Block PS-100+ Plattenspieler - Schwarz
- Condition: Used
- Price: 1600.0 EUR
- Status: unsold
- Item number: 126719572145
- Bids: 0
- Seller: gsbmw (3786|99.2%)
- Seller information: non commercial
- Item location: Krefeld
- Ships to: None
- Shipping: 0,0 EUR
- on EBAY
Up for sale are two Emotiva XPA-100 Monoblock, high-quality power amplifiers. With four inputs, including stereo L/R RCA and XLR, these amplifiers will make your music collection or streaming choices sing. Its two outputs provide optimal power for an immersive listening experience. At 250 watts into 8 ohms and 400 watts into 4 ohms, these amps will have enough power to handle the most demanding speakers. Personally, I used a pair of Focal 926 full-range speakers with glorious results. Each amplifier comes with one 12-volt trigger wire, one XLR interconnect cable, and one Shunyata Research two-meter power cable. The amps will be shipped in its original double-box packaging. The Generation One amp doesnt come with a manual. It can be downloaded, however, at https://www.manualslib.com/manual/678572/Emotiva-Xpa-100.html#manual This system started out with two, first-generation amps. One of the amps failed over time so I replaced it with the second-generation amp. The specifications of the two amps are identical. The only difference with the generation-two amp is its all-black exterior. The two silver end caps on the generation-one can be replaced with black ones, a part that readily comes up for sale on the used market, an option if you want to maintain the visual continuity of your system. For me, the sound I was the only important thing that is why I never replaced them. I rate both amps in terms of cosmetics at an 8. There is a small smudge on the front of one amp (pictured) and a small scratch on top of the Generation-2 amp that isnt noticeable unless you know where to look (toward the back of the amp on the right-hand side. Note: I have left the protective film in place over the display on both amps. If you peel it off youll have a pristine display. In terms of performance, these two amps bring the muscle with bass that it is forceful and fast while the mids are neutral as well as the highs. Of course, the pre-amplifier controlling these amplifiers plays a big part in the sound reproduction. I used a Parasound Halo P6 that I have up for sale on ebay as well. Please see my separate ad. my listening room is small these days so I no longer need that Emotiva power. Ive downgraded to much less powerful integrated. Its now time for someone else to enjoy these amps. SPECIFICATIONS Fully discrete, dual differential, high current, short signal path Class A/B.Number of Channels: 1Power Output (rated power; THD < 1%):250 watts (1 channel) into 8 Ohms.400 watts (1 channel) into 4 Ohms.Rated Power Bandwidth (at rated power; 8 Ohm load):10 Hz to 20 kHz + / - 0.07 dB.Minimum Recommended Load Impedance:4 Ohms (which equals one 4 Ohm load or two paralleled 8 Ohm loads).Frequency Response:10 Hz to 80 kHz (+ 0 / - 1 dB).THD + noise:< 0.02%Signal to Noise Ratio (8 Ohm load):> 89 dB at 1 watt (A-weighted).> 112 dB at rated power (A-weighted).Damping Factor (8 Ohm load):> 500Speaker Output Connections:Full-sized, 5-way binding posts; two pairs per channel (one channel).Power Supply:60,000 uF of storage capacitance.360 VA heavy duty toroidal transformerWeight: 28 pounds unboxed These amps have always been in a pet-free and smoke-free environment. The shipping price listed is for BOTH amps not just one. I will only ship to the lower 48 states. My apologies to all other interested parties. PayPal only. I have a 100% feedback rating. Buy with confidence.
LookNoReserve Klipsch SB-3 2-away 100W 8 ohm Speaker Terminal Block with Crossover.One Pair. Connects to 1 tweeter and 1 woofer each as labeled on the crossover circuit board.Buyer needs to solder their own speakers to the crossover circuit board.Speaker wires are NOT included. ConditionUsed.Pulled from working Klipsch Model SB-3 2-Way 100W 8 ohm Speakers.Mounting screws included. No speaker wires.One red binding post screw has a plastic crack but still works (see the last photo). PolicyOn your touchscreen, Pinch to Zoom on the photos to see the condition before buying. Please feel free to ask me any questions before buying.All sale is as-is. All sales final. No return. No local pickup.Make sure your shipping address is correct. No shipping to alternate address request after checkout.Sale is to United States buyers and ships to United States only. No international shipping.No shipping to APO, FPO, DPO, & Correctional Facilities.
LookNoReserve Klipsch SB-3 2-away 100W 8 ohm Speaker Terminal Block with Crossover.One Pair. Connects to 1 tweeter and 1 woofer each as labeled on the crossover circuit board.Buyer needs to solder their own speakers to the crossover circuit board.Speaker wires are NOT included. ConditionUsed.Pulled from working Klipsch Model SB-3 2-Way 100W 8 ohm Speakers.Mounting screws included. No speaker wires.One red binding post screw has a plastic crack but still works (see the last photo). PolicyOn your touchscreen, Pinch to Zoom on the photos to see the condition before buying. Please feel free to ask me any questions before buying.All sale is as-is. All sales final. No return. No local pickup.Make sure your shipping address is correct. No shipping to alternate address request after checkout.Sale is to United States buyers and ships to United States only. No international shipping.No shipping to APO, FPO, DPO, & Correctional Facilities.
Block Audio PS 100+Plattenspieler Incl. Original Verpackung ohne Tonabnehmer. Nur Abholung, Versand nur auf Anfrage und auf Risiko des Kufers.
LookNoReserve Klipsch SB-3 2-away 100W 8 ohm Speaker Terminal Block with Crossover.One Pair. Connects to 1 tweeter and 1 woofer each as labeled on the crossover circuit board.Buyer needs to solder their own speakers to the crossover circuit board.Speaker wires are NOT included. ConditionUsed.Pulled from working Klipsch Model SB-3 2-Way 100W 8 ohm Speakers.Mounting screws included. No speaker wires.One red binding post screw has a plastic crack but still works (see the last photo). PolicyOn your touchscreen, Pinch to Zoom on the photos to see the condition before buying. Please feel free to ask me any questions before buying.All sale is as-is. All sales final. No return. No local pickup.Make sure your shipping address is correct. No shipping to alternate address request after checkout.Sale is to United States buyers and ships to United States only. No international shipping.No shipping to APO, FPO, DPO, & Correctional Facilities.
Der PS-100 aus limitierter Auflage ist ein High-End Plattenspieler mit einem sehr guten Preis-Leistungs-Verhältnis. Ausgestattet mit einem 1,5 kg schweren, externen Motor mit 33 und 45 RPM Antrieb. Das Chassis besteht aus hochglanzlackiertem MDF und massiven, präzise gearbeiteten Aluminiumsockeln; dieser ruht auf justierbaren Spikefüßen. Der Plattenteller aus Acrylglas und der nur 11,5 g schwere Tonarm inklusive 65 g Gegengewicht sowie ein Antiskating-Gewicht runden die Ausstattung ab. Diese findet man sonst nur bei Geräten jenseits der 2000 Euro Grenze.Tonabnehmer nicht im Lieferumfang Zweilagiger Sandwichaufbau für beste Resonanzabsorbtion Vollmetallfüße in Form von Spikes Massiver Plattenteller aus Acrylglas 9,5 Zoll Arm von ProJect (11,5g) Entkoppelter separater Motor mit Teflon-Antriebsriemen Vollautomatische Geschwindigkeitsregelung Cinch-Anschlusskabel mit Erdung Design in Schwarz, Sonder-Edition in Weiß & Silber Geschwindigkeit: 33.33 | 45 RPM Geschwindigkeitsreglung: Vollautomatisch Gleichlaufschwankung: ± 0,1 % Leistungsaufnahme: 5,5 Watt Effektive Tonarmmasse: 11,5 g Fremdspannungsabstand: > 65 db Effektive Tonarmlänge: 236,2 mm Externes Netzteil Eingang: AC 100 - 240 V bei 50 - 60 Hz Externes Netzteil Ausgang: DC 18 V bei 1,33 A System: Ortofon OM 5E Abmessung B | H | T: 450 x 190 x 375 mm (mit Motor) Gewicht (kg): 12,5
LookNoReserve Klipsch SB-3 2-away 100W 8 ohm Speaker Terminal Block with Crossover.One Pair. Connects to 1 tweeter and 1 woofer each as labeled on the crossover circuit board.Buyer needs to solder their own speakers to the crossover circuit board.Speaker wires are NOT included. ConditionUsed.Pulled from working Klipsch Model SB-3 2-Way 100W 8 ohm Speakers.Mounting screws included. No speaker wires.One red binding post screw has a plastic crack but still works (see the last photo). PolicyOn your touchscreen, Pinch to Zoom on the photos to see the condition before buying. Please feel free to ask me any questions before buying.All sale is as-is. All sales final. No return. No local pickup.Make sure your shipping address is correct. No shipping to alternate address request after checkout.Sale is to United States buyers and ships to United States only. No international shipping.No shipping to APO, FPO, DPO, & Correctional Facilities.
Hifonics Cyclops VIII 100W Mono Block Blue Amplifier *OLD SCHOOL* MADE IN USA!. I have no way to test this buy everything looks to be good. It was taken from a working system
Design Plattenspieler Block Audio PS 100+ inkl. Tonarm und Systemneu und unbenutzt. Ein wirklich schöner Plattenspieler, war ein Geschenk, neu und unbenutzt. Hier wäre mir wirklich die persönliche Abholung am liebsten.Versand geht, weil die Originalverpackung fast komplett vorhanden ist. In weiteren Auktionen biete ich den Rest der Block Audio Anlage an.
Live search