ShippingFedEx International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

????Including & Condition Details: As shown in photos. ????Shipping: FedEx MICRO DDL-120 Turntable with Base A-125 and Control Unit A quartz lock direct drive turntable released in the 1970s, the DDL-120 uses a 350mm/4.5kg large platter and control unit. Many tonearms can be set by replacing the base. ?ConditionEach part has been polished/cleaned. Polish the platter and metal parts until they are as clean as possible to remove dirt and rust. Dust cover/button section/platter - The cover has no noticeable scratches and is transparent and clean. - The button part/platter is also in very good condition with no major damage found. - The rubber mat is soft and shows no signs of deterioration or warping. Cabinet - It is clean with no noticeable damage. - The hinge can be opened and closed without any problems and can be kept open. - All 4 rubber parts inside the insulator are elastic and function without problems. Control Unit There are a few scratches but overall it is shiny and in very good condition with no major damage. It is in absolutely beautiful condition. Considering its age, we consider it to be in very good condition. ?To confirm the operation, we perform aging for half a day to one day. For this listing, we are carrying out a total maintenance/operation check at our company. We measured electronic parts, applied spindle oil, cleaned each contact, and adjusted each part. It is in a condition that you can use it with confidence. Turntable/Control UnitWorks well and rotates normally with no problems with ON/OFF and 33/45 rotation switching. The stable rotation has also been confirmed using a stroboscope. - The start/stop button also responds and is locked and stable. - There is no problem with the light turning on. *This item is common for 50/60Hz. There are no problems with all of the above operations, and it is a fully operational product. ?Product Contents Manufacturer: MICRO Model number: DDL-120 External size: W520 x H174 x D420mm Weight: 19.5kg Tonearms compatible with A-125 base ?MICRO SEIKI: MA-505, 505X, 505S ?SAEC: WE-308, WE- 308SX ?fidelity-research: FR-64S, FR-64 ?Technics: EPA-99 ?Accessories ?Dust cover ?Rubber mat (MICRO) ?Ground wire ?Control unit ?Arm base (A-125 hole diameter: approx. 30mm) ?Instruction manual Book (copy) ????Message from SellerHi, my name is Danny Chou. I live in Tokyo, Japan. I can speak quite fluent English :)I can source anything you want from Japan! Feel free to contact me anytime! ??Check Your AddressPlease check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed. ??Tracking & PackingPackages: Box or envelope and Bubble wrapWe provide valid Tracking Numbers for all orders.All our international packages will be shipped by FedEx or DHL. ??ReturnWe offer a standard FREE 60 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund. ????Customs DutyImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

For sale, a newly restored Rek-O-Kut N-33H turntable, made in US 1959. For the person who loves the vintage gear without sacrificing sound quality. Completely gone through. New paint on all upper surfaces, new sturdy rigid plinth made from MDF (painted black.) Motor bearing cleaned and lubed, turntable spindle micro polished. Platter cleaned and polished on lathe (these tend to be tarnished and some of that remains). New, correct rubber motor mounts. Silicon Nitride ball bearing.The tonearm is a Micro Seiki MA-303, all metal, very precise, balances perfectly. Lift lowers slowly. Spindle to headshell distance is correct. Acutex headshell. New RCA connectors on the back. N33H is 33.3 RPM only, belt drive with new belt and felt platter mat. Speed is pretty much spot on, as long as the belt is in correct place, tested with strobe. Heres a brief video playing record for demo: https://youtu.be/oz_bSjBLAjo Turntable has original mid-century modern design by George Nelson design firm. Newly painted gray steel top is not perfect but certainly presentable. There is no hum or rumble. Motor makes a soft spinning sound that I am told is normal. Use well-shielded interconnects to your phono section. Install your own best cartridge, as one is not included.Buyer will receive complete turntable, as shown. Turntable will be well-packed, with tonearm isolated. Shipping within US by FedEx ground. See my seller feedback and thanks for looking.

MICRO SEIKI A-1203 Tonearm Base for fidelity-research FR-64 FR-64S FR-14 Japan Description Condition: Used MICRO SEIKI A-1203 Arm Base for FR-64, FR-64S, FR-14 ConditionOverall there is no major damage and it is shiny.?Product DetailsManufacturer: MICROModel Number: A-1203Hole Diameter: Approximately 30mmCompatible Arms: fidelity-research FR-64, FR-64S, FR-14Compatible Models: BL-91/BL-101/BL-111/RX-2000/SX-111FV/SX-555FVW/SX-777FV. Payment Please pay within 5 days after the auction closed. Shipping About other area, please ask me. When you purchase two or more my items, I can send them together and discount shipping cost. Returns Returns are accepted ONLY if the item was not the item described. International Buyers - Please Note: * Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. * Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. * These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. * We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior.

Seiki AX-7G ARM Base for Micro Record Players SME Parts Audio Equipment Parts Description MICRO Micro Seiki Long Arm This is a two-point mounting arm base for SME. When I bought the RX-5000 Im still using, I bought this as a spare for the SME long arm, but I attached the Saeku to another arm base, and ended up trying this arm base out a few times, but I kept it in storage without using it much. Im selling it because I dont plan on using it in the future. The last photo, photo 8, shows the installation image, and only the arm bases 1 to 7 are listed. Please understand that this is a used item with some small scratches. (See photo) Made of zinc casting, weighs approximately 4.6 kg It is compatible with the RX-5000 series, but please check before making your decision. Payment We accept Managed Payments ONLY. Please pay us within 5-10 days after the auction closed. Shipping I ship it in Expedited shipping(EMS,Fedex,DHL)I attach the tracking number. Please bid it without worrying*We can not use International e-Packet (Japan Post) service for some countries in Central Asia (Kazakhstan, Kyrgystan, Tajikistan etc.) If your shipping address is in these areas, please contact us before bidding. *For stuffed animal products, we may use compression bags for shipping (please understand that some wrinkles may occur). International Buyers - Please Note: * Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.* Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying.* These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.* We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior. ?CautionYou may need a plug adapter for the battery charger according to where you live and use.This chargers plug type is A

????Including & Condition Details: As shown in photos. ????Shipping: FedEx ?ConditionEach part has been polished/cleaned.Depending on the level of scratches, the dust cover is polished with a special abrasive and the finish is polished to enhance transparency. Polished the platter and metal parts until they were as clean as possible to remove dirt and rust. Dust cover/Operation plate section/Platter/Rubber mat?There is no major damage and it is transparent and clean.?The rubber mat is soft and shows no signs of deterioration or warping.?The platter/arm base/operation plate part is also in very good condition.?The lettering on the control plate shows slight fading in two places. Cabinet?There is some light fading and a few scratches/scratches due to age, but overall there are no major scratches and the cabinet is in a glossy condition.?Hinges also remain open without damage.?The internal rubber of the insulator has some deterioration and wear, but it is elastic and is currently functioning without any problems. ?We perform aging for half a day to one day to confirm the operation.For this listing, we have carried out a comprehensive maintenance/operation check at our company. We measured electronic parts, applied spindle oil, cleaned each contact, and adjusted each part. It is in a condition that you can use it with confidence. TurntableWorks well, rotates normally, and can switch between 33 and 45 rotations/adjust speed.?The stable rotation has also been confirmed using a stroboscope.?The pulley operates normally using the ON/OFF knob.?There is no problem with the light turning on.*This item is common for 50/60Hz.There are no problems with all of the above operations, and the product is in very good working order. ?Product ContentsManufacturer: MICROModel number: BL-91Dimensions: Width 532 x Height 175 x Depth 440mm Tonearm compatible with A-1201 base:?MICRO MA-505, 505S, 505X, MA-707X?AUDIO CRAFT AC-300MKII?SAEC WE-407/23 ?Accessories?Dust cover?Rubber mat?Rubber belt?Platter?Arm base (MICRO A1201 hole diameter: approx. 28mm)?Instruction manual (copy)?Transportation screw x 3 (Attach the transportation screw when shipping We will ship it to you. Please remove the 3 red screws under the operation panel before use.) ????Message from SellerHi, my name is Danny Chou. I live in Tokyo, Japan. I can speak quite fluent English :)I can source anything you want from Japan! Feel free to contact me anytime! ??Check Your AddressPlease check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed. ??Tracking & PackingPackages: Box or envelope and Bubble wrapWe provide valid Tracking Numbers for all orders.All our international packages will be shipped by FedEx or DHL. ??ReturnWe offer a standard FREE 60 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund. ????Customs DutyImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

MICRO SEIKI TURNTABLE PARTS ! ONE SPEED CONTROL FRONT PLATE . Condition: VG++ Front Face plate does have a tiny ding on the top left . NoteVg+ Includes factory gasket . VG+ CONDITION . Any defects or damagenoted below . If any . PLEASE SEE PICTURES:

This Micro Seiki AX-2 Armboard is a high-quality part for your DQX 1000 turntable. It is designed for precise and reliable performance, ensuring that your vinyl records will sound their best. The brand name Micro Seiki is known for its excellence in audio equipment, and this armboard is no exception.Crafted with precision, this armboard is made to last. It is compatible with a variety of turntables and cartridges, making it a versatile addition to your audio setup. Whether youre a seasoned audiophile or just starting out, this Micro Seiki AX-2 Armboard is a great choice for your DQX 1000 turntable as well as other Micro Seiki turntables that use a pole mount for the armboard. Has some marring from the base plate of a SME Tonearm that was mounted on it. Sold as is, an estate sale, no returns, refunds or exchanges.

This Micro Seiki AX-1 Armboard is a high-quality part for your DQX 1000 turntable. It is designed for precise and reliable performance, ensuring that your vinyl records will sound their best. The brand name Micro Seiki is known for its excellence in audio equipment, and this armboard is no exception.Crafted with precision, this armboard is made to last. It is compatible with a variety of turntables and cartridges, making it a versatile addition to your audio setup. Whether youre a seasoned audiophile or just starting out, this Micro Seiki AX-1 Armboard is a great choice for your DQX 1000 turntable as well as other Micro Seiki turntables that use a pole mount for the armboard. Has some marring from the base plate of a Micro Seiki 505 Tonearm that was mounted on it as well as the nick shown in the pictures. Sold as is, an estate sale, no returns, refunds or exchanges.

This Micro Seiki Microsorber Turntable Feet set is a great addition to your record player setup. It is designed to provide a secure and stable base for your turntable, ensuring optimal sound quality. The feet are compatible with universal brands and are made from high-quality materials, making them durable and long-lasting. Whether youre a music enthusiast or a professional audiophile, this turntable feet is a must-have accessory for your record player. It is easy to install and use, and will provide a significant improvement to your listening experience. Get your hands on this Micro Seiki Microsorber Turntable Feet today and take your record listening to the next level! Some marring from previous arm boards that were mounted to it. Sold as is for an estate, no refunds, exchanges or returns.

YOU ARE BIDDING ON MICRO SEIKI XP 280 / 282 TONEARM ALUMINIUM ARM BASE THIS ITEM USED CONDITION ALL SALES ARE FINAL SO PLEASE ASK ALL QUESTIONS BEFORE BIDDING. THANK YOU.

MICRO SEIKI AX-3G Arm Base From Japan Item Description This unit is in excellent condition (please see photos). Shipping Policy We ship the item via DHL with tracking number. Item will arrive approximately one week. Duties and Taxes Policy Import duties, taxes, and other charges which are not included in the item price or shipping charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

Micro Seiki Genuine Parts Tone Arn Base for MR-411 Weight 41g DescriptionAbout This Items It is a used and made in Japan.Center hole diameter for Arm Base mounting approx.16mm.Height approx 30mm.The available tonearm mount for this product is approx.16mm.This arm base is an original parts.AppearanceThis Screw part has some scratches.ConditionUsed item.Included Item screw.ShippingWe always send the item with a tracking number. So please place an order without any concern on delivery. You can always track the delivery status.Shipping is only available to the address registered in eBay. If you want us to send another address, please change your address on eBay and then place an order.Shipping is available from Monday to Friday. Weekends are not available because freight (shipping) companies are closed.We do not mark merchandise values below value or mark items as ?gifts? ? Japan, US and International government regulations prohibit such behavior.If your address is in the remote areas defined by the freight (shipping) company, please pay the additional shipping fees with PayPal. SHIPPING COST?SHIPPING COST USA ASIA SHIP ORDER VIA JAPAN POST SMALL PACKET ( WITH TRACKING NUMBER ) ? AUSTRARIA SHIP ORDER VIA JAPAN POST (WITH TRACKING NUMBER ) EUROPE SHIP ORDER VIA JAPAN POST SMALL PACKET( WITH TRACKING NUMBER ) ASIA USA$11 ( JAPAN POST SMALL PACKET) $5.99 each for an additional LP,CANADA AUSTRARIA$11 ( JAPAN POST SMALL PACKET) $6.99 each for an additional LP,EUROPE$11 ( JAPAN POST SMALL PACKET)About Importers ObligationImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

Being sold for parts as-is. Phono jack is cracked. Please see photos as they are part of the condition description. Feel free to ask any questions you may have. Sold AS-IS. Thanks for looking! If for some reason you are not satisfied with your purchase please contact me before leaving negative feedback. I will gladly resolve the issue in the best way I can.

MICRO SEIKI BL-91 Turntable w/ A1202 Arm Base Dust Cover Excellent Japan Description Condition: Used MICRO SEIKI BL-91 Turntable with Arm Base A1202/rubber belt/transport screws ..etc.?ConditionEach part has been polished/cleaned.The dust cover is polished with a special abrasive depending on the level of scratches, and the finish is polished to enhance transparency. The platter and metal parts are polished to remove dirt and rust as much as possible.Dust cover/operation plate part/platter/rubber mat?The cover is clean and transparent with no major scratches.?The platter/arm base/operation plate parts are also in good condition.?The rubber mat is also soft and has no deterioration or warping.Cabinet- There are a few dotted linear marks on the top surface, but overall there is no major damage and it is shiny.- The hinges remain open without any damage.- The rubber inside the insulator is also elastic and functions without any problems.Overall it is in good condition. Considering the age, we judge it to be a good product.We have carried out a total maintenance/operation check in preparation for this listing. We measured the electronic parts/lubricated the spindle with oil/cleaned each contact and adjusted each part. It is in a condition that you can use with confidence.TurntableWorks well, rotates normally, and can be switched between 33 and 45 rpm/adjusted. The stable rotation has been confirmed with a stroboscope.- The pulley operates normally with the ON/OFF knob.- There is no problem with the light turning on.*This item is common to 50/60Hz.There are no problems with the above operations and it works well.?Product DetailsManufacturer: MICROModel Number: BL-91Dimensions : Width 532 x Height 175 x Depth 440mmA-1202 Arm Base compatible Tonearm:?SAEC WE-308, WE-308SX, WE-317?Accessories?Dust cover?Rubber mat (MICRO DISK-SE 22M)?Rubber belt?Stroboscope (MICRO MST-105)?Platter?Arm base (MICRO A1202 hole diameter: approx. 28mm)?Instruction manual (original)?Transport screws x 3 (The transport screws will be attached when shipped. Please remove the three red screws under the operation panel before use.) Payment Please pay within 5 days after the auction closed. Shipping About other area, please ask me. When you purchase two or more my items, I can send them together and discount shipping cost. Returns Returns are accepted ONLY if the item was not the item described. International Buyers - Please Note: * Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. * Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. * These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. * We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior.

MICRO SEIKI AX-4G Arm Base From Japan Item Description This unit is in excellent condition (please see photos). Shipping Policy We ship the item via DHL with tracking number. Item will arrive approximately one week. Duties and Taxes Policy Import duties, taxes, and other charges which are not included in the item price or shipping charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

For your consideration is Micro Seiki MA-505 Tonearm Base. What you see in the picture is what you will get.

MICRO SEIKI A-1201 Arm Board Base for Turntable Tonearm Will need a deep clean Sold as seen

MICRO SEIKI A-1201 Arm Board Base for Turntable Tonearm Will need a deep clean Sold as seen

MICRO SEIKI AX-7G Tonearm Base Our price is 100% negotiable! Please make an offer and we will give you the best price! Payment PayPal ONLY. Please pay within 5 days after auction is finished. Shipping We ONLY ship to buyers Paypal registered address. ReturnsItems that are faulty beyond the description given on our auction site should be returned for a full refund.Please contact us by e-mail if items delivered are faulty. However, please send the item back to us. About usOur product is 100% authentic! We dispatch items from Japan. We provide our goods and services based on our motto “Your complete satisfaction is our ultimate goal”. Therefore, please rest assured and make your bid with ease. Please Note International Buyers Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer responsibility. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as gifts- US and International government regulations prohibit such behavior.

MICRO SEIKI A-1201 Arm Board Base for Turntable Tonearm Will need a deep clean Sold as seen

????Including & Condition Details: As shown in photos. MICRO BL-101 Turntable Arm base A1205/Rubber belt included A turntable was released in 1982. This is a belt drive type short arm exclusive model, and the arm base is compatible with the MICRO A-1200 series. Produces a lingering sound unique to belt drives. ?Condition Each part has been polished/cleaned. Depending on the level of scratches, the dust cover is polished with a special abrasive and the finish is polished to enhance transparency. Polish the platter and metal parts until they are as clean as possible to remove dirt and rust. Dust cover/lever, plate section/platter/rubber mat - The cover has no noticeable scratches and is transparent and clean. ?Buttons and panels are also glossy. ?The platter is also glossy with only a few dull spots remaining. ?The rubber mat is also in a soft condition with no deterioration or warping. ?There are some scratches on the arm base, but no major damage is visible. Cabinet - Although it will not be visible after the outer platter is set, ?there are some faint linear marks on the inner platter. ?Other than that, there is no noticeable damage and it is shiny. ?Hinges also remain open without damage. -The rubber inside the insulator is elastic and functions without problems. It is in good overall condition. Considering its age, we judge it to be a good product. We perform aging for half a day to one day to confirm the operation. For this listing, we have carried out a comprehensive maintenance/operation check at our company. We measured electronic parts, applied spindle oil, cleaned each contact, and adjusted each part. It is in a condition that you can use it with confidence. Turntable Works well, rotates normally, and can switch between 33 and 45 rotations/adjust speed. The stable rotation has also been confirmed using a stroboscope. ?There is no problem with strobe lighting. ?Product contents Manufacturer: MICRO Model number: BL-101 Dimensions: Width 532x Height 215x Depth 420mm Weight: 18kg Tonearm compatible with the A-1205 base ?MICRO MA-505XII, 505SII, 505MKIII, 808X ?AUDIO CRAFT AC-3000MC ?Accessories ?Dust cover ?Platter fixing screw x 3 ?Rubber mat ?Rubber belt ?Instruction manual (copy) ?Arm base (MICRO A1205 hole Diameter: approx. 37mm) ?Ground wire ????Shipping: FedEx ????Message from SellerHi, my name is Danny Chou. I live in Tokyo, Japan. I can speak quite fluent English :)I can source anything you want from Japan! Feel free to contact me anytime! ??Check Your AddressPlease check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed. ??Tracking & PackingPackages: Box or envelope and Bubble wrapWe provide valid Tracking Numbers for all orders.All our international packages will be shipped by FedEx or DHL. ??ReturnWe offer a standard FREE 60 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund. ????Customs DutyImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

MICRO SEIKI AX-1 Tonearm Arm Base Tested Genuine Excellent from Japan Description Condition: Used There are some dullness and scratches,The condition is glossy with no major flaws. Payment Please pay within 5 days after the auction closed. Shipping About other area, please ask me. When you purchase two or more my items, I can send them together and discount shipping cost. Returns Returns are accepted ONLY if the item was not the item described. International Buyers - Please Note: * Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. * Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. * These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. * We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior.

Description ?Total Condition Rank : Excellent *Please check the rank table below ? Include : Please confirm the accessories with photos. All the accessories appearing in the photos are attached. *If you want to know more details of condition, please feel free to contact me.I can send more photos if you want. ConditionRankDetails99%Like NewA new, unused item with absolutely no sign of wear, but pre-owned. 97-98%Top MintAlmost no signs of use.95-96%MintMinimal sings of use.93-94%Near MintSome scratches and dirt.91-92%ExcellentMany scratches and dirt. No problem for use.86-90%GoodMany big scratches and dirt. No problem for use.80-85%For PartsAs-is. It does not work normally. Use for parts. Payment We accept PayPal payment only. Please make payment after we sent an invoice. Please pay within 3 days of winning the auction. **Please read our Return Policy before a successful bid. Please purchase our item only if you accept our Return Policy. If you have any questions, please email me before purchase. Shipping Sipping is Standard Shipping. I ship the item to your Paypal registered address via standard shipping with tracking number. Item(s) will be shipped in 10 business day after your purchase. I confirmed a receipt of your payment.(excluding weekends & Japanese holidays) Depending on the country, I will charge tariffs on buyers before shipping. I will charge tariffs with Paypal. If you wish combined shipping with other items, please let us know. We will calculate the total shipping cost and will inform you. About Us Thank you for visiting my store.My store is in Hokkaido, Japan. All accessories are included in the description that we have posted in list. Please refer to the description carefully. Cause the time difference we might not be able to response your question in real time, but we will reply your questions as soon as possible. We look forward to having a dealing with you! International Buyers - Please Note: Import duties, taxes and charges are not included in the item price or shipping charges. Please check with Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse for additional shipping charges. Please use English, Japanese when you contact us about a complaint of the item.