TECHNICS EPA-100 TONE ARM PARTS REPAIR CHEAP LOOK !!!. TECHNICS EPA-100 TONEARM HEAD SHELL PARTS REPAIR CHEAP LOOK !! Up for auction is a TECHNICS EPA-100 tonearm. this comes from a audiophiles jobsite. there are some scuff marks on the arm itself. also wires are not soldered to the pins on the plug. please see the pics. it comes as you see it. looks complete. its sold as is parts repair. i do not know know much about these arms but please ask any questions if you like. thank you. Terms of Sale Please note that this tonearm is sold as is parts repair and there are no returns. thank you. Shipping Information Please give me a couple days to package up and ship. thank you. Thanks for looking!

High-end technics EPA-110 tonearm that mounts on SL-110, SL-1100 .See photos.Shipping costs may be higher or lower. Depending on the country of delivery. Ask for a price!!

TECHNICS EPA-100 TONE ARM PARTS REPAIR CHEAP LOOK !!!. TECHNICS EPA-100 TONEARM HEAD SHELL PARTS REPAIR CHEAP LOOK !! Up for auction is a TECHNICS EPA-100 tonearm. this comes from a audiophiles jobsite. there are some scuff marks on the arm itself. also wires are not soldered to the pins on the plug. please see the pics. it comes as you see it. looks complete. its sold as is parts repair. i do not know know much about these arms but please ask any questions if you like. thank you. Terms of Sale Please note that this tonearm is sold as is parts repair and there are no returns. thank you. Shipping Information Please give me a couple days to package up and ship. thank you. Thanks for looking!

Batteriepack Batterie Technics Vorstufe 9,6V Ni-Cd SU-C1000 SU-C1010 Hiermiet verkaufe ich einen neuen Batteriepack vorgesehen für Vorstufen von Technics. ER findet seine Anwendung in: SU-C1000SU-C1000mk2SU-C1010. Batteriepack ist neu mit org. Stecker. Ni-Cd wie im Original kein Li-Mh.

Technics EPA-100 Dynamic Damping Universal Tone Arm Pickup Arm Vintage AudioDescriptionThe universal tone arm was developed to address the major issue of low-frequency resonance damping in pickup systems. The variable dynamic damping mechanism is capable of properly damping low-frequency resonances of both high and low compliance types, bringing out the full potential of the cartridge. The main weight is split and supported by a spring on one side, and floats on the other side by the attractive force between two magnets placed opposite each other at the rear of the weight and the damping selector. The resonance of the weight is damped by viscous silicon oil and a damping cylinder, effectively damping the resonance of the entire pickup system and successfully reducing resonance to less than half that of conventional systems. The resonance frequency of the main weight can be adjusted with the damping selector at the rear of the main weight according to the cartridge compliance, and the amount of braking can be set to an appropriate value. The arm pipe, 9.5 mm in outer diameter and 0.5 mm thick, is made of titanium nitride pipe arm, which is made of lightweight and mechanically strong titanium and further hardened with nitrogen, to achieve 1.6 times mechanical strength and high internal loss while reducing weight by 85% compared to conventional aluminum pipe. The tone arms support structure is made of titanium nitride pipe. Both the horizontal and vertical rotation sections of the tone arm are supported by a gimbal suspension system that uses bearings with high-precision pivot bearings manufactured in-house. The horizontal and vertical rotation axes intersect at a single point, minimizing differences in initial sensitivity and sensitivity in all rotation directions. Rubies, whose coefficient of friction is about 1/3 that of steel, are super-finished into balls with a sphericity of ±0.5?, and 20 rubies are used.Combined with the gimbal suspension system, it achieves a high initial sensitivity of 5mg. Type Braking variable dynamic damping systemUniversal tone armEffective bearing distance 30mm both horizontally and verticallyArm pipe High-strength titanium pipe with special nitriding treatmentArm effective length 250mmArm overall length range 322mm?350mmArm rear length range 66mm - 94mmArm height adjustment mechanism 45mm - 90mm (helicoid part 6mm)Overhang 15mmHorizontal tracking error angle +1.1°(inside of 30cm record)+2.1°(30cm record circumference)Rotation axis sensitivity: Horizontal, vertical, initial sensitivity 5mgArm effective weight 22g (cartridge dead weight 6.5g, needle pressure 1.25g)Arm resonance frequency 9.8Hz(Compliance: 12x10-6cm/dyneCartridge dead weight: 6.5g, needle pressure: 1.25g)Arm resonance sharpness (Q) 6dB or less (at optimum adjustment)Needle pressure adjustment range 0 to 3gShell weight 9.5gCartridge mounting dimensions JIS standard 12.7mm (1/2) mounting distanceShell terminal lug 1.2mm?, lug for 4-pin terminalApplicable cartridge weight 5g-10gArm mounting hole diameter 38mm?Optional: SH-100G1 balance weight for EPA-100 ($20,000)Type Variable dynamic damping typeArm effective weight 25.5g (with cartridge dead weight 9.5g and needle pressure 1.25g)Arm resonance frequency 9.1Hz(Compliance: 12x10-6cm/dyneCartridge dead weight: 9.5g, needle pressure: 1.25g)Resonance sharpness (Q) 6dB (at optimum adjustment)Dimensions 66mm - 94mm (from horizontal rotation axis to highest part of weight) Shipping FedEx?or DHLInternational Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

Here is a very nice Technics SH-100S headshell for their EPA-100 (and others) arm!! Actually, this will fit any S or J arm with the standard bayonet mount!! In great shape with just a few insignificant marks on the underside and in the slots from mounting hardware. Complete with the calibration scale and leads!! Shipping within the USA is $9.00 via USPS Priority Mail. Elsewhere via USPS Priority Mail International Small Flat Rate Box. Customs duties and taxes are the responsibility of the buyer so please be aware of these costs before buying. No returns for buyers remorse please.

High-end technics EPA-110 tonearm that mounts on SL-110, SL-1100 .See photos.Shipping costs may be higher or lower. Depending on the country of delivery. Ask for a price!!

Technics headshell for phono cartridge EPA 100 tonearm turntable

This was part of my departed, friends estate. Rare, high quality headshell with adjustment scale and litz wiring.

Here is a very nice Technics SH-100S headshell for their EPA-100 (and others) arm!! Actually, this will fit any S or J arm with the standard bayonet mount!! In great shape with just a few insignificant marks on the underside and in the slots from mounting hardware. Complete with the calibration scale and leads!! Shipping within the USA is $9.00 via USPS Priority Mail. Elsewhere via USPS Priority Mail International Small Flat Rate Box. Customs duties and taxes are the responsibility of the buyer so please be aware of these costs before buying. No returns for buyers remorse please.

TECHNICS EPA-100 TONE ARM PARTS REPAIR CHEAP LOOK !!!. TECHNICS EPA-100 TONEARM HEAD SHELL PARTS REPAIR CHEAP LOOK !! Up for auction is a TECHNICS EPA-100 tonearm. this comes from a audiophiles jobsite. there are some scuff marks on the arm itself. also wires are not soldered to the pins on the plug. please see the pics. it comes as you see it. looks complete. its sold as is parts repair. i do not know know much about these arms but please ask any questions if you like. thank you. Terms of Sale Please note that this tonearm is sold as is parts repair and there are no returns. thank you. Shipping Information Please give me a couple days to package up and ship. thank you. Thanks for looking!

Batteriepack Batterie Technics Vorstufe 9,6V Ni-Cd SU-C1000 SU-C1010 Hiermiet verkaufe ich einen neuen Batteriepack vorgesehen für Vorstufen von Technics. ER findet seine Anwendung in: SU-C1000SU-C1000mk2SU-C1010. Batteriepack ist neu mit org. Stecker. Ni-Cd wie im Original kein Li-Mh.

shipping policyCondition DescriptionTechnics EPA-100 Tone Arm Rare Item Please check the pictures carefully before bidding. shipping shipping from Japan. We will ship via Fedex, DHL, or Japan Post. Import duties are to be borne by the customer. Shipping is free of charge, however, we will charge an additional fee for high shipping cost areas. Policy PaymentYou can use various payment methods based on eBay Managed Payments. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.Cancellations & ReturnsCancellation or returns will be accepted only if the item has an obvious problem that was not mentioned in the listing description. If that, please let us know within 3 days you got the item. Buyer is responsible for shipping costs and any charge incurred shipping products back.International BuyersImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

TECHNICS SU-7100K HiFi Stereo Amplifier, Integrated amplifier, Parts or Repair. See pictures for the exact cosmetic condition of the amplifier. Has been tested and does not work properly. The left channel does produce sound but the right is not working. The right channel does produce the sound of scratchy pots. The power cable has been cut off by a previous owner. Sold as is for parts or repair.

Here is a very nice Technics SH-100S headshell for their EPA-100 (and others) arm!! Actually, this will fit any S or J arm with the standard bayonet mount!! In great shape with just a few insignificant marks on the underside and in the slots from mounting hardware. Complete with the calibration scale and leads!! Shipping within the USA is $9.00 via USPS Priority Mail. Elsewhere via USPS Priority Mail International Small Flat Rate Box. Customs duties and taxes are the responsibility of the buyer so please be aware of these costs before buying. No returns for buyers remorse please.

Technics SL-PD1000 5 Compact Disc Cambia Lettore - Hi-Fi SeparareQuesto foglio informativo sul prodotto è stato originariamente stilato in lingua inglese. Si prega di consultare appresso una traduzione automatica dello stesso in lingua italiani. Per ogni domanda, si invita cortesemente a contattarci.In ottime condizioni di lavoro testate Non include il telecomando Si prega di notare che larticolo potrebbe presentare piccoli segni/graffi, ciò è dovuto alletà/conservazione/utilizzo dellarticolo nel tempo. Le fotografie allegate si riferiscono alloggetto reale che sto vendendo. Cerco di fotografare i miei articoli al meglio delle mie capacità, per mostrare le condizioni reali. Potrebbero essere presenti piccoli graffi e segni di utilizzo, quindi ispezionare attentamente le fotografie prima dellacquisto. Stai acquistando di seconda mano, se gli accessori non sono mostrati nelle foto dellelenco, non dare per scontato che siano inclusi. Se avete domande o avete bisogno di ulteriori informazioni contattatemi. Le merci spedite verranno inviate tramite corriere, completamente assicurate e potrebbero richiedere una firma al momento della consegna. Se acquisti un articolo indicato come ritiro di persona, il pagamento deve essere effettuato per intero prima che possa essere organizzato il ritiro. Si prega di mettersi in contatto per organizzare il ritiro. In caso di problemi nel ricevere larticolo che hai acquistato da me, contattaci e farò del mio meglio per risolvere la situazione.Si prega di notare che larticolo potrebbe presentare piccoli segni/graffi, ciò è dovuto alletà/conservazione/utilizzo dellarticolo nel tempo. Le fotografie allegate si riferiscono alloggetto reale che sto vendendo. Cerco di fotografare i miei articoli al meglio delle mie capacità, per mostrare le condizioni reali. Potrebbero essere presenti piccoli graffi e segni di utilizzo, quindi ispezionare attentamente le fotografie prima dellacquisto. Le merci spedite verranno inviate tramite corriere, completamente assicurate e potrebbero richiedere una firma al momento della consegna. Se acquisti un articolo indicato come ritiro di persona, il pagamento deve essere effettuato per intero prima che possa essere organizzato il ritiro. Si prega di mettersi in contatto per organizzare il ritiro. Manufacture Technics SKU WC040802 CD Changer Capacity 5 Features Hi-Fi EAN Does not apply MPN SL-PD1000 Brand Technics Model Number SL-PD1000 Playable Media Format CD Model SL-PD1000 Type cd player disc changer

Condition DescriptionNo noticeable scratches are seen and it is in a beautiful state with gloss. The genuine shell is also glossy and good. The cable has a slight fray on the cloth coating, No major damage is seen. Considering the aging, we judge it as a beautiful item. We have confirmed the operation with our equipment. ? Output from both channels ? Lifter descent speed (oil replenished) ? Each adjustment point, operation feeling ? Height adjustment, etc. There is no problem in operation. accessories ·weight ? Weight fixing screw ? Mounting nut / washer ? Head shell (Technics) ? PHONO cable ? Instruction manual (copy) ? Mounting gauge ? Bundled Items All you can see on the picture will be included in a set of a package. Please refer to the pictures for more details. Please check the pictures and dont hesitate to ask any questions about the item. Please Note shipping from Japan. Policy PaymentWe can shipping only registered address on ebay. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.ShippingI send a product by International Priority(FedEx or UPS) or EMS(Japan Post) . I will determine the required shipping company depending on the situation. I attach the tracking number. Please bid it without worrying. Shipping is only available to the address registered in eBay. Please note that any address not registered in eBay is not acceptable to ship. Shipping is available from Monday to Friday. Weekends are not available because post office is closed.Terms of SaleImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to Unconditional Return Policy Customer service and satisfaction are very important to us. I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition. All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.International BuyersImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

Batteriepack Batterie Technics Vorstufe 9,6V Ni-Cd SU-C1000 SU-C1010 Hiermiet verkaufe ich einen neuen Batteriepack vorgesehen für Vorstufen von Technics. ER findet seine Anwendung in: SU-C1000SU-C1000mk2SU-C1010. Batteriepack ist neu mit org. Stecker. Ni-Cd wie im Original kein Li-Mh.

HI AND WELCOME TO MY SALE FOR THESE SET OF SPEAKERS WHICH ARE BEING SOLD FOR SPARES OR REPAIR. BOTH PLAY AUDIO BUT THE FOAM SURROUNDS ARE DONE DUE TO AGE, A VERY RARE SPEAKER SO SURE THEY ARE WORK TIME TO FIX, THESE ARE AROUND 4.3KG EACH AS THEY ARE FULL METAL HOUSINGS. ANYTHING ELSE PLEASE ASK. POSTAGE.DELIVERY IS FOR UK MAINLAND ONLY, CONTACT ME FOR OTHER LOCATIONS. SPARES OR REPAIR ITEM.I GET FAR TOO MUCH STUFF TO MESS AND DONT ATTEMPT REPAIRS, ALL ITEMS WORKING OR NOT ARE SOLD JUST AS I SEE THEM, BUT PLEASE NOTE WITH SPARES OR REPAIR LOTS THEY CANT BE FULLY TESTED SO THESE MAY HAVE OTHER ISSUES NOT PICKED UP BY ME IN MY LIMITED TIME WITH THE ITEM. NO RETURNS WITH FAULTY ITEMS, SOLD AS SEEN TO THE BEST OF MY KNOWLEDGE, NOTHING IS HIDDEN WITH MY ADVERTS WHICH IS WHY I ALSO USE 12 GOOD QUALITY PICTURES, CHECK MY FEEDBACK FOR PEACE OF MIND.

High-end technics EPA-110 tonearm that mounts on SL-110, SL-1100 .See photos.Shipping costs may be higher or lower. Depending on the country of delivery. Ask for a price!!

Technics EPA-100 Dynamic Damping Universal Tone Arm Pickup Arm Vintage Audio #4 Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed with the following contents. Output from both channels.Lifter descent speed (Oil refilled).Each adjustment point, operation feeling.Height adjustment, etc. Polished and cleaned for each part.The appearance is a beautiful product without any noticeable scratches. Please refer to the photo. Overview The universal tone arm was developed to address the major issue of low-frequency resonance damping in pickup systems. The variable dynamic damping mechanism is capable of properly damping low-frequency resonances of both high and low compliance types, bringing out the full potential of the cartridge. The main weight is split and supported by a spring on one side, and floats on the other side by the attractive force between two magnets placed opposite each other at the rear of the weight and the damping selector. The resonance of the weight is damped by viscous silicon oil and a damping cylinder, effectively damping the resonance of the entire pickup system and successfully reducing resonance to less than half that of conventional systems. The resonance frequency of the main weight can be adjusted with the damping selector at the rear of the main weight according to the cartridge compliance, and the amount of braking can be set to an appropriate value. The arm pipe, 9.5 mm in outer diameter and 0.5 mm thick, is made of titanium nitride pipe arm, which is made of lightweight and mechanically strong titanium that has been further hardened by nitrogen. The tone arms support structure is made of titanium nitride pipe. Both the horizontal and vertical rotation sections of the tone arm are supported by a gimbal suspension system that uses bearings with high-precision pivot bearings manufactured in-house. The horizontal and vertical rotation axes intersect at a single point, minimizing differences in initial sensitivity and sensitivity in all rotation directions. Rubies, whose coefficient of friction is about 1/3 that of steel, are super-finished into balls with a sphericity of ±0.5?m, and 20 rubies are used.Combined with the gimbal suspension system, it achieves a high initial sensitivity of 5mg. Specifications Type: Universal tone arm with variable dynamic dampingEffective bearing clearance: 30mm both horizontally and verticallyArm pipe: Boron Titanium pipeArm effective length: 250mmArm length range: 322mm to 350mmArm rear length range: 66.5mm - 94.5mmArm height adjustment range: 44mm - 64mm (helicoid part 20mm)Overhang: 15mmHorizontal tracking error angle: +1°6(inner circumference of 30cm record), +2°6(outer circumference of 30cm record)Rotation axis sensitivity: Horizontal, vertical, initial sensitivity 5mgArm effective weight: 22g (cartridge dead weight 6.5g, needle pressure 1.25g)Arm resonance frequency: 9.8Hz, (Compliance: 12x10-6cm/dyne, cartridge weight 6.5g, needle pressure 1.25g)Arm resonance sharpness (Q): 6dB or less (at optimum adjustment)Needle pressure adjustment range: 0 to 3gShell weight: 9.5g (boron aluminum)Shell terminal lug: 1.2mm?, lug for 4-pin terminalApplicable cartridge weight: 5g to 10gArm mounting hole diameter: 62mm? Accessories WeightsWeight fixing screwHead shell (Technics)Lead wireMounting nut/washerPHONO cableInstruction Manual (copy)(Japanese)Installation gauge (copy) Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

Technics EPA-100 Braccio pickup universale con smorzamento dinamico Audio vintage n. 4 Domo Arigato! Benvenuto, grazie per la tua visita. Descrizione Operazione confermata con i seguenti contenuti. Uscita da entrambi i canali.Velocità di discesa del sollevatore (Rifornimento olio).Ogni punto di regolazione, sensazione di funzionamento.Regolazione dellaltezza, ecc. Lucidato e pulito in ogni sua parte.Laspetto è un bellissimo prodotto senza graffi evidenti. Si prega di fare riferimento alla foto. Panoramica Il braccio universale è stato sviluppato per risolvere il problema principale dello smorzamento della risonanza a bassa frequenza nei sistemi di pickup. Il meccanismo di smorzamento dinamico variabile è in grado di smorzare adeguatamente le risonanze a bassa frequenza sia di tipo ad alta che a bassa compliance, esaltando tutto il potenziale della cartuccia. Il peso principale è diviso e supportato da una molla su un lato, e galleggia sullaltro lato grazie alla forza di attrazione tra due magneti posizionati uno di fronte allaltro nella parte posteriore del peso e del selettore di smorzamento. La risonanza del peso viene smorzata da olio siliconico viscoso e da un cilindro di smorzamento, smorzando efficacemente la risonanza dellintero sistema di pickup e riducendo con successo la risonanza a meno della metà rispetto ai sistemi convenzionali. La frequenza di risonanza del peso principale può essere regolata con il selettore di smorzamento sul retro del peso principale in base alla conformità della cartuccia, e la quantità di frenata può essere impostata su un valore appropriato. Il tubo del braccio, con diametro esterno di 9,5 mm e spessore di 0,5 mm, è realizzato con un braccio in nitruro di titanio, realizzato in titanio leggero e meccanicamente resistente, ulteriormente indurito dallazoto. La struttura di supporto del braccio è realizzata in tubo di nitruro di titanio. Sia la sezione di rotazione orizzontale che quella verticale del braccio sono supportate da un sistema di sospensione cardanica che utilizza cuscinetti con cuscinetti girevoli ad alta precisione prodotti internamente. Gli assi di rotazione orizzontale e verticale si intersecano in un unico punto, riducendo al minimo le differenze nella sensibilità iniziale e nella sensibilità in tutte le direzioni di rotazione. I rubini, il cui coefficiente di attrito è circa 1/3 di quello dellacciaio, vengono superfiniti in sfere con una sfericità di ±0,5?m e vengono utilizzati 20 rubini.In combinazione con il sistema di sospensione cardanica, raggiunge unelevata sensibilità iniziale di 5 mg. Specifiche Tipo: braccio universale con smorzamento dinamico variabileGioco effettivo dei cuscinetti: 30 mm sia in orizzontale che in verticaleTubo del braccio: tubo al boro titanioLunghezza effettiva del braccio: 250 mmIntervallo di lunghezza del braccio: da 322 mm a 350 mmIntervallo di lunghezza posteriore del braccio: 66,5 mm - 94,5 mmIntervallo di regolazione dellaltezza del braccio: 44 mm - 64 mm (parte elicoidale 20 mm)Sporgenza: 15 mmAngolo di errore di tracciamento orizzontale: +1°6(circonferenza interna del record da 30 cm), +2°6(circonferenza esterna del record da 30 cm)Sensibilità dellasse di rotazione: sensibilità orizzontale, verticale, iniziale 5 mgPeso effettivo del braccio: 22 g (peso morto della cartuccia 6,5 g, pressione dellago 1,25 g)Frequenza di risonanza del braccio: 9,8 Hz, (Conformità: 12x10-6 cm/dyne, peso cartuccia 6,5 g, pressione ago 1,25 g)Nitidezza della risonanza del braccio (Q): 6 dB o meno (con regolazione ottimale)Intervallo di regolazione della pressione dellago: da 0 a 3 gPeso del guscio: 9,5 g (alluminio boro)Capocorda terminale a guscio: 1,2 mm?, capocorda per terminale a 4 pinPeso della cartuccia applicabile: da 5 g a 10 gDiametro del foro di montaggio del braccio: 62 mm? Accessori PesiVite di fissaggio del pesoGuscio della testa (Tecnica)Cavo principaleDado/rondella di montaggioCavo FONOManuale di istruzioni (copia)(giapponese)Calibro di installazione (copia) Spedizione La spedizione è disponibile solo per lindirizzo registrato su eBay. La spedizione è entro Fedex O SME. Spedizione gratuita ritorna Politica di restituzione incondizionata Il servizio e la soddisfazione del cliente sono molto importanti per noi.Ho una politica di restituzione incondizionata se notificata entro 30 giorni dalla ricezione dellarticolo. Tutti gli articoli restituiti devono essere nella condizione originale.Tutte le richieste di reso devono essere effettuate entro 30 giorni dal ricevimento dellarticolo. Per favore contattami prima per il reso prima di rispedirmelo.Le spese di spedizione della merce restituita sono a carico dellacquirente. Acquirenti internazionali Notare che:I dazi doganali, le tasse e le spese non sono inclusi nel prezzo dellarticolo o nelle spese di spedizione.Queste spese sono a carico dellacquirente.Si prega di verificare con lufficio doganale del proprio paese per determinare quali saranno questi costi aggiuntivi prima dellofferta/acquisto.Queste spese vengono normalmente riscosse dalla società di spedizione (spedizione) o al momento del ritiro dellarticolo: non confonderle con spese di spedizione aggiuntive.Non contrassegniamo i valori della merce al di sotto del valore né contrassegniamo gli articoli come regali: le normative governative statunitensi e internazionali vietano tale comportamento. Mi dispiace, ma non possiamo organizzarlo perché è illegale in Giappone.Grazie.

Technics EPA-100 Dynamic Damping Universal Tone Arm Pickup Arm Vintage Audio #4 Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed with the following contents. Output from both channels.Lifter descent speed (Oil refilled).Each adjustment point, operation feeling.Height adjustment, etc. Polished and cleaned for each part.The appearance is a beautiful product without any noticeable scratches. Please refer to the photo. Overview The universal tone arm was developed to address the major issue of low-frequency resonance damping in pickup systems. The variable dynamic damping mechanism is capable of properly damping low-frequency resonances of both high and low compliance types, bringing out the full potential of the cartridge. The main weight is split and supported by a spring on one side, and floats on the other side by the attractive force between two magnets placed opposite each other at the rear of the weight and the damping selector. The resonance of the weight is damped by viscous silicon oil and a damping cylinder, effectively damping the resonance of the entire pickup system and successfully reducing resonance to less than half that of conventional systems. The resonance frequency of the main weight can be adjusted with the damping selector at the rear of the main weight according to the cartridge compliance, and the amount of braking can be set to an appropriate value. The arm pipe, 9.5 mm in outer diameter and 0.5 mm thick, is made of titanium nitride pipe arm, which is made of lightweight and mechanically strong titanium that has been further hardened by nitrogen. The tone arms support structure is made of titanium nitride pipe. Both the horizontal and vertical rotation sections of the tone arm are supported by a gimbal suspension system that uses bearings with high-precision pivot bearings manufactured in-house. The horizontal and vertical rotation axes intersect at a single point, minimizing differences in initial sensitivity and sensitivity in all rotation directions. Rubies, whose coefficient of friction is about 1/3 that of steel, are super-finished into balls with a sphericity of ±0.5?m, and 20 rubies are used.Combined with the gimbal suspension system, it achieves a high initial sensitivity of 5mg. Specifications Type: Universal tone arm with variable dynamic dampingEffective bearing clearance: 30mm both horizontally and verticallyArm pipe: Boron Titanium pipeArm effective length: 250mmArm length range: 322mm to 350mmArm rear length range: 66.5mm - 94.5mmArm height adjustment range: 44mm - 64mm (helicoid part 20mm)Overhang: 15mmHorizontal tracking error angle: +1°6(inner circumference of 30cm record), +2°6(outer circumference of 30cm record)Rotation axis sensitivity: Horizontal, vertical, initial sensitivity 5mgArm effective weight: 22g (cartridge dead weight 6.5g, needle pressure 1.25g)Arm resonance frequency: 9.8Hz, (Compliance: 12x10-6cm/dyne, cartridge weight 6.5g, needle pressure 1.25g)Arm resonance sharpness (Q): 6dB or less (at optimum adjustment)Needle pressure adjustment range: 0 to 3gShell weight: 9.5g (boron aluminum)Shell terminal lug: 1.2mm?, lug for 4-pin terminalApplicable cartridge weight: 5g to 10gArm mounting hole diameter: 62mm? Accessories WeightsWeight fixing screwHead shell (Technics)Lead wireMounting nut/washerPHONO cableInstruction Manual (copy)(Japanese)Installation gauge (copy) Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

SOLD AS SPARES OR REPAIRS ONLY - The power amp lights up in standby, but when you press the power button it clicks and nothing happens. So untested any further and no connecting cables for the pre-amp - may be other faults as item is not powering up to fully test it so sold as 99p auction spares repairs no returns or bad feedback please.