DescriptionWhen I purchased the RX-5000 that I am currently using, I purchased a spare for the SME long arm, but I attached Saek to the other arm base, and in the end I tried installing this arm base several times. , it was stored almost unused. This item is for sale because there are no plans to use it in the future.Please understand that this is a used item with some small scratches before making your decision.Payment payoneerShipping japan post -Fedex *For FedEx / DHL shipping items, a person residing in the remote area will have to pay an additional shipping fee.Terms of Sale We can accept return within 60 days after you receive it. Please make sure to contact us first if you want to return it. It is buyers responsibility for the return shipping cost when sending back the item to us. The item has to be returned in the original condition from the time you received. No returns on products that show any evidences of use.International Buyers - Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.Conditions shown here are based on our standard.Please understand that the conditions of used items that have been stored in our warehouse changes by time.Listings that shows Working means that it confirmed working when we stored items in our warehouse, some items might stop working during the shipment or after delivery to you.(We double check if they are working before shipping them out) Pre-owned(used) items are used items, so please purchase if you acknowledge it.

MICRO SEIKI AX-6G Long arm base Turntable Tested and working

MICRO SEIKI AX-6G Long arm base Turntable Tested and working

PRODUCTS MICRO A-3L Sub Arm Base for DDL-100/DDL-120/DDL-150 Condition Overall, there are no noticeable scratches and it is shiny. Item Contents Manufacturer?MICRO Model?A-3L DDL-100/120/150 turntable with STAX UA-70/ortofon RMG309 long tone arm can be used with DDL-100/120/150 turntable. The subarm base enables to use the long tone arm of STAX UA-70/ortofon RMG309. Accessories All items in the photo are included. Please check them. PAYMENTSWe accept PayPal and all major Debit / Credit Cards. We can only ship your item after your payment clears. We ship within 10 days of payment. CHECKOUTPlease check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed. SHIPPINGPackages:Box and Bubblerup Packages usually leave our warehouse within 10 days of payment. Weekend orders will ship on Monday or Tuesday. We provide valid Tracking Numbers for all orders. International PackagesWe ship to all US Territories, Europe and Asia and Middle East and Australia and Canada including Guam and Hawaii.All our international packages ship under the Fedex or Japan Post or DHL. CUSTOMER SERVICEIf you have any questions or issues, we are at your service. You can email us anytime through eBay messages. RETURN INFORMATIONWe offer a standard FREE 30 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund. Customs dutyImport duties, taxes, and charges are not included in the item price or shipping cost.These charges are the buyers responsibility.Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.We will reply to your question or invoice within 3 days.We cant not reply gifts or unreasonable requests such as declared amount. Thank you for reading to the end!

????Including & Condition Details: As shown in photos. ????Shipping: FedEx MICRO SX-111FV Gunmetal Suction Turntable & Pump Unit RP-1110 The SX-111FV was sold in 1983 and uses a gunmetal/suction platter. FV stands for float and vacuum. The included air pump unit allows the turntable to be integrated with the suction system without any problems even if the record is slightly warped. It is equipped with an air bearing system that floats the turntable using air. ?ConditionEach part has been polished and cleaned. The dust cover is polished with a special abrasive depending on the level of scratches and is polished to enhance transparency. The platter and metal parts are polished to remove dirt and rust as much as possible. Dust Cover/Button and Panel Part/Gunmetal Platter/Arm Base ?The cover has some scratches/scratches, but there are no major scratches and it is transparent and in good condition. ?The buttons and panel parts are also shiny and have no lettering loss. ?The arm base is also in good condition with only minor scratches. ?There are no cracks or chips on the glass surface inside the frame. ?The gunmetal platter is shiny, but some fine metal tarnish remains. The suction rubber is soft and has no deterioration or tears. Cabinet ?There are some touch-ups for dullness and scratches, but overall there are no major scratches and it is shiny. ?All four insulators are functioning. The hinges are also undamaged and can be kept open. Air Pump?There is some leaning (floating) on ??the surface sheet on both sides of the button panel. In addition, there are scratches/scratches, but it is shiny. ?We tested the product for half a day to a day to check its operation. We have performed a comprehensive maintenance/operation check in preparation for this listing. We have measured the electronic parts, lubricated the spindle with oil, cleaned each contact, and adjusted each part. It is in a condition that you can use with confidence. TurntableWorks well - 33/45 rotation switching, speed adjustment rotates normally without any problems. The stability of rotation has been confirmed with the included stroboscope. - There are no problems with the start/stop button response. - All lights turn on. Air PumpWorks well - Connect the tube and press the SUCTION button to adsorb the record. - There are no problems with the light turning on. *This item is common to 50/60Hz. Product Details Manufacturer: MICRO Turntable Model Number: SX-111FV Pump Unit Model Number: RP-1110 Dimensions: 200mmW x 217mmH x 360mmD Weight: 6.3kg Accessories ?Dust cover ?Belt ?Arm Base (for A-1206 SME short arm) ?Pump unit (RP-1110) ?dedicated tube (already connected to RP-1110) ?power cord ?platter removal handle x 2 ?earth wire ?stroboscope (MICRO) ?instruction manual (copy) ?original box for the main unit (with internal cushioning material) ?transport screw for the pump unit (The pump unit will be shipped with the transport screw attached. Please remove the two red screws on the bottom before use.) ????Message from SellerHi, my name is Danny Chou. I live in Tokyo, Japan. I can speak quite fluent English :)I can source anything you want from Japan! Feel free to contact me anytime! ??Check Your AddressPlease check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed. ??Tracking & PackingPackages: Box or envelope and Bubble wrapWe provide valid Tracking Numbers for all orders.All our international packages will be shipped by FedEx or DHL. ??ReturnWe offer a standard FREE 60 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund. ????Customs DutyImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

MICRO SEIKI AX-6G Long arm base Turntable Tested and working

????Including & Condition Details: As shown in photos. ????Shipping: FedEx ? Condition/Maintenance details Output voltage adjusted +5V/+13.5V+140V We carry out maintenance in our shop. All parts are working properly. ????Message from SellerHi, my name is Danny Chou. I live in Tokyo, Japan. I can speak quite fluent English :)I can source anything you want from Japan! Feel free to contact me anytime! ??Check Your AddressPlease check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed. ??Tracking & PackingPackages: Box or envelope and Bubble wrapWe provide valid Tracking Numbers for all orders.All our international packages will be shipped by FedEx or DHL. ??ReturnWe offer a standard FREE 60 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund. ????Customs DutyImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

MICRO SEIKI BL-111 Gunmetal Platter Turntable w/ A-1206 SME Arm Base maintained From Japan DescriptionThe BL-111 is a masterpiece that pursues Micros high technology and perfection. In addition to the gunmetal turntable weighing 10kg, the arm base can be equipped with MICROs A1200 series. The player system weighs 36kg and is robustly built to withstand vibration. It has a good overall sound balance, and is still very popular among audio fans today. ?Condition: Each part has been polished and cleaned. The dust cover is polished with a special abrasive depending on the level of scratches, and is polished to enhance transparency. The platter and metal parts are polished to remove dirt and rust as much as possible. - The cover is clear and beautiful with no noticeable scratches. - Both the buttons and plate are shiny. - The platter also has minor scratches/dullness, but no major damage is visible and it is shiny. - The arm base is also shiny and in good condition. - There are scratches on the sides and the bottom of the back.Please check the images.There is no other noticeable damage and it is glossy.- The hinges are not worn out and can be kept open.- The rubber inside the insulator is slightly worn out, but it is elastic and functions without any problems. This is a used item that has been around for a long time.Please understand that there may be scratches, dullness, and signs of use due to aging and use before bidding. The criteria for judging the condition check column are selected by our staff based on certain standards of our company that handles vintage audio.Since there are individual differences in how people perceive the condition, there may be differences from your standards.Please check the images carefully and make your decision.We are also happy to answer any questions you may have about the condition, so please feel free to contact us. ? OperationWe have aged the item for half a day to a day to check its operation. In preparation for this listing, we have carried out a comprehensive maintenance/operation check.We measured the electronic parts, lubricated the spindle with oil, cleaned each contact, and adjusted each part. It is in a condition that you can use with confidence. Works well ?It rotates normally without any problems when switching between 33 and 45 RPM/adjusting the speed. The pulley rotates smoothly without any abnormal noises. The rotation stability has been confirmed with a stroboscope. ?All lights are on without any bulb burnouts. ?This item is compatible with 50/60Hz. ?Product detailsManufacturer: MICROModel number: BL-111External dimensions: Width 532 x Height 230 x Depth 440mmWeight: 36kg ?Accessories?Dust cover?Gunmetal platter?Thread?Platter removal bolt (non-OEM)?Arm base (for MICRO A1206 SME short arm)?Power cable?Earth wire?Stroboscope (MICRO MST-105)?Instruction manual (copy)ShippingWe will ship the item by FedEx, DHL, UPS, Japan Post (EMS/Airmail) and provide the tracking number. Shipping is only available to the address registered.Please note that any address not registered is not acceptable to ship. Shipping is possible from Monday to Friday.Saturdays, Sundays, and Japanese holidays are not available because the transportation company is closed.International Buyers - Please Note:Import duties and taxes are not included in the item price or shipping cost. Please check with your country’s customs office to determine these additional costs prior to bidding or buying. Additionally, if the delivery address is in a remote area, there may be additional charges by FedEx or DHL. If such charges occur, you may be asked to pay an additional $15 to $20.

MICRO SEIKI AX-6G Long arm base Turntable Tested and working

Micro Seiki A-1201 Arm Board Base For Turntable Tonearm BL 91 99 Etc.

????Including & Condition Details: As shown in photos. ????Shipping: FedEx ortofon 8N-TSW1000 PHONO Cable Approximately 1.2m There is no noticeable damage and it is glossy. ?ConditionOutputs without any problems. ?Product DetailsManufacturer: ortofonModel: 8N-TSW1000Total Length: Approximately 1.2m ????Message from SellerHi, my name is Danny Chou. I live in Tokyo, Japan. I can speak quite fluent English :)I can source anything you want from Japan! Feel free to contact me anytime! ??Check Your AddressPlease check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed. ??Tracking & PackingPackages: Box or envelope and Bubble wrapWe provide valid Tracking Numbers for all orders.All our international packages will be shipped by FedEx or DHL. ??ReturnWe offer a standard FREE 60 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund. ????Customs DutyImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

????Including & Condition Details: As shown in photos. ????Shipping: FedEx Product Description Brand, manufacturer: Tannoy Model number: Autograph Mini Color: Teak Size: 210 x 345 x 130 mm, 4 kg/ per unit Product ConditionI bought this in good condition a few years ago because I wanted a 300B single-tube amplifier with a low output and a soft sound. Ive used it carefully to compare with Yoshii9 and as a reference. Due to various circumstances, I needed to organize my speakers and decided to let them go. There are some small, inconspicuous scratches and signs of use, but it is clean and has no major scratches. The unit edges are also free of cracks and produce a beautiful tone.*There are a few inconspicuous cracks on one side of the saran net (my subjective opinion, but I dont think they affect the appearance or sound). *The instruction manual has a large stain but can be read without problems.*There is no original box, but we will carefully pack and ship it to you. ????Message from SellerHi, my name is Danny Chou. I live in Tokyo, Japan. I can speak quite fluent English :)I can source anything you want from Japan! Feel free to contact me anytime! ??Check Your AddressPlease check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed. ??Tracking & PackingPackages: Box or envelope and Bubble wrapWe provide valid Tracking Numbers for all orders.All our international packages will be shipped by FedEx or DHL. ??ReturnWe offer a standard FREE 60 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund. ????Customs DutyImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

MICRO SEIKI AX-6G Long arm base Turntable Tested and working

Micro Seiki A-1201 Arm Board Base For Turntable Tonearm BL 91 99 Etc.

????Including & Condition Details: As shown in photos. ????Shipping: FedEx MICRO SEIKI SX-1500FVG Turntable (RB-1500 / RY-1500D / RS-1500 / RP-1110 Set) The SX-1500FVG is the top of the 1500 series, combining suction type and air-bearing systems. You can choose from a variety of parts to create your unique turntable. There are a total of nine arm bases, AX-1G to AX-9, sold separately, so you can enjoy a wide range of arm selections. ?ConditionEach part has been polished/cleaned. The platter and metal parts are polished to remove dirt and rust as much as possible until they are as clean as possible. Frame/Gunmetal Platter - There are no noticeable scratches on the frame and it is in a glossy condition overall. There are no cracks or cracks on the glass surface inside the frame. - All four insulator suspensions are functioning. There are no missing parts on the blind lid at the top of the insulator. - There are four places on the top of the gunmetal platter where sticker marks remain due to the sheet adhesion. There are some other minor scratches and dullness, but no major damage is found and it has a glossy feel. There is no deterioration or tearing in the suction rubber part. Motor Unit/Pump Unit - There is a slight tilt (floating) on ??the surface sheet on both sides of the button panel of the pump unit. In addition, there are no noticeable scratches on both the pump and motor unit, and they are glossy and in good condition. No cracks or lettering are falling off the dust cover (acrylic plate) on the top plate of the motor unit. Overall, it is in good condition. Considering the age, we judge it to be a good product. ?TestedWe tested it for half a day to a day to check the operation. In preparation for this listing, we have performed a comprehensive maintenance and operation check. We measured the electronic parts, applied spindle oil, cleaned each contact, and adjusted each part. It is in a condition that you can use with confidence. Turntable Unit (RB-1500)Works well- It rotates smoothly without any abnormal noises when rotating. Motor Unit (RY-1500D/RS-1500)Works well- 33/45 rotation switching, speed adjustment rotates normally without any problems. The stable rotation has been confirmed with a stroboscope.- All lights turn on.- There is no problem with the suction knob turning on/off. Pump Unit (RP-1110)Works well- When you connect the tube and press the POWER button, the platter floats and adsorbs the record.- There is no problem with the light turning on.*This item is common to 50/60Hz. All of the above operations are fine and it is in good working order. ?Set Contents?RB-1500 (main unit)?Gunmetal suction platter?RW-1500 (dead weight already installed on the main unit)?RY-1500D (motor unit)?RS-1500 (motor unit base)?RP-1110 (pump unit)?Thread?2 platter detachment fittings?Hexagonal wrench?Stroboscope (MICRO)?Instruction manual (copy/for 1500 series)?Instruction manual (copy/for MK-91FVG)?2 transport screws (The pump unit transport screws will be attached when shipped. Please remove them before use.) ????Message from SellerHi, my name is Danny Chou. I live in Tokyo, Japan. I can speak quite fluent English :)I can source anything you want from Japan! Feel free to contact me anytime! ??Check Your AddressPlease check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed. ??Tracking & PackingPackages: Box or envelope and Bubble wrapWe provide valid Tracking Numbers for all orders.All our international packages will be shipped by FedEx or DHL. ??ReturnWe offer a standard FREE 60 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund. ????Customs DutyImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

????Including & Condition Details: As shown in photos. ????Shipping: FedEx ?ConditionEach part has been polished/cleaned. The dust cover is polished with a special abrasive depending on the level of scratches, and the finish is polished to enhance transparency. The platter and metal parts are polished to remove dirt and rust as much as possible until they are as clean as possible. Dust cover/button, plate part/suction platter ?The cover is clear and beautiful with no noticeable scratches. ?The buttons and plates are also glossy and in good condition. ?The arm base also has minor scratches and no noticeable damage. ?The suction platter is also shiny, and there are no tears or deterioration in the rubber part, but there are a few scratches near the center of the top surface. Cabinet ?There is no major damage and it is shiny and beautiful. ?All four insulators are functioning, and the hinges are not damaged and can be kept open. Air Pump Unit ?There are no noticeable scratches overall. The tubes are soft and have no tears. Overall, it is in beautiful condition. Considering the aging, we judge it to be in good condition. ?We have performed comprehensive maintenance at our company for this sale. We replaced consumable electronic parts (electrolytic capacitors, etc.) and adjusted each part. It is in a condition that you can use with confidence. Turntable It works well, rotates normally, and you can switch between 33 and 45 revolutions/adjust the speed. The rotation stability has been confirmed with the attached stroboscope. ?There is no problem with the start/stop button response. ?There is no problem with the light turning on. *This item is common to 50/60Hz. Air Pump Unit It works well, connect the tube to the turntable and press the SUCTION button to adsorb the record normally. There are no problems with all of the above operations, and it is in good working order. ?Product Details Manufacturer: MICROModel Number: BL-99VFIIAir Pump Unit: RP-99V A-1201 base compatible tonearm ?MICRO MA-505, 505S, 505X, MA-707X ?AUDIO CRAFT AC-300MKII ?SAEC WE-407/23 ?Accessories ?Dust cover ?Rubber belt ?Instruction manual (copy ?For BL-99V.) ?Arm base (MICRO A-1201 Hole diameter: approx. 28mm) ?Disc pad for suction (This is the item that holds the record and suctions) ?Earth wire (approx. 1m) ?Stroboscope (MICRO) ?Transport screw for the Air Pump Unit(The transport screw will be attached when shipping. Please remove the red screw on the bottom of the pump before use.) ????Message from SellerHi, my name is Danny Chou. I live in Tokyo, Japan. I can speak quite fluent English :)I can source anything you want from Japan! Feel free to contact me anytime! ??Check Your AddressPlease check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed. ??Tracking & PackingPackages: Box or envelope and Bubble wrapWe provide valid Tracking Numbers for all orders.All our international packages will be shipped by FedEx or DHL. ??ReturnWe offer a standard FREE 60 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund. ????Customs DutyImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

MICRO SEIKI AX-6G Turntable Long Arm Base From Japan Item Description This unit is in very good condition (please see photos). Shipping Policy We ship the item via DHL with tracking number. Item will arrive approximately one week. Duties and Taxes Policy Import duties, taxes, and other charges which are not included in the item price or shipping charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

DescriptionAll my products are 100% Authentic.Please feel free to contact us if you have any question. Shipping We ship using FedEx, DHL and Japan Post. PaymentWe usually ship within 5?10 business days of receiving cleared payment. International Buyers - Please Note: Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior.

DescriptionAll my products are 100% Authentic.Please feel free to contact us if you have any question. Shipping We ship using FedEx, DHL and Japan Post. PaymentWe usually ship within 5?10 business days of receiving cleared payment. International Buyers - Please Note: Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior.

Micro seiki RX-777AIR Air bearing base, flatter. Please check business term before bidding on my item. ///////////////////////////////NOTE: 1. Dont share personal information or ask me contact outside eBay as well as offer me purchase outside eBay. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

Description of itemThank you for visiting! Our shop is 100% Authentic item. If you have any questions, please be free to ask us.  Have a great shopping on ebay! Paymentwe accept payment only through ebay Managed Payment. Shipping-Japan Post: 5-20 days to arrive -DHL: 5-10 days to arrival *We will ship the item by Japan post or DHL.  If you need expedited shipping, please let me know. I will ask you about extra payment.  Depending on the size and weight after packing the items, The shipping method may change depending on your location. **If you live in a remote area, We might ask extra charge for intenrational shipping. Please contact us for additional charges Shipping is only available to the address registered on ebay. Please note that any address not registered in ebay is not acceptable to ship. Shipping is available from Monday to Friday. **If you live in a remote area, We might ask extra charge for intenrational shipping. Weekends are not available because post office is closed.Term of sale-Return We accept product return within 30days from delivery date but product should be in original position and not in damaged condition,the return shipping charges will be buyer responsibility. -International Buyers - Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

Micro Seiki AX-1 tonearm base MA-505X RMG-212 DA303DescriptionMicro AX-1?Turntable arm base* Compatible arms: MICRO/MA-505X, 505S, 707X ADC/LMF-1, LMF-2 EMT/929 ORTOFON/RMG-212, SMG-212_2 AUDIO CRAFT/AC300C, A DENON/DA303, 305, 307, 309, 401 FR/FR54, 24MK2, 14 SAEC/WE-308N, 308SX, 407/23 GRACE/G-545F, 707, 840FB, 940, 945S, TECHNICS/EPA-101S, L, 99 PIONEER/PA-1000 INFINITY/FORMULA4ShippingI use a Japanese post office & Fedex & DHLStandard Shipping : 5-20 daysExpedited shipping:3-10 daysWe always send the item with a tracking number. So please place an order without any concern on delivery. You can always track the delivery status.Shipping is available from Monday to Friday. Weekends are not available because freight ?(shipping) companies are closed.International Buyers - Please NoteImport duties, taxes and charges are not included in the product price or shipping costs.Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.If the cancellation is by the buyer, we will charge a feeThese charges are the buyers responsibility.If there is a remote charge for your address, we will charge you for shipping separately.Thank you for your understanding.Shipping is only available to the address registered in eBay. If you want us to send another address, please change your address on eBay and then place an order.We do not mark merchandise values below value or mark items as ?gifts? ? Japan, US and International government regulations prohibit such behavior.For used items: We cant guarantee long term operation or discolorationThank you and best regards,

MICRO SEIKI BL-99V FII Turntable RP-99V Air Pump Unit A-1201 Arm Base Set Used DescriptionOperation has been checked. PaymentPlease pay within 3days after your purchase.Shipping We send a product with careful packing. After confirm your payment, Well ship this item within 3-7 business days. (except for Saturday, Sunday and national holiday in JAPAN ) Weekends are not available because FedEx or DHL are closedInternational Buyers - Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

Micro seiki RX-1500 base turntable with gun metal flatter use for 4 tonearm. Due to age item has some small scratches and dirty but bearing function is very good. It can be used with up to 4 tonearms and tonearm. It is very easily to adjust over hang too, so it is highly recommended to one who want to use turntable with many tonearm rotation. Please check business term before bidding on my item. ///////////////////////////////NOTE: 1. Dont share personal information or ask me contact outside eBay as well as offer me purchase outside eBay. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////