The CS-1 and CS-2 High Fidelity Speakers have been specially designed to provide unusually high quality sound when an installation requires a smaller speaker. These sonically-adjustable speakers provide superior sound 1.) on a shelf or table-top as part of a stereo system in a smaller room and 2.) for a sophisticated desktop computer work station where quality audio is required. The CS-1, with its 4-inch lower-midrange/bass driver, provides the best sonic solution when a separate subwoofer system can be employed. The CS-2 with its 5 1/4” lower-midrange / bass driver has a better frequency balance if it is necessary that it be used alone and a separate subwoofer is not practical. Both CS-1 and CS-2 models attain their unusually high sensitivity and special performance by using a built-in adjustable active crossover and a booster power amplifier on the midrange-bass driver. There is a completely passive crossover on the large two-inch upper-midrange / high frequency dome. The active crossover / amplifier enables the user to continually adjust both the volume of the lower midrange-bass cone driver and its crossover frequency relative to the passive dome. It adjusts those lower-midrange frequencies which are critical to a satisfactory balance in the difficult tabletop and shelf environment. The speaker adjusts for: 1.) The listeners distance to the speaker. 2.) The immediate physical reflective environment in which it is placed. 3.) The sonic character of the components connected to it. 4.) To suit the users individual taste and hearing. This flexibility means that the speakers can assimilate much more quickly and successfully in a much wider variety of installations than other speakers. This flexibility is not meant to substitute for standard bass and treble controls found on preamplifiers, integrated amplifiers and receivers. Those controls are meant to compensate for frequencies at the more extreme high and low portions of the spectrum. They will likely be necessary to compensate for widely varying program material particularly from the internet, for room acoustics and for individual taste. Another significant advantage is that the internal booster amplifier increases the gain of the lower-midrange / bass driver to match that of the much higher sensitivity aluminum dome thereby increasing the overall sensitivity of the speaker system to around 90 db, 1 watt, 1 meter. That sensitivity figure includes the bass frequencies around 70 cycles (for the CS-1 with the 4-inch driver) and 50 cycles (for the CS-2 with the 5 1/4-inch driver) accounting for the unusually strong bass performance of these speakers. It also makes it possible to use lower-wattage amplifiers, including superior small tube amplifiers, with such a small speaker.The CS-2 Features: * The cabinets height and angled front panel correctly places the speaker drivers at a seated listeners ear level when placed on a desk or table during computer use. * 5-inch lower midrange-bass driver with aluminum cone and long-travel suspension. * 2-inch upper midrange-tweeter driver with aluminum dome provides extreme clarity. The aluminum composition of both diaphragms is the reason the speakers sound character remains consistent from bass to treble. * Continuously variable volume level and frequency crossover points affecting only the bass-lower midrange relative to the upper-midrange / tweeter. * 8 ohms. Sensitivity: 90 db 1 watt @ 1 meter. 25-watt internal woofer-lower midrange power amplifier. * Passive crossover with no resistors or attenuation to the midrange-tweeter dome.* RCA line level input for use with an amplifiers preamplifier output for the lower midrange-bass driver plus a separate speaker-level upper midrange-tweeter input for hookup flexibility. * High durability black textured finish. * Acoustically-transparent, thin fabric curved grill. No sound-coloring grill frame used. * Size: 17H x 6 7/8 x 9D * Weight: 14 lbs per speaker. * 3-Year Warranty. * For 115-120 Volts AC, 60 Cycles. * Made in U.S.A. using U.S. and Global parts. ABOUT THIS Ebay OFFER: This product is available only from Wright Audio. Please note that a signature will be required at delivery. RETURNS:We are so sure you will love this component that it is sold with a 30-day trial period from the date of receipt with a money-back guarantee, less shipping costs. The unit must be returned undamaged and complete. There is no restocking fee. Please notify us that you intend to return the item so we can issue a Return Authorization Number. The contents of this listing (c) 2023 Wright Audio.

The CS-1 and CS-2 High Fidelity Speakers have been specially designed to provide unusually high quality sound when an installation requires a smaller speaker. These sonically-adjustable speakers provide superior sound 1.) on a shelf or table-top as part of a stereo system in a smaller room and 2.) for a sophisticated desktop computer work station where quality audio is required. The CS-1, with its 4-inch lower-midrange/bass driver, provides the best sonic solution when a separate subwoofer system can be employed. The CS-2 with its 5 1/4” lower-midrange / bass driver has a better frequency balance if it is necessary that it be used alone and a separate subwoofer is not practical. Both CS-1 and CS-2 models attain their unusually high sensitivity and special performance by using a built-in adjustable active crossover and a booster power amplifier on the midrange-bass driver. There is a completely passive crossover on the large two-inch upper-midrange / high frequency dome. The active crossover / amplifier enables the user to continually adjust both the volume of the lower midrange-bass cone driver and its crossover frequency relative to the passive dome. It adjusts those lower-midrange frequencies which are critical to a satisfactory balance in the difficult tabletop and shelf environment. The speaker adjusts for: 1.) The listeners distance to the speaker. 2.) The immediate physical reflective environment in which it is placed. 3.) The sonic character of the components connected to it. 4.) To suit the users individual taste and hearing. This flexibility means that the speakers can assimilate much more quickly and successfully in a much wider variety of installations than other speakers. This flexibility is not meant to substitute for standard bass and treble controls found on preamplifiers, integrated amplifiers and receivers. Those controls are meant to compensate for frequencies at the more extreme high and low portions of the spectrum. They will likely be necessary to compensate for widely varying program material particularly from the internet, for room acoustics and for individual taste. Another significant advantage is that the internal booster amplifier increases the gain of the lower-midrange / bass driver to match that of the much higher sensitivity aluminum dome thereby increasing the overall sensitivity of the speaker system to around 90 db, 1 watt, 1 meter. That sensitivity figure includes the bass frequencies around 70 cycles (for the CS-1 with the 4-inch driver) and 50 cycles (for the CS-2 with the 5 1/4-inch driver) accounting for the unusually strong bass performance of these speakers. It also makes it possible to use lower-wattage amplifiers, including superior small tube amplifiers, with such a small speaker.The CS-1 Features: * The cabinets height and angled front panel correctly places the speaker drivers at a seated listeners ear level when placed on a desk or table during computer use. * 4-inch lower midrange-bass driver with aluminum cone and long-travel suspension. * 2-inch upper midrange-tweeter driver with aluminum dome provides extreme clarity. The aluminum composition of both diaphragms is the reason the speakers sound character remains consistent from bass to treble. * Continuously variable volume level and frequency crossover points affecting only the bass-lower midrange relative to the upper-midrange / tweeter. * 8 ohms. Sensitivity: 90 db 1 watt @ 1 meter. 25-watt internal woofer-lower midrange power amplifier. * Passive crossover with no resistors or attenuation to the midrange-tweeter dome. * High durability black textured finish. * Size: 17H x 6 7/8W x 7 1/2D * Weight: 12 lbs per speaker. * 3-Year Warranty. * For 115-120 Volts AC, 60 Cycles. * Made in U.S.A. using U.S. and Global parts. ABOUT THIS Ebay OFFER: This product is available only from Wright Audio. Please note that a signature will be required at delivery. RETURNS:We are so sure you will love this component that it is sold with a 30-day trial period from the date of receipt with a money-back guarantee, less shipping costs. The unit must be returned undamaged and complete. There is no restocking fee. Please notify us that you intend to return the item so we can issue a Return Authorization Number. The contents of this listing (c) 2023 Wright Audio.