TECHNICS EPA-100 TONE ARM PARTS REPAIR CHEAP LOOK !!!. TECHNICS EPA-100 TONEARM HEAD SHELL PARTS REPAIR CHEAP LOOK !! Up for auction is a TECHNICS EPA-100 tonearm. this comes from a audiophiles jobsite. there are some scuff marks on the arm itself. also wires are not soldered to the pins on the plug. please see the pics. it comes as you see it. looks complete. its sold as is parts repair. i do not know know much about these arms but please ask any questions if you like. thank you. Terms of Sale Please note that this tonearm is sold as is parts repair and there are no returns. thank you. Shipping Information Please give me a couple days to package up and ship. thank you. Thanks for looking!

Technics Stereo Receiver comes with TEAC Equalizer model EQA-10 in good working condition. Sold together or separately.

Technics EPA-100 Dynamic Damping Universal Tone Arm Pickup Arm Vintage AudioDescriptionThe universal tone arm was developed to address the major issue of low-frequency resonance damping in pickup systems. The variable dynamic damping mechanism is capable of properly damping low-frequency resonances of both high and low compliance types, bringing out the full potential of the cartridge. The main weight is split and supported by a spring on one side, and floats on the other side by the attractive force between two magnets placed opposite each other at the rear of the weight and the damping selector. The resonance of the weight is damped by viscous silicon oil and a damping cylinder, effectively damping the resonance of the entire pickup system and successfully reducing resonance to less than half that of conventional systems. The resonance frequency of the main weight can be adjusted with the damping selector at the rear of the main weight according to the cartridge compliance, and the amount of braking can be set to an appropriate value. The arm pipe, 9.5 mm in outer diameter and 0.5 mm thick, is made of titanium nitride pipe arm, which is made of lightweight and mechanically strong titanium and further hardened with nitrogen, to achieve 1.6 times mechanical strength and high internal loss while reducing weight by 85% compared to conventional aluminum pipe. The tone arms support structure is made of titanium nitride pipe. Both the horizontal and vertical rotation sections of the tone arm are supported by a gimbal suspension system that uses bearings with high-precision pivot bearings manufactured in-house. The horizontal and vertical rotation axes intersect at a single point, minimizing differences in initial sensitivity and sensitivity in all rotation directions. Rubies, whose coefficient of friction is about 1/3 that of steel, are super-finished into balls with a sphericity of ±0.5?, and 20 rubies are used.Combined with the gimbal suspension system, it achieves a high initial sensitivity of 5mg. Type Braking variable dynamic damping systemUniversal tone armEffective bearing distance 30mm both horizontally and verticallyArm pipe High-strength titanium pipe with special nitriding treatmentArm effective length 250mmArm overall length range 322mm?350mmArm rear length range 66mm - 94mmArm height adjustment mechanism 45mm - 90mm (helicoid part 6mm)Overhang 15mmHorizontal tracking error angle +1.1°(inside of 30cm record)+2.1°(30cm record circumference)Rotation axis sensitivity: Horizontal, vertical, initial sensitivity 5mgArm effective weight 22g (cartridge dead weight 6.5g, needle pressure 1.25g)Arm resonance frequency 9.8Hz(Compliance: 12x10-6cm/dyneCartridge dead weight: 6.5g, needle pressure: 1.25g)Arm resonance sharpness (Q) 6dB or less (at optimum adjustment)Needle pressure adjustment range 0 to 3gShell weight 9.5gCartridge mounting dimensions JIS standard 12.7mm (1/2) mounting distanceShell terminal lug 1.2mm?, lug for 4-pin terminalApplicable cartridge weight 5g-10gArm mounting hole diameter 38mm?Optional: SH-100G1 balance weight for EPA-100 ($20,000)Type Variable dynamic damping typeArm effective weight 25.5g (with cartridge dead weight 9.5g and needle pressure 1.25g)Arm resonance frequency 9.1Hz(Compliance: 12x10-6cm/dyneCartridge dead weight: 9.5g, needle pressure: 1.25g)Resonance sharpness (Q) 6dB (at optimum adjustment)Dimensions 66mm - 94mm (from horizontal rotation axis to highest part of weight) Shipping FedEx?or DHLInternational Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

This Technics DVD A-10 DVD Audio/DVD Video Player is a fantastic addition to any home entertainment system. With the ability to play DVD and DVD Video formats, you can enjoy your favorite movies and TV shows with ease. The Gold color and sleek design add a stylish touch to your setup. The player is from an open box, allowing you to save money and still get a like-new product. It's a perfect fit for those in search of a high-quality DVD player. The model, Technics A10, is well-known for its reliability and outstanding performance. Get ready to upgrade your home entertainment experience with this amazing player. R33/B

Here is a very nice Technics SH-100S headshell for their EPA-100 (and others) arm!! Actually, this will fit any S or J arm with the standard bayonet mount!! In great shape with just a few insignificant marks on the underside and in the slots from mounting hardware. Complete with the calibration scale and leads!! Shipping within the USA is $9.00 via USPS Priority Mail. Elsewhere via USPS Priority Mail International Small Flat Rate Box. Customs duties and taxes are the responsibility of the buyer so please be aware of these costs before buying. No returns for buyers remorse please.

Here is a very nice Technics SH-100S headshell for their EPA-100 (and others) arm!! Actually, this will fit any S or J arm with the standard bayonet mount!! In great shape with just a few insignificant marks on the underside and in the slots from mounting hardware. Complete with the calibration scale and leads!! Shipping within the USA is $9.00 via USPS Priority Mail. Elsewhere via USPS Priority Mail International Small Flat Rate Box. Customs duties and taxes are the responsibility of the buyer so please be aware of these costs before buying. No returns for buyers remorse please.

TECHNICS EPA-100 TONE ARM PARTS REPAIR CHEAP LOOK !!!. TECHNICS EPA-100 TONEARM HEAD SHELL PARTS REPAIR CHEAP LOOK !! Up for auction is a TECHNICS EPA-100 tonearm. this comes from a audiophiles jobsite. there are some scuff marks on the arm itself. also wires are not soldered to the pins on the plug. please see the pics. it comes as you see it. looks complete. its sold as is parts repair. i do not know know much about these arms but please ask any questions if you like. thank you. Terms of Sale Please note that this tonearm is sold as is parts repair and there are no returns. thank you. Shipping Information Please give me a couple days to package up and ship. thank you. Thanks for looking!

shipping policyCondition DescriptionTechnics EPA-100 Tone Arm Rare Item Please check the pictures carefully before bidding. shipping shipping from Japan. We will ship via Fedex, DHL, or Japan Post. Import duties are to be borne by the customer. Shipping is free of charge, however, we will charge an additional fee for high shipping cost areas. Policy PaymentYou can use various payment methods based on eBay Managed Payments. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.Cancellations & ReturnsCancellation or returns will be accepted only if the item has an obvious problem that was not mentioned in the listing description. If that, please let us know within 3 days you got the item. Buyer is responsible for shipping costs and any charge incurred shipping products back.International BuyersImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

Technics SU-MA-10.in Buone condizioni,leggeri segni sul frontale,per il normale uso,unico difetto rilevante sono due scritte del selettore che si sono cancellate,non sono presente (quelle dellingresso Phono e del CD) ,per il resto lamplificatore perfettamente funzionante, lamplificatore dispone di un ingresso phono MM-MC, pi un Dac incorporato,per altre caratteristiche vedere in rete.

Here is a very nice Technics SH-100S headshell for their EPA-100 (and others) arm!! Actually, this will fit any S or J arm with the standard bayonet mount!! In great shape with just a few insignificant marks on the underside and in the slots from mounting hardware. Complete with the calibration scale and leads!! Shipping within the USA is $9.00 via USPS Priority Mail. Elsewhere via USPS Priority Mail International Small Flat Rate Box. Customs duties and taxes are the responsibility of the buyer so please be aware of these costs before buying. No returns for buyers remorse please.

Condition DescriptionNo noticeable scratches are seen and it is in a beautiful state with gloss. The genuine shell is also glossy and good. The cable has a slight fray on the cloth coating, No major damage is seen. Considering the aging, we judge it as a beautiful item. We have confirmed the operation with our equipment. ? Output from both channels ? Lifter descent speed (oil replenished) ? Each adjustment point, operation feeling ? Height adjustment, etc. There is no problem in operation. accessories ·weight ? Weight fixing screw ? Mounting nut / washer ? Head shell (Technics) ? PHONO cable ? Instruction manual (copy) ? Mounting gauge ? Bundled Items All you can see on the picture will be included in a set of a package. Please refer to the pictures for more details. Please check the pictures and dont hesitate to ask any questions about the item. Please Note shipping from Japan. Policy PaymentWe can shipping only registered address on ebay. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.ShippingI send a product by International Priority(FedEx or UPS) or EMS(Japan Post) . I will determine the required shipping company depending on the situation. I attach the tracking number. Please bid it without worrying. Shipping is only available to the address registered in eBay. Please note that any address not registered in eBay is not acceptable to ship. Shipping is available from Monday to Friday. Weekends are not available because post office is closed.Terms of SaleImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to Unconditional Return Policy Customer service and satisfaction are very important to us. I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition. All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.International BuyersImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

listing many other similar items! >>>Visit StoreDescription Condition: Used Brand: Technics Technics EPA-101T tonearm Junk with Phono cable Phono cable, vanity case, with instruction manual, please refer to the image.No shell.Since it is a second-hand product, the cork upholstery on the plus arm mounting part has decayed and has been changed to rubber upholstery, and the cosmetic box and instruction manual are quite dirty.The thing of an image is all.Please check the posted image carefully before purchasing. Please check the picture for the condition of the product. Please refrain from nervous people and those who seek perfection.I am waiting for a question by a message?There may be an error in the Item specifics. ?Please give priority to photos and descriptions. Please read the full item description and contact us with any questions you may have prior to purchasing.Please let me know if there are any other products you want. Even if the condition is Unused, it has been handed to someone once, so we list it as a used item. Please purchase only if you understand the second hand product. The items we are selling are used in Japan. You may need a transformer for use in your country.Payment Please pay within 5 days after auction is finished.Shipping We ship to world wide for free by SAL(With tracking number). All items will be carefully packed and shipped to you directly from Japan.International Buyers - Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.Provided by HARU

Technics CA-1080/CA-1060 4 piece seperates HI FI, CD, Tuner, twin Cassette & Amp. Used, fully tested, fully working and in excellent condition ( age & usage related small surface scratches on the top of units) . All lights, buttons, system ribbons & connections are fully working., A replacement remote control & power cable are included. Sold & dispatched from the UK with Royal Mail tracked 24 delivery. No speakers, extra accessories, or other cables are included. I do have Quality speakers for sale, which could be discounted if bought with this system. Technics ST-CA1080 (ST-CA1080EGK) preamplifier/tuner/timerfm/mw/lw,Panasonic Pureism / AU, Elna, Tk components,DPL,mm 280x89x287, kg 1,8. Technics SE-CA1080 (SE-CA1080EGK) power amplifier2x60W@6?/20-20000Hz,1x Panasonic RSN3403 power(pack) ic,2x8200µF Panasonic Audio filter caps,Panasonic, Elna, Tk components,Technics RAK-CH729WH remote,mm 280x119x332, kg 5,9. Technics SL-CA1060 (SL-CA1060E-K) cd player2 dac 1bit MASH conversion,Panasonic MN6627IRA dac / filter,Panasonic transport / pickup,Panasonic CE / HFQ, Elna, Tk components,mm 280x89x267, kg 2,2. Technics RS-CA1060 (RS-CA1060E-K) cassette deck1 head (deck 1*; P: permalloy), 2 heads (deck 2°; R/P: permalloy; E: double-gap ferrite),1 DC servo motor (capstan drive)*°, 1 DC motor (reel table drive)*°, Dolby B-C NR,dual capstan *°, auto reverse,motorized tape loading,Panasonic CE, Elna, Tk components,No 30-15000 Hz (+0 -7 dB, din),CrO2 30-17000 Hz (+0 -7 dB, din), Me 30-19000 Hz (+0 -7 dB, din),S/N 56 dB (Dolby off), 66 dB (Dolby B), 74 dB (Dolby C),W&F < 0,1% (wrms),mm 280x119x265, kg 2,8.

Technics EPA-100 Dynamic Damping Universal Tone Arm Pickup Arm Vintage Audio #4 Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed with the following contents. Output from both channels.Lifter descent speed (Oil refilled).Each adjustment point, operation feeling.Height adjustment, etc. Polished and cleaned for each part.The appearance is a beautiful product without any noticeable scratches. Please refer to the photo. Overview The universal tone arm was developed to address the major issue of low-frequency resonance damping in pickup systems. The variable dynamic damping mechanism is capable of properly damping low-frequency resonances of both high and low compliance types, bringing out the full potential of the cartridge. The main weight is split and supported by a spring on one side, and floats on the other side by the attractive force between two magnets placed opposite each other at the rear of the weight and the damping selector. The resonance of the weight is damped by viscous silicon oil and a damping cylinder, effectively damping the resonance of the entire pickup system and successfully reducing resonance to less than half that of conventional systems. The resonance frequency of the main weight can be adjusted with the damping selector at the rear of the main weight according to the cartridge compliance, and the amount of braking can be set to an appropriate value. The arm pipe, 9.5 mm in outer diameter and 0.5 mm thick, is made of titanium nitride pipe arm, which is made of lightweight and mechanically strong titanium that has been further hardened by nitrogen. The tone arms support structure is made of titanium nitride pipe. Both the horizontal and vertical rotation sections of the tone arm are supported by a gimbal suspension system that uses bearings with high-precision pivot bearings manufactured in-house. The horizontal and vertical rotation axes intersect at a single point, minimizing differences in initial sensitivity and sensitivity in all rotation directions. Rubies, whose coefficient of friction is about 1/3 that of steel, are super-finished into balls with a sphericity of ±0.5?m, and 20 rubies are used.Combined with the gimbal suspension system, it achieves a high initial sensitivity of 5mg. Specifications Type: Universal tone arm with variable dynamic dampingEffective bearing clearance: 30mm both horizontally and verticallyArm pipe: Boron Titanium pipeArm effective length: 250mmArm length range: 322mm to 350mmArm rear length range: 66.5mm - 94.5mmArm height adjustment range: 44mm - 64mm (helicoid part 20mm)Overhang: 15mmHorizontal tracking error angle: +1°6(inner circumference of 30cm record), +2°6(outer circumference of 30cm record)Rotation axis sensitivity: Horizontal, vertical, initial sensitivity 5mgArm effective weight: 22g (cartridge dead weight 6.5g, needle pressure 1.25g)Arm resonance frequency: 9.8Hz, (Compliance: 12x10-6cm/dyne, cartridge weight 6.5g, needle pressure 1.25g)Arm resonance sharpness (Q): 6dB or less (at optimum adjustment)Needle pressure adjustment range: 0 to 3gShell weight: 9.5g (boron aluminum)Shell terminal lug: 1.2mm?, lug for 4-pin terminalApplicable cartridge weight: 5g to 10gArm mounting hole diameter: 62mm? Accessories WeightsWeight fixing screwHead shell (Technics)Lead wireMounting nut/washerPHONO cableInstruction Manual (copy)(Japanese)Installation gauge (copy) Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

Technics EPA-100 Braccio pickup universale con smorzamento dinamico Audio vintage n. 4 Domo Arigato! Benvenuto, grazie per la tua visita. Descrizione Operazione confermata con i seguenti contenuti. Uscita da entrambi i canali.Velocità di discesa del sollevatore (Rifornimento olio).Ogni punto di regolazione, sensazione di funzionamento.Regolazione dellaltezza, ecc. Lucidato e pulito in ogni sua parte.Laspetto è un bellissimo prodotto senza graffi evidenti. Si prega di fare riferimento alla foto. Panoramica Il braccio universale è stato sviluppato per risolvere il problema principale dello smorzamento della risonanza a bassa frequenza nei sistemi di pickup. Il meccanismo di smorzamento dinamico variabile è in grado di smorzare adeguatamente le risonanze a bassa frequenza sia di tipo ad alta che a bassa compliance, esaltando tutto il potenziale della cartuccia. Il peso principale è diviso e supportato da una molla su un lato, e galleggia sullaltro lato grazie alla forza di attrazione tra due magneti posizionati uno di fronte allaltro nella parte posteriore del peso e del selettore di smorzamento. La risonanza del peso viene smorzata da olio siliconico viscoso e da un cilindro di smorzamento, smorzando efficacemente la risonanza dellintero sistema di pickup e riducendo con successo la risonanza a meno della metà rispetto ai sistemi convenzionali. La frequenza di risonanza del peso principale può essere regolata con il selettore di smorzamento sul retro del peso principale in base alla conformità della cartuccia, e la quantità di frenata può essere impostata su un valore appropriato. Il tubo del braccio, con diametro esterno di 9,5 mm e spessore di 0,5 mm, è realizzato con un braccio in nitruro di titanio, realizzato in titanio leggero e meccanicamente resistente, ulteriormente indurito dallazoto. La struttura di supporto del braccio è realizzata in tubo di nitruro di titanio. Sia la sezione di rotazione orizzontale che quella verticale del braccio sono supportate da un sistema di sospensione cardanica che utilizza cuscinetti con cuscinetti girevoli ad alta precisione prodotti internamente. Gli assi di rotazione orizzontale e verticale si intersecano in un unico punto, riducendo al minimo le differenze nella sensibilità iniziale e nella sensibilità in tutte le direzioni di rotazione. I rubini, il cui coefficiente di attrito è circa 1/3 di quello dellacciaio, vengono superfiniti in sfere con una sfericità di ±0,5?m e vengono utilizzati 20 rubini.In combinazione con il sistema di sospensione cardanica, raggiunge unelevata sensibilità iniziale di 5 mg. Specifiche Tipo: braccio universale con smorzamento dinamico variabileGioco effettivo dei cuscinetti: 30 mm sia in orizzontale che in verticaleTubo del braccio: tubo al boro titanioLunghezza effettiva del braccio: 250 mmIntervallo di lunghezza del braccio: da 322 mm a 350 mmIntervallo di lunghezza posteriore del braccio: 66,5 mm - 94,5 mmIntervallo di regolazione dellaltezza del braccio: 44 mm - 64 mm (parte elicoidale 20 mm)Sporgenza: 15 mmAngolo di errore di tracciamento orizzontale: +1°6(circonferenza interna del record da 30 cm), +2°6(circonferenza esterna del record da 30 cm)Sensibilità dellasse di rotazione: sensibilità orizzontale, verticale, iniziale 5 mgPeso effettivo del braccio: 22 g (peso morto della cartuccia 6,5 g, pressione dellago 1,25 g)Frequenza di risonanza del braccio: 9,8 Hz, (Conformità: 12x10-6 cm/dyne, peso cartuccia 6,5 g, pressione ago 1,25 g)Nitidezza della risonanza del braccio (Q): 6 dB o meno (con regolazione ottimale)Intervallo di regolazione della pressione dellago: da 0 a 3 gPeso del guscio: 9,5 g (alluminio boro)Capocorda terminale a guscio: 1,2 mm?, capocorda per terminale a 4 pinPeso della cartuccia applicabile: da 5 g a 10 gDiametro del foro di montaggio del braccio: 62 mm? Accessori PesiVite di fissaggio del pesoGuscio della testa (Tecnica)Cavo principaleDado/rondella di montaggioCavo FONOManuale di istruzioni (copia)(giapponese)Calibro di installazione (copia) Spedizione La spedizione è disponibile solo per lindirizzo registrato su eBay. La spedizione è entro Fedex O SME. Spedizione gratuita ritorna Politica di restituzione incondizionata Il servizio e la soddisfazione del cliente sono molto importanti per noi.Ho una politica di restituzione incondizionata se notificata entro 30 giorni dalla ricezione dellarticolo. Tutti gli articoli restituiti devono essere nella condizione originale.Tutte le richieste di reso devono essere effettuate entro 30 giorni dal ricevimento dellarticolo. Per favore contattami prima per il reso prima di rispedirmelo.Le spese di spedizione della merce restituita sono a carico dellacquirente. Acquirenti internazionali Notare che:I dazi doganali, le tasse e le spese non sono inclusi nel prezzo dellarticolo o nelle spese di spedizione.Queste spese sono a carico dellacquirente.Si prega di verificare con lufficio doganale del proprio paese per determinare quali saranno questi costi aggiuntivi prima dellofferta/acquisto.Queste spese vengono normalmente riscosse dalla società di spedizione (spedizione) o al momento del ritiro dellarticolo: non confonderle con spese di spedizione aggiuntive.Non contrassegniamo i valori della merce al di sotto del valore né contrassegniamo gli articoli come regali: le normative governative statunitensi e internazionali vietano tale comportamento. Mi dispiace, ma non possiamo organizzarlo perché è illegale in Giappone.Grazie.

Technics EPA-100 Dynamic Damping Universal Tone Arm Pickup Arm Vintage Audio #4 Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed with the following contents. Output from both channels.Lifter descent speed (Oil refilled).Each adjustment point, operation feeling.Height adjustment, etc. Polished and cleaned for each part.The appearance is a beautiful product without any noticeable scratches. Please refer to the photo. Overview The universal tone arm was developed to address the major issue of low-frequency resonance damping in pickup systems. The variable dynamic damping mechanism is capable of properly damping low-frequency resonances of both high and low compliance types, bringing out the full potential of the cartridge. The main weight is split and supported by a spring on one side, and floats on the other side by the attractive force between two magnets placed opposite each other at the rear of the weight and the damping selector. The resonance of the weight is damped by viscous silicon oil and a damping cylinder, effectively damping the resonance of the entire pickup system and successfully reducing resonance to less than half that of conventional systems. The resonance frequency of the main weight can be adjusted with the damping selector at the rear of the main weight according to the cartridge compliance, and the amount of braking can be set to an appropriate value. The arm pipe, 9.5 mm in outer diameter and 0.5 mm thick, is made of titanium nitride pipe arm, which is made of lightweight and mechanically strong titanium that has been further hardened by nitrogen. The tone arms support structure is made of titanium nitride pipe. Both the horizontal and vertical rotation sections of the tone arm are supported by a gimbal suspension system that uses bearings with high-precision pivot bearings manufactured in-house. The horizontal and vertical rotation axes intersect at a single point, minimizing differences in initial sensitivity and sensitivity in all rotation directions. Rubies, whose coefficient of friction is about 1/3 that of steel, are super-finished into balls with a sphericity of ±0.5?m, and 20 rubies are used.Combined with the gimbal suspension system, it achieves a high initial sensitivity of 5mg. Specifications Type: Universal tone arm with variable dynamic dampingEffective bearing clearance: 30mm both horizontally and verticallyArm pipe: Boron Titanium pipeArm effective length: 250mmArm length range: 322mm to 350mmArm rear length range: 66.5mm - 94.5mmArm height adjustment range: 44mm - 64mm (helicoid part 20mm)Overhang: 15mmHorizontal tracking error angle: +1°6(inner circumference of 30cm record), +2°6(outer circumference of 30cm record)Rotation axis sensitivity: Horizontal, vertical, initial sensitivity 5mgArm effective weight: 22g (cartridge dead weight 6.5g, needle pressure 1.25g)Arm resonance frequency: 9.8Hz, (Compliance: 12x10-6cm/dyne, cartridge weight 6.5g, needle pressure 1.25g)Arm resonance sharpness (Q): 6dB or less (at optimum adjustment)Needle pressure adjustment range: 0 to 3gShell weight: 9.5g (boron aluminum)Shell terminal lug: 1.2mm?, lug for 4-pin terminalApplicable cartridge weight: 5g to 10gArm mounting hole diameter: 62mm? Accessories WeightsWeight fixing screwHead shell (Technics)Lead wireMounting nut/washerPHONO cableInstruction Manual (copy)(Japanese)Installation gauge (copy) Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

Technics DVD A-10. Audio/Video Player. Open Box R33/B

DescriptionOperation verified.Please check photos for condition. Phono cable not includedShipping Fedex,DHL,Japan Post *For FedEx / DHL shipping items, a person residing in the remote area will have to pay an additional shipping fee.International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.Read more... Conditions shown here are based on our standard.Please understand that the conditions of used items that have been stored in our warehouse changes by time.Listings that shows Working means that it confirmed working when we stored items in our warehouse, some items might stop working during the shipment or after delivery to you.(We double check if they are working before shipping them out) Pre-owned(used) items are used items, so please purchase if you acknowledge it.

Tested and workingPlease see pictures. Feel free to ask any questions!Please note that on any listings involving antiques/collectibles that we do the “bare minimum” on cleaning and only use a paper towel and water. The reason for this is so that the item does not get damaged, stained, looses paint/color, etc. There are items listed that do need cleaned a bit more, but we prefer to leave that to the buyer. Thank you for understanding and Good Luck!*FREE SHIPPING ON ALL LISTINGS/AUCTIONS UNLESS OTHERWISE NOTED* MAKE SURE YOUR ADDRESS IS UPDATED AND CORRECT*It is against eBay policy to ship to any address that is not what you have on file or where ever you requested to have it shipped when you purchased/checked out, doing so voids eBay/PayPal buyer/seller warranties.If you order a product and it gets shipped to a wrong address because you failed to update or provide the correct shipping address you can try to contact the post office, supply them with the tracking number (which will be uploaded when your order ships) and request they forward it to your new address (you can also request they return to sender (us) in which case will issue a full refund). We can not take responsibility for any problems that can occur from a buyer providing incorrect shipping addresses. Orders placed on Friday may not ship until Monday. Feedback:We Strive for Fives! There is no reason to give anyone negative feedback. We handle all items with extreme delicacy and package very carefully for shipping. If there is a problem and you are unsatisfied please email us first so we can rectify ANY problem and have a successful online selling experience. _gsrx_vers_1516 (GS 9.3 (1516))

Véritable Goyard Saint Louis PM Blanc Blanc GOYARD Description TECHNICS Numéro de modèle : SP-15/SH-15B1/EPA-100 Date de sortie du tourne-disque 1979 Paiement Veuillez payer dans les 5 jours après lachat Expédition Mondial!! Durée dexpédition Expédition MéthodeAsieAmérique du Nord Amérique centrale Moyen-Orient UA, NZLEurope ? RussieAmérique du Sud Afrique SME3 - 6 jours4 - 6 jours4 - 6 jours4 - 6 jours Traçabilité et assurance par Air Express Delivery Conditions de vente Garantie de remboursement sous 30 jours en cas de retour par le client. Le retour est accepté pendant 30 jours. À propos de nous Commander plus dun article ?? Nous pouvons combiner votre expédition et économiser votre argent !! Si vous ne trouvez pas les articles que vous recherchez dans notre magasin, Nhésitez pas à nous contacter!! Nous confirmerons si larticle est en stock et nous vous informerons dès que possible. Jai hâte de faire affaire avec vous!! Merci de votre visite dans notre magasin!! Acheteurs internationaux - Veuillez noter : Les droits dimportation, les taxes et les frais ne sont pas inclus dans le prix de larticle ou les frais dexpédition. Ces charges sont sous la responsabilité de lacheteur. Veuillez vérifier auprès du bureau de douane de votre pays pour déterminer quels seront ces coûts supplémentaires avant denchérir/acheter. Ces frais sont normalement perçus par la société de livraison de fret (expédition) ou lorsque vous récupérez larticle - ne les confondez pas avec des frais dexpédition supplémentaires.

Echter Goyard Saint Louis PM Weiß Weiß GOYARD Beschreibung TECHNICS Modellnummer: SP-15/SH-15B1/EPA-100 Plattenspieler Erscheinungsdatum 1979 Zahlung Bitte zahlen Sie innerhalb von 5 Tagen nach dem Kauf Versand Weltweit!! Versanddauer Versand MethodeAsienNordamerika Zentralamerika Naher Osten AU, NZEuropa RusslandSüdamerika Afrika EMS3 - 6 Tage4 - 6 Tage4 - 6 Tage4 - 6 Tage Rückverfolgbar und versichert per Air Express-Lieferung Verkaufsbedingungen Geld-zurück-Garantie innerhalb von 30 Tagen bei Rückgabe durch den Kunden. Die Rückgabe wird 30 Tage lang akzeptiert. Über uns Bestellen Sie mehr als 1 Artikel?? Wir können Ihren Versand kombinieren und Ihr Geld sparen!! Wenn Sie die von Ihnen gesuchten Artikel nicht in unserem Shop finden, Sie können uns gerne kontaktieren!! Wir bestätigen Ihnen, ob der Artikel vorrätig ist, und informieren Sie so schnell wie möglich. Ich freue mich darauf, mit Ihnen Geschäfte zu machen!! Vielen Dank für Ihren Besuch in unserem Shop!! Internationale Käufer – Bitte beachten Sie: Einfuhrzölle, Steuern und Gebühren sind nicht im Artikelpreis oder den Versandkosten enthalten. Diese Gebühren liegen in der Verantwortung des Käufers. Bitte erkundigen Sie sich vor dem Bieten/Kauf beim Zollamt Ihres Landes, wie hoch diese zusätzlichen Kosten sein werden. Diese Gebühren werden normalerweise von der ausliefernden Spedition (Versandfirma) oder bei der Abholung des Artikels erhoben – verwechseln Sie sie nicht mit zusätzlichen Versandkosten.

Item Description Condition : USED Very GoodOutput from both channelsLifter descent speed (oil replenished)Adjustment points, operating feel, etc.Height adjustment, etc.There is no problem in operation. AccessoriesWeightWeight fixing screwsHead shell (Technics)Lead wireMounting nut/washerPHONO cableInstruction manual (copy)Installation gauge (copy) Shipping Standard Shipping (Japan Post , FedEx , DHL) The package will arrive 5-14 days after shipment.Other Term Import duties, taxes, customs fees, and various charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. If the cancellation is due to the buyer, we will charge a PayPal fee. If there is a remote charge for your address, we will charge you for additional shipping. Thank you for your understanding.

Vintage Technics SA-103 FM/AM Stereo Receiver in Silver Tested SEE VIDEO DEMO. This item is used, but in overall good working condition. There are some minor blemishes and scratches from prior ownership and use on the surface of the item. Please refer to pictures. The receiver has been tested and cleaned and works as advertised. Please refer to demo video link below, so you can see it in action and all the testing that was done. See Video Demo Below https://youtu.be/2A-hjlBMtlQ

Vintage Technics Booklet Receivers SA-80 SA-1000 Turntable Amplifer Speakers.