This VPI Scout turntable comes with the JMW 9 Memorial Tonearm, Audio Technica AT-VM95SH MM cartridge and stylus. Belt drive - 45RPM or 33.3RPM. Table is used - rated good condition due to uncertain age. Table includes dust cover and accessories as shown. Ships in original box. Dust cover ships separately.

?ª˜¨¨?ª˜¨¨¨¨˜ª¤.¸*•.¸*•¸? ? Super eBayer ??¸•*¸.•*´¸.¤ª˜¨¨¨¨˜ª?¨¨˜ª? I do provide excellent service to every buyer. Please see my feedback before you bid, and see that everyone is happy with my prices, my product .... and my service. Good Day! I must apologize for changing this auction to local pickup only. I am doing this primarily due to one jerk. So, I am NOT shipping this. Id rather sell it really cheap to someone nice thats local, and they can see it for themselves, and not play games like swapping parts. I just dropped the price to a honey, lets go for a drive price. This was NOT my personal item. I did not use it, test it, or know any more about it than I have pictured or told by VPI or other VPI table owners. You are bidding on what you see pictured/ I wish for the buyer to see for himself that received what is pictured, and the condition it is in, is as described. I cannot offer any more information than that. All buyers please bid accordingly, if interested. I have done my very best to present this item honestly and accurately. This IS for local pick-up only in Locust Grove, VA 22508. Next, no nonsense please. Im too old. Getting older is problem enough for me. My understanding is that this is one of the most sought after and rare ever sold by VPI. Please read the following: I bought out an entire recording studio, lock stock and barrel for a tidy sum. Among the items was this table. Comes with manuals and vintage warranty registrations. I also contacted Jim at VPI, and here is what he told me. Its definitely an Aries 1 model, circa approximately 1994-1995. The arm is indeed a 10-inch (you only measure the armtube) JMW metal unipivot arm. A very solid, substantial table in its day, and lots of them still running from ~30 years ago. And, I received this from a fellow trader kind enough to share his knowledge. One thing VPI didnt tell you about your particular Aries 1 is that in place of the stock platter that came with the table, yours has the platter from the VPI TNT 5.The Aries had a real good platter: 1.25; thick, comprised of a 7/8 thick bottom section made of aluminum (onto which was bonded a thin sheet of lead, covered in cork), with a 3/8 thick top layer of Delrin. The same platter came on the TNT 3 and 4.The TNT 5 has a great one: 1.5; thick, the bottom section 5/8 thick stainless steel (no lead sheet), with a 7/8 thick top Delrin layer. Thats the platter you have, and its the one most VPI aficionados consider the best platter VPI has ever made. Congratulations, it (and the Aries table) is a beauty! There is full inspection available to the buyer, but no returns for any reason, once it meets with your approval. Must be picked up with 3 days, local pickup. I will make myself available within that timeframe. No exceptions. No offers outside of ebay please. Thanks in advance. Enjoy the music. Dance while you can, and every time you can. Please see my other GREAT items up for sale on ebay!!!

ITEM DESCRIPTION: For sale is a VPI JMW 10 unipivot metal armwand. (Tonearm Only: Turntable and Cartridge not available). Compatible not only with VPI but with most hifi turntables as well. Cabling tested for functionality before sale. Tonearm is in a very good condition, please review all photographs provided for all details.  The quality of the workmanship of the JMW 10 tonearm is as just superb. It’s setup makes it very simple to adjust the VTA for records of different thickness, a very nice touch. Item will be well packed for safe arrival. ------------------------------------------------- PHYSICAL CONDITION: Used but in a great shape. Check pictures for cosmetic condition -------------------------------------------------------- SHIPPING: Shipping to USA via USPS. Local pick up is welcome with no charge.  ------------------------------------------------- RETURN: Item has been described to the best of my knowledge and please ask questions before bidding. Due to nature of used equipment, item is being sold AS IS, NO RETURN. ------------------------------------------------- PAYMENT: PayPal or cash for local pick up. Pay within 3 days after end of auction. ------------------------------------------------- OTHERS: Any dispute can be resolved with friendly message exchange so please contact me first before involving eBay. 

VPI JWM 9T tonearm wand. This auction is for the wand only as pictured. It is not a complete tonearm, just the upper portion designed to allow you to switch cartridges/arms on your VPI tonearm. $1000 new. This one is in excellent condition. Works perfectly. If you have more than one cartridge and a JMW 9 tonearm? Get an extra armtube and enjoy the benefits of multiple cartridges today! Easy to switch, just remove the old armwand and replace with the new one. That simple! You can switch cartridges in less than 30 seconds.

VPI HW-19 - Eminent Technology Tonearm 2 w/ air pump - Turntable Record Player -The Turntable is a VPI HW-19-The Tone arm is a Eminent Techology Tonearm 2-Air pump is Eminent Techology SPP-6GA, AC 120V. 60Hz, 8.5W-Grado Cartridge. I am unsure which model. We are not Audio Specialists. Our Shop acquired this turntable from the previous owner.It came to us in the present condition. The Tonearm was quickly soldered to male RCA Leads. It is currently Not Grounded to the turntable. This setup has been Tested and appears to be operational. The air pump is operational. The turntable is operational. The setup could use some work to bring it to perfection. Recommended work to be done.-Replace Belt-Install female RCA Jacks, and Ground the tonearm/RCA connection to the turntable-Perhaps replace the tubing for the air pump as it seems to have been throw together quickly from nearby parts. Our Shop is based in Bellingham,WA, 98225. If you are located nearby, Local pickup would be ideal. If we are shipping the item to you, it will need to be fully disassembled, including UNSoldering the RCA Leads from the tonearm.

PREOWNED - $2800 LIST! - FULLY TESTED - INCLUDES ORIGINAL BOX/PACKING, MANUAL, 20LBS/12 PLATTER, 300RPM MOTOR UPGRADE, CONE FEET, CLAMP, POWER CABLE, ALIGNMENT JIG, 2 DRIVE BELTS, ANTI-SKATE WEIGHT, MAT, COUNTER INTUITIVE

?ª˜¨¨?ª˜¨¨¨¨˜ª¤.¸*•.¸*•¸? ? Super eBayer ??¸•*¸.•*´¸.¤ª˜¨¨¨¨˜ª?¨¨˜ª? I do provide excellent service to every buyer. Please see my feedback before you bid, and see that everyone is happy with my prices, my product .... and my service. Good Day Thanks for looking. In that this item is as costly as it is, I must lay down some ground rules. This is for local pick-up only in Locust Grove, VA 22508. No, I will not and cannot ship it, at least at this point. Next, no nonsense please. Im too old. Dont need it. Getting old is problem enough for me. My understanding is that this is one of the most sought after and rare ever sold by VPI. It is worth the drive. I have many offers if I will ship, and even more than I am asking. I cannot risk it. Please read the following: I bought out an entire recording studio, lock stock and barrel for a tidy sum. Among the items was this table. Comes with manuals and vintage warranty registrations. I also contacted Jim at VPI, and here is what he told me. Its definitely an Aries 1 model, circa approximately 1994-1995. The arm is indeed a 10-inch (you only measure the armtube) JMW metal unipivot arm. A very solid, substantial table in its day, and lots of them still running from ~30 years ago. And, I received this from a fellow trader kind enough to share his knowledge. One thing VPI didnt tell you about your particular Aries 1 is that in place of the stock platter that came with the table, yours has the platter from the VPI TNT 5.The Aries had a real good platter: 1.25; thick, comprised of a 7/8 thick bottom section made of aluminum (onto which was bonded a thin sheet of lead, covered in cork), with a 3/8 thick top layer of Delrin. The same platter came on the TNT 3 and 4.The TNT 5 has a great one: 1.5; thick, the bottom section 5/8 thick stainless steel (no lead sheet), with a 7/8 thick top Delrin layer. Thats the platter you have, and its the one most VPI aficionados consider the best platter VPI has ever made. Congratulations, it (and the Aries table) is a beauty! There is full inspection available to the buyer, but no returns for any reason, once it meets with your approval. Must be picked up with 3 days. I will make myself available for your inspection within that timeframe. No exceptions. No offers outside of ebay please. Thanks in advance. Enjoy the music. Dance while you can, and every time you can. Please see my other GREAT items up for sale on ebay!!!

?ª˜¨¨?ª˜¨¨¨¨˜ª¤.¸*•.¸*•¸? ? Super eBayer ??¸•*¸.•*´¸.¤ª˜¨¨¨¨˜ª?¨¨˜ª? I do provide excellent service to every buyer. Please see my feedback before you bid, and see that everyone is happy with my prices, my product .... and my service. Good Day Thanks for looking. In that this item is as costly as it is, I must lay down some ground rules. This is for local pick-up only in Locust Grove, VA 22508. No, I will not and cannot ship it, at least at this point. Next, no nonsense please. Im too old. Dont need it. Getting old is problem enough for me. This is a cash upon your absolute satisfaction sale and do not pay me until you are gloriously happy, pulling out of our driveway. Please read the following: I bought out an entire recording studio, lock stock and barrel for a tidy sum. Among the items was this table. Comes with manuals and vintage warranty registrations. I listed it previously incorrectly, so I opened up the box to take appropriate pictures. I also contacted Jim at VPI, and here is what he told me. Its definitely an Aries 1 model, circa approximately 1994-1995. The arm is indeed a 10-inch (you only measure the armtube) JMW metal unipivot arm. A very solid, substantial table in its day, and lots of them still running from ~30 years ago. And, I received this from a fellow trader kind enough to share his knowledge. One thing VPI didnt tell you about your particular Aries 1 is that in place of the stock platter that came with the table, yours has the platter from the VPI TNT 5.The Aries had a real good platter: 1.25; thick, comprised of a 7/8 thick bottom section made of aluminum (onto which was bonded a thin sheet of lead, covered in cork), with a 3/8 thick top layer of Delrin. The same platter came on the TNT 3 and 4.The TNT 5 has a great one: 1.5; thick, the bottom section 5/8 thick stainless steel (no lead sheet), with a 7/8 thick top Delrin layer. Thats the platter you have, and its the one most VPI aficionados consider the best platter VPI has ever made. Congratulations, it (and the Aries table) is a beauty! There is full inspection available to the buyer, but no returns for any reason, once it meets with your approval. Buyer expected to pay local sales tax as well, so please come prepared, and do not say that this is all you brought. Must be picked up with 3 days. Thanks in advance. Enjoy the music. Dance while you can, and every time you can. Please see my other GREAT items up for sale on ebay!!!

VPI JMW-10.5i Tonearm(Tonearm Only- Turntable and Cartridge not available) 10.5 Metal Tonearm Compatible with most hifi turntables Cabling tested for functionality before sale

This is a VPI JMW Memorial alignment jig. This came from a high end estate with a large quantity of turntables, all of which had already been liquidated by the time this jig turned up in a cabinet with other audio accessories, therefore I cant tell you specifically if this is for use with the JMW-9, JMW-10 or JMW-12 tonearms so please review the dimensions in the photo to determine if this is right for you. Im almost certain that the tonearm was on a model called the Classic, if that helps any. I measured from the white dot in the center of the grid which is where the stylus will rest, to the V groove of the fork which will be the base of the pivot point where the tonearm will be placed atop and it measured 10.15. The answer seems like it should be obvious to me but I dont want to make any incorrect claims. At any rate, its straight and true and in excellent preowned condition from a non-smoking environment and itll go home with the highest bidder so dont miss it! Ive taken a number of pictures and Ive enabled the scroll over zoom function so you can get an even closer look. So please do have a good look and if this looks right for you, be sure to place your bid TODAY for your chance to take it home! Payment due within 24 hours of auctions end, please. The sooner you pay, the sooner youll receive them. I ship same day or following business day, depending on when the auction ends, so youll get it fast! And as always, local pickup at my home is welcome!

?ª˜¨¨?ª˜¨¨¨¨˜ª¤.¸*•.¸*•¸? ? Super eBayer ??¸•*¸.•*´¸.¤ª˜¨¨¨¨˜ª?¨¨˜ª? I do provide excellent service to every buyer. Please see my feedback before you bid, and see that everyone is happy with my prices, my product .... and my service. Good Day Thanks for looking. In that this item is as costly as it is, I must lay down some ground rules. This is for local pick-up only in Locust Grove, VA 22508. No, I will not and cannot ship it, at least at this point. Next, no nonsense please. Im too old. Dont need it. Getting old is problem enough for me. This is a cash upon your absolute satisfaction sale and do not pay me until you are gloriously happy, pulling out of our driveway. Please read the following: I bought out an entire recording studio, lock stock and barrel for a tidy sum. Among the items was this table. Comes with manuals and vintage warranty registrations. I listed it previously incorrectly, so I opened up the box to take appropriate pictures. I also contacted Jim at VPI, and here is what he told me. Its definitely an Aries 1 model, circa approximately 1994-1995. The arm is indeed a 10-inch (you only measure the armtube) JMW metal unipivot arm. A very solid, substantial table in its day, and lots of them still running from ~30 years ago. And, I received this from a fellow trader kind enough to share his knowledge. One thing VPI didnt tell you about your particular Aries 1 is that in place of the stock platter that came with the table, yours has the platter from the VPI TNT 5.The Aries had a real good platter: 1.25; thick, comprised of a 7/8 thick bottom section made of aluminum (onto which was bonded a thin sheet of lead, covered in cork), with a 3/8 thick top layer of Delrin. The same platter came on the TNT 3 and 4.The TNT 5 has a great one: 1.5; thick, the bottom section 5/8 thick stainless steel (no lead sheet), with a 7/8 thick top Delrin layer. Thats the platter you have, and its the one most VPI aficionados consider the best platter VPI has ever made. Congratulations, it (and the Aries table) is a beauty! There is full inspection available to the buyer, but no returns for any reason, once it meets with your approval. Buyer expected to pay local sales tax as well, so please come prepared, and do not say that this is all you brought. Must be picked up with 3 days. Thanks in advance. Enjoy the music. Dance while you can, and every time you can. Please see my other GREAT items up for sale on ebay!!!

?ª˜¨¨?ª˜¨¨¨¨˜ª¤.¸*•.¸*•¸? ? Super eBayer ??¸•*¸.•*´¸.¤ª˜¨¨¨¨˜ª?¨¨˜ª? I do provide excellent service to every buyer. Please see my feedback before you bid, and see that everyone is happy with my prices, my product .... and my service. Good Day Thanks for looking. In that this item is as costly as it is, I must lay down some ground rules. This is for local pick-up only in Locust Grove, VA 22508. No, I will not and cannot ship it, at least at this point. Next, no nonsense please. Im too old. Dont need it. Getting old is problem enough for me. This is a cash upon your absolute satisfaction sale and do not pay me until you are gloriously happy, pulling out of our driveway. Please read the following: I bought out an entire recording studio, lock stock and barrel for a tidy sum. Among the items was this table. Comes with manuals and vintage warranty registrations. I listed it previously incorrectly, so I opened up the box to take appropriate pictures. I also contacted Jim at VPI, and here is what he told me. Its definitely an Aries 1 model, circa approximately 1994-1995. The arm is indeed a 10-inch (you only measure the armtube) JMW metal unipivot arm. A very solid, substantial table in its day, and lots of them still running from ~30 years ago. And, I received this from a fellow trader kind enough to share his knowledge. One thing VPI didnt tell you about your particular Aries 1 is that in place of the stock platter that came with the table, yours has the platter from the VPI TNT 5.The Aries had a real good platter: 1.25; thick, comprised of a 7/8 thick bottom section made of aluminum (onto which was bonded a thin sheet of lead, covered in cork), with a 3/8 thick top layer of Delrin. The same platter came on the TNT 3 and 4.The TNT 5 has a great one: 1.5; thick, the bottom section 5/8 thick stainless steel (no lead sheet), with a 7/8 thick top Delrin layer. Thats the platter you have, and its the one most VPI aficionados consider the best platter VPI has ever made. Congratulations, it (and the Aries table) is a beauty! There is full inspection available to the buyer, but no returns for any reason, once it meets with your approval. Buyer expected to pay local sales tax as well, so please come prepared, and do not say that this is all you brought. Must be picked up with 3 days. Thanks in advance. Enjoy the music. Dance while you can, and every time you can. Please see my other GREAT items up for sale on ebay!!!

?ª˜¨¨?ª˜¨¨¨¨˜ª¤.¸*•.¸*•¸? ? Super eBayer ??¸•*¸.•*´¸.¤ª˜¨¨¨¨˜ª?¨¨˜ª? I do provide excellent service to every buyer. Please see my feedback before you bid, and see that everyone is happy with my prices, my product .... and my service. Good Day Thanks for looking. In that this item is as costly as it is, I must lay down some ground rules. This is for local pick-up only in Locust Grove, VA 22508. No, I will not and cannot ship it, at least at this point. Next, no nonsense please. Im too old. Dont need it. Getting old is problem enough for me. This is a cash upon your absolute satisfaction sale and do not pay me until you are gloriously happy, pulling out of our driveway. Please read the following: I bought out an entire recording studio, lock stock and barrel for a tidy sum. Among the items was this table. Comes with manuals and vintage warranty registrations. I listed it previously incorrectly, so I opened up the box to take appropriate pictures. I also contacted Jim at VPI, and here is what he told me. Its definitely an Aries 1 model, circa approximately 1994-1995. The arm is indeed a 10-inch (you only measure the armtube) JMW metal unipivot arm. A very solid, substantial table in its day, and lots of them still running from ~30 years ago. And, I received this from a fellow trader kind enough to share his knowledge. One thing VPI didnt tell you about your particular Aries 1 is that in place of the stock platter that came with the table, yours has the platter from the VPI TNT 5.The Aries had a real good platter: 1.25; thick, comprised of a 7/8 thick bottom section made of aluminum (onto which was bonded a thin sheet of lead, covered in cork), with a 3/8 thick top layer of Delrin. The same platter came on the TNT 3 and 4.The TNT 5 has a great one: 1.5; thick, the bottom section 5/8 thick stainless steel (no lead sheet), with a 7/8 thick top Delrin layer. Thats the platter you have, and its the one most VPI aficionados consider the best platter VPI has ever made. Congratulations, it (and the Aries table) is a beauty! There is full inspection available to the buyer, but no returns for any reason, once it meets with your approval. Buyer expected to pay local sales tax as well, so please come prepared, and do not say that this is all you brought. Must be picked up with 3 days. Thanks in advance. Enjoy the music. Dance while you can, and every time you can. Please see my other GREAT items up for sale on ebay!!!

New never used, I paid over 1k dollars.

VPI - HW-40 Anniversary Direct Drive Turntable with a Soundsmith Zephyr MIMC Star ? ES Series low-output CartridgeSerial Number 153/400 madeMAKE AN OFFER! Celebrating 40 Years of Unparalleled American-Made Analog Performance: Limited to 400 Units, the Cutting-Edge VPI HW-40 Direct-Drive Turntable Sounds as Gorgeous as It LooksMSRP WITH SOUNDSMITH CARTDRIDGE $24,000. [NOTHING] fazed it... To say the VPI 40th Anniversary turntable is impressive is an understatement. Sonically, if it were twice the price, it would still be beating the competition.—Hi-Fi+, 2019 Turntable of the Year Award This deck is simply magnificent, and a delight in so many ways. Its easy to set up, painless to use, a joy to listen to and with a physical presence to savor. If perceived value is going to save the high-end, then VPI has nailed both the sound and the presentation.—Ken Kessler, Hi-Fi News, Outstanding Product review Ive heard several direct drive turntables but the HW-40 Anniversary surpasses them all. Its simply glorious. Its the best direct drive design that Ive ever encountered. Its also quite possibly the best turntable Ive ever heard.—Paul Rigby, The Audiophile Man, Golden Groovy Award Limited To Only 400 Units WorldwideInternally Damped Chassis (Front, Rear, and Top) Made from Solid Machined 3/4 6061 AluminumSolid Black Walnut Side PanelsBrand-New Direct-Drive Motor with Start, 33 1/3 RPM, and 45RPM Control ButtonsNew Version of 12 Gimbal 3D-Printed Fatboy Tonearm with Fine Adjustment, Robust Knob, and Triangular-to-Circular Taper for Resonance ReductionNew Gimbal Bearing Uses ABEC-9 Stainless-Steel Bearings Sourced from Japan for Ultra-Low FrictionTonearm Has Adjustable Counterweight on Threaded Shaft for Perfectly Accurate VTF SettingRemovable, Machined-Aluminum ArmboardAll-Internal Power Supply and Control Circuitry, Nothing Additional RequiredAll Machined Screws Attach into Blind-Tapped Holes for Clean AppearanceRemovable Hinged Dust Cover IncludedNordost Reference Wire Used ThroughoutMade in the U.S.AI will deliver this turntable in its original packaging myself within in a 250 mile radius Of ERIE ,Pa Functional Notes: Operational condition of this item is excellent, fully tested and no issues found.Shipping: Shipping within the Continental USA is $299 This includes securing to a pallet with adequate protection and shipping via FedEx Freight to a residential address anywhere in the Continental USA.

?ª˜¨¨?ª˜¨¨¨¨˜ª¤.¸*•.¸*•¸? ? Super eBayer ??¸•*¸.•*´¸.¤ª˜¨¨¨¨˜ª?¨¨˜ª? I do provide excellent service to every buyer. Please see my feedback before you bid, and see that everyone is happy with my prices, my product .... and my service. Good Day Thanks for looking. In that this item is as costly as it is, I must lay down some ground rules. This is for local pick-up only in Locust Grove, VA 22508. No, I will not and cannot ship it, at least at this point. Next, no nonsense please. Im too old. Dont need it. Getting old is problem enough for me. This is a cash upon your absolute satisfaction sale and do not pay me until you are gloriously happy, pulling out of our driveway. Please read the following: I bought out an entire recording studio, lock stock and barrel for a tidy sum. Among the items was this table. Comes with manuals and vintage warranty registrations. I listed it previously incorrectly, so I opened up the box to take appropriate pictures. I also contacted Jim at VPI, and here is what he told me. Its definitely an Aries 1 model, circa approximately 1994-1995. The arm is indeed a 10-inch (you only measure the armtube) JMW metal unipivot arm. A very solid, substantial table in its day, and lots of them still running from ~30 years ago. There is full inspection available to the buyer, but no returns for any reason, once it meets with your approval. Buyer expected to pay local sales tax as well, so please come prepared, and do not say that this is all you brought. Must be picked up with 3 days. Thanks in advance. Enjoy the music. Dance while you can, and every time you can. Please see my other GREAT items up for sale on ebay!!!