XSL (Special Line Contact): 799With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By Herstellernummer nicht zutreffend Marke Thorens - restauriert von art-and-sound EAN Nicht zutreffend Modell TD 147

Restored Thorens TD 147 Turntable Frame With Vogelaugenfurnier BlackThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220-240V/50Hz or 100-130V/60Hz (for example UNITED STATES)!RESTORED by ART-AND-SOUND 147in black birds eye veneer and high-gloss lacquer finish WITH A FIGHTING WEIGHT OF OVER 10 KG!!!Our turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Item description:Limit switch:    YesInner plate:             metalSpindle: 10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmSpecial feature:           Chassis and sub-chassis with acoustic matNew housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It has been professionally coated with precious wood veneer and several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.New faceplate:New cover plate made of 1mm brushed stainless steel (start/stop switch and lift switch are labeled)New Ortofon VinylMaster Alpha cartridgeNew audio cable:Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Large power supply:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply.Performance bottlenecks and heating no longer occur.The turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.New spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes.Resonances and feedback are thus effectively prevented. New drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. --------The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood small (to be placed on the frame):Hood big (for placing on the substructure):The following parts are available as accessories and not included in this auction:Hood small (to put on the housing):    Hood large (to put on the base):         Cartridge MM systems including installation:Ortofon 2M Red (elliptical): 110Ortofon 2M Blue (elliptical, naked): 220Ortofon 2M Bronze (fine line): 360The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It has been professionally coated with precious wood veneer and several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs sm Herstellernummer nicht zutreffend Marke Thorens - restauriert von art-and-sound EAN Nicht zutreffend Modell TD 147

Restored Thorens TD147 Turntable Black And 100 Jähriges oak WoodThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220/230V/50Hz or 110/120V/50/60Hz (for example USA and world wide)Individual production! Please note the processing time stated on Ebay!RESTORED by ART-AND-SOUND Restored 147 in a solid oak frame(the wood grain varies)Wood is a natural product. Please note that the grain is always different. After purchasing, you will receive various housing variants from which you can choose your housing. It will always be made of hundred-year-old oak.Our record players are lovingly put together and assembled by hand. Each of them is unique. The housings are newly manufactured using qualified craftsmanship. Electronic components are checked and replaced if necessary. bAll moving parts are oiled and wearing parts are replaced. A final endurance test rounds off the complex work.frame made from 100-year-old oak wood Wood with history...The old oak wood is probably from round wood that was felled in the Waldkirch area and stored in the “Sailerlenzen” farm. This farm was probably built around 1780 - 1800. This farm burned down in 1902 and the wood was saved from the flames at that time. In their first life, the “logs” were the outside walls of old houses; they were mostly hewn by hand and are approx. 105-120 years old.Item description:Limit switch:     YesInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmSpecial feature:          Subchassis with vibration-absorbing mat Housing:The housing consists of 25mm thick side panels made of solid oak wood (oiled) and a 16mm thick base made of MDF. The connection panel for all required cable connections is located on the back.Cover plate:original cover plate, black with letteringOrtofon VinylMaster Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a very good entry-level system for turntables in this price range. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the sound quality with the next higher needle slot. Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Power adapter:The scope of delivery includes a new power supply with double power and overheating protection.Turntable: The turntable is made in five complex and time-consuming steps polished to a high shine.The high gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.Spikes made of chrome-plated stainless steel: So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood big (for placing on the substructure):    180 Cartridge MM system including installation: ORTOFON 2M Red (elliptical):      129ORTOFON 2M Blue (elliptical, naked):        249ORTOFON 2M Bronze (Fineline): 399 ORTOFON 2M Black (Shibata):     649 AUDIO-TECHNICA VM 740ML (Microlinear):           339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (special line):    699 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked):   369 AUDIO-TECHNICA AT-33EV (elliptical):                   499AUDIO-TECHNICA AT-33PTG/II (Microlinear):         599AUDIO-TECHNICA AT-33SA (Shibata):                      799SME tonearms (with different pickups to choose from):SME 3009 Improved (fixed headshell): 690SME 3009 S2 Improved (replaceable headshell): 690SME Series III (replaceable tonearm tube): 690With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a very good entry-level system for turntables in this price range. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the sound quality with the next higher needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you incr Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 147 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Individuelle Anfertigung! Bitte beachten Sie, die bei Ebay angegebene Bearbeitungszeit! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA) ACHTUNG! Es gilt folgende Änderung! Der Plattenspieler-Teller wird nicht mehr in poliert, sondern in schwarz matt geliefert!DANGER! The following change applies! The turntable-plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art-and-Sound Germany Bei Selbstabholung 70,00 € Rabatt!RESTAURIERT von ART-AND-SOUND Restaurierter THORENS TD 147 Wurzelholzfurnier und Hochglanzlackierung Unsere Plattenspieler werden in liebevoller Handarbeit zusammengestellt, modifiziert und montiert. Jeder von ihnen ist ein Unikat und unterscheidet sich in Modell, Farbe, Furnier-maserung. Die hochwertigen Gehäuse werden in qualifizierter Handwerksarbeit restauriert oder neu angefertigt.Elektrische Bauteile werden überpüft, beweglichen Teile geölt und Verschleißteile ausgetauscht.Einen abschließender Dauerlauftest runden die aufwendigen Arbeiten ab. Artikelbeschreibung: Endabschaltung: Ja Innenteller: MetallLagerdorn: 10mm Grundmaße: Breite: 54cm, Tiefe: 45cm, Höhe 15cmBesonderheit: Chassis und Subchassis mit Akustikmmatte Neues Gehäuse: Das Gehäuse ist aus MDF gefertigt und besteht aus zwei einzelnen Teilen, dem Gehäuse und dem Gehäuseboden. Sie werden durch Schrauben miteinander verbunden. Es wurde professionell mit 7 Lagen Hochglanzlack bei entsprechenden Zwischenschliffen versiegelt und poliert (extrem kratzfest) An der Rückseite befindet sich das Anschlusspanel für alle benötigten Kabelverbindungen.New faceplate:Neue Deckplatte aus 1mm Aluminium, schwarz eloxiert Neuer Tonabnehmer Ortofon OM 5E:Das Ortofon OM5E ist ein vollwertiger Tonabnehmer. Es überzeugt durch Temperament und einen neutralen Grundcharakter. Das OM5E verfügt über einen elliptischen Stift, der eine ausgewogene und verzerrungsfreie Wiedergabe ermöglicht.Neues Audiokabel:Markenkabel von Oehlbach. Fertig konfektioniertes analoges Audio-Cinchkabel für die Verkabelung von Plattenspielern! Durch den besonders hochwertigen Innenleiter aus sauerstofffreiem Kupfer (OFC) sorgt dieses Qualitätskabel für eine naturgetreue Signalübertragung. Kontaktsicherheit und Korrosionsschutz ist über die 24 Karat vergoldeten Steckerkontakte garantiert. Das Kabel hat ein neutrales Klangbild mit guter Dynamik und Räumlichkeit. Plattenteller: Der Plattenteller ist schwarz matt lackiert. Er verleiht Ihrem Plattenspieler eine dauerhafte und dezent wirkende Eleganz.Neue Spikes aus verchromten Edelstahl: Damit der Plattenspieler von niederfrequenten Schwingungen entkoppelt wird, ist das Chassis mit höhenverstellbaren Spikes ausgestattet. Resonanzen und Rückkopplungen werden somit effektiv verhindert. Neuer Antriebsriemen:Dieser Antriebsriemen wird nach den ursprünglichen Thorens Spezifikationen (gleiches Material und gleiche Abmessungen) gefertigt.Neues Schallplattengewicht aus Edelstahl:Mit einem Gewicht von 310g sorgt es dafür, dass die Schallplatte glatt auf dem Teller aufliegt und ruhig durchläuft. Dieses Schallplattengewicht spielt in der mittleren Gewichtsklasse. Es baut gerade soviel Gewicht auf, die Schwingungen der Platte zu dämpfen ohne die Lagerbuchsen zu beanspruchen. Die Federung des Thorens-Subchassis wurde entsprechend neu eingestellt. Durch seinen Einsatz erhöhen Sie die Klangleistung Ihrer Anlage. Folgende Teile sind als Zubehör erhältlich und nicht Bestandteil dieser Auktion: Haube klein (zum Aufsetzen auf die Zarge): 160 Haube groß (zum Aufsetzen auf den Unterbau): 180 The following parts are available as accessories and not included in this auction:Hood small (to put on the housing): 160Hood large (to put on the base): 180Cartridge MM System including installation: Ortofon 2M Red (elliptisch): 99 Ortofon 2M Blue (elliptisch, nackt): 190 Ortofon 2M Bronze (Fineline): 390 Ortofon 2M Black (Shibata): 599 AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (spezieller Line): 699 Cartridge MC System including installation: AUDIO-TECHNICA AT-33EV (elliptisch): 499 AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599 AUDIO-TECHNICA AT-33SA (Shibata): 799

Welcome to Audio/Video Archives, the largest home of audio literature available on eBay! This is a Reprint Review from 1984. It will have a full test of the item listed along with Specifications, Articles, Information and Commentary. The Picture is of the actual item. It will have a Test of the product, Specs, Commentary and Information about the item listed. It is a beautiful piece of Audio History. I have THOUSANDS more from every major brand of Audio from 1950 up to now. ---Satisfaction is GUARANTEED at AV Archives! Take a look at my feedback for satisfied customers! I have been open since 2007 and have sold THOUSANDS of Ads, Reviews, and Brochures to satisfied customers. ---I Ship Worldwide and combine shipping, each additional item is just $1 after the first is paid. ---Each Page is 8.5 by 11 unless otherwise noted in title. ---Single-Sided professional matte photo pages, unless otherwise noted in the title. ---These Ads and Reviews are perfect for framing and placed in your Audio Room. ---I have a HUGE Vinyl Record Store with Thousands of Collectable records, and MANY First Pressings/Audiophile LPs. Just click on my Vinyl Record Store link on the left under categories. Email me for any specific questions, You will hear back from me usually within 4 hours, THANK YOU! Greg Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.

Original Bowden Cable for Thorens Turntable Td 145 146 147 160 165 166The description of this item has been automatically translated. If you have any questions, please feel free to contact us.Bowden cable / cable for tonearm liftfor 145, 146, 147, 160, 165, 166 and model variantsTotal length approx. 24.7mmItem photo is an example photo and corresponds to the item offeredBowden cable / cable for tonearm lift for 145, 146, 147, 160, 165, 166 and model variants Total length approx. 24.7mm Item photo is an example photo and corresponds to the item offered Marke Thorens Markenkompatibilität Für Thorens Produktart Bowdenzug EAN Nicht zutreffend