LUXMAN PD131 RECORD PLAYER EQUIPPED WITH SME 3009 S2 IMPROVED, MAINTAINED Description ?? Condition: Used Please confirm the condition by reviewing the images carefully. ?? LUXMAN PD131 with SME 3009 S2 Improved Record Player The PD131, an armless player released around 1975, is now equipped with the SME 3009 S2 Improved. Its stylish design, which doesn’t show its age, is truly eye-catching. ?Condition: Each part has been polished and cleaned. The dust cover has been polished with a special compound depending on the level of scratches, and finished with a gloss to enhance transparency. The platter and metal parts have been polished as much as possible to remove dirt and rust. Dust Cover / Button Section / Platter / Rubber Mat The cover is clean with no noticeable scratches and has a clear, transparent appearance. The button section shows only minor dulling, with no visible cracks. The platter is in good condition with a glossy finish. The rubber mat shows some signs of use on the fabric surface, but there is no deterioration or warping, and it remains soft. Cabinet The top plate is in good condition, with no major damage and a glossy finish. The black body at the bottom shows some minor dulling and small scratches, but there are no significant damages. All four insulators are functioning properly, and the hinges are intact, holding the cover open without any issues. Tonearm It is in good condition with a glossy finish and no noticeable damage. Overall, the item is in good condition. Considering its age, we have determined it to be a quality product. Please note that this is a used item with years of use, and therefore, minor scratches, scuffs, and signs of wear may be present. Please bid with this understanding. The criteria for evaluating the condition are based on our companys standards for handling vintage audio equipment, and our staff has made the selections accordingly. Since the perception of condition can vary from person to person, there may be differences compared to your own standards. Please carefully review the images and make your judgment. We are happy to answer any questions you may have about the condition, so feel free to contact us. ? Operation For this sale, we have conducted comprehensive maintenance. We replaced consumable electronic parts (such as electrolytic capacitors) and adjusted various components. It is in a condition where you can use it with confidence. Turntable: Operation is good It rotates smoothly and normally without any abnormal noise. The stroboscope has confirmed stable rotation. Fine adjustments can be made using the rotation adjustment dial. The start/stop response is also smooth in sync with the ON/OFF button. The strobe light works without any issues. This item is compatible with both 50/60Hz. Tonearm: Operation is good Both left and right channels output good sound. The lifter lever allows for smooth lowering (oil has been replenished). Anti-skating and tracking force adjustments are functioning well. The tonearm height can also be adjusted. There are no problems with any of the above operations, and the unit is in good working condition. This is a turntable system combined with an arm. Although some adjustments have been made, please understand that further fine-tuning may be required depending on the buyers usage environment. We conduct thorough product checks, but if there is any initial malfunction, we offer free repairs or a refund within one week of receiving the item. Please return the item to us at our expense in the event of a malfunction. After receiving the returned item and confirming its condition, we will issue a refund. ? Product Details Manufacturer: LUXMAN Model Number: PD131 Product Details ? Accessories Dust cover Dedicated rubber mat Instruction manual (copy) Tonearm SME 3009 S2 Improved (pre-installed) Counterweight Tracking force adjustment weight Inside force canceler weight Instruction manual for 3009 S2 Improved (copy) Alignment protractor (copy) Mounting plate (copy) SME cable (pre-installed) The record, headshell, and cartridge used for photography are not included. Only the items shown in the photos are included; please check carefully. ?? Please feel free to ask any questions. We will respond within 48 hours. The product description may use automatic translation by AI. There may be some minor translation errors or unnatural parts. If any questions arise due to this, please be sure to ask before making a purchase. We will make every effort to address any questions before the purchase. Shipping ?? Items would generally be dispatched within 6 working days. ?? Most items will be shipped using FeDex, DHL or UPS which is reliable and arrives quickly. ?? Please note that for special items, or depending on the destination country, different shipping methods may be used. ?? Depending on the country, certain items such as watches and sunglasses may experience delays during customs clearance. Please be aware of this in advance. ?? As liquids are difficult to export, ink will not be included with pens, etc. Even if there are ink bottles in the images, the contents will be removed before shipping. International Buyers - Please Note: ?? Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. ?? Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. ?? These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. ?? The customs declaration amount will be based on the selling price on eBay. It is illegal to underdeclare the declared amount, a practice commonly referred to as undervaluing, so it must not be done under any circumstances. Similarly, declaring items as gifts is also not permitted.

PRODUCTS LUXMAN TF-LS PD300/PD310/PD350 Genuine Arm Base Condition There are some scratches and scuffs, There are some scratches and scuffs, but there is no major damage and it is shiny. Item Contents Manufacturer?LUXMAN Model number?TF-LS External size: 130 mm (diameter) x 8 mm (thickness) Arm mounting area: approx. 70 mm (length) x 30 mm (width) Weight: approx. 228g Compatible arms SME: 3009 S2, 3009 S2 improved, 3009 S3, 3009-R, 3010-R Accessories Tone arm fixing screws x 4 The items shown in the photo are all that are included. Please check them. PAYMENTSWe accept PayPal and all major Debit / Credit Cards. We can only ship your item after your payment clears. We ship within 10 days of payment. CHECKOUTPlease check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed. SHIPPINGPackages:Box and Bubblerup Packages usually leave our warehouse within 10 days of payment. Weekend orders will ship on Monday or Tuesday. We provide valid Tracking Numbers for all orders. International PackagesWe ship to all US Territories, Europe and Asia and Middle East and Australia and Canada including Guam and Hawaii.All our international packages ship under the Fedex or Japan Post or DHL. CUSTOMER SERVICEIf you have any questions or issues, we are at your service. You can email us anytime through eBay messages. RETURN INFORMATIONWe offer a standard FREE 30 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund. Customs dutyImport duties, taxes, and charges are not included in the item price or shipping cost.These charges are the buyers responsibility.Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.We will reply to your question or invoice within 3 days.We cant not reply gifts or unreasonable requests such as declared amount. Thank you for reading to the end!

The C-300 is a rare model introduced in 1980, functioning as a control amplifier that showcases Luxs advanced technology for enjoying Luxstone. It features a Duo-Beta plus X circuit with appropriate control philosophies like adequate NFB and DC servo, supported by a robust power supply for enhanced control. The amplifier boasts excellent bare characteristics achieved through a cascoded amplifier with a dynamic resistance circuit and employs a pure complementary P.P. circuit in the output stage. It also includes a sound quality-focused MC head amplifier with independent left and right power supplies, utilizing a powerful and carefully selected material for the power supply, ensuring quality sound. The power supply is a twin-mono configuration that provides ample control capability. The cabinet is finished with natural rosewood veneer. Dimensions: 18.9 inches (W) x 6.4 inches (H) x 15.1 inches (D). Weight: 19.8 lbs. Condition: It operates normally but has a burnt power lamp and a slightly faulty subsonic button. It has been internally cleaned previously. Retail price: ¥220,000 (excluding tax). The M-300 is a power amplifier with a graceful design typical of Lux, delivering substantial performance. It offers continuous effective output of 40W + 40W (8?) in Class A and 270W + 270W (4?) in Class AB. The amplifier embodies the philosophy of minimal excess with the Duo-Beta plus X circuit and uncompromising pure Class A operation. The NFB of the amplifier circuit is appropriately controlled to enhance sound quality, while the power supply circuit also implements the same control philosophy. The amplifiers static and dynamic characteristics reflect no compromise in achieving pure Class A operation. It features a push-pull configuration throughout from input to output and employs high-speed components like LAPT for excellent bare characteristics. The power supply is a high-capacity reinforced type that utilizes a large transformer, with thorough management of winding direction. Dimensions: 18.9 inches (W) x 8.4 inches (H) x 8.4 inches (D). Weight: 66.1 lbs. Condition: It operates normally. Previously maintained, with banana plug-compatible speaker terminals and a high-quality power cable replaced from the original, and internal cleaning completed. It may be advisable to re-tighten the terminals. Please check the exterior condition in the provided photos. Specifications reference is based on audio memoirs. Retail price: ¥290,000 (excluding tax). Shipping from Japan with Tracking Number & Insurance. I promise fast shipping via FedEx or DHL as soon as possible! Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

Guaranteed for one month. This tube preamp kit was announced at the launch of the Luxkit brand. Max output: 15V (distortion rate 0.5%), Rated output: 2V (distortion rate ?0.08%), Output impedance: 950?, Frequency response: 20Hz-20kHz -0.5dB, THD: ?0.08% (2V output), SN ratio: Phono1, 2: ?60dB, Aux1, 2, 3: ?77dB. Includes dedicated power supply A33. Shipping from Japan with Tracking Number & Insurance. I promise fast shipping via FedEx or DHL as soon as possible! Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

????Including & Condition Details: As shown in photos. ????Shipping: FedEx LUXMAN PD131 Record Player with SME 3009 S2 Improved Tonearm This Armless player was released around 1975. This time we set up SME 3009 S2 Improved. The stylish design that does not feel aged is eye-catching. ?ConditionEach part has been polished/cleaned. The dust cover is polished with a special abrasive depending on the level of scratches, and the finish is polished to enhance transparency. The platter and metal parts are polished to remove dirt and rust as much as possible. Dust Cover/Button Part/Platter/Rubber Mat ?There are no noticeable scratches on the cover, it is transparent and beautiful. ?The buttons have no cracks. ?The platter is also shiny and in good condition. ?The rubber mat has a feeling of use on the surface cloth part, but it is soft without deterioration or warping. Cabinet ?There is no major damage to the top plate, it is shiny and in good condition. There are some dullness/scratches on the black body at the bottom, but no major damage. - All four insulators are functioning and the hinges remain open without any damage. Tonearm - No noticeable damage, shiny and clean. Overall in good condition. Considering the age, we judge it to be a good product. ?Operation We have performed comprehensive maintenance at our company for this sale. We have replaced consumable electronic parts (electrolytic capacitors, etc.) and adjusted each part. It is in a condition that you can use with confidence. Turntable It works well and rotates smoothly and normally without any abnormal noises. The stable rotation has been confirmed with a stroboscope. - Fine adjustment is possible with the rotary adjustment dial. - Linked to the ON/OFF button, there is no problem with the start/stop response. - There is no problem with the strobe lighting. *This item is common to 50/60Hz. Tonearm It works well and outputs good sound on both the left and right channels. - Smooth descent with the lifter lever. (Oil refilled) - Anti-skating/needle pressure adjustment is also good. - The height of the tonearm can also be adjusted. All of the above operations are fine and in good working order. It is a player system combined with the arm. Although some adjustments have been made, please note that various fine adjustments may be necessary depending on your usage environment. ?Product Details Manufacturer: LUXMANModel: PD 131 ?Accessories ?Dust Cover ?Special rubber mat ?Instruction manual (copy) ?Tonearm: SME 3009 S2 Improved (installed) ?Counter weight ?Needle pressure adjustment weight ?Inside force canceller weight ?Instruction manual for 3009 S2 Improved (copy) ?Alignment protractor (copy) ?Mounting plate (copy) ?SME cable (installed) ?The record, headshell, and cartridge in the photos are for presentation, they are not included. ????Message from SellerHi, my name is Danny Chou. I live in Tokyo, Japan. I can speak quite fluent English :)I can source anything you want from Japan! Feel free to contact me anytime! ??Check Your AddressPlease check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed. ??Tracking & PackingPackages: Box or envelope and Bubble wrapWe provide valid Tracking Numbers for all orders.All our international packages will be shipped by FedEx or DHL. ??ReturnWe offer a standard FREE 60 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund. ????Customs DutyImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

Descriptiontransformer type line controller20Hz to 20kHz within ±2dBRank C due to many scratches.Payment payoneerShipping japan post -Fedex *For FedEx / DHL shipping items, a person residing in the remote area will have to pay an additional shipping fee.Terms of Sale We can accept return within 60 days after you receive it. Please make sure to contact us first if you want to return it. It is buyers responsibility for the return shipping cost when sending back the item to us. The item has to be returned in the original condition from the time you received. No returns on products that show any evidences of use.International Buyers - Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.Conditions shown here are based on our standard.Please understand that the conditions of used items that have been stored in our warehouse changes by time.Listings that shows Working means that it confirmed working when we stored items in our warehouse, some items might stop working during the shipment or after delivery to you.(We double check if they are working before shipping them out) Pre-owned(used) items are used items, so please purchase if you acknowledge it.

LUXMAN PD 131 Turntable & SME 3009 S2 Improved Tonearm w/Dust Cover from Japan Description Condition: Used LUXMAN PD131 Record Player with SME 3009 S2 Improved TonearmThis Armless player was released around 1975. This time we set up SME 3009 S2 Improved. The stylish design that does not feel aged is eye-catching.?ConditionEach part has been polished/cleaned.The dust cover is polished with a special abrasive depending on the level of scratches, and the finish is polished to enhance transparency. The platter and metal parts are polished to remove dirt and rust as much as possible. Dust Cover/Button Part/Platter/Rubber Mat?There are no noticeable scratches on the cover, it is transparent and beautiful.?The buttons have no cracks.?The platter is also shiny and in good condition.?The rubber mat has a feeling of use on the surface cloth part, but it is soft without deterioration or warping.Cabinet?There is no major damage to the top plate, it is shiny and in good condition. There are some dullness/scratches on the black body at the bottom, but no major damage.- All four insulators are functioning and the hinges remain open without any damage.Tonearm- No noticeable damage, shiny and clean.Overall in good condition.Considering the age, we judge it to be a good product.?OperationWe have performed comprehensive maintenance at our company for this sale. We have replaced consumable electronic parts (electrolytic capacitors, etc.) and adjusted each part.It is in a condition that you can use with confidence. TurntableIt works well and rotates smoothly and normally without any abnormal noises. The stable rotation has been confirmed with a stroboscope.- Fine adjustment is possible with the rotary adjustment dial.- Linked to the ON/OFF button, there is no problem with the start/stop response.- There is no problem with the strobe lighting.*This item is common to 50/60Hz. TonearmIt works well and outputs good sound on both the left and right channels.- Smooth descent with the lifter lever. (Oil refilled)- Anti-skating/needle pressure adjustment is also good.- The height of the tonearm can also be adjusted. All of the above operations are fine and in good working order.It is a player system combined with the arm. Although some adjustments have been made, please note that various fine adjustments may be necessary depending on your usage environment.?Product DetailsManufacturer: LUXMANModel: PD 131?Accessories?Dust Cover?Special rubber mat?Instruction manual (copy)?Tonearm: SME 3009 S2 Improved (installed)?Counter weight?Needle pressure adjustment weight?Inside force canceller weight?Instruction manual for 3009 S2 Improved (copy)?Alignment protractor (copy)?Mounting plate (copy)?SME cable (installed)?The record, headshell, and cartridge in the photos are for presentation, they are not included. All my products are 100% Authentic.Please feel free to contact us if you have any question.Please check the picture. Payment Please pay within 5 days after the auction closed. Shipping About other area, please ask me. When you purchase two or more my items, I can send them together and discount shipping cost. Returns Returns are accepted ONLY if the item was not the item described. International Buyers - Please Note: * Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. * Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. * These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. * We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior. Yamaha YSP-2700 Digital Sound Bar Projector Black Wi-Fi Music Cast YSP2700 Japan

Description+++ Warranty Period 1 month warranty Features and Remarks Tube preamplifier kit released with the launch of the Luxkit brand Maximum output Max: 15V (distortion rate 0.5%) Rated output Rated: 2V (distortion ratio 0.08% or less) Impedance Output impedance: 950? Playback frequency Frequency response: 20Hz to 20kHz -0.5dB Features/Remarks Total harmonic distortion: 0.08% or less (output 2V) SN ratio Phono1 2: 60dB or better Aux1 2 3: 77dB or better Features and Remarks Dedicated power supply A33 included Shipping+++ Fedex International Buyers - Please Note+++ Import duties taxes and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.

DescriptionCondition : USED Condition : USED Thank you for looking. [Product]-LUXMAN Pure Class A Stereo Power Amplifier M-06? Luxman with instructions [Operation/Condition]-Power supply: confirmed.-Input/output : No sound was confirmed from the BALANCE side of the INPUT SELECTER.- All other inputs and outputs have been -confirmed. -At first there is no sound from the left side, but after listening a little longer, great sound comes out from both sides.-Panel operation: It is working. [Appearance]-No noticeable scratches or stains [Contents]-Main unit-Instruction manual [Specifications]- Manufacturer: LUXMAN-Model number: M-06?-Type: Stereo power amplifier-Continuous effective output-stereo: 55W + 55W (8?, 20Hz to 20kHz, both A-class channels operated simultaneously)-mono: 220W (8?, 20Hz to 20kHz, balanced input)-Input level adjustment 50k? fixed resistor switchable 12-point attenuator (coaxial)-Total harmonic distortion 0.008% or less (8?)-Intermodulation distortion-(8?, 60Hz:7kHz=4:1) 0.008% or less-Frequency response 5Hz to 300kHz, +0 -3dB-Signal-to-noise ratio (IHF-A) 110dB-Damping factor 100 (8?, 50Hz)-Power supply voltage AC100V, 50Hz/60Hz-Power consumption 300W-External dimensions Width 444 x Height 211 x Depth 417mm-Weight 22kg This product is an authentic product sold in Japan. Please be assured that we package each item carefully without causing damage. Shipping We send a product with careful packing. After confirm your payment, Well ship this item within 5 business days. (except for Saturday, Sunday and national holiday in JAPAN) Weekends are not available because FedEx or DHL are closed. Returns We accept return items up to 60 days after the item has arrived. If you receive a defective product, please contact us. We will bear the return shipping costs. Please buy with confidence. About us Thank you for your seeing our page. Please feel free to question if there is an uncertain point on this page. We cordially answer it. International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

DescriptionCondition : USED Condition : USED Thank you for looking. [Product]-LUXMAN PD441 Record Player -Includes SME MODEL3009-Cartridge: ANT-120Ea [Operation/Condition]-Operation confirmed*Caution*One of the earth wires looks like it may be torn off, so please repair it if necessary*Please refer to the 10th image [Appearance]-Some scratches-Needle is slightly bent, but playback is fine [Contents]-Everything shown in the picture is included [Specifications]- Power supply AC100V, 50Hz/60Hz-Power consumption 16W (constant)-External dimensions Width 474 x Height 160 x Depth 392mm-Weight 17kg This product is an authentic product sold in Japan. Please be assured that we package each item carefully without causing damage. Shipping We send a product with careful packing. After confirm your payment, Well ship this item within 5 business days. (except for Saturday, Sunday and national holiday in JAPAN) Weekends are not available because FedEx or DHL are closed. Returns We accept return items up to 60 days after the item has arrived. If you receive a defective product, please contact us. We will bear the return shipping costs. Please buy with confidence. About us Thank you for your seeing our page. Please feel free to question if there is an uncertain point on this page. We cordially answer it. International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

DescriptionCondition : USED Thank you for looking. [Product]- LUXMAN M-06? power amplifier [Operation/condition]- Operation confirmed.- Working condition. [Appearance]- Used item for daily use.- There are scratches.* Please check the image. [Contents]- Main unit only. [Specifications]- Type: Stereo power amplifier- Power supply voltage: AC100V, 50Hz/60Hz- Power consumption: 300W- External dimensions: 444(W)x211(H)x417(D)mm- Weight: 22kg This product is an authentic product sold in Japan. Please be assured that we package each item carefully without causing damage. Shipping We send a product with careful packing. After confirm your payment, Well ship this item within 5 business days. (except for Saturday, Sunday and national holiday in JAPAN) Weekends are not available because FedEx or DHL are closed. Returns We accept return items up to 60 days after the item has arrived. If you receive a defective product, please contact us. We will bear the return shipping costs. Please buy with confidence. About us Thank you for your seeing our page. Please feel free to question if there is an uncertain point on this page. We cordially answer it. International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

BeschreibungZustand: Ist-Zustand Vielen Dank für Ihre Besichtigung. [Produkt]- LUXMAN T-300 SOLID STATE AM-FM STEREO  : Dies ist ein Luxman Stereo Tuner, der vor über einem halben Jahrhundert gekauft wurde. [Betrieb/Zustand]- Nur Stromversorgung bestätigt.- Andernfalls wird es, da der Betrieb nicht bestätigt wurde, als Trödelartikel angeboten. [Aussehen]- Auf der Oberseite des Holzrahmens befinden sich einige Kratzer.- Es gibt einige Kratzer und Schmutz. [Inhalt]- Nur Hauptgerät.*Hinweis*  : Kein Netzkabel*Bitte überprüfen Sie das Bild. [Spezifikationen]- Modell FM/AM Tuner- Außenmaße Breite 485 x Höhe 165 x Tiefe 281 mm- Gewicht 9,3 kg Dieses Produkt ist ein authentisches Produkt, das in Japan verkauft wird. Bitte seien Sie versichert, dass wir jeden Artikel sorgfältig verpacken, ohne Schäden zu verursachen. Versand Wir versenden ein Produkt mit sorgfältiger Verpackung. Nach Bestätigung Ihrer Zahlung versenden wir diesen Artikel innerhalb 5 Werktage. (außer Samstag, Sonntag und Nationalfeiertag in JAPAN) Wochenenden sind nicht verfügbar, da FedEx oder DHL geschlossen sind. Retouren Dieses Produkt wurde nicht getestet. Daher können Rücknahmen nicht akzeptiert werden. Bitte haben Sie vor dem Kauf Verständnis dafür. Über uns Vielen Dank für Ihren Besuch auf unserer Seite. Bei Unsicherheit auf dieser Seite gerne fragen. Wir beantworten es herzlich. Internationale Käufer - Bitte beachten Sie:Einfuhrzölle, Steuern und Abgaben sind nicht im Artikelpreis oder den Versandkosten enthalten. Diese Gebühren trägt der Käufer. Bitte erkundigen Sie sich vor dem Bieten oder Kaufen bei den Zollbehörden Ihres Landes, welche zusätzlichen Kosten anfallen. Vielen Dank für Ihr Verständnis.

DescriptionCondition : AS-IS Thank you for viewing. [Product]-LUXMAN T-300 SOLID STATE AM-FM STEREO : This is a Luxman stereo tuner purchased over half a century ago. [Operation/Condition]-Power supply confirmed only.-Otherwise, as operation has not been confirmed, it will be listed as a junk item. [Appearance]-There are some scratches on the top surface of the wooden frame.-There are some scratches and dirt. [Contents]-Main unit only.*Note* : No power cord*Please check the image. [Specifications]-Model FM/AM tuner-External dimensions Width 485 x Height 165 x Depth 281 mm-Weight 9.3 kg This product is an authentic product sold in Japan. Please be assured that we package each item carefully without causing damage. Shipping We send a product with careful packing. After confirm your payment, Well ship this item within 5 business days. (except for Saturday, Sunday and national holiday in JAPAN) Weekends are not available because FedEx or DHL are closed. Returns This product has not been tested. Therefore, returns cannot be accepted. Please understand this before purchasing. About us Thank you for your seeing our page. Please feel free to question if there is an uncertain point on this page. We cordially answer it. International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

DescriptionCondition : USED Condition : USED Thank you for viewing our products from among the many available. [Product] - Luxman Rare Pair of Amplifiers in Working Item ? Pre C-300 Power M-300 Japan [Contents] -Everything shown in the photo is included [Product description from the seller] -This is a very valuable model that was released in 1980 and is in working condition. [C-300]A control amplifier that incorporates Luxs own technology, allowing you to fully enjoy Lux tone. ?Duo Beta PlusX, the idea of ??proper controlEquipped with Duo Beta circuitry with appropriate NFB and DC servo and plusX with ample control due to reinforced power supply.?Excellent bare characteristics that realize ample controlCascode amplifier combined with dynamic resistance circuit.The output stage uses a pure complementary P.P. circuit.?Sound quality-oriented MC head amplifier with independent left and right power supplies. Powerful power supply and carefully selected materials, the power supply section has ample capacity, and the materials are carefully selected with an emphasis on sound quality.?Ample large capacity and relaxed control.Reinforced power supply section with twin mono configuration.?Cabinet made of natural rosewood with veneer finish. External dimensions: 478W x 163H x 384D mm Weight: 9kg List price: ¥220,000 excluding tax Condition: No problems with normal operation. Power lamp is out. Subsonic button is slightly loose. Previously cleaned inside. [M-300] A power amplifier with a solid content in a case with an elegant design typical of Lux. Continuous effective output Class A: 40W + 40W (8?) Class AB: 270W + 270W (4?) ?The idea of ??Duo Beta plusX without excess and the spirit of non-compromise Pure Class A. ?The Duo Beta circuit properly controls the NFB of the amplifier circuit to improve sound quality. ?The powerful power supply Duo Beta plusX introduces the idea of ??proper control even to the power supply circuit.? Pure Class A operation with a consistent uncompromising spiritBy closely examining the amplifiers static characteristics as well as its dynamic characteristics, we have arrived at uncompromising Class A operation. ? All-stage push-pull configuration from input to output and the use of high-speed LAPT. element provide excellent bare characteristics. ? Reinforced power supply with ample capacityA large transformer is used, with thorough control even of the winding direction. External dimensions: 478W x 484D x 214H mm Weight: 30kg List price: ¥290,000 excluding tax ConditionNormal operation without problems. When I took it for maintenance previously, the banana plug compatible speaker terminals and the tip of the power cable were replaced with higher quality ones than the original ones, and the interior was cleaned. I think it would be better to re-tighten the terminals. Please check the condition of the exterior in the photos. For specifications, I refer to Audio Retrospective. [Specifications] [C-300] Model rating Model Duo Beta plusX Stereo Control Center Output voltage Pre Out: Standard 1V, maximum 20V Rec Out: Standard 140mV, Max 20V Output impedance Pre Out:47? Rec Out: 100? Harmonic distortion rate (20Hz to 20kHz) Phono MM/MC: 0.005% or less (Rec Out: 140mV) Tuner, AUX: 0.005% or less (Pre Out: 1V) Monitor1, 2: 0.005% or less (Rec Out: 1V) Cross modulation distortion rate (60Hz:7kHz=4:1) Phono MM/MC: 0.002% or less (Rec Out: 140mV) Tuner, AUX: 0.002% or less (Pre Out: 1V) Monitor1, 2: 0.002% or less (Pre Out:1V)Frequency characteristics Phono:20Hz to 20kHz ±0.2dBTuner, AUX:0.5Hz to 140kHz -0.5dBMonitor1, 2:0.5Hz to 140kHz -0.5dBInput sensitivity (Pre Out:1V) Phono MC:0.09mVPhono MM: 2.0mVTuner, AUX: 140mVMonitor1, 2: 140mVInput impedance Phono MC: high 100?, low 50?Phono MM: MM 50k?, MC 100?Tuner, AUX: 55k?Monitor1, 2: 55k?Signal-to-noise ratio (IHF-A correction, Input short) Phono MC:-148dB/V (input conversion noise)Phono MM: 80dBTuner, AUX: 100dBMonitor 1, 2: 100dBTone control Turnover frequency shift type (for high and low frequencies)Subsonic filter 7Hz (twin T type)Accessories MC impedance switching (high, low)MM/ MCdirect Impedance Switch Tone Bypass Switch Rec Out Switch Tape Monitor 2 lines (1, 2)Tape Dubbing (1?2, 2?1)Line Phase Sensor Power Supply Voltage AC100V, 50Hz/60HzPower Consumption 25W (Electrical Appliance and Material Control Law) (Method)AC Outlet Switched: 2 systems, total 450WUnswitched: 1 system, 500WExternal dimensions Width 478 x Height 163 x Depth 384mmWeight 9kg [M-300] Model rating Model Duo Beta plusX power amplifierContinuous effective output(20Hz to 20kHz, both channels operating simultaneously)Class A: 40W+40W (8?)Class AB: 270W+270W (4?)170W+170W (8?)Total harmonic distortion (8?,20Hz to 20kHz, -3dB)Class A: 0.005% or lessClass AB: 0.005% or lessIntermodulation distortion (8?,60Hz:7kHz?4:1, -3dB)Class A: 0.005% or lessClass AB: 0.005% or lessOutput bandwidth Class A: 10Hz to 100kHz -3dB (distortion rate 0.015%)Class AB: 10Hz to 100kHz -3dB (distortion rate 0.04%)Frequency characteristics 10hz to 100kHz -1dB (both Class A and Class AB)Input sensitivity Class A: 0.45VClass AB: 1VInput impedance 50k? (both Class A and Class AB)Signal-to-noise ratio (IHF-A weighted) Class A: 115dBClass AB: 120dBResidual noise (IHF-A weighted) 30?V (both Class A and Class AB)Damping factor 120 (1kHz, 8?, Class A and Class AB)Protection circuit DC drift detection speaker protection circuitOvercurrent detection Amplifier protection circuitAccessories Circuit operation switch (indicator)Peak indicatorInput attenuatorHeadphone jackSpeaker OFF switch (indicator)Line phase sensorPower supply voltage AC100V, 50Hz/60HzPower consumption (Electrical Appliances and Materials Control Law) Class A: 420WClass AB: 430WExternal dimensions Width 478 x Height 214 x Depth 484mmWeight 30kg This product is an authentic product sold in Japan. Please be assured that we package each item carefully without causing damage. Shipping We send a product with careful packing. After confirm your payment, Well ship this item within 5 business days. (except for Saturday, Sunday and national holiday in JAPAN) Weekends are not available because FedEx or DHL are closed. Returns We accept return items up to 60 days after the item has arrived. If you receive a defective product, please contact us. We will bear the return shipping costs. Please buy with confidence. About us Thank you for your seeing our page. Please feel free to question if there is an uncertain point on this page. We cordially answer it. International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

Item Description Condition is very good. Since it is a used item, it is in good condition overall, although there are some damages and stains. I have damaged the aluminum panel and wooden frame, and I am replacing them with the panel and wooden frame of PD121A. Therefore, the logo on the main aluminum panel is PD121A. As shown in the photos, it is very clean. The main unit is PD131. I also purchased an acrylic cover as a spare and have replaced it, so the acrylic cover is very clean. The arm is SME 3009 S2 Improved. There is no cartridge. It supports 50 or 60HZ, but depending on your region (power environment), you may need to adjust the speed (adjuster). Shipping Handling time: Approximately 5-10 business days. Shipping method: Expedited shipping (FedEx /DHL /EMS): It will arrive approximately 4 days after shipment (to US), depending on the location. You can know the delivery status in detail.The method available depends on the status of the airmail.Shipping is only available at addresses registered with eBay. Please note that addresses that are not registered with eBay cannot be shipped. International Buyers - Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

DescriptionCondition : UsedThere are lots of scratches. Manufacturer : Line ControllerModel number : AT-3000Dimensions : W250×H111×D345mmWeight : 5.9kg The Luxman AT-3000 is a line controller that uses a 23-step transformer type attenuator for level control. It is sometimes called a “passive preamplifier. While most attenuators usually use the attenuation characteristics of a resistor, the AT-3000 uses a newly developed line signal transformer for the attenuator. Twenty-three steps are taken from the transformers secondary winding, and each level is switched by means of a high-precision rotary switch, thereby completely eliminating resistive elements and reducing the DC resistance. The transformer for the attenuator uses 0.2mm nickel super Permalloy material in a multi-layered structure, and employs original technology in the way the intermediate taps on the windings are taken out. This has resulted in a high-purity transformer for line signals.Shipping We are going to ship by FedEX or DHL or Japan post. Buyer cannot choose the shipping carrier. Economy shipping does not include a tracking number. Economy shipping is 11 to 23 days from ship date to arrival. Standard shipping is 5 to 10 days from ship date to arrival. Expedited shipping is 1 to 4 days from ship date to arrival.International Buyers - Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Note on voltage:With the exception of some devices such as USB power supplies, most Japanese electronic devices have a voltage of 100V and an A plug adapter. In order for you to use this device outside Japan where the voltage is higher than 100V such as 200V-240V, you are required to use a transformer to adjust the voltage to your local country. Without using a transformer and plug adaptor, this device may be broken. Please purchase these devices in your local store.Products with low power consumption can operate at 120V in the U.S. and other countries without problems.

Owners Manual guide for Luxman  in English Operating instructions in perfect and permissible reproduction of the original   Owners Manual is not original but faultless and permitted reproduction from OriginalLegal notice: We are approved as a placement service and authorized to reproduce this manual.The business registration and approvals from the rights holders/manufacturers are available. If you have any questions or are looking for a manual that is not listed in our shop, we are always at your disposal. By all means take me in yours favorites on!Have fun and good luck with the repair!!!Owners Manual guide for Luxman    in English   Operating instructions in perfect and permissible reproduction of the original    Owners Manual is not original but faultless and permitted reproduction from Original Legal notice:   We are approved as a placement service and authorized to reproduce this manual. The business registration and approvals from the rights holders/manufacturers are available.   If you have any questions or are looking for a manual that is not listed in our shop, we are always at your disposal.   By all means take me in yours favorites on! Have fun and good luck with the repair!!!Owners Manual guide for Luxman    in English   Operating instructions in perfect and permissible reproduction of the original    Owners Manual is not original but faultless and permitted reproduction from Original Legal notice:   We are approved as a placement service and authorized to reproduce this manual. The business registration and approvals from the rights holders/manufacturers are available.   If you have any questions or are looking for a manual that is not listed in our shop, we are always at your disposal.   By all means take me in yours favorites on! Have fun and good luck with the repair!!!

????PRODUCTS???? Please check the Photo [Product]LuxmanRecord PlayerTurntableArm Set [Operation] Operation has been confirmed at the time of acquisition. [Condition]Slight scratches present.The needle is slightly bent but playback is functioning without issues. It appears to have an ANT-120Ea attached.One grounding wire is about to break, so please repair it if necessary. (See image 10 for details.) [Accessories] Everything in the images is included. There may be subtle damages that are difficult to notice. Please understand this in advance, and refrain from purchasing if you are particularly sensitive to imperfections. ????PAYMENTS???? We accept PayPal and all major Debit / Credit Cards. We can only ship your item after your payment clears. We ship within 10 days of payment.????CHECKOUT???? Please check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed.????SHIPPING???? Packages:Box and Bubblerup Packages usually leave our warehouse within 10 days of payment. Weekend orders will ship on Monday or Tuesday. We provide valid Tracking Numbers for all orders.????International Packages:???? We ship to all US Territories, Europe and Asia and Middle East and Australia and Canada including Guam and Hawaii. All our international packages ship under the Fedex and Japan Post.????CUSTOMER SERVICE???? If you have any questions or issues, we are at your service. You can email us anytime through eBay messages.????RETURN INFORMATION???? We offer a standard FREE 30 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund.????Customs duty???? Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. We will reply to your question or invoice within 3 days. We cant not reply gifts or unreasonable requests such as declared amount.

LUXMAN PD121 RECORD PLAYER SME 3009 S2 IMPROVED INSTALLED MAINTAINED TURNTABLES Description ?? Condition: Used Please confirm the condition by reviewing the images carefully. ?? LUXMAN PD121 Record Player with SME 3009 S2 Improved Installed - Maintained and Adjusted by Us The PD121, released around 1975, is a turntable without an arm. This unit has been set up with the SME 3009 S2 Improved. Its stylish design, which shows little sign of aging, catches the eye. The well-balanced design and ease of use continue to make it a popular and beloved model among enthusiasts. ?Condition: Each part has been polished and cleaned. The dust cover has been polished with a special polishing agent based on the level of scratches, and a finishing gloss has been applied to enhance transparency. The platter and metal parts have been polished to remove as much dirt and rust as possible. The cover has no major scratches, retains its transparency, and looks clean. The button section also has a glossy finish and is in good condition. The platter has a slight amount of metal tarnishing but still has a glossy appearance. The rubber mat shows some signs of use on the surface fabric, but it is soft, with no signs of deterioration or warping. The top plate shows no significant damage and has a glossy, good condition. There is some tarnishing on the black body at the bottom, but no noticeable scratches. All four insulators are functioning properly, and the hinges are undamaged, holding the lid open securely. The arm has a glossy finish and looks clean. The rubber mat shows signs of use, but overall the condition is good. Considering its age, we classify this item as being in good condition. Please note that this is a used item that has aged over time. We ask that you bid with the understanding that there may be minor scratches, scuffs, or signs of use due to aging or previous usage. Our condition checks are based on the specific criteria set by our company, which specializes in vintage audio equipment, and are conducted by our staff. However, please note that individual perceptions of condition may vary, and there may be differences from your standards. Please carefully check the images provided and make your judgment. If you have any questions about the condition, feel free to contact us. ?Operation For this sale, we have performed comprehensive maintenance. We have replaced worn electronic parts (such as electrolytic capacitors) and made various adjustments. The unit is in a condition where it can be used with confidence. Operation: Good Operates smoothly without any unusual noises, and rotation stability has been confirmed with a stroboscope. Fine adjustments can be made with the rotation adjustment knob. The start/stop responses are functioning properly in conjunction with the ON/OFF button. The strobe light works without any issues. This unit supports both 50/60Hz frequencies. Operation: Good Outputs good sound from both left and right channels. The lifter lever operates smoothly (oil has been replenished). Anti-skating and tracking force adjustments are functioning well. The tonearm height is adjustable. All of the above operations are functioning properly, and the unit is in good working condition. We conduct thorough product checks, but in the event of an initial operational defect, we will offer free repairs, returns, or refunds within one week of receipt. Please rest assured that in the case of a defect, we will cover the return shipping costs. For returns due to reasons other than an initial operational defect, please understand that the return shipping cost will be borne by the buyer. Once we receive the returned item, we will check its condition and issue a refund. ?Product Details Manufacturer: LUXMAN Model: PD121 ?Set Contents Turntable Unit LUXMAN PD121 Dust Cover Rubber Mat Tonearm SME 3009 S2 Improved (pre-installed) Main Weight / Tracking Force Adjustment Weight Inside Force Canceller Weight User Manual (copy for PD121) User Manual (copy for 3009 S2 Improved) Alignment Protractor / Mounting Template (copy) SME Cable (pre-installed) Please note that the record used for photography, head shell, and cartridge are not included. Please confirm that all items visible in the photos, aside from our company’s background items, are included. ?? Please feel free to ask any questions. We will respond within 48 hours. The product description may use automatic translation by AI. There may be some minor translation errors or unnatural parts. If any questions arise due to this, please be sure to ask before making a purchase. We will make every effort to address any questions before the purchase. Shipping ?? Items would generally be dispatched within 6 working days. ?? Most items will be shipped using FeDex, DHL or UPS which is reliable and arrives quickly. ?? Please note that for special items, or depending on the destination country, different shipping methods may be used. ?? Depending on the country, certain items such as watches and sunglasses may experience delays during customs clearance. Please be aware of this in advance. ?? As liquids are difficult to export, ink will not be included with pens, etc. Even if there are ink bottles in the images, the contents will be removed before shipping. International Buyers - Please Note: ?? Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. ?? Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. ?? These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. ?? The customs declaration amount will be based on the selling price on eBay. It is illegal to underdeclare the declared amount, a practice commonly referred to as undervaluing, so it must not be done under any circumstances. Similarly, declaring items as gifts is also not permitted.

Service Manual guide for Luxman  (schematics, settings... - what you need to repair a device) Repair instructions in perfect and legal reproduction of the original   Service Manual for Repair of Items is not original but faultless and permitted reproduction from OriginalLegal notice: We are approved as a placement service and authorized to reproduce this manual.The business registration and approvals from the rights holders/manufacturers are available. If you have any questions or are looking for a manual that is not listed in our shop, we are always at your disposal. By all means take me in yours favorites on!Have fun and good luck with the repair!!!Service Manual guide for Luxman    (schematics, settings... - what you need to repair a device)   Repair instructions in perfect and legal reproduction of the original    Service Manual for Repair of Items is not original but faultless and permitted reproduction from Original Legal notice:   We are approved as a placement service and authorized to reproduce this manual. The business registration and approvals from the rights holders/manufacturers are available.   If you have any questions or are looking for a manual that is not listed in our shop, we are always at your disposal.   By all means take me in yours favorites on! Have fun and good luck with the repair!!!Service Manual guide for Luxman    (schematics, settings... - what you need to repair a device)   Repair instructions in perfect and legal reproduction of the original    Service Manual for Repair of Items is not original but faultless and permitted reproduction from Original Legal notice:   We are approved as a placement service and authorized to reproduce this manual. The business registration and approvals from the rights holders/manufacturers are available.   If you have any questions or are looking for a manual that is not listed in our shop, we are always at your disposal.   By all means take me in yours favorites on! Have fun and good luck with the repair!!!

????Including & Condition Details: As shown in photos. ????Shipping: FedEx ?Product Description? ?Tannoy Autograph Mini Prestige pair speaker system. It was stored in a condition closer to new, so I think you will be satisfied with it. ?Product Condition? ?Operation confirmed ?Fully functional ?Used only a few times and stored in a dark room. Very clean, almost unused. No scratches, scuffs, or dirt. ?Maintenance items??Simple cleaning with alcohol.?Alcohol disinfection will be done before shipping. ?Accessories??Main unit?Instruction manual?Original box?Warranty card (Can not be used; Only for collection) ?Serial number?Postcard ????Message from SellerHi, my name is Danny Chou. I live in Tokyo, Japan. I can speak quite fluent English :)I can source anything you want from Japan! Feel free to contact me anytime! ??Check Your AddressPlease check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed. ??Tracking & PackingPackages: Box or envelope and Bubble wrapWe provide valid Tracking Numbers for all orders.All our international packages will be shipped by FedEx or DHL. ??ReturnWe offer a standard FREE 60 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund. ????Customs DutyImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

DescriptionGrade : Used Operation confirmed. There are some scratches. All my products are 100% Authentic.Payment We usually ship within 5 business days of receiving cleared payment. Shipping We ship using FedEx, DHL.International Buyers - Please Note: Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer?s responsibility.Please check with your country?s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior. We do not undervalue (i.e., ship as a gift or greeting card). Buyer is responsible for payment of customs duties. No refunds will be made for refusal to pay customs duties.

????Including & Condition Details: As shown in photos. LUXMAN TF-MT PD300/PD310/PD350 genuine arm base ?Condition There is no noticeable major damage and it has a glossy appearance. ?Product contents Manufacturer: LUXMAN Model number: TF-MT External size: Diameter approx. 128mm x thickness 7mm Arm mounting part: approx. 30mm Fits for LUXMAN PD300, PD310, PD350 genuine short arm. ?Compatible Arms: STAX: UA-7, UA-3, UA-9 GRACE: G-704, G-714 MICRO: MA-505, MA-707X, MA-303, etc. FR: FR-64, FR-64S, FR-14 ortofon: RMG-212 SAEC: WE-308, WE-407/23 audio-technica: AT-1503III, AT-1100 ????Shipping: FedEx ????Message from SellerHi, my name is Danny Chou. I live in Tokyo, Japan. I can speak quite fluent English :)I can source anything you want from Japan! Feel free to contact me anytime! ??Check Your AddressPlease check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed. ??Tracking & PackingPackages: Box or envelope and Bubble wrapWe provide valid Tracking Numbers for all orders.All our international packages will be shipped by FedEx or DHL. ??ReturnWe offer a standard FREE 60 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund. ????Customs DutyImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

LUXMAN MQ-300 Vacuum tube Stereo Power Amplifier AC100V From JapanDescriptionThis is a single vacuum tube stereo power amplifier with 8W + 8W output, equipped with the TA-300B directly heated triode. It has a simple configuration of a voltage amplification block with two parallel connected 6SN7GTBs and a single 300B power block connected with Luxmans original oil capacitor, and by making the whole unit non-feedback, it achieves a natural and musical tone that makes the most of the characteristics of the 300B rather than numerically high output or high-fidelity performance. It also features a top panel made of 12mm thick aluminum material, large gradient cast iron insulator legs that support the entire chassis, a large-capacity output transformer made of Orient core material with a design reminiscent of the old OY transformer, and a choke coil made of Finemet core material. ?Continuous output: 8W+8W (4, 8, 16?) ?Input sensitivity / Input impedance: 490mV (8W) / 240k??Frequency response: 20Hz to 20kHz (+0.3, -1.5dB), 10Hz to 30kHz (+0.3, -3.0dB)?Total harmonic distortion / S/N ratio (IHF-A): 1% or less (1kHz/8?/1W) / 105dB ?Input / Output: 1 line / 1 large speaker terminal (4, 8, 16? independent)?Circuit type: Driver: Parallel connection 2-stage amplification, Output: Single configuration, Overall: Non-feedback amplification?Vacuum tubes used: 5AR4 (SOVTEK) x 2, 6SN7GTB (TUNG-SOL) x 4, TA-300B (Takatsuki Electric Industry) x 2?Accessories: [Front panel] Power switch [Rear panel] Input terminal, speaker terminal (4, 8, 16? independent), AC inlet?Power consumption: 160W (Electrical Appliance and Material Safety Act), 160W (no signal) AccessoriesInstruction manual (copy), power cable, original box Size W (width): 460 mmH (height): 237 mmD (depth): 340 mmWeight 29 kgShippingWe will ship the item by FedEx, DHL, UPS, Japan Post (EMS/Airmail) and provide the tracking number. Shipping is only available to the address registered.Please note that any address not registered is not acceptable to ship. Shipping is possible from Monday to Friday.Saturdays, Sundays, and Japanese holidays are not available because the transportation company is closed.International Buyers - Please Note:Import duties and taxes are not included in the item price or shipping cost. Please check with your country’s customs office to determine these additional costs prior to bidding or buying. Additionally, if the delivery address is in a remote area, there may be additional charges by FedEx or DHL. If such charges occur, you may be asked to pay an additional $15 to $20.