Restored Thorens TD 147 Turntable With WurzelholzfurnierThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound Germany RESTORED by ART-AND-SOUND Restored 147 burl wood veneer and high-gloss varnishOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Item description:Limit switch:     YesInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 54cm, depth: 45cm, height 15cmSpecial feature:           Chassis and sub-chassis with acoustic matNew housing:The housing is made of MDF and consists of two individual parts, the housing and the housing base. They are connected to each other using screws.It was professionally finished with 7 coats of high gloss varnish sealed and polished with appropriate intermediate sanding (extremely scratch-resistant)The connection panel for all required cable connections is located on the back.New faceplate:New cover plate made of 1mm aluminum, black anodizedNew Ortofon OM 5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.New audio cable:Branded cable from Oehlbach. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance.New spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes.Resonances and feedback are thus effectively prevented. New drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood small (to be placed on the frame): 160   Hood big (to be placed on the substructure): 180The following parts are available as accessories and not included in this auction:Hood small (to put on the housing): 160Hood large (to put on the base):  180Cartridge MM system including installation: Ortofon 2M Red (elliptical): 99 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599AUDIO-TECHNICA VM 740ML (Microlinear): 339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (special line): 699 Cartridge MC System including installation: AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799Branded cable from Oehlbach. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your Herstellernummer nicht zutreffend Marke Thorens - restauriert von art-and-sound EAN Nicht zutreffend Modell TD 147

Welcome to Audio/Video Archives, the largest home of audio literature available on eBay! This is a Reprint Review from 1984. It will have a full test of the item listed along with Specifications, Articles, Information and Commentary. The Picture is of the actual item. It will have a Test of the product, Specs, Commentary and Information about the item listed. It is a beautiful piece of Audio History. I have THOUSANDS more from every major brand of Audio from 1950 up to now. ---Satisfaction is GUARANTEED at AV Archives! Take a look at my feedback for satisfied customers! I have been open since 2007 and have sold THOUSANDS of Ads, Reviews, and Brochures to satisfied customers. ---I Ship Worldwide and combine shipping, each additional item is just $1 after the first is paid. ---Each Page is 8.5 by 11 unless otherwise noted in title. ---Single-Sided professional matte photo pages, unless otherwise noted in the title. ---These Ads and Reviews are perfect for framing and placed in your Audio Room. ---I have a HUGE Vinyl Record Store with Thousands of Collectable records, and MANY First Pressings/Audiophile LPs. Just click on my Vinyl Record Store link on the left under categories. Email me for any specific questions, You will hear back from me usually within 4 hours, THANK YOU! Greg Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.

Restaurierter Thorens TD147 Turntable With Vogelaugenfurnier IN Dark BlueThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound Germany Restored Thorens TD-147 stainless steel, dark blue birds eye veneer with high-gloss finishAlso possible with different SME tonearms.Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Item description:Limit switch:    YesInner plate:             metalSpindle: 10mm Basic dimensions:            Width: 54cm, depth: 45cm, height 15cmSpecial feature:           Chassis and sub-chassis with acoustic matHousing:The housing is made of MDF and consists of two individual parts, the housing and the housing base. They are connected to each other using screws. It was professionally finished with several coats of high gloss varnish sealed and polished with appropriate intermediate sanding. This makes the surface extremely scratch-resistant. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm brushed and demagnetized stainless steel with labeling for both switches.Ortofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Large power supply:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply.Performance bottlenecks and heating no longer occur.Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance. Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Hood to be placed on the substructure: 170Cartridge MM system including installation:Ortofon 2M Red Verso (elliptical): 110 Ortofon 2M Blue Verso (elliptical, naked): 240 Ortofon 2M Bronze Verso (Fineline): 390Ortofon 2M Black Verso (Shibata): 599Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699 Cartridge MC system including installation:Audio-technica AT-OC9XEB (elliptical): 279Audio-technica AT-OC9XEN (elliptical, naked): 369Audio-technica AT33EV(elliptical, naked): 499Audio-technica ATPTG/II (microlinear): 599Audio-technica AT33SA (Shibata): 799 The housing is made of MDF and consists of two individual parts, the housing and the housing base. They are connected to each other using screws. It was professionally finished with several coats of high gloss varnish sealed and polished with appropriate intermediate sanding. This makes the surface extremely scratch-resistant. The connection panel for all required cable connections is located on the back. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your Herstellernummer nicht zutreffend Marke Restaurierter Thorens EAN Nicht zutreffend Modell TD 147

Thorens Mat Edition Turntable Slipmat Td 145 146 147 160 165 166The description of this item has been automatically translated. If you have any questions, please feel free to contact us.Original ThorensTurntable support with large center holefor Thorens TD145, 146, 147, 160, 165, 166cleanedOriginal Thorens Turntable support with large center hole for Thorens TD145, 146, 147, 160, 165, 166 cleaned Marke Thorens EAN Nicht zutreffend Markenkompatibilität Thorens Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland Produktart Tellermatte

Restaurierter Thorens TD147 Turntable With Vogelaugenfurnier BlackThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound Germany Restored Thorens TD-147 stainless steel,Black birds eye veneer with high-gloss finishAlso possible with different SME tonearms.Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Item description:Limit switch:    YesInner plate:             metalSpindle: 10mm Basic dimensions:            Width: 54cm, depth: 45cm, height 15cmSpecial feature:           Chassis and sub-chassis with acoustic matHousing:The housing is made of MDF and consists of two individual parts, the housing and the housing base. They are connected to each other using screws. It was professionally finished with several coats of high gloss varnish sealed and polished with appropriate intermediate sanding. This makes the surface extremely scratch-resistant. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm brushed and demagnetized stainless steel with labeling for both switches.Ortofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable: Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Large power supply:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply.Performance bottlenecks and heating no longer occur. Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Hood to be placed on the substructure: 170Cartridge MM system including installation:Ortofon 2M Red Verso (elliptical): 110 Ortofon 2M Blue Verso (elliptical, naked): 240 Ortofon 2M Bronze Verso (Fineline): 390Ortofon 2M Black Verso (Shibata): 599Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699 Cartridge MC system including installation:Audio-technica AT-OC9XEB (elliptical): 279Audio-technica AT-OC9XEN (elliptical, naked): 369Audio-technica AT33EV(elliptical, naked): 499Audio-technica ATPTG/II (microlinear): 599Audio-technica AT33SA (Shibata): 799 The housing is made of MDF and consists of two individual parts, the housing and the housing base. They are connected to each other using screws. It was professionally finished with several coats of high gloss varnish sealed and polished with appropriate intermediate sanding. This makes the surface extremely scratch-resistant. The connection panel for all required cable connections is located on the back. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your Herstellernummer nicht zutreffend Marke Restaurierter Thorens EAN Nicht zutreffend Modell TD 147

Restored Thorens TD 147 Turntable Frame With Vogelaugenfurnier BlackThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220-240V/50Hz or 100-130V/60Hz (for example UNITED STATES)!RESTORED by ART-AND-SOUND 147in black birds eye veneer and high-gloss lacquer finish WITH A FIGHTING WEIGHT OF OVER 10 KG!!!Our turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Item description:Limit switch:    YesInner plate:             metalSpindle: 10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmSpecial feature:           Chassis and sub-chassis with acoustic matNew housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It has been professionally coated with precious wood veneer and several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.New faceplate:New cover plate made of 1mm brushed stainless steel (start/stop switch and lift switch are labeled)New Ortofon VinylMaster Alpha cartridgeNew audio cable:Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Large power supply:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply.Performance bottlenecks and heating no longer occur.The turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.New spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes.Resonances and feedback are thus effectively prevented. New drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. --------The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood small (to be placed on the frame):Hood big (for placing on the substructure):The following parts are available as accessories and not included in this auction:Hood small (to put on the housing):    Hood large (to put on the base):         Cartridge MM systems including installation:Ortofon 2M Red (elliptical): 110Ortofon 2M Blue (elliptical, naked): 220Ortofon 2M Bronze (fine line): 360The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It has been professionally coated with precious wood veneer and several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs sm Herstellernummer nicht zutreffend Marke Thorens - restauriert von art-and-sound EAN Nicht zutreffend Modell TD 147

Restored Thorens TD 147 Turntable Frame With Vogelaugenfurnier BlueThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA or Japan)Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay! RESTORED by ART-AND-SOUND Restored THORENS TD147 black editionFrame with high-gloss blue birds eye veneerOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Operating voltage can be selected for each countrySemi-automatic with belt driveLimit switch and lift functionPickup: Ortofon VinylMaster AlphaBasic dimensions: 45cm x 36cm x 18cmSubchassis with acoustic matAccessories included: power supply, plate weight, audio RCA cable Item description:Limit switch:      YesInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmHousing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It has been professionally coated with birds eye veneer and several coats of high gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Ortofon VM Alpha cartridge (included):With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot.Audio cable:Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Large power supply:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply.Performance bottlenecks and heating no longer occur.Suspension:The spring elements were replaced with new ones.Spikes:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. --------The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood big (for placing on the substructure): 170Device feet made of stainless steel 43mm x 17mm (Image 8 and 9): 90Cartridge MM system including installation: Ortofon 2M Red (elliptical): 99 Ortofon 2M Blue (elliptical, naked): 220 Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599 AUDIO-TECHNICA VM 740ML (Microlinear): 339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (special line): 699 Cartridge MC System including installation: AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799AUDIO-TECHNICA OC9XML (Microlinear): 599AUDIO TECHNICA OC9XSH (Shibata): 699AUDIO TECHNICA OC9XSL (Special Line Contact): 799With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By Herstellernummer nicht zutreffend Marke Thorens - restauriert von art-and-sound EAN Nicht zutreffend Modell TD 147

Restored Thorens TD147 Turntable Black And 100 Jähriges oak WoodThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220/230V/50Hz or 110/120V/50/60Hz (for example USA and world wide)Individual production! Please note the processing time stated on Ebay!RESTORED by ART-AND-SOUND Restored 147 in a solid oak frame(the wood grain varies)Wood is a natural product. Please note that the grain is always different. After purchasing, you will receive various housing variants from which you can choose your housing. It will always be made of hundred-year-old oak.Our record players are lovingly put together and assembled by hand. Each of them is unique. The housings are newly manufactured using qualified craftsmanship. Electronic components are checked and replaced if necessary. bAll moving parts are oiled and wearing parts are replaced. A final endurance test rounds off the complex work.frame made from 100-year-old oak wood Wood with history...The old oak wood is probably from round wood that was felled in the Waldkirch area and stored in the “Sailerlenzen” farm. This farm was probably built around 1780 - 1800. This farm burned down in 1902 and the wood was saved from the flames at that time. In their first life, the “logs” were the outside walls of old houses; they were mostly hewn by hand and are approx. 105-120 years old.Item description:Limit switch:     YesInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmSpecial feature:          Subchassis with vibration-absorbing mat Housing:The housing consists of 25mm thick side panels made of solid oak wood (oiled) and a 16mm thick base made of MDF. The connection panel for all required cable connections is located on the back.Cover plate:original cover plate, black with letteringOrtofon VinylMaster Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a very good entry-level system for turntables in this price range. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the sound quality with the next higher needle slot. Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Power adapter:The scope of delivery includes a new power supply with double power and overheating protection.Turntable: The turntable is made in five complex and time-consuming steps polished to a high shine.The high gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.Spikes made of chrome-plated stainless steel: So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood big (for placing on the substructure):    180 Cartridge MM system including installation: ORTOFON 2M Red (elliptical):      129ORTOFON 2M Blue (elliptical, naked):        249ORTOFON 2M Bronze (Fineline): 399 ORTOFON 2M Black (Shibata):     649 AUDIO-TECHNICA VM 740ML (Microlinear):           339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (special line):    699 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked):   369 AUDIO-TECHNICA AT-33EV (elliptical):                   499AUDIO-TECHNICA AT-33PTG/II (Microlinear):         599AUDIO-TECHNICA AT-33SA (Shibata):                      799SME tonearms (with different pickups to choose from):SME 3009 Improved (fixed headshell): 690SME 3009 S2 Improved (replaceable headshell): 690SME Series III (replaceable tonearm tube): 690With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a very good entry-level system for turntables in this price range. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the sound quality with the next higher needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you incr Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 147 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD 147 Turntable Veneer High GlossThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay!This turntable is also suitable for use in the USA.RESTORED by ART-AND-SOUND 147 in precious wood veneerDesigner piece - design product - designer productWITH A FIGHTING WEIGHT OF OVER 10 KG!!!Our turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Please note! The veneer image is different and differs from the article photo! Please note! The veneer picture is different and differs from the article photo!Item description:Limit switch:    YesInner plate:             metalSpindle: 10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmSpecial feature:           Chassis and sub-chassis with acoustic matHousing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It has been professionally coated with precious wood veneer and several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm aluminum, black anodizedOrtofon VM Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM is the entry into the series and is a great entry-level system for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Power adapter:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply.Performance bottlenecks and heating no longer occur. The turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes.Resonances and feedback are thus effectively prevented. New drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The Turntable covers become not with Hinges attached, rather only put on.The following parts are available as accessories and not included in this auction: The turntable covers are not fixed, but just put on.Cartridge MM system including installation: The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It has been professionally coated with precious wood veneer and several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the pl Herstellernummer nicht zutreffend Marke Thorens - restauriert von art-and-sound EAN Nicht zutreffend Modell TD 147

This turntable is available in 220/230V/50Hz or 110/120V/50/60Hz inside (for example USA or Japan)Discount and more interesting offers from us... Take a look at... Art and Sound GermanyIndividual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay! Restored Thorens TD-147 stainless steel,Black birds eye veneer with high-gloss finishAlso possible with different SME tonearms.Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Item description:Limit switch:    YesInner plate:             metalSpindle: 10mm Basic dimensions:            Width: 54cm, depth: 45cm, height 15cmSpecial feature:           Chassis and sub-chassis with acoustic matHousing:The housing is made of MDF and consists of two individual parts, the housing and the housing base. They are connected to each other using screws. It was professionally finished with several coats of high gloss varnish sealed and polished with appropriate intermediate sanding. This makes the surface extremely scratch-resistant. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm brushed and demagnetized stainless steel with labeling for both switches.Pickup:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with the VM Alpha and then improve the quality by using the next higher needle slot with the appropriate needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Large power supply:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply.Performance bottlenecks and heating no longer occur. Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Hood to be placed on the substructure: 170Cartridge MM system including installation:Ortofon 2M Red Verso (elliptical): 110 Ortofon 2M Blue Verso (elliptical, naked): 240 Ortofon 2M Bronze Verso (Fineline): 390Ortofon 2M Black Verso (Shibata): 599Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699 Cartridge MC system including installation:Audio-technica AT-OC9XEB (elliptical): 279Audio-technica AT-OC9XEN (elliptical, naked): 369Audio-technica AT33EV(elliptical, naked): 499Audio-technica ATPTG/II (microlinear): 599Audio-technica AT33SA (Shibata): 799 The housing is made of MDF and consists of two individual parts, the housing and the housing base. They are connected to each other using screws. It was professionally finished with several coats of high gloss varnish sealed and polished with appropriate intermediate sanding. This makes the surface extremely scratch-resistant. The connection panel for all required cable connections is located on the back. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with the VM Alpha and then improve the quality byThe housing is made of MDF and consists of two individual parts, the housing and the housing base. They are connected to each other using screws. It was professionally finished with several coats of high gloss varnish sealed and polished with appropriate intermediate sanding. This makes the surface extremely scratch-resistant. The connection panel for all required cable connections is located on the back. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with the VM Alpha and then improve the quality by

Original Bowden Cable for Thorens Turntable Td 145 146 147 160 165 166The description of this item has been automatically translated. If you have any questions, please feel free to contact us.Bowden cable / cable for tonearm liftfor 145, 146, 147, 160, 165, 166 and model variantsTotal length approx. 24.7mmItem photo is an example photo and corresponds to the item offeredBowden cable / cable for tonearm lift for 145, 146, 147, 160, 165, 166 and model variants Total length approx. 24.7mm Item photo is an example photo and corresponds to the item offered Marke Thorens Markenkompatibilität Für Thorens Produktart Bowdenzug EAN Nicht zutreffend

Original Tone Arm Lift Turntable for Thorens Td 145 146 147 160 165 166The description of this item has been automatically translated. If you have any questions, please feel free to contact us.Tonearm lift  suitable for record players: 145, 146, 147, 160, 165, 166 and variantsTonearm lift  suitable for record players: 145, 146, 147, 160, 165, 166 and variants Herstellernummer nicht zutreffend Marke Thorens Markenkompatibilität Für Thorens Produktart Tonarmlift EAN Nicht zutreffend

Zu verkaufen ist ein Vintabe PlattenspielerThorens TD 147 mit brauner Holzzarge Das Gerät ist in einem hervorragenden Zustand und wurde mit neuem Riemen ausgestattet, die Lager mit Thorens-Spezialöl behandelt. Schöner Gleichlauf, keinerlei Brummen. Ausgestattet mit neuem Audiotechnika AT91. Die schöne Holzzarge hat keinerlei Macken oder sonstige Schäden. Ebenso ist die Haube völlig klar und ohne Kratzer. In diesem Zustand passt das Gerät in jedes Wohnzimmer. Die Grundkonzeption des TD 147 stammte noch aus den 70er Jahren. Das Laufwerk war baugleich mit dem TD 166, verfügte jedoch eine optoelektronische Endabschaltung. Als Tonarms kam der in anderen Modellreihen bewährte TP 16 Mk III mit wechselbarem Tonarmrohr zum Einsatz. Mit der speziellen Schwingungsdämpfung von Subchassis und Motorträgerplatte entsprach der TD 147 konstruktiv weitgehend dem TD 160 Super Im Vergleich zu diesem war er jedoch mit einer berührungslos arbeitenden, optoelektronischen Endabschaltung ausgestattet. Dies ist ein Privatverkauf, daher leider keine Garantie oder Rücknahme. Die einwandfreie Funktionalität wird jedoch zugesichert.Please note: This is a private sale, therefore no warranty or return. However the functionality is confirmed. For shipment outside Germany please ask for delivery cost and availability. Outside EU customs fees may apply.

Welcome to Audio/Video Archives, the largest home of audio literature available on eBay! This is a Reprint Review from 1984. It will have a full test of the item listed along with Specifications, Articles, Information and Commentary. The Picture is of the actual item. It will have a Test of the product, Specs, Commentary and Information about the item listed. It is a beautiful piece of Audio History. I have THOUSANDS more from every major brand of Audio from 1950 up to now. ---Satisfaction is GUARANTEED at AV Archives! Take a look at my feedback for satisfied customers! I have been open since 2007 and have sold THOUSANDS of Ads, Reviews, and Brochures to satisfied customers. ---I Ship Worldwide and combine shipping, each additional item is just $1 after the first is paid. ---Each Page is 8.5 by 11 unless otherwise noted in title. ---Single-Sided professional matte photo pages, unless otherwise noted in the title. ---These Ads and Reviews are perfect for framing and placed in your Audio Room. ---I have a HUGE Vinyl Record Store with Thousands of Collectable records, and MANY First Pressings/Audiophile LPs. Just click on my Vinyl Record Store link on the left under categories. Email me for any specific questions, You will hear back from me usually within 4 hours, THANK YOU! Greg Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.

Thorens TD 147 turntable for sale from my audio set. It is in perfect working condition. Please refer to separate listings for Sony ES series amps, preamp, CD , tuner, Nakamichi 700ZXL, Stax SRM-1/MK2 with Lambda pro ear speaker.If you are interested in buying the Sony set along with all other equipment, please message me and will consider a price reduction. It is a perfect addition to any audiophiles collection. The equipment has been used sparingly and been stored unused for a number of years. NOTE: AS IT IS ALL OLDER VINTAGE EQUIPMENT, IT WOULD BE A GOOD IDEA TO HAVE THE EQUIPMENT CHECKED AND SERVICED IF NEEDED AT A REPUTABLE AUDIO SERVICE CENTRE. NO RETURNS ARE ACCEPTED. PLEASE UNDERSTAND THAT IT IS CURRENTLY IN WORKING CONDITION AND NO WARRANTIES APPLY. It is perfect for those who want to experience the music as it was intended to be heard. This set is a must-have for anyone who loves audio equipment and wants to take their listening experience to the next level. I have been the proud owner of this equipment since about 1989. Enjoyed listening to many artists from classic rock to jazz fusion etc on this set. Please message me if you have any questions about any of the pieces or would like additional photos or videos. Could include the smaller speaker set and subwoofer as a courtesy with the complete set only. I Also depending on your music tastes, have lots of LPS.

Restored And Modified Thorens TD 147 Turntable VeneerThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220-240V/50Hz or 100-130V/60Hz (for example UNITED STATES)!RESTORED by ART-AND-SOUND Restored 147 wood veneer and high gloss finishWITH A FIGHTING WEIGHT OF OVER 10 KG!!!Our turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Item description:Limit switch:     YesInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 54cm, depth: 45cm, height 15cmSpecial feature:           Chassis and sub-chassis with acoustic matNew housing:The housing is made of MDF and consists of two individual parts, the housing and the housing base. They are connected to each other using screws.It was professionally finished with 7 coats of high gloss varnish sealed and polished with appropriate intermediate sanding (extremely scratch-resistant)The connection panel for all required cable connections is located on the back.New faceplate:New cover plate made of 1mm aluminum, black anodizedNew Ortofon OM 5E cartridge:With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 5E is the entry into the series and is a great entry-level system for mid-range turntables.The OM series from Ortofon is compatible with each other. So you can start with an OM 5E and then improve the quality with the appropriate needle insert by using the next needle insert.New audio cable:Branded cable from Oehlbach. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. The turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.New spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes.Resonances and feedback are thus effectively prevented. New drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood small (to be placed on the frame): eBay-item number 112401191474Hood big (for placing on the substructure):    eBay-item number 112411582098The following parts are available as accessories and not included in this auction:Hood small (to put on the housing):    German eBay-article number is 112401191474Hood large (to put on the base):            German eBay-article number is 112411582098Cartridge MM systems including installation:Ortofon 2M Red (elliptical): RRP €110 Ortofon 2M Blue (elliptical, naked): RRP €220 Ortofon 2M Bronze (fine line): RRP €360Ortofon OM 10 (elliptical): RRP €60Ortofon Vinyl Master Red (elliptical): RRP €225Ortofon Vinyl Master Blue (fine line): RRP €315Ortofon Vinyl Master Silver (Fritz Gyger): RRP €395Cartidge MC systems including installation:Ortofon MC 1 Turbo: RRP €220Ortofon MC 3 Turbo: RRP €380Quintet Red (elliptical): RRP €300Quinted Blue (fine line): RRP €430Quinted Bronze (Fritz Gyger): RRP €630Branded cable from Oehlbach. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your Herstellernummer nicht zutreffend Marke Thorens - restauriert von art-and-sound EAN Nicht zutreffend Modell TD 147

This turntable is available in 220-240V/50Hz or 100-130V/60Hz (for example UNITED STATES)!RESTORED by ART-AND-SOUND Restored 147 wood veneer and high gloss finishWITH A FIGHTING WEIGHT OF OVER 10 KG!!!Our turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Item description:Limit switch:     YesInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 54cm, depth: 45cm, height 15cmSpecial feature:           Chassis and sub-chassis with acoustic matNew housing:The housing is made of MDF and consists of two individual parts, the housing and the housing base. They are connected to each other using screws.It was professionally finished with 7 coats of high gloss varnish sealed and polished with appropriate intermediate sanding (extremely scratch-resistant)The connection panel for all required cable connections is located on the back.New faceplate:New cover plate made of 1mm aluminum, black anodizedNew Ortofon OM 5E cartridge:With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 5E is the entry into the series and is a great entry-level system for mid-range turntables.The OM series from Ortofon is compatible with each other. So you can start with an OM 5E and then improve the quality with the appropriate needle insert by using the next needle insert.New audio cable:Branded cable from Oehlbach. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. The turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.New spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes.Resonances and feedback are thus effectively prevented. New drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood small (to be placed on the frame): eBay-item number 112401191474Hood big (for placing on the substructure):    eBay-item number 112411582098The following parts are available as accessories and not included in this auction:Hood small (to put on the housing):    German eBay-article number is 112401191474Hood large (to put on the base):            German eBay-article number is 112411582098Cartridge MM systems including installation:Ortofon 2M Red (elliptical): RRP €110 Ortofon 2M Blue (elliptical, naked): RRP €220 Ortofon 2M Bronze (fine line): RRP €360Ortofon OM 10 (elliptical): RRP €60Ortofon Vinyl Master Red (elliptical): RRP €225Ortofon Vinyl Master Blue (fine line): RRP €315Ortofon Vinyl Master Silver (Fritz Gyger): RRP €395Cartidge MC systems including installation:Ortofon MC 1 Turbo: RRP €220Ortofon MC 3 Turbo: RRP €380Quintet Red (elliptical): RRP €300Quinted Blue (fine line): RRP €430Quinted Bronze (Fritz Gyger): RRP €630Branded cable from Oehlbach. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of yourBranded cable from Oehlbach. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your

Welcome to Audio/Video Archives, the largest home of audio literature available on eBay! This is a Reprint Review from 1984. It will have a full test of the item listed along with Specifications, Articles, Information and Commentary. The Picture is of the actual item. It will have a Test of the product, Specs, Commentary and Information about the item listed. It is a beautiful piece of Audio History. I have THOUSANDS more from every major brand of Audio from 1950 up to now. ---Satisfaction is GUARANTEED at AV Archives! Take a look at my feedback for satisfied customers! I have been open since 2007 and have sold THOUSANDS of Ads, Reviews, and Brochures to satisfied customers. ---I Ship Worldwide and combine shipping, each additional item is just $1 after the first is paid. ---Each Page is 8.5 by 11 unless otherwise noted in title. ---Single-Sided professional matte photo pages, unless otherwise noted in the title. ---These Ads and Reviews are perfect for framing and placed in your Audio Room. ---I have a HUGE Vinyl Record Store with Thousands of Collectable records, and MANY First Pressings/Audiophile LPs. Just click on my Vinyl Record Store link on the left under categories. Email me for any specific questions, You will hear back from me usually within 4 hours, THANK YOU! Greg Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.

Restored Thorens TD147 Turntable With Vogelaugenfurnier BlackThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220/230V/50Hz or 110/120V/50/60Hz inside (for example USA or Japan)Discount and more interesting offers from us... Take a look at... Art and Sound GermanyIndividual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay! Restored Thorens TD-147 stainless steel,Black birds eye veneer with high-gloss finishAlso possible with different SME tonearms.Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Item description:Limit switch:    YesInner plate:             metalSpindle: 10mm Basic dimensions:            Width: 54cm, depth: 45cm, height 15cmSpecial feature:           Chassis and sub-chassis with acoustic matHousing:The housing is made of MDF and consists of two individual parts, the housing and the housing base. They are connected to each other using screws. It was professionally finished with several coats of high gloss varnish sealed and polished with appropriate intermediate sanding. This makes the surface extremely scratch-resistant. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm brushed and demagnetized stainless steel with labeling for both switches.Pickup:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with the VM Alpha and then improve the quality by using the next higher needle slot with the appropriate needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Large power supply:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply.Performance bottlenecks and heating no longer occur. Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Hood to be placed on the substructure: 170Cartridge MM system including installation:Ortofon 2M Red Verso (elliptical): 110 Ortofon 2M Blue Verso (elliptical, naked): 240 Ortofon 2M Bronze Verso (Fineline): 390Ortofon 2M Black Verso (Shibata): 599Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699 Cartridge MC system including installation:Audio-technica AT-OC9XEB (elliptical): 279Audio-technica AT-OC9XEN (elliptical, naked): 369Audio-technica AT33EV(elliptical, naked): 499Audio-technica ATPTG/II (microlinear): 599Audio-technica AT33SA (Shibata): 799 The housing is made of MDF and consists of two individual parts, the housing and the housing base. They are connected to each other using screws. It was professionally finished with several coats of high gloss varnish sealed and polished with appropriate intermediate sanding. This makes the surface extremely scratch-resistant. The connection panel for all required cable connections is located on the back. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with the VM Alpha and then improve the quality by Herstellernummer nicht zutreffend Marke Thorens - restauriert von art-and-sound EAN Nicht zutreffend Modell TD 147

Restored Thorens TD147 Turntable With Vogelaugenfurnier IN Dark of BlueThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black! Restored Thorens TD-147 stainless steel, dark blue birds eye veneer with high-gloss finishAlso possible with different SME tonearms.Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Item description:Limit switch:    YesInner plate:             metalSpindle: 10mm Basic dimensions:            Width: 54cm, depth: 45cm, height 15cmSpecial feature:           Chassis and sub-chassis with acoustic matHousing:The housing is made of MDF and consists of two individual parts, the housing and the housing base. They are connected to each other using screws. It was professionally finished with several coats of high gloss varnish sealed and polished with appropriate intermediate sanding. This makes the surface extremely scratch-resistant. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm brushed and demagnetized stainless steel with labeling for both switches.Ortofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Large power supply:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply.Performance bottlenecks and heating no longer occur. Turntable:A matt black finish on the turntable gives your record player a lasting and discreet elegance.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Hood to be placed on the substructure: 170Cartridge MM system including installation:Ortofon 2M Red Verso (elliptical): 110 Ortofon 2M Blue Verso (elliptical, naked): 240 Ortofon 2M Bronze Verso (Fineline): 390Ortofon 2M Black Verso (Shibata): 599Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699 Cartridge MC system including installation:Audio-technica AT-OC9XEB (elliptical): 279Audio-technica AT-OC9XEN (elliptical, naked): 369Audio-technica AT33EV(elliptical, naked): 499Audio-technica ATPTG/II (microlinear): 599Audio-technica AT33SA (Shibata): 799 The housing is made of MDF and consists of two individual parts, the housing and the housing base. They are connected to each other using screws. It was professionally finished with several coats of high gloss varnish sealed and polished with appropriate intermediate sanding. This makes the surface extremely scratch-resistant. The connection panel for all required cable connections is located on the back. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your Herstellernummer nicht zutreffend Marke Thorens - restauriert von art-and-sound EAN Nicht zutreffend Modell TD 147

Restored Thorens TD147 Turntable With Vogelaugenfurnier IN Dark BlueThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220-230/50Hz or 110-120V/60Hz (for example USA and worldwide) Restored Thorens TD-147 stainless steel, dark blue birds eye veneer with high-gloss finishAlso possible with different SME tonearms.Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Item description:Limit switch:    YesInner plate:             metalSpindle: 10mm Basic dimensions:            Width: 54cm, depth: 45cm, height 15cmSpecial feature:           Chassis and sub-chassis with acoustic matHousing:The housing is made of MDF and consists of two individual parts, the housing and the housing base. They are connected to each other using screws. It was professionally finished with several coats of high gloss varnish sealed and polished with appropriate intermediate sanding. This makes the surface extremely scratch-resistant. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm brushed and demagnetized stainless steel with labeling for both switches.Pickup:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with the VM Alpha and then improve the quality by using the next higher needle slot with the appropriate needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Large power supply:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply.Performance bottlenecks and heating no longer occur. Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Hood to be placed on the substructure: 170Cartridge MM system including installation:Ortofon 2M Red Verso (elliptical): 110 Ortofon 2M Blue Verso (elliptical, naked): 240 Ortofon 2M Bronze Verso (Fineline): 390Ortofon 2M Black Verso (Shibata): 599Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699 Cartridge MC system including installation:Audio-technica AT-OC9XEB (elliptical): 279Audio-technica AT-OC9XEN (elliptical, naked): 369Audio-technica AT33EV(elliptical, naked): 499Audio-technica ATPTG/II (microlinear): 599Audio-technica AT33SA (Shibata): 799 The housing is made of MDF and consists of two individual parts, the housing and the housing base. They are connected to each other using screws. It was professionally finished with several coats of high gloss varnish sealed and polished with appropriate intermediate sanding. This makes the surface extremely scratch-resistant. The connection panel for all required cable connections is located on the back. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with the VM Alpha and then improve the quality by Herstellernummer nicht zutreffend Marke Thorens - restauriert von art-and-sound EAN Nicht zutreffend Modell TD 147

Restored Thorens TD147 Turntable With Vogelaugenfurnier BlackThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220/230V/50Hz or 110/120V/50/60Hz inside (for example USA or Japan)Discount and more interesting offers from us... Take a look at... Art and Sound GermanyIndividual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay! Restored Thorens TD-147 stainless steel,Black birds eye veneer with high-gloss finishAlso possible with different SME tonearms.Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Item description:Limit switch:    YesInner plate:             metalSpindle: 10mm Basic dimensions:            Width: 54cm, depth: 45cm, height 15cmSpecial feature:           Chassis and sub-chassis with acoustic matHousing:The housing is made of MDF and consists of two individual parts, the housing and the housing base. They are connected to each other using screws. It was professionally finished with several coats of high gloss varnish sealed and polished with appropriate intermediate sanding. This makes the surface extremely scratch-resistant. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm brushed and demagnetized stainless steel with labeling for both switches.Pickup:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with the VM Alpha and then improve the quality by using the next higher needle slot with the appropriate needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Large power supply:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply.Performance bottlenecks and heating no longer occur. Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Hood to be placed on the substructure: 170Cartridge MM system including installation:Ortofon 2M Red Verso (elliptical): 110 Ortofon 2M Blue Verso (elliptical, naked): 240 Ortofon 2M Bronze Verso (Fineline): 390Ortofon 2M Black Verso (Shibata): 599Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699 Cartridge MC system including installation:Audio-technica AT-OC9XEB (elliptical): 279Audio-technica AT-OC9XEN (elliptical, naked): 369Audio-technica AT33EV(elliptical, naked): 499Audio-technica ATPTG/II (microlinear): 599Audio-technica AT33SA (Shibata): 799 The housing is made of MDF and consists of two individual parts, the housing and the housing base. They are connected to each other using screws. It was professionally finished with several coats of high gloss varnish sealed and polished with appropriate intermediate sanding. This makes the surface extremely scratch-resistant. The connection panel for all required cable connections is located on the back. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with the VM Alpha and then improve the quality by Herstellernummer nicht zutreffend Marke Thorens - restauriert von art-and-sound EAN Nicht zutreffend Modell TD 147

Welcome to Audio/Video Archives, the largest home of audio literature available on eBay! This is a Reprint Review from 1984. It will have a full test of the item listed along with Specifications, Articles, Information and Commentary. The Picture is of the actual item. It will have a Test of the product, Specs, Commentary and Information about the item listed. It is a beautiful piece of Audio History. I have THOUSANDS more from every major brand of Audio from 1950 up to now. ---Satisfaction is GUARANTEED at AV Archives! Take a look at my feedback for satisfied customers! I have been open since 2007 and have sold THOUSANDS of Ads, Reviews, and Brochures to satisfied customers. ---I Ship Worldwide and combine shipping, each additional item is just $1 after the first is paid. ---Each Page is 8.5 by 11 unless otherwise noted in title. ---Single-Sided professional matte photo pages, unless otherwise noted in the title. ---These Ads and Reviews are perfect for framing and placed in your Audio Room. ---I have a HUGE Vinyl Record Store with Thousands of Collectable records, and MANY First Pressings/Audiophile LPs. Just click on my Vinyl Record Store link on the left under categories. Email me for any specific questions, You will hear back from me usually within 4 hours, THANK YOU! Greg Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.

Welcome to Audio/Video Archives, the largest home of audio literature available on eBay! This is a Reprint Review from 1984. It will have a full test of the item listed along with Specifications, Articles, Information and Commentary. The Picture is of the actual item. It will have a Test of the product, Specs, Commentary and Information about the item listed. It is a beautiful piece of Audio History. I have THOUSANDS more from every major brand of Audio from 1950 up to now. ---Satisfaction is GUARANTEED at AV Archives! Take a look at my feedback for satisfied customers! I have been open since 2007 and have sold THOUSANDS of Ads, Reviews, and Brochures to satisfied customers. ---I Ship Worldwide and combine shipping, each additional item is just $1 after the first is paid. ---Each Page is 8.5 by 11 unless otherwise noted in title. ---Single-Sided professional matte photo pages, unless otherwise noted in the title. ---These Ads and Reviews are perfect for framing and placed in your Audio Room. ---I have a HUGE Vinyl Record Store with Thousands of Collectable records, and MANY First Pressings/Audiophile LPs. Just click on my Vinyl Record Store link on the left under categories. Email me for any specific questions, You will hear back from me usually within 4 hours, THANK YOU! Greg Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.