Offered for your consideration is one (1) vintage YAMAHA model number JA0518 1½ inch (38mm) soft dome tweeter removed from my NS-10M two-way monitor speakers, manufactured in Japan c.1988. This is the same tweeter used in the NS-10, NS-615, and possibly other high-end YAMAHA speakers, but buyer is responsible for verifying its suitability for any model other than the NS-10M. So, please have a look at the large photos I’ve taken and read the remaining description to decide if this superlative YAMAHA high frequency driver is correct for your needs. This YAMAHA tweeter is in clean, excellent overall condition. The soft textile dome is in flawless shape, well-protected under the acoustically transparent metal screen. Plus, the thick plastic faceplate is also in great shape with no cracks or scratches, just a few light handling marks from the years, and the huge ceramic magnet is free of chips or oxidation. YAMAHA soldered all driver connections in the NS-10M, so I’ve left a few inches of the +/- wires attached to the terminals for the new owner’s convenience when splicing-in to their speaker. Overall, this exceptionally well-preserved high frequency driver is practically indistinguishable from new! Most importantly, the tweeter has been fully tested and sounds great—strong and clear output up to a sparkly, beyond-audibility 20kHz upper limit. And, I tested its DC resistance at 6.3-6.4?, consistent with a nominal 8 ohm driver rating. Lastly, the faceplate measures 3?” square, it stands about 2” tall (including the grille), and the mount holes are spaced 2?” adjacent / 4?” diagonal apart, c-t-c. This is a nice find for somebody with a blown or damaged tweeter in their NS-10M or other suitable model and will have your cherished speakers sounding their finest once again! As pictured and described, this splendid example of the coveted YAMAHA JA0518 soft dome tweeter is offered at a competitive price. Terms of Sale: I encourage interested parties to ask any questions they may have about this listing before committing to purchase. Payment is due at checkout by PayPal or other accepted methods. U.S. mailing addresses will pay $11.95 for very carefully packed shipping via U.S. Postal Service, FedEx, or UPS with tracking, delivery confirmation, and insurance. International purchases accepted only from those who are able to pay with PayPal, including shipping by U.S. Postal Service First Class Parcel Air Mail. Thanks for looking! *the cabinet decal photo is presented only for donor model reference

Offered for your consideration is a pair of YAMAHA two-way crossover networks removed from my NS-10M two-way monitor speakers. These crossovers were also used in the NS-615 and possibly other high-end YAMAHA two-way speakers. They were used to divide the JA-1801 7” woofers from the JA0518 1½” soft dome tweeters, both 8? nominal, at 2kHz. So, please see the large photos I’ve taken and read the remaining description to decide if these superb YAMAHA crossovers are correct for your needs. These YAMAHA NS-10M crossovers are in clean, excellent condition. There are no faceplate scratches, just a few tiny scuffs, and no cracks at the mount holes. Plus, the sturdy, steel reinforced +/- terminals have no issues and hold speaker cable very tight. As you may know, YAMAHA soldered all of the NS-10M driver connections, so I left a few inches of +/- wire attached to the woofer/tweeter terminals for the new owner’s convenience when splicing-in my replacement driver(s) to their speaker(s). Consequently, the woofer and tweeter wires are shorter than factory length on these crossovers and will need to be lengthened (or replaced) for use in NS-10M cabinets. The crossovers were tested in the NS-10M cabinets with original drivers and worked perfectly. They’re constructed of heavily wound copper inductors, resistors, and two large capacitors. Lastly, the plates measure 4¼” wide x 5?” high, not including upper and lower protruding lobes. They’re mounted from behind the rear panel so only the black center with terminals part is exposed. It requires a roughly 2?” x 3½” cutout if considering them for a speaker building project. So, if a crossover(s) on your NS-10M’s, or other suitable speakers, isn’t working well, has a broken input terminal(s), etc., you’ve found the right listing—these crossovers will have your cherished monitor speakers back in action! As pictured and described, this pair of YAMAHA NS-10M two-way crossovers is offered at a competitive price. Terms of Sale: I encourage interested parties to ask any questions they may have about this listing before committing to purchase. Payment is due at checkout by PayPal or other accepted methods. U.S. mailing addresses will pay $12.95 for very carefully packed shipping via U.S. Postal Service, FedEx, or UPS with tracking and delivery confirmation. International purchases accepted only from those who are able to pay with PayPal, including shipping by U.S. Postal Service First Class Parcel Air Mail. Thanks for looking! *the cabinet sticker photo is presented only for donor model reference

Offered for your consideration is a YAMAHA speaker grille with emblem removed from my NS-10M two-way monitor speakers, manufactured in Japan c.1988. Please see the large photos I’ve taken, the measurements, and read the remaining description to decide if this outstanding YAMAHA speaker grille is correct for your needs. *Although the listing is written in the singular to avoid any confusion, two (2) identical YAMAHA NS-10M grille panels are available. Please choose if you’d like to buy one or both in the quantity field at the top of the listing. The shipping cost will be automatically calculated by eBay checkout. This YAMAHA NS-10M grille is in clean, excellent condition. It measures 15” by 8?”. The fabric looks great with no holes, runs, or stains. Plus, sturdy plywood frame has no flaws and the mount studs—wiggly by design so they won’t break—are all present. Also, the YAMAHA emblem is also in great shape. Unlike so many grilles on NS-10M’s that have seen hard use, this one is exceptionally well-preserved. As pictured and described, this YAMAHA NS-10M speaker grille panel is offered at a competitive price. Terms of Sale: I encourage interested parties to ask any questions they may have about this listing before committing to purchase. Payment is due at checkout by PayPal or other accepted methods. U.S. mailing addresses will pay $9.95 for very carefully packed shipping via U.S. Postal Service, FedEx, or UPS with tracking and delivery confirmation. International purchases accepted only from those who are able to pay with PayPal, including shipping by U.S. Postal Service First Class Parcel Air Mail. Thanks for looking! *the cabinet decal photo is presented only for donor model reference

Yamaha NS-10M hochwertige Studio Monitor Lautsprecherboxen Optisch im guten Zustand, Gebrauchsspuren und Kratzerchen am Holzgehäuse, siehe Bilder. bei einem Lautsprecher ist ein Loch in der Papiermembran, kann man bestimmt bekleben, klanglich trotzdem prima Funktion einwandfrei, prima Klang! : ) Bitte beachten Sie die Bilder, diese sind Teil der Artikelbeschreibung. Lieferumfang wie abgebildet ohne weiteres Zubehör Versandkosten beziehen sich auf den Versand innerhalb Deutschlands Internationale Versandkosten bitte vor dem Kauf erfragen! Worldwide Shipping!

Offered for your consideration is a pair of YAMAHA two-way crossover networks removed from my NS-10M two-way monitor speakers. These crossovers were also used in the NS-615 and possibly other high-end YAMAHA two-way speakers. They were used to divide the JA-1801 7” woofers from the JA0518 1½” soft dome tweeters, both 8? nominal, at 2kHz. So, please see the large photos I’ve taken and read the remaining description to decide if these superb YAMAHA crossovers are correct for your needs. These YAMAHA NS-10M crossovers are in clean, excellent condition. There are no faceplate scratches, just a few tiny scuffs, and no cracks at the mount holes. Plus, the sturdy, steel reinforced +/- terminals have no issues and hold speaker cable very tight. As you may know, YAMAHA soldered all of the NS-10M driver connections, so I left a few inches of +/- wire attached to the woofer/tweeter terminals for the new owner’s convenience when splicing-in my replacement driver(s) to their speaker(s). Consequently, the woofer and tweeter wires are shorter than factory length on these crossovers and will need to be lengthened (or replaced) for use in NS-10M cabinets. The crossovers were tested in the NS-10M cabinets with original drivers and worked perfectly. They’re constructed of heavily wound copper inductors, resistors, and two large capacitors. Lastly, the plates measure 4¼” wide x 5?” high, not including upper and lower protruding lobes. They’re mounted from behind the rear panel so only the black center with terminals part is exposed. It requires a roughly 2?” x 3½” cutout if considering them for a speaker building project. So, if a crossover(s) on your NS-10M’s, or other suitable speakers, isn’t working well, has a broken input terminal(s), etc., you’ve found the right listing—these crossovers will have your cherished monitor speakers back in action! As pictured and described, this pair of YAMAHA NS-10M two-way crossovers is offered at a competitive price. Terms of Sale: I encourage interested parties to ask any questions they may have about this listing before committing to purchase. Payment is due at checkout by PayPal or other accepted methods. U.S. mailing addresses will pay $12.95 for very carefully packed shipping via U.S. Postal Service, FedEx, or UPS with tracking and delivery confirmation. International purchases accepted only from those who are able to pay with PayPal, including shipping by U.S. Postal Service First Class Parcel Air Mail. Thanks for looking! *the cabinet sticker photo is presented only for donor model reference

Offered for your consideration is one (1) vintage YAMAHA model number JA-1801 7 inch (18cm) woofer removed from my NS-10M two-way monitor speakers, manufactured in Japan c.1988. This is the same quality mid/bass driver also used in the NS-10, NS-615, and possibly other high-end YAMAHA speakers, but buyer is responsible for verifying its suitability for any model other than NS-10M. So, please have a look at the large photos I’ve taken and read the remaining description to decide if this outstanding YAMAHA woofer is correct for your needs. This YAMAHA JA-1801 woofer is in clean, excellent condition. The sturdy seamed white paper cone is in perfect shape with no cracks, stains, or yellowing, and the voice coil dustcap is dimple-free perfect as pictured! Plus, the surround is permanent textile, factory-coated for extra strength and durability, instead of the fragile foam widely used by most companies in the 1980’s. And, the black anodized steel basket is in nice condition with no dings, scratches, or oxidation noted. YAMAHA soldered all driver connections, so I’ve left a few inches of the +/- wires attached to the terminals for the new owner’s convenience when splicing-in to their speaker. Overall, this capable YAMAHA woofer is exceptionally well-preserved! More importantly, it’s been fully tested and sounds terrific—very strong and clear with fast, detailed midrange and stout bass response for the platform size. Plus, I tested its DC resistance at 6.7-6.9?, consistent with a nominal 8 ohm driver rating. Lastly, the basket measures just over 7” square (8¼” at truncated corners), it stands 3?” tall, and the mounting holes are spaced 5?” adjacent / 7½” diagonal apart, c-t-c. So, if you have a blown or damaged woofer in your YAMAHA NS-10M, or other suitable model, this is a nice find—your cherished monitor speakers will be sounding their finest once again in no time! As pictured and described, this splendid YAMAHA JA-1801 7” woofer is offered at a competitive price. Terms of Sale: I encourage interested parties to ask any questions they may have about this listing before committing to purchase. Payment is due at checkout by PayPal or other accepted methods. U.S. mailing addresses will pay $16.95 for very carefully packed shipping via U.S. Postal Service, FedEx, or UPS with tracking, delivery confirmation, and insurance. International purchases accepted only from those who are able to pay with PayPal or other accepted forms, including shipping by U.S. Postal Service Global Priority Air Mail. Thanks for looking! *the cabinet sticker photo is presented only for donor model reference

Offered for your consideration is a YAMAHA model number JA0518 1½ inch (38mm) soft dome tweeter removed from my NS-10M two-way monitor speakers, manufactured in Japan c.1988. This is the same tweeter used in the NS-10, NS-615, and possibly other high-end YAMAHA speakers, but buyer is responsible for verifying its suitability for any model other than the NS-10M. So, please have a look at the large photos I’ve taken and read the remaining description to decide if this superlative high frequency driver is correct for your needs. *Although the listing is written in the singular to avoid any confusion, two (2) identical YAMAHA JA0518 tweeters are available. Please choose if you’d like to buy one or both in the quantity field at the top of the listing. The shipping cost will be automatically calculated by eBay checkout. This YAMAHA tweeter is in clean, excellent overall condition. The soft textile dome is in flawless shape, well-protected under the acoustically transparent metal screen. Plus, the thick plastic faceplate is also in great shape with no cracks or scratches, just a few light handling marks from the years, and the huge ceramic magnet is free of chips or oxidation. YAMAHA soldered all driver connections in the NS-10M, so I’ve left a few inches of the +/- wires attached to the terminals for the new owner’s convenience when splicing-in to their speaker. Overall, this exceptionally well-preserved high frequency driver is practically indistinguishable from new! Most importantly, the tweeter has been fully tested and sounds great—strong and clear output up to a sparkly, beyond-audibility 20kHz upper limit. And, I tested its DC resistance at 6.3-6.4?, consistent with a nominal 8 ohm driver rating. Lastly, the faceplate measures 3?” square, it stands about 2” tall (including the grille), and the mount holes are spaced 2?” adjacent / 4?” diagonal apart, c-t-c. This is a nice find for somebody with a blown or damaged tweeter in their NS-10M or other suitable model and will have your cherished speakers sounding their finest once again! As pictured and described, this splendid example of the coveted YAMAHA JA0518 soft dome tweeter is offered at a competitive price. Terms of Sale: I encourage interested parties to ask any questions they may have about this listing before committing to purchase. Payment is due at checkout by PayPal or other accepted methods. U.S. mailing addresses will pay $11.95 for very carefully packed shipping via U.S. Postal Service, FedEx, or UPS with tracking, delivery confirmation, and insurance. International purchases accepted only from those who are able to pay with PayPal, including shipping by U.S. Postal Service First Class Parcel Air Mail. Thanks for looking! *the cabinet decal photo is presented only for donor model reference

elles fonctionnent mais l état esthétique est a améliorer elles ont ete testée mais regardez bien les photos il manque des vis , il faut changer une vis arriere pour le fil mais çà empeche pas le fonctionnement ce sont des enceintes qui sont assez chers normalement mais a cause de l etat , je vais les mettre a la moitié du prix de ce qu elle se revende sur ce site

elles fonctionnent mais l état esthétique est a améliorer elles ont ete testée mais regardez bien les photos il manque des vis , il faut changer une vis arriere pour le fil mais çà empeche pas le fonctionnement ce sont des enceintes qui sont assez chers normalement mais a cause de l etat , je vais les mettre a la moitié du prix de ce qu elle se revende sur ce site

elles fonctionnent mais l état esthétique est a améliorer elles ont ete testée mais regardez bien les photos il manque des vis , il faut changer une vis arriere pour le fil mais çà empeche pas le fonctionnement ce sont des enceintes qui sont assez chers normalement mais a cause de l etat , je vais les mettre a la moitié du prix de ce qu elle se revende sur ce site

elles fonctionnent mais l état esthétique est a améliorer elles ont ete testée mais regardez bien les photos il manque des vis , il faut changer une vis arriere pour le fil mais çà empeche pas le fonctionnement ce sont des enceintes qui sont assez chers normalement mais a cause de l etat , je vais les mettre a la moitié du prix de ce qu elle se revende sur ce site

elles fonctionnent mais l état esthétique est a améliorer elles ont ete testée mais regardez bien les photos il manque des vis , il faut changer une vis arriere pour le fil mais çà empeche pas le fonctionnement ce sont des enceintes qui sont assez chers normalement mais a cause de l etat , je vais les mettre a la moitié du prix de ce qu elle se revende sur ce site

Good original Yamaha NS-10M tweeter tested working perfectly