TOPPING MX5 DAC Amplifier Full Balanced TRS 384kHz DSD256 Audio Power Amplifier
- Condition: New: Other
- Price: 229.35 EUR
- Status: sold
- Item number: 256197982661
- Seller: shimsbeauty (434|98.7%)
- Seller information: non commercial
- Item location: accrington, Lancashire
- Ships to: GB
- Shipping: 46,86 EUR
- on EBAY
-
Description
TOPPING MX5 DAC Amplifier Full Balanced TRS 384kHz DSD256 Audio Power Amplifier TOPPING MX5 Amplifier ES9018Q2C DAC Bluetooth APTX NFCA Headphone Amplifier Merus Class D HiFi Power Amplifier (silver)Product Description TOPPING MX5 DAC Class D Amp 70Wx2 NFCA Headphone Amplifier 1600mWx2 USB/OPT/COAX/BT/TRS/RCA IN Desktop Power AMP 384kHz/DSD256 with Remote ControlTOPPING MX5 screen can be set to automatically remain still after 30 seconds of inactivity and only display the current input while the screen is still. TOPPING MX5 can be set to display the volume in either percent or dB.Package includes1 x MX51 x Power adapter1 x Remote control1 x Power cable1 x USB cable1 x Bluetooth antenna1 x 6.35mm-3.5mm conversion adaptor1 x Product instruction manual1 x Product cardTOPPING MX5 supports both HF direct application and user-adjustable treble and bass application. Treble and bass are adjustable from -10 dB to +10 dB respectively.TOPPING MX5 will have two setting memories, C1 and C2. With a long press, the current input selection, output selection, volume level, bass setting, treble setting and gain setting can be stored. The next time you want to use it, just press short. This greatly improves usability.As well as supporting a wide range of digital inputs, topping MX5 also supports fully balanced TRS and single-ended RCA analogue inputs. The range of applications has been further extended.For all interfaces, topping MX5 supports a patented automatic switching function that switches on immediately when a valid signal is detected and automatically switches off (standby) for a certain period of time when a valid signal is lost. For strong and weak analogue signals, topping MX5 offers three selectable sensitivity levels so that great subtleties are never missed. Please note: Digital signal detection is switched on by default. If on, the waiting time for automatic switch-off is 1 minute; if on, the waiting time for automatic switch-off is 10 minutes.Amplifier and headphone gain can also be set. To accommodate various input strengths, topping MX5 allows two gain settings for each of the built-in amplifier and headphones. The gain can be set via the remote control.TOPPING MX5 screen can be set to automatically close after 30 seconds of inactivity and display only the current input.TOPPING MX5 can be set to display the volume in percentages or dB.TOPPING MX5 incorporates an NFCA headphone module tuned for industry-leading low noise and low distortion. It can be used with high-sensitivity IEMs and high-impedance large ears. In-ear capability allows you to enjoy your music without disturbing others.Class D amplifierThe Infineon Merus Class D amplifier allows topping MX5 to output 70W x2 at 10% distortion into 4? load and 55W x2 at 1% distortion into 4? load; at 8? load, it can output 42W x2 at 10% distortion and 35W x2 at 1% distortion, making it suitable for everyday use.TOPPING MX5 incorporates an NFCA headphone module tuned for industry-leading low noise and low distortion. It can be used with high-sensitivity IEMs and high-impedance large ears. In-ear capability allows you to enjoy your music without disturbing others.Q: The sound is interrupted.A: If the amplifier output is overloaded, the internal protection circuitry is activated and the amplifier output is switched off to protect the speaker. Turn the potentiometer volume down slightly and then restart topping MX5.Q: No sound is produced after switching on the power.A: The signal input is incorrectly selected or the audio cable is incorrectly connected. Switch the signal selection switch or reconnect it.Q: Sound is lost.A: The temperature is too high. Switch off the power and allow the temperature to cool down before restarting topping MX5.Q: Noise is generated.A: There is a possibility of poor contact of the connection wires, check that the connection wires are normal.Q: Noise is generated.A: Use shielded input/output cables.Q: Is there a subwoofer output?A: TOPPING MX5 does not have a subwoofer output.Q: Does it come with a remote control?A: TOPPING MX5 comes with a remote control.Product descriptionSPE? MX5 Headphone Amplifier specifications? THD+N @1kHz (A-wt)? USB/OPT/COAX ? SE/BAL? SNR @MAX OUT 1kHz (A-wt)? USB/OPT/COAX ?120dB SE?128dB BAL:127dB Dynamic Range @1kHz (A-wt)? USB/OPT/COAX ?120dB SE?129dB BAL?127dB Frequency Response?20Hz-20kHz (+0.1dB/-0.3dB)?20Hz-40kHz (+0.1dB/-1.0dB) Output Level? USB/OPT/COAX ?5.6Vpp @GL?24.6Vpp @GH SE/BAL?10.6Vpp @GL?24.6Vpp @GH Noise@A-wt? Channel Crosstalk@1kHz?-93dB Input sensitivity? USB/OPT/COAX ?0dBFS @GL?-1dBFS @GH SE?3.9dBFS @GL?1.8dBFS @GH BAL?7.8dBFS @GL?3.6dBFS @GH Gain? USB/OPT/COAX ?6.0dB(Vrms/FS) @GL?19dB(Vrms/FS) @GH SE?-0.2dB(Vrms/FS) @GL?13.6dB(Vrms/FS) @GH BAL?-6.1dB(Vrms/FS) @GL?7.6dB(Vrms/FS) @GH Output Impedance? Output Power?1600mW X 2 @320 THD+N Load Impedance?> 8? MX5 Power Amplifier specifications : THD+N@1kHz (A-wt): SNR @MAX OUT 1kHz (A-wt):110dB Dynamic Range@1kHz (A-wt):110dB Frequency Response:20Hz-20kHz ( +0.1dB/-0.5dB)? 20Hz-40kHz (+0.1dB/-1.5dB) Output Level:42Vpp @RL4?? 46Vpp @RL8? Noise@A-wt: Channel Crosstalk@1kHz? USB/OPT/COAX :-93dB SE:-90dB BAL :-91dB Input sensitivity? USB/OPT/COAX :-1. 5dBFS @GL? -7dBFS @GH SE:1.7Vrms @GL ?0.9Vrms @GH BAL :3.5Vrms @GL? 1. 8Vrms @GH Gain? USB/OPT/COAX :25.2dB (Vrms/FS) @GL ?30.7dB (Vrms/FS) @G H SE:19dB @GL ?24. 5dB @GH BAL :13dB @GL? 18. 5dB @GH Output Impedance? Output Power? 70W X 2 @4? THD+N 55W X 2 @4? THD+N 42W X 2 @8? THD+N 35W x 2 @8? THD+N Load Impedance?4-8? About this itemTRS Balanced & Single-ended RCA inputs ?In addition to supporting various digital inputs, MX5 also supports fully balanced TRS and single-ended RCA analog inputs. Greatly expand the scope of application.Merus Class D amplifier ?With the help of Infineon Merus Class D amplifer, MX5 can output 70W x2 under 4 ohm load 10% distortion, 55W x2 under 4 ohm load 1% distortion. Under 8 ohm load, 10% distortion can output 42W x2, and 1% distortion can output 35W x2, which can meet daily use.NFCA Headphone Amplifier ?The MX5 has the NFCA circuit optimized for this unit, giving the ultra low noise and distortion. It pairs with high sensitivity IEMs and power hungry high impedance headphones nicely. The built-in headphone amp allows you to enjoy music by yourself without disturbing others.Built-in EQ function, now you can adjust treble and bass ?MX5 supports users to adjust the treble and bass. The treble and bass provide adjustable ranges from -10dB to +0dB respectively.2 step gain settings for both power amplifier & headphone amplifier ?In order to adapt to input signals with different strengths, MX5 provides two step gain settings for both power amplifier and headphone amplifier. The gain can be set on the remote control
Live search