Batteriepack Batterie Technics Vorstufe 9,6V Ni-Cd SU-C1000 SU-C1010 Hiermiet verkaufe ich einen neuen Batteriepack vorgesehen für Vorstufen von Technics. ER findet seine Anwendung in: SU-C1000SU-C1000mk2SU-C1010. Batteriepack ist neu mit org. Stecker. Ni-Cd wie im Original kein Li-Mh.

Technics EPA-100 Tonearm Titanium Nitride. Good Continuity Bearings Need Reset. The beading’s seem move free and have no play but seem a little misaligned The armrest was broken and I glued it back on Sold as is.

Technics SH100S original Headshell for Epa 100 tonearm The headshell is in excellent condition Photos are from the actual item See my other items for more turntable accessories. (headshell/cartridges) I can offer shipping discount on multiple items Shipping will be Standard International Mail with tracking number, sign in on delivery is required -friendly custom declaration for all buyers -

Original Technics EPA-B500 EPA-100MK2 Phono Cord Cable gold plated in excellent condition.

Batteriepack Batterie Technics Vorstufe 9,6V Ni-Cd SU-C1000 SU-C1010 Hiermiet verkaufe ich einen neuen Batteriepack vorgesehen für Vorstufen von Technics. ER findet seine Anwendung in: SU-C1000SU-C1000mk2SU-C1010. Batteriepack ist neu mit org. Stecker. Ni-Cd wie im Original kein Li-Mh.

Original Technics EPA-B500 EPA-100MK2 Phono Cord Cable gold plated in excellent condition.

Item Description Condition : USED Very GoodEffective Tonearm Length: 250mmOverhang: 15mmTracking Error: +1.1° (30cm record inner groove) / +2.1° (30cm record outer groove)Tracking Force Adjustment Range: 0–3gHeight Adjustment Range: 45mm–90mm (6mm helicoid section) Shipping Standard Shipping (Japan Post , FedEx , DHL) The package will arrive 5-14 days after shipment.Other Term Import duties, taxes, customs fees, and various charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. If the cancellation is due to the buyer, we will charge a PayPal fee. If there is a remote charge for your address, we will charge you for additional shipping. Thank you for your understanding.

Batteriepack Batterie Technics Vorstufe 9,6V Ni-Cd SU-C1000 SU-C1010 Hiermiet verkaufe ich einen neuen Batteriepack vorgesehen für Vorstufen von Technics. ER findet seine Anwendung in: SU-C1000SU-C1000mk2SU-C1010. Batteriepack ist neu mit org. Stecker. Ni-Cd wie im Original kein Li-Mh.

This is a sub-weight for Technics tonearms EPA-100, EPA-100mk2, and EPA-100PN, weighing 50g. The internal diameter matches the outer diameter of the main weight. The sub-weight and stopper are made from brass (S3604), providing a luxurious appearance. Please note that as a manufactured item, there may be lathe marks or chuck scratches. The product includes the sub-weight and a stopper (M4 screw) with protective tape. This item is useful for achieving balance when the cartridge and shell weight is too heavy. It is recommended to set the needle pressure using a precision scale. This item expands the options for choosing cartridges and shells, although it does not guarantee zero balance. Users without a sub-weight are encouraged to try this opportunity. Shipping from Japan with Tracking Number & Insurance. I promise fast shipping via FedEx or DHL as soon as possible! Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

Tone Arm Technics EPA-100 with PHONO cable etc. Lifter oil replenished Excellent DescriptionAbout This ItemsUSEDConditionAs this is a used product, there may be slight scratches and scuffs, but overall it is clean.Shipping -Free express shipping. We will always ship with a tracking number. You can check the delivery status at any time. -We will ship within 5 business days after payment is confirmed. Ships from Monday to Friday (excluding Saturdays, Sundays, and holidays). Shipping is not possible on weekends as shipping companies are closed. -As the shipping address will only be the address registered on eBay, we cannot accept changes to the shipping address after purchase. If you would like the item to be shipped to a different address, please change your eBay registered address before placing your order.International Buyers - Please Note:-Import duties, taxes, charges, etc. are not included in the product price or shipping cost. These charges are the responsibility of the purchaser. Please check with your countrys customs office to determine what these additional costs will be before bidding or buying.-Fraudulent acts such as writing invoices lower than the actual amount and reducing customs duties and consumption taxes are prohibited by law, so our store does not engage in any such fraudulent activities. Lastly-As our company operates in Japan, all products are genuine.-All products will be carefully packaged and shipped directly from Japan.-We also have a large selection of Japanese products. Click here for the store page https://www.ebay.com/str/atozcooljp

Batteriepack Batterie Technics Vorstufe 9,6V Ni-Cd SU-C1000 SU-C1010 Hiermiet verkaufe ich einen neuen Batteriepack vorgesehen für Vorstufen von Technics. ER findet seine Anwendung in: SU-C1000SU-C1000mk2SU-C1010. Batteriepack ist neu mit org. Stecker. Ni-Cd wie im Original kein Li-Mh.

Technics EPA-100 Dynamic Damping Universal Tone Arm Pickup Arm Vintage Audio #17 Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed with the following contents. Output from both channels.Lifter descent speed (Oil refilled).Each adjustment point, operation feeling.Height adjustment, etc. Polished and cleaned for each part.The appearance is a beautiful product without any noticeable scratches.Please refer to the photo. *Turntables and other equipment (excluding accessories for the unit) shown in the photos are for presentation purposes only and are not part of the product. Overview The universal tone arm was developed to address the major issue of low-frequency resonance damping in pickup systems. The variable dynamic damping mechanism is capable of properly damping low-frequency resonances of both high and low compliance types, bringing out the full potential of the cartridge. The main weight is split and supported by a spring on one side, and floats on the other side by the attractive force between two magnets placed opposite each other at the rear of the weight and the damping selector. The resonance of the weight is damped by viscous silicon oil and a damping cylinder, effectively damping the resonance of the entire pickup system and successfully reducing resonance to less than half that of conventional systems. The resonance frequency of the main weight can be adjusted with the damping selector at the rear of the main weight according to the cartridge compliance, and the amount of braking can be set to an appropriate value. The arm pipe, 9.5 mm in outer diameter and 0.5 mm thick, is made of titanium nitride pipe arm, which is made of lightweight and mechanically strong titanium that has been further hardened by nitrogen. The tone arms support structure is made of titanium nitride pipe. Both the horizontal and vertical rotation sections of the tone arm are supported by a gimbal suspension system that uses bearings with high-precision pivot bearings manufactured in-house. The horizontal and vertical rotation axes intersect at a single point, minimizing differences in initial sensitivity and sensitivity in all rotation directions. Rubies, whose coefficient of friction is about 1/3 that of steel, are super-finished into balls with a sphericity of ±0.5?m, and 20 rubies are used.Combined with the gimbal suspension system, it achieves a high initial sensitivity of 5mg. Specifications Type: Universal tone arm with variable dynamic dampingEffective bearing clearance: 30mm both horizontally and verticallyArm pipe: Boron Titanium pipeArm effective length: 250mmArm length range: 322mm to 350mmArm rear length range: 66.5mm - 94.5mmArm height adjustment range: 44mm - 64mm (helicoid part 20mm)Overhang: 15mmHorizontal tracking error angle: +1°6(inner circumference of 30cm record), +2°6(outer circumference of 30cm record)Rotation axis sensitivity: Horizontal, vertical, initial sensitivity 5mgArm effective weight: 22g (cartridge dead weight 6.5g, needle pressure 1.25g)Arm resonance frequency: 9.8Hz, (Compliance: 12x10-6cm/dyne, cartridge weight 6.5g, needle pressure 1.25g)Arm resonance sharpness (Q): 6dB or less (at optimum adjustment)Needle pressure adjustment range: 0 to 3gShell weight: 9.5g (boron aluminum)Shell terminal lug: 1.2mm?, lug for 4-pin terminalApplicable cartridge weight: 5g to 10gArm mounting hole diameter: 62mm? Accessories WeightWeight fixing screwHead shell (Technics)Mounting nut/washerPHONO cableInstruction Manual (copy)(Japanese)Mounting gauge (copy) Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

Description Condition : Used Maintained / Test Completed. There are some scratches, dirt. Output from both channels confirmed. No problem with lifter descent speed. Oil replenished. Height adjusted.Brand : Technics Model : EPA-100 [Set includes] Weight Weight fixing screw Mounting nut/washer PHONO cable Instruction manual (copy print) Mounting gauge (copy print)---------- Overall length: 322~350mmmm Run Length: 250mm Overhang: 15mm Needle pressure range: 0 ~ 3g Cartridge weight : 5g-10gShippingShips from Japan. Ships from FedEx or Japan Post. We ship by airmail with tracking number and insurance.If you live in a remote area, please pay additional shipping cost 25USD for us. If you are concerned, please contact us before buying. International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.These charges are usually levied by the delivering carrier or when you collect the item. Please note that this is not to be confused with additional delivery charges. We do not list items below value and mark items as gifts - US and international government regulations prohibit such actions.Thank you for your understanding.

Technics EPA-100 Tonearm Titanium Nitride. Good Continuity Bearings Need Reset. The beading’s seem move free and have no play but seem a little misaligned The armrest was broken and I glued it back on Sold as is.

Batteriepack Batterie Technics Vorstufe 9,6V Ni-Cd SU-C1000 SU-C1010 Hiermiet verkaufe ich einen neuen Batteriepack vorgesehen für Vorstufen von Technics. ER findet seine Anwendung in: SU-C1000SU-C1000mk2SU-C1010. Batteriepack ist neu mit org. Stecker. Ni-Cd wie im Original kein Li-Mh.

Original Technics EPA-B500 EPA-100MK2 Phono Cord Cable gold plated in excellent condition.

Technics EPA-100 Tonearm Titanium Nitride. Good Continuity Bearings Need Reset. The beading’s seem move free and have no play but seem a little misaligned The armrest was broken and I glued it back on Sold as is.