?ª˜¨¨?ª˜¨¨¨¨˜ª¤.¸*•.¸*•¸? ? Super eBayer ??¸•*¸.•*´¸.¤ª˜¨¨¨¨˜ª?¨¨˜ª? I do provide excellent service to every buyer. Please see my feedback before you bid, and see that everyone is happy with my prices, my product .... and my service. Good Day Thanks for looking. In that this item is as costly as it is, I must lay down some ground rules. This is for local pick-up only in Locust Grove, VA 22508. No, I will not and cannot ship it, at least at this point. Next, no nonsense please. Im too old. Dont need it. Getting old is problem enough for me. This is a cash upon your absolute satisfaction sale and do not pay me until you are gloriously happy, pulling out of our driveway. Please read the following: I bought out an entire recording studio, lock stock and barrel for a tidy sum. Among the items was this table. Comes with manuals and vintage warranty registrations. I listed it previously incorrectly, so I opened up the box to take appropriate pictures. I also contacted Jim at VPI, and here is what he told me. Its definitely an Aries 1 model, circa approximately 1994-1995. The arm is indeed a 10-inch (you only measure the armtube) JMW metal unipivot arm. A very solid, substantial table in its day, and lots of them still running from ~30 years ago. And, I received this from a fellow trader kind enough to share his knowledge. One thing VPI didnt tell you about your particular Aries 1 is that in place of the stock platter that came with the table, yours has the platter from the VPI TNT 5.The Aries had a real good platter: 1.25; thick, comprised of a 7/8 thick bottom section made of aluminum (onto which was bonded a thin sheet of lead, covered in cork), with a 3/8 thick top layer of Delrin. The same platter came on the TNT 3 and 4.The TNT 5 has a great one: 1.5; thick, the bottom section 5/8 thick stainless steel (no lead sheet), with a 7/8 thick top Delrin layer. Thats the platter you have, and its the one most VPI aficionados consider the best platter VPI has ever made. Congratulations, it (and the Aries table) is a beauty! There is full inspection available to the buyer, but no returns for any reason, once it meets with your approval. Buyer expected to pay local sales tax as well, so please come prepared, and do not say that this is all you brought. Must be picked up with 3 days. Thanks in advance. Enjoy the music. Dance while you can, and every time you can. Please see my other GREAT items up for sale on ebay!!!

?ª˜¨¨?ª˜¨¨¨¨˜ª¤.¸*•.¸*•¸? ? Super eBayer ??¸•*¸.•*´¸.¤ª˜¨¨¨¨˜ª?¨¨˜ª? I do provide excellent service to every buyer. Please see my feedback before you bid, and see that everyone is happy with my prices, my product .... and my service. Good Day Thanks for looking. In that this item is as costly as it is, I must lay down some ground rules. This is for local pick-up only in Locust Grove, VA 22508. No, I will not and cannot ship it, at least at this point. Next, no nonsense please. Im too old. Dont need it. Getting old is problem enough for me. This is a cash upon your absolute satisfaction sale and do not pay me until you are gloriously happy, pulling out of our driveway. Please read the following: I bought out an entire recording studio, lock stock and barrel for a tidy sum. Among the items was this table. Comes with manuals and vintage warranty registrations. I listed it previously incorrectly, so I opened up the box to take appropriate pictures. I also contacted Jim at VPI, and here is what he told me. Its definitely an Aries 1 model, circa approximately 1994-1995. The arm is indeed a 10-inch (you only measure the armtube) JMW metal unipivot arm. A very solid, substantial table in its day, and lots of them still running from ~30 years ago. And, I received this from a fellow trader kind enough to share his knowledge. One thing VPI didnt tell you about your particular Aries 1 is that in place of the stock platter that came with the table, yours has the platter from the VPI TNT 5.The Aries had a real good platter: 1.25; thick, comprised of a 7/8 thick bottom section made of aluminum (onto which was bonded a thin sheet of lead, covered in cork), with a 3/8 thick top layer of Delrin. The same platter came on the TNT 3 and 4.The TNT 5 has a great one: 1.5; thick, the bottom section 5/8 thick stainless steel (no lead sheet), with a 7/8 thick top Delrin layer. Thats the platter you have, and its the one most VPI aficionados consider the best platter VPI has ever made. Congratulations, it (and the Aries table) is a beauty! There is full inspection available to the buyer, but no returns for any reason, once it meets with your approval. Buyer expected to pay local sales tax as well, so please come prepared, and do not say that this is all you brought. Must be picked up with 3 days. Thanks in advance. Enjoy the music. Dance while you can, and every time you can. Please see my other GREAT items up for sale on ebay!!!

New never used, I paid over 1k dollars.

VPI - HW-40 Anniversary Direct Drive Turntable with a Soundsmith Zephyr MIMC Star ? ES Series low-output CartridgeSerial Number 153/400 madeMAKE AN OFFER! Celebrating 40 Years of Unparalleled American-Made Analog Performance: Limited to 400 Units, the Cutting-Edge VPI HW-40 Direct-Drive Turntable Sounds as Gorgeous as It LooksMSRP WITH SOUNDSMITH CARTDRIDGE $24,000. [NOTHING] fazed it... To say the VPI 40th Anniversary turntable is impressive is an understatement. Sonically, if it were twice the price, it would still be beating the competition.—Hi-Fi+, 2019 Turntable of the Year Award This deck is simply magnificent, and a delight in so many ways. Its easy to set up, painless to use, a joy to listen to and with a physical presence to savor. If perceived value is going to save the high-end, then VPI has nailed both the sound and the presentation.—Ken Kessler, Hi-Fi News, Outstanding Product review Ive heard several direct drive turntables but the HW-40 Anniversary surpasses them all. Its simply glorious. Its the best direct drive design that Ive ever encountered. Its also quite possibly the best turntable Ive ever heard.—Paul Rigby, The Audiophile Man, Golden Groovy Award Limited To Only 400 Units WorldwideInternally Damped Chassis (Front, Rear, and Top) Made from Solid Machined 3/4 6061 AluminumSolid Black Walnut Side PanelsBrand-New Direct-Drive Motor with Start, 33 1/3 RPM, and 45RPM Control ButtonsNew Version of 12 Gimbal 3D-Printed Fatboy Tonearm with Fine Adjustment, Robust Knob, and Triangular-to-Circular Taper for Resonance ReductionNew Gimbal Bearing Uses ABEC-9 Stainless-Steel Bearings Sourced from Japan for Ultra-Low FrictionTonearm Has Adjustable Counterweight on Threaded Shaft for Perfectly Accurate VTF SettingRemovable, Machined-Aluminum ArmboardAll-Internal Power Supply and Control Circuitry, Nothing Additional RequiredAll Machined Screws Attach into Blind-Tapped Holes for Clean AppearanceRemovable Hinged Dust Cover IncludedNordost Reference Wire Used ThroughoutMade in the U.S.AI will deliver this turntable in its original packaging myself within in a 250 mile radius Of ERIE ,Pa Functional Notes: Operational condition of this item is excellent, fully tested and no issues found.Shipping: Shipping within the Continental USA is $299 This includes securing to a pallet with adequate protection and shipping via FedEx Freight to a residential address anywhere in the Continental USA.

?ª˜¨¨?ª˜¨¨¨¨˜ª¤.¸*•.¸*•¸? ? Super eBayer ??¸•*¸.•*´¸.¤ª˜¨¨¨¨˜ª?¨¨˜ª? I do provide excellent service to every buyer. Please see my feedback before you bid, and see that everyone is happy with my prices, my product .... and my service. Good Day Thanks for looking. In that this item is as costly as it is, I must lay down some ground rules. This is for local pick-up only in Locust Grove, VA 22508. No, I will not and cannot ship it, at least at this point. Next, no nonsense please. Im too old. Dont need it. Getting old is problem enough for me. This is a cash upon your absolute satisfaction sale and do not pay me until you are gloriously happy, pulling out of our driveway. Please read the following: I bought out an entire recording studio, lock stock and barrel for a tidy sum. Among the items was this table. Comes with manuals and vintage warranty registrations. I listed it previously incorrectly, so I opened up the box to take appropriate pictures. I also contacted Jim at VPI, and here is what he told me. Its definitely an Aries 1 model, circa approximately 1994-1995. The arm is indeed a 10-inch (you only measure the armtube) JMW metal unipivot arm. A very solid, substantial table in its day, and lots of them still running from ~30 years ago. There is full inspection available to the buyer, but no returns for any reason, once it meets with your approval. Buyer expected to pay local sales tax as well, so please come prepared, and do not say that this is all you brought. Must be picked up with 3 days. Thanks in advance. Enjoy the music. Dance while you can, and every time you can. Please see my other GREAT items up for sale on ebay!!!

VPI Scout Turntable . No Tonearm. This listing is for a vpi scout turntable minus the tonearm, listing includes the base, platter, motor, power cord and a drive belt. NO TONEARM. You get only what is shown in the photos, the base has some minor scratches, I have tried my best to show them in the photos, everything works, all you need is a jmw 9 tonearm to get going.

This is a VPI JMW Memorial alignment jig. This came from a high end estate with a large quantity of turntables, all of which had already been liquidated by the time this jig turned up in a cabinet with other audio accessories, therefore I cant tell you specifically if this is for use with the JMW-9, JMW-10 or JMW-12 tonearms so please review the dimensions in the photo to determine if this is right for you. Im almost certain that the tonearm was on a model called the Classic, if that helps any. I measured from the white dot in the center of the grid which is where the stylus will rest, to the V groove of the fork which will be the base of the pivot point where the tonearm will be placed atop and it measured 10.15. The answer seems like it should be obvious to me but I dont want to make any incorrect claims. At any rate, its straight and true and in excellent preowned condition from a non-smoking environment and itll go home with the highest bidder so dont miss it! Ive taken a number of pictures and Ive enabled the scroll over zoom function so you can get an even closer look. So please do have a good look and if this looks right for you, be sure to place your bid TODAY for your chance to take it home! Payment due within 24 hours of auctions end, please. The sooner you pay, the sooner youll receive them. I ship same day or following business day, depending on when the auction ends, so youll get it fast! And as always, local pickup at my home is welcome!

?ª˜¨¨?ª˜¨¨¨¨˜ª¤.¸*•.¸*•¸? ? Super eBayer ??¸•*¸.•*´¸.¤ª˜¨¨¨¨˜ª?¨¨˜ª? I do provide excellent service to every buyer. Please see my feedback before you bid, and see that everyone is happy with my prices, my product .... and my service. Good Day Thanks for looking. In that this item is as costly as it is, I must lay down some ground rules. This is for local pick-up only in Locust Grove, VA 22508. No, I will not and cannot ship it, at least at this point. Next, no nonsense please. Im too old. Dont need it. Getting old is problem enough for me. This is a cash upon your absolute satisfaction sale and do not pay me until you are gloriously happy, pulling out of our driveway. Please read the following: I bought out an entire recording studio, lock stock and barrel for a tidy sum. Among the items was this table. Comes with manuals and vintage warranty registrations. I listed it previously incorrectly, so I opened up the box to take appropriate pictures. I also contacted Jim at VPI, and here is what he told me. Its definitely an Aries 1 model, circa approximately 1994-1995. The arm is indeed a 10-inch (you only measure the armtube) JMW metal unipivot arm. A very solid, substantial table in its day, and lots of them still running from ~30 years ago. There is full inspection available to the buyer, but no returns for any reason, once it meets with your approval. Buyer expected to pay local sales tax as well, so please come prepared, and do not say that this is all you brought. Must be picked up with 3 days. Thanks in advance. Enjoy the music. Dance while you can, and every time you can. Please see my other GREAT items up for sale on ebay!!!

?ª˜¨¨?ª˜¨¨¨¨˜ª¤.¸*•.¸*•¸? ? Super eBayer ??¸•*¸.•*´¸.¤ª˜¨¨¨¨˜ª?¨¨˜ª? I do provide excellent service to every buyer. Please see my feedback before you bid, and see that everyone is happy with my prices, my product .... and my service. Good Day, and thanks for looking. In that this item is as costly as it is, I must lay down some ground rules first. This is for local pick-up only in Locust Grove, VA 22508. No, I will not and cannot ship it Next, no nonsense please. Too old. Dont need it. Getting old is problem enough for me. This is a cash upon your absolute satisfaction sale and do not pay me until you are gloriously happy, pulling out of our driveway. Please read the following: I bought out an entire recording studio, lock stock and barrel for a tidy sum. Among the items was this table. It appears brand new, and still wrapped. The manuals appear new, with warranty registration, and sealed. In that it is in this condition, I honestly did not wish to open it, and then, its an open box. Also, I did put open box in the description as it is open, but appears brand new and pristine. There is full inspection available to the buyer, but no returns for any reason, once it meets with your approval. Buyer expected to pay local sales tax as well, so please come prepared, and do not say that this is all you brought. Must be picked up with 3 days. Thanks in advance. Enjoy the music. Dance while you can, and every time you can. Please see my other items up for sale on ebay. * Item will ship within 3 days of payment, and will be delivered to buyers registered Paypal physical address. Also, sorry but no zero feedback bidders, please!! * U.S.A CONTINENTAL SHIPPING (48 states only) * After you receive your item, if you feel the there is a discrepancy between the auction description and the item you received, then please contact me immediately to allow me the opportunity to resolve any problem. I aim to please!

?ª˜¨¨?ª˜¨¨¨¨˜ª¤.¸*•.¸*•¸? ? Super eBayer ??¸•*¸.•*´¸.¤ª˜¨¨¨¨˜ª?¨¨˜ª? I do provide excellent service to every buyer. Please see my feedback before you bid, and see that everyone is happy with my prices, my product .... and my service. Good Day, and thanks for looking. In that this item is as costly as it is, I must lay down some ground rules first. This is for local pick-up only in Locust Grove, VA 22508. No, I will not and cannot ship it Next, no nonsense please. Too old. Dont need it. Getting old is problem enough for me. This is a cash upon your absolute satisfaction sale and do not pay me until you are gloriously happy, pulling out of our driveway. Please read the following: I bought out an entire recording studio, lock stock and barrel for a tidy sum. Among the items was this table. It appears brand new, and still wrapped. The manuals appear new, with warranty registration, and sealed. In that it is in this condition, I honestly did not wish to open it, and then, its an open box. Also, I did put open box in the description as it is open, but appears brand new and pristine. There is full inspection available to the buyer, but no returns for any reason, once it meets with your approval. Buyer expected to pay local sales tax as well, so please come prepared, and do not say that this is all you brought. Must be picked up with 3 days. Thanks in advance. Enjoy the music. Dance while you can, and every time you can. Please see my other items up for sale on ebay. * Item will ship within 3 days of payment, and will be delivered to buyers registered Paypal physical address. Also, sorry but no zero feedback bidders, please!! * U.S.A CONTINENTAL SHIPPING (48 states only) * After you receive your item, if you feel the there is a discrepancy between the auction description and the item you received, then please contact me immediately to allow me the opportunity to resolve any problem. I aim to please!

PREOWNED - FULLY TESTED - INCLUDES ORIGINAL BOX/PACKING, BELT, POWER SUPPLY, PLATTER, HRX WEIGHT, TRACKING FORCE GAUGE, alignment jig, SOUNDSMITH Counter-intuitive on the counterweight

VPI TNT Turntable 12 Inch Tonearm. NO CARTRIDGE