YOU ARE BIDDING ON MICRO SEIKI XP 280 / 282 TONEARM ALUMINIUM ARM BASE THIS ITEM USED CONDITION ALL SALES ARE FINAL SO PLEASE ASK ALL QUESTIONS BEFORE BIDDING. THANK YOU.

MICRO SEIKI AX-3G Arm Base From Japan Item Description This unit is in excellent condition (please see photos). Shipping Policy We ship the item via DHL with tracking number. Item will arrive approximately one week. Duties and Taxes Policy Import duties, taxes, and other charges which are not included in the item price or shipping charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

Micro Seiki Genuine Parts Tone Arn Base for MR-411 Weight 41g DescriptionAbout This Items It is a used and made in Japan.Center hole diameter for Arm Base mounting approx.16mm.Height approx 30mm.The available tonearm mount for this product is approx.16mm.This arm base is an original parts.AppearanceThis Screw part has some scratches.ConditionUsed item.Included Item screw.ShippingWe always send the item with a tracking number. So please place an order without any concern on delivery. You can always track the delivery status.Shipping is only available to the address registered in eBay. If you want us to send another address, please change your address on eBay and then place an order.Shipping is available from Monday to Friday. Weekends are not available because freight (shipping) companies are closed.We do not mark merchandise values below value or mark items as ?gifts? ? Japan, US and International government regulations prohibit such behavior.If your address is in the remote areas defined by the freight (shipping) company, please pay the additional shipping fees with PayPal. SHIPPING COST?SHIPPING COST USA ASIA SHIP ORDER VIA JAPAN POST SMALL PACKET ( WITH TRACKING NUMBER ) ? AUSTRARIA SHIP ORDER VIA JAPAN POST (WITH TRACKING NUMBER ) EUROPE SHIP ORDER VIA JAPAN POST SMALL PACKET( WITH TRACKING NUMBER ) ASIA USA$11 ( JAPAN POST SMALL PACKET) $5.99 each for an additional LP,CANADA AUSTRARIA$11 ( JAPAN POST SMALL PACKET) $6.99 each for an additional LP,EUROPE$11 ( JAPAN POST SMALL PACKET)About Importers ObligationImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

Being sold for parts as-is. Phono jack is cracked. Please see photos as they are part of the condition description. Feel free to ask any questions you may have. Sold AS-IS. Thanks for looking! If for some reason you are not satisfied with your purchase please contact me before leaving negative feedback. I will gladly resolve the issue in the best way I can.

MICRO SEIKI BL-91 Turntable w/ A1202 Arm Base Dust Cover Excellent Japan Description Condition: Used MICRO SEIKI BL-91 Turntable with Arm Base A1202/rubber belt/transport screws ..etc.?ConditionEach part has been polished/cleaned.The dust cover is polished with a special abrasive depending on the level of scratches, and the finish is polished to enhance transparency. The platter and metal parts are polished to remove dirt and rust as much as possible.Dust cover/operation plate part/platter/rubber mat?The cover is clean and transparent with no major scratches.?The platter/arm base/operation plate parts are also in good condition.?The rubber mat is also soft and has no deterioration or warping.Cabinet- There are a few dotted linear marks on the top surface, but overall there is no major damage and it is shiny.- The hinges remain open without any damage.- The rubber inside the insulator is also elastic and functions without any problems.Overall it is in good condition. Considering the age, we judge it to be a good product.We have carried out a total maintenance/operation check in preparation for this listing. We measured the electronic parts/lubricated the spindle with oil/cleaned each contact and adjusted each part. It is in a condition that you can use with confidence.TurntableWorks well, rotates normally, and can be switched between 33 and 45 rpm/adjusted. The stable rotation has been confirmed with a stroboscope.- The pulley operates normally with the ON/OFF knob.- There is no problem with the light turning on.*This item is common to 50/60Hz.There are no problems with the above operations and it works well.?Product DetailsManufacturer: MICROModel Number: BL-91Dimensions : Width 532 x Height 175 x Depth 440mmA-1202 Arm Base compatible Tonearm:?SAEC WE-308, WE-308SX, WE-317?Accessories?Dust cover?Rubber mat (MICRO DISK-SE 22M)?Rubber belt?Stroboscope (MICRO MST-105)?Platter?Arm base (MICRO A1202 hole diameter: approx. 28mm)?Instruction manual (original)?Transport screws x 3 (The transport screws will be attached when shipped. Please remove the three red screws under the operation panel before use.) Payment Please pay within 5 days after the auction closed. Shipping About other area, please ask me. When you purchase two or more my items, I can send them together and discount shipping cost. Returns Returns are accepted ONLY if the item was not the item described. International Buyers - Please Note: * Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. * Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. * These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. * We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior.

MICRO SEIKI AX-4G Arm Base From Japan Item Description This unit is in excellent condition (please see photos). Shipping Policy We ship the item via DHL with tracking number. Item will arrive approximately one week. Duties and Taxes Policy Import duties, taxes, and other charges which are not included in the item price or shipping charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

For your consideration is Micro Seiki MA-505 Tonearm Base. What you see in the picture is what you will get.

MICRO SEIKI A-1201 Arm Board Base for Turntable Tonearm Will need a deep clean Sold as seen

MICRO SEIKI A-1201 Arm Board Base for Turntable Tonearm Will need a deep clean Sold as seen

MICRO SEIKI AX-7G Tonearm Base Our price is 100% negotiable! Please make an offer and we will give you the best price! Payment PayPal ONLY. Please pay within 5 days after auction is finished. Shipping We ONLY ship to buyers Paypal registered address. ReturnsItems that are faulty beyond the description given on our auction site should be returned for a full refund.Please contact us by e-mail if items delivered are faulty. However, please send the item back to us. About usOur product is 100% authentic! We dispatch items from Japan. We provide our goods and services based on our motto “Your complete satisfaction is our ultimate goal”. Therefore, please rest assured and make your bid with ease. Please Note International Buyers Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer responsibility. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as gifts- US and International government regulations prohibit such behavior.

MICRO SEIKI A-1201 Arm Board Base for Turntable Tonearm Will need a deep clean Sold as seen

????Including & Condition Details: As shown in photos. MICRO BL-101 Turntable Arm base A1205/Rubber belt included A turntable was released in 1982. This is a belt drive type short arm exclusive model, and the arm base is compatible with the MICRO A-1200 series. Produces a lingering sound unique to belt drives. ?Condition Each part has been polished/cleaned. Depending on the level of scratches, the dust cover is polished with a special abrasive and the finish is polished to enhance transparency. Polish the platter and metal parts until they are as clean as possible to remove dirt and rust. Dust cover/lever, plate section/platter/rubber mat - The cover has no noticeable scratches and is transparent and clean. ?Buttons and panels are also glossy. ?The platter is also glossy with only a few dull spots remaining. ?The rubber mat is also in a soft condition with no deterioration or warping. ?There are some scratches on the arm base, but no major damage is visible. Cabinet - Although it will not be visible after the outer platter is set, ?there are some faint linear marks on the inner platter. ?Other than that, there is no noticeable damage and it is shiny. ?Hinges also remain open without damage. -The rubber inside the insulator is elastic and functions without problems. It is in good overall condition. Considering its age, we judge it to be a good product. We perform aging for half a day to one day to confirm the operation. For this listing, we have carried out a comprehensive maintenance/operation check at our company. We measured electronic parts, applied spindle oil, cleaned each contact, and adjusted each part. It is in a condition that you can use it with confidence. Turntable Works well, rotates normally, and can switch between 33 and 45 rotations/adjust speed. The stable rotation has also been confirmed using a stroboscope. ?There is no problem with strobe lighting. ?Product contents Manufacturer: MICRO Model number: BL-101 Dimensions: Width 532x Height 215x Depth 420mm Weight: 18kg Tonearm compatible with the A-1205 base ?MICRO MA-505XII, 505SII, 505MKIII, 808X ?AUDIO CRAFT AC-3000MC ?Accessories ?Dust cover ?Platter fixing screw x 3 ?Rubber mat ?Rubber belt ?Instruction manual (copy) ?Arm base (MICRO A1205 hole Diameter: approx. 37mm) ?Ground wire ????Shipping: FedEx ????Message from SellerHi, my name is Danny Chou. I live in Tokyo, Japan. I can speak quite fluent English :)I can source anything you want from Japan! Feel free to contact me anytime! ??Check Your AddressPlease check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed. ??Tracking & PackingPackages: Box or envelope and Bubble wrapWe provide valid Tracking Numbers for all orders.All our international packages will be shipped by FedEx or DHL. ??ReturnWe offer a standard FREE 60 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund. ????Customs DutyImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

MICRO SEIKI AX-1 Tonearm Arm Base Tested Genuine Excellent from Japan Description Condition: Used There are some dullness and scratches,The condition is glossy with no major flaws. Payment Please pay within 5 days after the auction closed. Shipping About other area, please ask me. When you purchase two or more my items, I can send them together and discount shipping cost. Returns Returns are accepted ONLY if the item was not the item described. International Buyers - Please Note: * Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. * Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. * These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. * We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior.

Description ?Total Condition Rank : Excellent *Please check the rank table below ? Include : Please confirm the accessories with photos. All the accessories appearing in the photos are attached. *If you want to know more details of condition, please feel free to contact me.I can send more photos if you want. ConditionRankDetails99%Like NewA new, unused item with absolutely no sign of wear, but pre-owned. 97-98%Top MintAlmost no signs of use.95-96%MintMinimal sings of use.93-94%Near MintSome scratches and dirt.91-92%ExcellentMany scratches and dirt. No problem for use.86-90%GoodMany big scratches and dirt. No problem for use.80-85%For PartsAs-is. It does not work normally. Use for parts. Payment We accept PayPal payment only. Please make payment after we sent an invoice. Please pay within 3 days of winning the auction. **Please read our Return Policy before a successful bid. Please purchase our item only if you accept our Return Policy. If you have any questions, please email me before purchase. Shipping Sipping is Standard Shipping. I ship the item to your Paypal registered address via standard shipping with tracking number. Item(s) will be shipped in 10 business day after your purchase. I confirmed a receipt of your payment.(excluding weekends & Japanese holidays) Depending on the country, I will charge tariffs on buyers before shipping. I will charge tariffs with Paypal. If you wish combined shipping with other items, please let us know. We will calculate the total shipping cost and will inform you. About Us Thank you for visiting my store.My store is in Hokkaido, Japan. All accessories are included in the description that we have posted in list. Please refer to the description carefully. Cause the time difference we might not be able to response your question in real time, but we will reply your questions as soon as possible. We look forward to having a dealing with you! International Buyers - Please Note: Import duties, taxes and charges are not included in the item price or shipping charges. Please check with Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse for additional shipping charges. Please use English, Japanese when you contact us about a complaint of the item.

????Including & Condition Details: As shown in photos. MICRO BL-91 turntable/arm base A1206/rubber belt/transportation screws/original box, etc. ?ConditionEach part has been polished/cleaned. Depending on the level of scratches, the dust cover is polished with a special abrasive and the finish is polished to enhance transparency. Polish the platter and metal parts until they are as clean as possible to remove dirt and rust. Dust cover/Operation plate section/Platter/Rubber mat - There are some scratches/scratches on the cover, but there is no major damage and it is clean and transparent. -The rubber mat is soft and shows no signs of deterioration or warping. ?The platter/arm base/operation plate part is also in very good condition. Cabinet - There are some circular marks on the platter installation surface, but overall there is no major damage and the cabinet is glossy and in very good condition. ?Hinges also remain open without damage. - The rubber inside the insulator has some wear, but it is elastic and is currently functioning without any problems. It is in absolutely beautiful condition. Considering its age, we consider it to be in very good condition. ?We perform aging for half a day to one day to confirm the operation. For this listing, we have carried out a comprehensive maintenance/operation check at our company. We measured electronic parts, applied spindle oil, cleaned each contact, and adjusted each part. It is in a condition that you can use it with confidence. TurntableWorks well, rotates normally, and can switch between 33 and 45 rotations/adjust speed. The stable rotation has also been confirmed using a stroboscope. ?The pulley operates normally using the ON/OFF knob. - There is no problem with the light turning on. *This item is common for 50/60Hz. There are no problems with all of the above operations, and the product is in very good working order. ?Product contents Manufacturer: MICRO Model number: BL-91 Dimensions: Width 532 x Height 175 x Depth 440mm ?Accessories ?Dust cover ?rubber mat ?rubber belt ?platter ?arm base (for MICRO A1206 SME short arm) ?instruction manual ( Copy) ?Stroboscope (MICRO) ?Original box x 2 ?Transportation screws x 3 ?When shipped, the transportation screws will be attached. Please remove the 3 red screws under the operation panel before use. ????Shipping: FedEx ????Message from SellerHi, my name is Danny Chou. I live in Tokyo, Japan. I can speak quite fluent English :)I can source anything you want from Japan! Feel free to contact me anytime! ??Check Your AddressPlease check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed. ??Tracking & PackingPackages: Box or envelope and Bubble wrapWe provide valid Tracking Numbers for all orders.All our international packages will be shipped by FedEx or DHL. ??ReturnWe offer a standard FREE 60 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund. ????Customs DutyImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

MICRO SEIKI A-1201 Arm Board Base for Turntable Tonearm Will need a deep clean Sold as seen

MICRO SEIKI A-1201 Arm Board Base for Turntable Tonearm Will need a deep clean Sold as seen

????Including & Condition Details: As shown in photos. ????Shipping: FedEx ????Message from SellerHi, my name is Danny Chou. I live in Tokyo, Japan. I can speak quite fluent English :)I can source anything you want from Japan! Feel free to contact me anytime! ??Check Your AddressPlease check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed. ??Tracking & PackingPackages: Box or envelope and Bubble wrapWe provide valid Tracking Numbers for all orders.All our international packages will be shipped by FedEx or DHL. ??ReturnWe offer a standard FREE 60 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund. ????Customs DutyImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

MICRO SEIKI AX-1 Tonearm Base Tonearm mount hole diamenter: Ø 28 and 3 slits for M3x30 placed in 120° mount pattern. Micro Seiki model compatibility: Micro Seiki DDX-1000, DQX-1000, DDX-1500, RB-1500, RX-1500, RX-3000, RX-5000, SX-1500, SX-5000 Air, SX-5000 II or SX-8000 II. Also fits TechDAS Airforce V, TechDAS Airforce 3 and TechDAS Airforce 3 premium Tonearm compatibility: Micro Seiki MA-202, 303, 505, 505X, 505S, 701, 707X, CF-1, CF-2ADC LMF-1, LMF-2Audio Craft AC-300C, 300A , 300MKIIAudio Technica AT-1005 II,Denon DA-303, 305, 307, 309EMT 929FR FR-14, FR-24 MKII, FR-54Grace G-545F, 707, 840F, 840FB, 940, 945Silver, 709FPioneer PA-1000SAEC WE-308N, 308SX, 407/23Technics EPA-99, 121S, 101S, 121L, 101LOrtofon RMG-212, RS-212, Our price is 100% negotiable! Please make an offer and we will give you the best price! Payment PayPal ONLY. Please pay within 5 days after auction is finished. Shipping We ONLY ship to buyers Paypal registered address. ReturnsItems that are faulty beyond the description given on our auction site should be returned for a full refund.Please contact us by e-mail if items delivered are faulty. However, please send the item back to us. About usOur product is 100% authentic! We dispatch items from Japan. We provide our goods and services based on our motto “Your complete satisfaction is our ultimate goal”. Therefore, please rest assured and make your bid with ease. Please Note International Buyers Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer responsibility. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as gifts- US and International government regulations prohibit such behavior.

????Including & Condition Details: As shown in photos. Please check the photos for details. ????Shipping: FedEx MICRO DDL-120 Turntable Includes Control Unit, A-125 Base ..etc.A quartz lock direct drive turntable released in the 1970s, the DDL-120 uses a 350mm/4.5kg large platter and control unit. Many tonearms can be set by replacing the base. ?ConditionEach part has been polished/cleaned. Depending on the level of scratches, the dust cover is polished with a special abrasive and the finish is polished to enhance transparency. Polished the arm, platter, and metal parts until they are as clean as possible to remove dirt and rust. Dust cover/button section/platter - The cover has no noticeable scratches and is transparent and clean. - No major damage is found on the button/platter. -The rubber mat is soft and shows no signs of deterioration or warping. Cabinet - It is clean with no major damage found. ?The hinge can be opened and closed without any problems and can be kept open. ?The rubber inside the insulator is elastic at all four points and functions without any problems. Control Unit - Overall shiny and in very good condition with no noticeable damage. It is in absolutely beautiful condition. Considering its age, we consider it to be in very good condition. ?We perform aging for half a day to one day to confirm the operation. For this listing, we have carried out a comprehensive maintenance/operation check at our company. We measured electronic parts, applied spindle oil, cleaned each contact, and adjusted each part. It is in a condition that you can use it with confidence. Turntable/Control unitWorks well and rotates normally with no problems with ON/OFF and 33/45 rotation switching. The stable rotation has also been confirmed using a stroboscope. ?The start/stop button also responds and is locked and stable. - There is no problem with the light turning on. *This item is common for 50/60Hz. There are no problems with all of the above operations, and it is a fully operational product. ?Product Contents Manufacturer: MICRO Model number: DDL-120 External size: W520 x H174 x D420mm Weight: 19.5kg Compatible Tonearms (with A-125 base) ?MICRO MA-505, 505X, 505S ?SAEC WE-308, WE- 308SX ?fidelity-research FR-64S, FR-64 ?Technics EPA-99 ?Accessories ?Dust cover ?Rubber mat (MICRO) ?Ground wire ?Control unit ?Arm base (A-125 hole diameter: approx. 30mm) ?Instruction manual Book (copy) ????Message from SellerHi, my name is Danny Chou. I live in Tokyo, Japan. I can speak quite fluent English :)I can source anything you want from Japan! Feel free to contact me anytime! ??Check Your AddressPlease check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed. ??Tracking & PackingPackages: Box or envelope and Bubble wrapWe provide valid Tracking Numbers for all orders.All our international packages will be shipped by FedEx or DHL. ??ReturnWe offer a standard FREE 60 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund. ????Customs DutyImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

MICRO SEIKI A-1201 Arm Board Base for Turntable Tonearm Will need a deep clean Sold as seen

MICRO SEIKI A-1201 Arm Board Base for Turntable Tonearm Will need a deep clean Sold as seen

DescriptionUsed Condition PolicyPaymentPlease pay within 5 days after auction is finished.About UsAll of our goods are genuine articles. Moreover, we sell honestly. Please contact me, if you have your question.International Buyers - Please Note:Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

MICRO SEIKI BL-99V DescriptionMicro Seiki introduced the BL-99V belt drive player around 1983.This player has a heavy turntable and record suction function.BL stands for belt drive and V for vacuum.It is no exaggeration to say that Micro Seikis ultra-precision processing technology is the pride of Japan.Manufacturer: MICRO, Turntable model number: BL-99V, Dimensions W530 x H200 x D420 (mm), Weight: 17.45 kgPump unit model number: RP-99V, dimensions: W175 x H120 x D295 (mm), weight: 3 kgA-1201 base compatible tone arm: MICRO MA-505, 505S, 505X, MA-707X, AUDIO CRAFT AC-300MKII, SAEC WE-407/23 Operation checkWe have performed total maintenance and operation checks for this exhibit.We have measured electronic parts, lubricated spindle oil, cleaned each contact point, and adjusted each part.It is in good condition for safe use.The turntable rotates normally and can be switched between 33 and 45 rpm and the speed can be adjusted.The rotational stability has been confirmed with the included stroboscope.The start/stop button response is also fine.No problem with start/stop button response and light illumination.Connect the tube to the turntable.When the tube is connected to the turntable and the SUCTION button is pressed, the record disc is adsorbed normally.All of the above are in good working order.If you find any defects after arrival, please feel free to contact us for a free return. Please contact us for a free return policy (limited to 30 days after delivery). AccessoryDust coverRubber beltInstruction Manual (original)Arm base (MICRO A-1201, hole diameter: approx. 28mm)Disc pad for adsorption (This item is used to hold the record disc and adsorb it.)Ground wire (approx. 1m)Stroboscope (MICRO)Transport screws for pump unitThe pump unit will be shipped with the transport screws attached.Please remove the red screw on the bottom of the pump before use. PackagingWhen exporting overseas, we will ship the product in reinforced cardboard boxes to prevent damage during transportation. If the product comes with its original box, we will ship it with the original box protected. PrecautionsWhen using the product, please check the voltage supported by the product and the voltage in your area carefully. If the voltage is different from the product specifications, not only will the product not function properly, it may also damage the equipment. About Handling TimeShips within 5 business day.Please note that Saturdays, Sundays, and holidays do not count as business days. About Shipping PolicyWe ship via FedEx, DHL or Japan Post. International Buyers - Please Note:Duties, taxes, and fees are not included in the product price or shipping cost. You are responsible for paying any duties, taxes, or fees that may be incurred when importing products into your country. We also recommend that you check with your customs office in advance of your purchase to determine how much these additional costs will be.