Zum Verkauf steht mein Schiit Asgard 3 mit dual AK 4490 DAC, der Verstärker wurde die letzten Jahre von mir benutzt, wird jetzt aber aufgrund eines Umstiegs auf ein Class D Verstärker verkauft.Der Verstärker funktioniert Tadellos, jedoch hat das DAC ein kleines Problem, wenn kein USB Kabel verbunden ist, gibt es ein Hochfrequentes piepen über den Kopfhöreranschluss aus, dieses verschwindet sofort, sobald ein der Verstärker per USB Kabel mit dem Computer/der Audioquelle verbunden wird. Das Problem bestand schon immer, daher weiß ich nicht, ob es bei diesem DAC normal ist oder ob es sich um einen kleinen Defekt handelt.Es gibt bei Schiit direkt auch verschiedene DAC Karten, die man kaufen und einbauen kannIm reinen Verstärker Modus mit externem DAC gibt es dieses Piepen nichtDer Kopfhörerverstärker ist nun einige Jahre alt und hat dementsprechend ein paar Gebrauchspuren, welche den Bildern entnommen werden können (kleine Oberflächliche Kratzer)Neupreis knapp 480€380€ AMP100€ DAC CardFrequency Response: 20Hz-20Khz, -0.1db, 2Hz-400KHz, -3dBMaximum Power, 16 ohms: 5W RMS per channelMaximum Power, 32 ohms: 3.5W RMS per channelMaximum Power, 50 ohms: 2.5W RMS per channelMaximum Power, 300 ohms: 600mW RMS per channelMaximum Power, 600 ohms: 300mW RMS per channelTHD: Less than 0.002%, 20Hz-20KHz, at 1V RMS, high gain mode (worst case)IMD: Less than 0.002%, CCIF at 1V RMS, high gain mode (worst case)SNR: More than 115db, unweighted, referenced to 1V RMS, in low gain modeCrosstalk: Less than -82dB, 20Hz-20KHz, 300 ohm loadOutput Impedance: Less than 0.2 ohms in high or low gain modeInput Impedance: 22K ohmsGain: High = 6 (15.6dB) or Low = 1 (0dB), via rear switchTopology: Fully discrete, current feedback with Continuity™ constant-transconductance output stage and stacked power supply railsProtection: Standard muting relay for delayed turn-on and fast turn-offPower Supply: Internal 48VA power transformer with 4 separate power supply rails and over 20,000uf of filter capacitancePower Consumption: 30WPrivatverkauf, daher keine Garantie, Gewährleistung oder Rückgabe möglich.

1x Silver Version Gently Used, One Small Scratch Above Main Knob, In Great Condition otherwise. The Strong, Silent Type Asgard 3 is a highly powerful, highly affordable, modular headphone amp and preamp that gives you a complete, single-box solution for all your desktop needs. It’s a re-thinking of the headphone amp that started it all (for Schiit, anyway—the original Asgard, introduced in June 2010, was our first product.) Asgard 3 features our unique Continuity™ topology that extends the benefits of Class A output, and accepts all the same modules as Jotunheim and Lyr 3. Asgard 3’s all-new Continuity output stage delivers 3.5W into 32 ohms—a whopping 3.5X more than any previous Asgard—while also running 500mW of Class A bias. What this means is you have tons of power for virtually any headphone—and, since full power is delivered to the ¼” jack, you don’t need balanced headphone cables to take advantage of it. At the same time, Asgard 3’s low noise floor means you are ready for the most sensitive IEMs. A Complete Desktop Control Center Select from the internal card or rear-panel analog input, and pick high or low gain with convenient front switches. Connect the preamp output to your powered monitors for a complete desktop system—or use it as a front end to your speaker power amplifier. Asgard 3 provides all the flexibility you need. Designed and Built in California By “designed and built in California this is what we mean: the vast majority of the total production cost of Asgard 3—chassis, boards, transformers, assembly, etc—goes to US companies manufacturing in the US. Our chassis are made minutes from our facility. Our PCBs are done just over the hill from us, or done in NorCal. Our transformers are also made in California. You get the picture. Frequency Response: 20Hz-20Khz, -0.1db, 2Hz-400KHz, -3dB Maximum Power, 16 ohms: 5W RMS per channel Maximum Power, 32 ohms: 3.5W RMS per channel Maximum Power, 50 ohms: 2.5W RMS per channel Maximum Power, 300 ohms: 600mW RMS per channel Maximum Power, 600 ohms: 300mW RMS per channel THD: Less than 0.002%, 20Hz-20KHz, at 1V RMS, high gain mode (worst case) IMD: Less than 0.002%, CCIF at 1V RMS, high gain mode (worst case) SNR: More than 115db, unweighted, referenced to 1V RMS, in low gain mode Crosstalk: Less than -82dB, 20Hz-20KHz, 300 ohm load Output Impedance: Less than 0.2 ohms in high or low gain mode Input Impedance: 22K ohms Gain: High = 6 (15.6dB) or Low = 1 (0dB), via rear switch Topology: Fully discrete, current feedback with Continuity™ constant-transconductance output stage and stacked power supply rails Protection: Standard muting relay for delayed turn-on and fast turn-off Power Supply: Internal 48VA power transformer with 4 separate power supply rails and over 20,000uf of filter capacitance Power Consumption: 30W Size: 9 x 6 x 2 Weight: 5 lbs

Schiit Asgard 2 headphone amp and Schiit Modius (First version with micro USB)These were used on my PC setups and both are in good working order.Comes with a Micro USB to USB A cable as well as the power cord for the Asgard 2.

For sale is a barely used Schiit Audio Asgard 3 headphone amp. In great condition and works great. Comes with the power cord. Shipping in the lower 48 only.

Works perfectly, power cable included

Schiit Asgard 2 Class A Discrete Headphone Amplifier (SCH01-2, Black) is an audiophile-grade class A discrete desktop headphone amplifier. Purchased in late 2020. Has 1x stereo RCA input, 1x stereo RCA pre-output, 1x headphone jack, Hi/Lo gain control. Works great. Im selling as Ive bought a newer smaller headphone amp from Schiit and I am downsizing my headphone collection. Test, Working (See Pictures)

Selling Schiit Asgard 3 black variant. Comes with original packaging and power supply. Item is in mint condition with no defects. 100% functional. Selling because I upgraded.