35 Valve tubes. Various. Mainly Mullard. 6 x PL802. PCF802. DL94. EZ81. VLS631 CV138, CV261, CV286. Some markings rubbed off, but look the same as others. Found in Father-in-laws garage. Not tested.

Mullard DY802. EHT Rectifier. Will be carefully packed for delivery.

Vintage Tungsram Mullard radio valve DY802. The box has been opened but it appears to be unused. Please see photos.

25 Valve tubes. Various. Mainly Mullard. 6 x PL802. PCF802. DL94. EZ81. VLS631.. etc. Some not named. Father-in-laws garage clearance. Not tested. I think they are television tubes?

  TUBE HUNTER VACUUM TUBE GEMS THESE ARE THE SPECIFICS OF THE TUBE/TUBES/PARTS FOR SALE THESE ARE THE TUBE/TUBES/PARTS FOR SALE:  MANUFACTURER:     MULLARD PRODUCTION CITY:                                     USA TUBE TYPE:   6LX8 LCF80 DESIGNATION:                                             PREAMP TUBE YEAR:     VARIES MONTH:     VARIES Date code match    SINGLE SILK SCREEN CONDITION %:                    100% MICA:    2 PLATES:    GREY GM %:     120% SINGLE/PAIR/QUAD/MULTI:     SINGLE GETTER:                                                          0  GETTER                                      DATE:      VARIES NOS NIB. This auction is for ONE TUBE. You will receive one of these tubes. All are NOS NIB and tested by by me.   THESE TUBES ARE NOS NIB. Normal 0 false false false EN-US X-NONE X-NONE On my tester a B&K 747 tester:    Below 55 = BAD      55-65 = ?     65 -100 = Good     100-120+ = NOS   *********************************************************************************** IMPORTANT NOTE ON FILLING ORDERS With NOS tubes we will substitute NOS American tubes with NOS American of a different brand to fill an order if we are short the brand listed. If you are brand sensitive let me know BEFORE you order.  NOTES ON PHOTO PROPS:  THE RCA DOG, PHONOGRAPH, REDDY KILLOWATT, AND OTHER STATUETTES, INCLUDING DEVICES TO MAKE TUBES OR OTHER PARTS STAND UP STRAIGHT, ARE NOT PART OF THE SALE. THIS IS TRUE OF ANY PROPS USED IN PHOTOGRAPHY IN THE LISTING THAT ARE NOT SPECIFICALLY CALLED OUT IN THE LISTING AS ITEMS FOR SALE. NOTES ON PHOTOS FOR SINGLE TUBES: IF YOU ARE BUYING A SINGLE TUBE: FOR THE MOST PART WITH TUBES UNDER 15 DOLLARS WE ARE USING STOCK PHOTOS FOR SINGLES. YOUR MILEAGE MAY VARY. YOU WILL RECEIVE A NEW TUBE. IT WILL TEST NOS. IT MAY OR MAY NOT BE ONE OF THE ONES IN THE PICTURE. WE GET TUBES IN ALL THE TIME. WITH SINGLES OF A LOW VALUE WE ARE NOT PICKY ABOUT DATES AND CONSTRUCTION AND THINGS LIKE THAT. WE ALSO MAY SUBSTITUE A TUBE BY A DIFFERENT MANUFACTOR IF WE ARE LOW ON STOCK OF THAT BRAND SUCH AS AN RCA FOR A GE FOR EXAMPLE, BUT WE WILL NOT SEND A JAPANESE BRAND FOR A USA MADE TUBE, OR A LOWER QUALITY TUBE IN ANY WAY. IF WE ARE SELLING A PAIR, OR A HIGH VALUE SINGLE THEN WE GET SERIOUS ABOUT SUCH THINGS.  NOTES ON MATCHING: 1. TRIODES SIMILAR TO 12AX7 ARE DONE ON A TEKTRONIX 576 CURVE TRACER IF I HAVE MATCHED THEM WITH THIS MACHINE I GUARANTEE THAT THESE MATCHED PAIRS WILL BE NOT BE ABLE TO DIFFERENTIATED WITH THE HUMAN EAR IN A PREAMP CIRCUIT.  2. ON OTHER TUBE I USE A CALIBRATED HICKOK 600A TO MATCH TUBES. 3. ON MODERN TUBES, FOR WHICH THE 600A CANNOT PERFORM TESTS, I USE THE CALIBRATED B&K 747B TUBE TESTER. NOTES ON THE BOXES. LISTING WILL GENERALLY HAVE INFORMATION ABOUT ANY BOXES ASSOCIATED WITH THE TUBES FOR SALE. THESE ARE THE OPTIONS: 1. ORIGINAL BOXES IN VARYING CONDITION. THESE BOXES WILL BE THE ORIGINAL BOXES THE TUBES CAME IN AND WILL SHOW AGING IN VARYING DEGREES. THESE TUBES ARE ASSUMED TO BE NEW AND WILL TEST AS NOS. 2. NO BOXES PROVIDED (NONE AVAILABLE USUALLY USED AND SHOULD BE ASSUMED TO BE USED UNLESS OTHERWISE STATED. 3. REPURPOSED BOXES. THESE ARE BOXES OF THE SAME MANUFACTURER. THESE WILL HAVE A LABEL OVER THE TUBE NUMBER THAT REFLECTS THE TUBE BEING SOLD. THESE TUBES SHOULD BE ASSUMED TO BE USED UNLESS OTHERWISE STATED. 4. TUBEHUNTER BOXES. THESE ARE BOXES I HAVE MADE WITH GREAT TIME AND EXPENSE TO PROTECT YOUR VACUUM TUBES AND PROVIDE FOR STORAGE AND EASY IDENTIFICATION. TUBES IN THESE BOXES SHOULD BE ASSUMED TO BE USED UNLESS OTHERWISE STATED. 5. WHITE BOXES. SHOULD BE SELF EXPLANATORY. NOTES ON TESTING OF TUBES: THIS IS DONE ON A NUMBER OF TESTING DEVICES 1. TEKTRONIX CURVE TRACER 2. B&K 747 TUBE TESTER 3. MERCURY 1000 DYNAMIC MUTUAL CONDUCTANCE TESTER 4. HICKOK 600A DYNAMIC MUTUAL CONDUCTANCE TUBE TESTER  I test all tubes that I sell in one way or another, or I will state untested. I have a B&K 747 tube tester. This is a mutual conductance tester. It give a percentage value of gm for the tube under test and checks for shorts and grid emissions. I also use a Tektronix curve tracer for testing triodes. I give a number of evaluations for tubes. One evaluation is a screen shot of the tube with a high voltage applied to the plate. This helps the buyer see the linearity of the tube in question at the highest voltage the tube will see in a real circuit. The Curve tracer steps the triode through 10 gate/grid voltages starting with -10 volts and going to 0 volts. The lines show how the tube conducts throughout that range. At 0 volt the tube is at max conduction and is the top line on the display. It is easy at that point to take where that top line intersects the plate voltage, find the milliamp level and compare it to the datasheet. I give those numbers for you in the Item condition box. To further help the buyer I also include the Design values, for gm and ma readings in the table. This can then be compared to other tube sellers using inferior test methods such as Hickok,  Amplitrex, and other testers. The Tektronix curve tracer gives values within 3% of the actual value. The very best portable testers only can approach 10% accuracy. 5.    Please NOTE: The numbers given for gm are what I see on my tester. I DO NOT guarantee that you will see those numbers on your tester. I only guarantee that these tubes will test good, with no shorts, or gas, on a decent calibrated tester. I dont guarantee or imply anything else. 6. VERY IMPORTANT NOTE!!! Vintage tube testers almost always, due to age, have VERY LOW HEATER VOLTAGES!!!  Every tester I have ever bought is below 6 volts when selecting 6.3 volts. They average 5.8 volts. The voltage NEEDS to be 6.3 and 12.6. You can calibrate a vintage tube tester all you want. If the heater voltage is not right, you will NEVER get the right gm value. I have customers complain that their tubes are not the same as what I see on my tester. They say they have a calibrated tube tester. I have 40 tube testers. On all of them I have an outside regulated DC power supply that feeds the tube tester the correct heater voltage. 7. NOTE I dont check each and every tube for noise or tone. This is SUBJECTIVE and it is too time consuming. If you dont like the noise level or the tone we offer a hassle free refund policy.  8. NOTE. TESTING RESULTS SHOW HOW THE TUBE IS PERFORMING  NOW.  TESTING RESULTS DO NOT SHOW HOW OLD A TUBE IS OR HOW MANY HOURS IT HAS BEEN USED. HOWEVER IF A TUBE TEST NOS YOU CAN BE ASSURED IT WILL LAST A LONG TIME AND IS WORKING VERY WELL. NOTES ON CUSTOMER RELATIONS: I want to see you happy with your purchase. I will never sell a tube that is below standard…… I have sold many tubes here on Ebay, and all my customers have been completely satisfied. I will work with you in good faith if there are any problems, or if you are unsatisfied in any way. I want your business now and in the future, so I assume you are the boss, and I am the employee. All tubes are tested for shorts, continuity, and emissions. I prefer PayPal. NOTES ON RETURNS: 1.  NOTE: RETURNS: It is my highest desire that you are completely satisfied with your purchase from me. I will bend over backwards to make sure that you are a happy customer.2. NOTE: We almost always have a replacement available of the same or sometimes even higher quality. Please note that it is our desire TO DO BUSINESS! We never rip anyone off.......EVER. 3. NOTE: If anything you buy from me is less than satisfactory, message me BEFORE you either open a case or hit the “item not as described” button.4. NOTE: Sound quality is tremendously SUBJECTIVE. For tubes returned for noise or sound quality of any kind you pay for the shipping we refund the purchase. We refund the price of the item NOT THE SHIPPING COST. If we sent the wrong tube we will of course pay for return shipping. For any tubes that are DOA we require that you send a us a picture of the shipping box to show us the damage. We test EVERY tube sent out and none should be DOA unless broken in shipping.5.    PLEASE NOTE:  Tube silkscreen (lettering on the tubes) is VERY fragile. It can be wiped off and destroyed VERY easily. If you wipe off the silkscreen while handling the tube you diminish their value by up to 70%. DO NOT handle the tubes or hold them from the cylinder. ALWAYS hold them from the ENDS. If you are returning tubes and they are not in the same condition cosmetically I cannot give you a full refund. THIS IS VERY IMPORTANT. 6. NOTE: UNLESS YOU MAKE ARRANGEMENTS WITH US BEFORE YOU PURCHASE, YOU MUST PAY FOR ITEMS PURCHASED WITHIN 2 DAYS OR A CASE WILL BE OPENED FOR AN UNPAID ITEM!!! International customers  NOTE:1. Please wait for us to invoice you for the correct amount. If you have purchased more than one item, we must calculate how much the shipping will be. Shipping will be HIGHER due to insurance and shipping methods needed for expensive item totals. If you are buying only one item this will not be an issue. 2. NOTE: Under no circumstances will we state on a US customs a declared value of less than the sale price. This is an honesty issue. We are honest with everyone to the best of our ability to do so. We want you to trust that what we say is true. There cannot be that trust, if we make false statements knowingly to anyone. If your country has tariffs/taxes so high that they cause large numbers of normally honest folks to make false statements, we urge you to work for change of those laws. 3 NOTE: International buyers if you bought more than one item and want combined shipping it will ship in 2 days.4. NOTE: And all the Angels sang because the heavenly music was playing and it was turned all the way up.     Listing and template services provided by inkFrog

Mullard DY802. EHT Rectifier. Will be carefully packed for delivery.

  TUBE HUNTER VACUUM TUBE GEMS THESE ARE THE SPECIFICS OF THE TUBE/TUBES/PARTS FOR SALE THESE ARE THE TUBE/TUBES/PARTS FOR SALE:  MANUFACTURER:     MULLARD PRODUCTION CITY:                                     USA TUBE TYPE:   6LX8 LCF80 DESIGNATION:                                             PREAMP TUBE YEAR:     VARIES MONTH:     VARIES Date code match    SINGLE SILK SCREEN CONDITION %:                    100% MICA:    2 PLATES:    GREY GM %:     120% SINGLE/PAIR/QUAD/MULTI:     SINGLE GETTER:                                                          0  GETTER                                      DATE:      VARIES NOS NIB. This auction is for ONE TUBE. You will receive one of these tubes. All are NOS NIB and tested by by me.   THESE TUBES ARE NOS NIB. Normal 0 false false false EN-US X-NONE X-NONE On my tester a B&K 747 tester:    Below 55 = BAD      55-65 = ?     65 -100 = Good     100-120+ = NOS   *********************************************************************************** IMPORTANT NOTE ON FILLING ORDERS With NOS tubes we will substitute NOS American tubes with NOS American of a different brand to fill an order if we are short the brand listed. If you are brand sensitive let me know BEFORE you order.  NOTES ON PHOTO PROPS:  THE RCA DOG, PHONOGRAPH, REDDY KILLOWATT, AND OTHER STATUETTES, INCLUDING DEVICES TO MAKE TUBES OR OTHER PARTS STAND UP STRAIGHT, ARE NOT PART OF THE SALE. THIS IS TRUE OF ANY PROPS USED IN PHOTOGRAPHY IN THE LISTING THAT ARE NOT SPECIFICALLY CALLED OUT IN THE LISTING AS ITEMS FOR SALE. NOTES ON PHOTOS FOR SINGLE TUBES: IF YOU ARE BUYING A SINGLE TUBE: FOR THE MOST PART WITH TUBES UNDER 15 DOLLARS WE ARE USING STOCK PHOTOS FOR SINGLES. YOUR MILEAGE MAY VARY. YOU WILL RECEIVE A NEW TUBE. IT WILL TEST NOS. IT MAY OR MAY NOT BE ONE OF THE ONES IN THE PICTURE. WE GET TUBES IN ALL THE TIME. WITH SINGLES OF A LOW VALUE WE ARE NOT PICKY ABOUT DATES AND CONSTRUCTION AND THINGS LIKE THAT. WE ALSO MAY SUBSTITUE A TUBE BY A DIFFERENT MANUFACTOR IF WE ARE LOW ON STOCK OF THAT BRAND SUCH AS AN RCA FOR A GE FOR EXAMPLE, BUT WE WILL NOT SEND A JAPANESE BRAND FOR A USA MADE TUBE, OR A LOWER QUALITY TUBE IN ANY WAY. IF WE ARE SELLING A PAIR, OR A HIGH VALUE SINGLE THEN WE GET SERIOUS ABOUT SUCH THINGS.  NOTES ON MATCHING: 1. TRIODES SIMILAR TO 12AX7 ARE DONE ON A TEKTRONIX 576 CURVE TRACER IF I HAVE MATCHED THEM WITH THIS MACHINE I GUARANTEE THAT THESE MATCHED PAIRS WILL BE NOT BE ABLE TO DIFFERENTIATED WITH THE HUMAN EAR IN A PREAMP CIRCUIT.  2. ON OTHER TUBE I USE A CALIBRATED HICKOK 600A TO MATCH TUBES. 3. ON MODERN TUBES, FOR WHICH THE 600A CANNOT PERFORM TESTS, I USE THE CALIBRATED B&K 747B TUBE TESTER. NOTES ON THE BOXES. LISTING WILL GENERALLY HAVE INFORMATION ABOUT ANY BOXES ASSOCIATED WITH THE TUBES FOR SALE. THESE ARE THE OPTIONS: 1. ORIGINAL BOXES IN VARYING CONDITION. THESE BOXES WILL BE THE ORIGINAL BOXES THE TUBES CAME IN AND WILL SHOW AGING IN VARYING DEGREES. THESE TUBES ARE ASSUMED TO BE NEW AND WILL TEST AS NOS. 2. NO BOXES PROVIDED (NONE AVAILABLE USUALLY USED AND SHOULD BE ASSUMED TO BE USED UNLESS OTHERWISE STATED. 3. REPURPOSED BOXES. THESE ARE BOXES OF THE SAME MANUFACTURER. THESE WILL HAVE A LABEL OVER THE TUBE NUMBER THAT REFLECTS THE TUBE BEING SOLD. THESE TUBES SHOULD BE ASSUMED TO BE USED UNLESS OTHERWISE STATED. 4. TUBEHUNTER BOXES. THESE ARE BOXES I HAVE MADE WITH GREAT TIME AND EXPENSE TO PROTECT YOUR VACUUM TUBES AND PROVIDE FOR STORAGE AND EASY IDENTIFICATION. TUBES IN THESE BOXES SHOULD BE ASSUMED TO BE USED UNLESS OTHERWISE STATED. 5. WHITE BOXES. SHOULD BE SELF EXPLANATORY. NOTES ON TESTING OF TUBES: THIS IS DONE ON A NUMBER OF TESTING DEVICES 1. TEKTRONIX CURVE TRACER 2. B&K 747 TUBE TESTER 3. MERCURY 1000 DYNAMIC MUTUAL CONDUCTANCE TESTER 4. HICKOK 600A DYNAMIC MUTUAL CONDUCTANCE TUBE TESTER  I test all tubes that I sell in one way or another, or I will state untested. I have a B&K 747 tube tester. This is a mutual conductance tester. It give a percentage value of gm for the tube under test and checks for shorts and grid emissions. I also use a Tektronix curve tracer for testing triodes. I give a number of evaluations for tubes. One evaluation is a screen shot of the tube with a high voltage applied to the plate. This helps the buyer see the linearity of the tube in question at the highest voltage the tube will see in a real circuit. The Curve tracer steps the triode through 10 gate/grid voltages starting with -10 volts and going to 0 volts. The lines show how the tube conducts throughout that range. At 0 volt the tube is at max conduction and is the top line on the display. It is easy at that point to take where that top line intersects the plate voltage, find the milliamp level and compare it to the datasheet. I give those numbers for you in the Item condition box. To further help the buyer I also include the Design values, for gm and ma readings in the table. This can then be compared to other tube sellers using inferior test methods such as Hickok,  Amplitrex, and other testers. The Tektronix curve tracer gives values within 3% of the actual value. The very best portable testers only can approach 10% accuracy. 5.    Please NOTE: The numbers given for gm are what I see on my tester. I DO NOT guarantee that you will see those numbers on your tester. I only guarantee that these tubes will test good, with no shorts, or gas, on a decent calibrated tester. I dont guarantee or imply anything else. 6. VERY IMPORTANT NOTE!!! Vintage tube testers almost always, due to age, have VERY LOW HEATER VOLTAGES!!!  Every tester I have ever bought is below 6 volts when selecting 6.3 volts. They average 5.8 volts. The voltage NEEDS to be 6.3 and 12.6. You can calibrate a vintage tube tester all you want. If the heater voltage is not right, you will NEVER get the right gm value. I have customers complain that their tubes are not the same as what I see on my tester. They say they have a calibrated tube tester. I have 40 tube testers. On all of them I have an outside regulated DC power supply that feeds the tube tester the correct heater voltage. 7. NOTE I dont check each and every tube for noise or tone. This is SUBJECTIVE and it is too time consuming. If you dont like the noise level or the tone we offer a hassle free refund policy.  8. NOTE. TESTING RESULTS SHOW HOW THE TUBE IS PERFORMING  NOW.  TESTING RESULTS DO NOT SHOW HOW OLD A TUBE IS OR HOW MANY HOURS IT HAS BEEN USED. HOWEVER IF A TUBE TEST NOS YOU CAN BE ASSURED IT WILL LAST A LONG TIME AND IS WORKING VERY WELL. NOTES ON CUSTOMER RELATIONS: I want to see you happy with your purchase. I will never sell a tube that is below standard…… I have sold many tubes here on Ebay, and all my customers have been completely satisfied. I will work with you in good faith if there are any problems, or if you are unsatisfied in any way. I want your business now and in the future, so I assume you are the boss, and I am the employee. All tubes are tested for shorts, continuity, and emissions. I prefer PayPal. NOTES ON RETURNS: 1.  NOTE: RETURNS: It is my highest desire that you are completely satisfied with your purchase from me. I will bend over backwards to make sure that you are a happy customer.2. NOTE: We almost always have a replacement available of the same or sometimes even higher quality. Please note that it is our desire TO DO BUSINESS! We never rip anyone off.......EVER. 3. NOTE: If anything you buy from me is less than satisfactory, message me BEFORE you either open a case or hit the “item not as described” button.4. NOTE: Sound quality is tremendously SUBJECTIVE. For tubes returned for noise or sound quality of any kind you pay for the shipping we refund the purchase. We refund the price of the item NOT THE SHIPPING COST. If we sent the wrong tube we will of course pay for return shipping. For any tubes that are DOA we require that you send a us a picture of the shipping box to show us the damage. We test EVERY tube sent out and none should be DOA unless broken in shipping.5.    PLEASE NOTE:  Tube silkscreen (lettering on the tubes) is VERY fragile. It can be wiped off and destroyed VERY easily. If you wipe off the silkscreen while handling the tube you diminish their value by up to 70%. DO NOT handle the tubes or hold them from the cylinder. ALWAYS hold them from the ENDS. If you are returning tubes and they are not in the same condition cosmetically I cannot give you a full refund. THIS IS VERY IMPORTANT. 6. NOTE: UNLESS YOU MAKE ARRANGEMENTS WITH US BEFORE YOU PURCHASE, YOU MUST PAY FOR ITEMS PURCHASED WITHIN 2 DAYS OR A CASE WILL BE OPENED FOR AN UNPAID ITEM!!! International customers  NOTE:1. Please wait for us to invoice you for the correct amount. If you have purchased more than one item, we must calculate how much the shipping will be. Shipping will be HIGHER due to insurance and shipping methods needed for expensive item totals. If you are buying only one item this will not be an issue. 2. NOTE: Under no circumstances will we state on a US customs a declared value of less than the sale price. This is an honesty issue. We are honest with everyone to the best of our ability to do so. We want you to trust that what we say is true. There cannot be that trust, if we make false statements knowingly to anyone. If your country has tariffs/taxes so high that they cause large numbers of normally honest folks to make false statements, we urge you to work for change of those laws. 3 NOTE: International buyers if you bought more than one item and want combined shipping it will ship in 2 days.4. NOTE: And all the Angels sang because the heavenly music was playing and it was turned all the way up.     Listing and template services provided by inkFrog

Mullard DY802. EHT Rectifier. Will be carefully packed for delivery.

Mullard DY802. EHT Rectifier. Will be carefully packed for delivery.

  TUBE HUNTER VACUUM TUBE GEMS THESE ARE THE SPECIFICS OF THE TUBE/TUBES/PARTS FOR SALE THESE ARE THE TUBE/TUBES/PARTS FOR SALE:  MANUFACTURER:     MULLARD PRODUCTION CITY:                                     USA TUBE TYPE:   6LX8 LCF80 DESIGNATION:                                             PREAMP TUBE YEAR:     VARIES MONTH:     VARIES Date code match    SINGLE SILK SCREEN CONDITION %:                    100% MICA:    2 PLATES:    GREY GM %:     120% SINGLE/PAIR/QUAD/MULTI:     SINGLE GETTER:                                                          0  GETTER                                      DATE:      VARIES NOS NIB. This auction is for ONE TUBE. You will receive one of these tubes. All are NOS NIB and tested by by me.   THESE TUBES ARE NOS NIB. Normal 0 false false false EN-US X-NONE X-NONE On my tester a B&K 747 tester:    Below 55 = BAD      55-65 = ?     65 -100 = Good     100-120+ = NOS   *********************************************************************************** IMPORTANT NOTE ON FILLING ORDERS With NOS tubes we will substitute NOS American tubes with NOS American of a different brand to fill an order if we are short the brand listed. If you are brand sensitive let me know BEFORE you order.  NOTES ON PHOTO PROPS:  THE RCA DOG, PHONOGRAPH, REDDY KILLOWATT, AND OTHER STATUETTES, INCLUDING DEVICES TO MAKE TUBES OR OTHER PARTS STAND UP STRAIGHT, ARE NOT PART OF THE SALE. THIS IS TRUE OF ANY PROPS USED IN PHOTOGRAPHY IN THE LISTING THAT ARE NOT SPECIFICALLY CALLED OUT IN THE LISTING AS ITEMS FOR SALE. NOTES ON PHOTOS FOR SINGLE TUBES: IF YOU ARE BUYING A SINGLE TUBE: FOR THE MOST PART WITH TUBES UNDER 15 DOLLARS WE ARE USING STOCK PHOTOS FOR SINGLES. YOUR MILEAGE MAY VARY. YOU WILL RECEIVE A NEW TUBE. IT WILL TEST NOS. IT MAY OR MAY NOT BE ONE OF THE ONES IN THE PICTURE. WE GET TUBES IN ALL THE TIME. WITH SINGLES OF A LOW VALUE WE ARE NOT PICKY ABOUT DATES AND CONSTRUCTION AND THINGS LIKE THAT. WE ALSO MAY SUBSTITUE A TUBE BY A DIFFERENT MANUFACTOR IF WE ARE LOW ON STOCK OF THAT BRAND SUCH AS AN RCA FOR A GE FOR EXAMPLE, BUT WE WILL NOT SEND A JAPANESE BRAND FOR A USA MADE TUBE, OR A LOWER QUALITY TUBE IN ANY WAY. IF WE ARE SELLING A PAIR, OR A HIGH VALUE SINGLE THEN WE GET SERIOUS ABOUT SUCH THINGS.  NOTES ON MATCHING: 1. TRIODES SIMILAR TO 12AX7 ARE DONE ON A TEKTRONIX 576 CURVE TRACER IF I HAVE MATCHED THEM WITH THIS MACHINE I GUARANTEE THAT THESE MATCHED PAIRS WILL BE NOT BE ABLE TO DIFFERENTIATED WITH THE HUMAN EAR IN A PREAMP CIRCUIT.  2. ON OTHER TUBE I USE A CALIBRATED HICKOK 600A TO MATCH TUBES. 3. ON MODERN TUBES, FOR WHICH THE 600A CANNOT PERFORM TESTS, I USE THE CALIBRATED B&K 747B TUBE TESTER. NOTES ON THE BOXES. LISTING WILL GENERALLY HAVE INFORMATION ABOUT ANY BOXES ASSOCIATED WITH THE TUBES FOR SALE. THESE ARE THE OPTIONS: 1. ORIGINAL BOXES IN VARYING CONDITION. THESE BOXES WILL BE THE ORIGINAL BOXES THE TUBES CAME IN AND WILL SHOW AGING IN VARYING DEGREES. THESE TUBES ARE ASSUMED TO BE NEW AND WILL TEST AS NOS. 2. NO BOXES PROVIDED (NONE AVAILABLE USUALLY USED AND SHOULD BE ASSUMED TO BE USED UNLESS OTHERWISE STATED. 3. REPURPOSED BOXES. THESE ARE BOXES OF THE SAME MANUFACTURER. THESE WILL HAVE A LABEL OVER THE TUBE NUMBER THAT REFLECTS THE TUBE BEING SOLD. THESE TUBES SHOULD BE ASSUMED TO BE USED UNLESS OTHERWISE STATED. 4. TUBEHUNTER BOXES. THESE ARE BOXES I HAVE MADE WITH GREAT TIME AND EXPENSE TO PROTECT YOUR VACUUM TUBES AND PROVIDE FOR STORAGE AND EASY IDENTIFICATION. TUBES IN THESE BOXES SHOULD BE ASSUMED TO BE USED UNLESS OTHERWISE STATED. 5. WHITE BOXES. SHOULD BE SELF EXPLANATORY. NOTES ON TESTING OF TUBES: THIS IS DONE ON A NUMBER OF TESTING DEVICES 1. TEKTRONIX CURVE TRACER 2. B&K 747 TUBE TESTER 3. MERCURY 1000 DYNAMIC MUTUAL CONDUCTANCE TESTER 4. HICKOK 600A DYNAMIC MUTUAL CONDUCTANCE TUBE TESTER  I test all tubes that I sell in one way or another, or I will state untested. I have a B&K 747 tube tester. This is a mutual conductance tester. It give a percentage value of gm for the tube under test and checks for shorts and grid emissions. I also use a Tektronix curve tracer for testing triodes. I give a number of evaluations for tubes. One evaluation is a screen shot of the tube with a high voltage applied to the plate. This helps the buyer see the linearity of the tube in question at the highest voltage the tube will see in a real circuit. The Curve tracer steps the triode through 10 gate/grid voltages starting with -10 volts and going to 0 volts. The lines show how the tube conducts throughout that range. At 0 volt the tube is at max conduction and is the top line on the display. It is easy at that point to take where that top line intersects the plate voltage, find the milliamp level and compare it to the datasheet. I give those numbers for you in the Item condition box. To further help the buyer I also include the Design values, for gm and ma readings in the table. This can then be compared to other tube sellers using inferior test methods such as Hickok,  Amplitrex, and other testers. The Tektronix curve tracer gives values within 3% of the actual value. The very best portable testers only can approach 10% accuracy. 5.    Please NOTE: The numbers given for gm are what I see on my tester. I DO NOT guarantee that you will see those numbers on your tester. I only guarantee that these tubes will test good, with no shorts, or gas, on a decent calibrated tester. I dont guarantee or imply anything else. 6. VERY IMPORTANT NOTE!!! Vintage tube testers almost always, due to age, have VERY LOW HEATER VOLTAGES!!!  Every tester I have ever bought is below 6 volts when selecting 6.3 volts. They average 5.8 volts. The voltage NEEDS to be 6.3 and 12.6. You can calibrate a vintage tube tester all you want. If the heater voltage is not right, you will NEVER get the right gm value. I have customers complain that their tubes are not the same as what I see on my tester. They say they have a calibrated tube tester. I have 40 tube testers. On all of them I have an outside regulated DC power supply that feeds the tube tester the correct heater voltage. 7. NOTE I dont check each and every tube for noise or tone. This is SUBJECTIVE and it is too time consuming. If you dont like the noise level or the tone we offer a hassle free refund policy.  8. NOTE. TESTING RESULTS SHOW HOW THE TUBE IS PERFORMING  NOW.  TESTING RESULTS DO NOT SHOW HOW OLD A TUBE IS OR HOW MANY HOURS IT HAS BEEN USED. HOWEVER IF A TUBE TEST NOS YOU CAN BE ASSURED IT WILL LAST A LONG TIME AND IS WORKING VERY WELL. NOTES ON CUSTOMER RELATIONS: I want to see you happy with your purchase. I will never sell a tube that is below standard…… I have sold many tubes here on Ebay, and all my customers have been completely satisfied. I will work with you in good faith if there are any problems, or if you are unsatisfied in any way. I want your business now and in the future, so I assume you are the boss, and I am the employee. All tubes are tested for shorts, continuity, and emissions. I prefer PayPal. NOTES ON RETURNS: 1.  NOTE: RETURNS: It is my highest desire that you are completely satisfied with your purchase from me. I will bend over backwards to make sure that you are a happy customer.2. NOTE: We almost always have a replacement available of the same or sometimes even higher quality. Please note that it is our desire TO DO BUSINESS! We never rip anyone off.......EVER. 3. NOTE: If anything you buy from me is less than satisfactory, message me BEFORE you either open a case or hit the “item not as described” button.4. NOTE: Sound quality is tremendously SUBJECTIVE. For tubes returned for noise or sound quality of any kind you pay for the shipping we refund the purchase. We refund the price of the item NOT THE SHIPPING COST. If we sent the wrong tube we will of course pay for return shipping. For any tubes that are DOA we require that you send a us a picture of the shipping box to show us the damage. We test EVERY tube sent out and none should be DOA unless broken in shipping.5.    PLEASE NOTE:  Tube silkscreen (lettering on the tubes) is VERY fragile. It can be wiped off and destroyed VERY easily. If you wipe off the silkscreen while handling the tube you diminish their value by up to 70%. DO NOT handle the tubes or hold them from the cylinder. ALWAYS hold them from the ENDS. If you are returning tubes and they are not in the same condition cosmetically I cannot give you a full refund. THIS IS VERY IMPORTANT. 6. NOTE: UNLESS YOU MAKE ARRANGEMENTS WITH US BEFORE YOU PURCHASE, YOU MUST PAY FOR ITEMS PURCHASED WITHIN 2 DAYS OR A CASE WILL BE OPENED FOR AN UNPAID ITEM!!! International customers  NOTE:1. Please wait for us to invoice you for the correct amount. If you have purchased more than one item, we must calculate how much the shipping will be. Shipping will be HIGHER due to insurance and shipping methods needed for expensive item totals. If you are buying only one item this will not be an issue. 2. NOTE: Under no circumstances will we state on a US customs a declared value of less than the sale price. This is an honesty issue. We are honest with everyone to the best of our ability to do so. We want you to trust that what we say is true. There cannot be that trust, if we make false statements knowingly to anyone. If your country has tariffs/taxes so high that they cause large numbers of normally honest folks to make false statements, we urge you to work for change of those laws. 3 NOTE: International buyers if you bought more than one item and want combined shipping it will ship in 2 days.4. NOTE: And all the Angels sang because the heavenly music was playing and it was turned all the way up.     Listing and template services provided by inkFrog

Vintage Tungsram Mullard radio valve DY802. The box has been opened but it appears to be unused. Please see photos.

Mullard DY802. EHT Rectifier. Will be carefully packed for delivery.

Here are 6 old valves that were found in a shed. I believe they were originally from an old TV. I was curious as to what they were so put them to one side. The set of 6 valves are untested and therefore, sold as seen as historic electrical items. They are many decades old and will have age-wear so cannot guarantee any functionality. Some appear discoloured at the top. The writing has faded/disappeared on some of the tubes, however, I did manage to read some text on 4 of them: Mullard EF184 BVA MADE IN GREAT BRITAIN Pinnacle FOREIGN JAN 83 DY802 PCL86 PY 88 foreign Please study the photos for further details. I hope it helps someone. Thanks for looking.

Please DO NOT pay until an eBay invoice is sent to you - thank you. Please DO NOT bid if you have less then 15 feedback ! Please DO NOT ask me to falsify shipping declaration .... Buy from a seller with 23 years on eBay with 100% feedback :-) For your consideration I have 2 highly prized Mullard 12AU7 valves made circa 1957 at the Blackburn factory in England with matched 17mm long plates that test high - also note matching date codes my Audiophile friends love these 8H production goal post getter valves - superb for your vintage mono blocks or stereo amplifier - if you want your amp to sing then these are must :-) my photos show good detail - good luck. Tube 1 = 11.0/12.0ma & 2.5/2.5gm both platesTube 2 = 11.5/12.0ma & 2.5/2.5gm both plates AVO MK4 new average = 10.5ma & 2.2gm on each plate Please read my recent 100% feedback and consider my photos as a reasonable and good representation of the item being auctioned - I pride myself with good packing ( no charge ) and with some goods I double box for safe arrival, pick up is always welcomed - if you have ANY questions please ask before bidding. Yes we combine shipping/postage on all our listings and ALL goods will be sent REGISTERED/TRACKED by Australia Post ( $3/registered/signature cost for Aussie customers ) in Australia. Shipping Internationally by Australia Post, this gives Tracking and or Signature on arrival and is a very good safe and reliable service I have used for 40 years :-) ** Please note : All electrical goods must be inspected/checked by a licenced electrical technician before any voltage is applied.

Here are 6 old valves that were found in a shed. I believe they were originally from an old TV. I was curious as to what they were so put them to one side. The set of 6 valves are untested and therefore, sold as seen as historic electrical items. They are many decades old and will have age-wear so cannot guarantee any functionality. Some appear discoloured at the top. The writing has faded/disappeared on some of the tubes, however, I did manage to read some text on 4 of them: Mullard EF184 BVA MADE IN GREAT BRITAIN Pinnacle FOREIGN JAN 83 DY802 PCL86 PY 88 foreign Please study the photos for further details. I hope it helps someone. Thanks for looking.

  TUBE HUNTER VACUUM TUBE GEMS THESE ARE THE SPECIFICS OF THE TUBE/TUBES/PARTS FOR SALE THESE ARE THE TUBE/TUBES/PARTS FOR SALE:  MANUFACTURER:     MULLARD PRODUCTION CITY:                                     USA TUBE TYPE:   6LX8 LCF80 DESIGNATION:                                             PREAMP TUBE YEAR:     VARIES MONTH:     VARIES Date code match    SINGLE SILK SCREEN CONDITION %:                    100% MICA:    2 PLATES:    GREY GM %:     120% SINGLE/PAIR/QUAD/MULTI:     SINGLE GETTER:                                                          0  GETTER                                      DATE:      VARIES NOS NIB. This auction is for ONE TUBE. You will receive one of these tubes. All are NOS NIB and tested by by me.   THESE TUBES ARE NOS NIB. Normal 0 false false false EN-US X-NONE X-NONE On my tester a B&K 747 tester:    Below 55 = BAD      55-65 = ?     65 -100 = Good     100-120+ = NOS   *********************************************************************************** IMPORTANT NOTE ON FILLING ORDERS With NOS tubes we will substitute NOS American tubes with NOS American of a different brand to fill an order if we are short the brand listed. If you are brand sensitive let me know BEFORE you order.  NOTES ON PHOTO PROPS:  THE RCA DOG, PHONOGRAPH, REDDY KILLOWATT, AND OTHER STATUETTES, INCLUDING DEVICES TO MAKE TUBES OR OTHER PARTS STAND UP STRAIGHT, ARE NOT PART OF THE SALE. THIS IS TRUE OF ANY PROPS USED IN PHOTOGRAPHY IN THE LISTING THAT ARE NOT SPECIFICALLY CALLED OUT IN THE LISTING AS ITEMS FOR SALE. NOTES ON PHOTOS FOR SINGLE TUBES: IF YOU ARE BUYING A SINGLE TUBE: FOR THE MOST PART WITH TUBES UNDER 15 DOLLARS WE ARE USING STOCK PHOTOS FOR SINGLES. YOUR MILEAGE MAY VARY. YOU WILL RECEIVE A NEW TUBE. IT WILL TEST NOS. IT MAY OR MAY NOT BE ONE OF THE ONES IN THE PICTURE. WE GET TUBES IN ALL THE TIME. WITH SINGLES OF A LOW VALUE WE ARE NOT PICKY ABOUT DATES AND CONSTRUCTION AND THINGS LIKE THAT. WE ALSO MAY SUBSTITUE A TUBE BY A DIFFERENT MANUFACTOR IF WE ARE LOW ON STOCK OF THAT BRAND SUCH AS AN RCA FOR A GE FOR EXAMPLE, BUT WE WILL NOT SEND A JAPANESE BRAND FOR A USA MADE TUBE, OR A LOWER QUALITY TUBE IN ANY WAY. IF WE ARE SELLING A PAIR, OR A HIGH VALUE SINGLE THEN WE GET SERIOUS ABOUT SUCH THINGS.  NOTES ON MATCHING: 1. TRIODES SIMILAR TO 12AX7 ARE DONE ON A TEKTRONIX 576 CURVE TRACER IF I HAVE MATCHED THEM WITH THIS MACHINE I GUARANTEE THAT THESE MATCHED PAIRS WILL BE NOT BE ABLE TO DIFFERENTIATED WITH THE HUMAN EAR IN A PREAMP CIRCUIT.  2. ON OTHER TUBE I USE A CALIBRATED HICKOK 600A TO MATCH TUBES. 3. ON MODERN TUBES, FOR WHICH THE 600A CANNOT PERFORM TESTS, I USE THE CALIBRATED B&K 747B TUBE TESTER. NOTES ON THE BOXES. LISTING WILL GENERALLY HAVE INFORMATION ABOUT ANY BOXES ASSOCIATED WITH THE TUBES FOR SALE. THESE ARE THE OPTIONS: 1. ORIGINAL BOXES IN VARYING CONDITION. THESE BOXES WILL BE THE ORIGINAL BOXES THE TUBES CAME IN AND WILL SHOW AGING IN VARYING DEGREES. THESE TUBES ARE ASSUMED TO BE NEW AND WILL TEST AS NOS. 2. NO BOXES PROVIDED (NONE AVAILABLE USUALLY USED AND SHOULD BE ASSUMED TO BE USED UNLESS OTHERWISE STATED. 3. REPURPOSED BOXES. THESE ARE BOXES OF THE SAME MANUFACTURER. THESE WILL HAVE A LABEL OVER THE TUBE NUMBER THAT REFLECTS THE TUBE BEING SOLD. THESE TUBES SHOULD BE ASSUMED TO BE USED UNLESS OTHERWISE STATED. 4. TUBEHUNTER BOXES. THESE ARE BOXES I HAVE MADE WITH GREAT TIME AND EXPENSE TO PROTECT YOUR VACUUM TUBES AND PROVIDE FOR STORAGE AND EASY IDENTIFICATION. TUBES IN THESE BOXES SHOULD BE ASSUMED TO BE USED UNLESS OTHERWISE STATED. 5. WHITE BOXES. SHOULD BE SELF EXPLANATORY. NOTES ON TESTING OF TUBES: THIS IS DONE ON A NUMBER OF TESTING DEVICES 1. TEKTRONIX CURVE TRACER 2. B&K 747 TUBE TESTER 3. MERCURY 1000 DYNAMIC MUTUAL CONDUCTANCE TESTER 4. HICKOK 600A DYNAMIC MUTUAL CONDUCTANCE TUBE TESTER  I test all tubes that I sell in one way or another, or I will state untested. I have a B&K 747 tube tester. This is a mutual conductance tester. It give a percentage value of gm for the tube under test and checks for shorts and grid emissions. I also use a Tektronix curve tracer for testing triodes. I give a number of evaluations for tubes. One evaluation is a screen shot of the tube with a high voltage applied to the plate. This helps the buyer see the linearity of the tube in question at the highest voltage the tube will see in a real circuit. The Curve tracer steps the triode through 10 gate/grid voltages starting with -10 volts and going to 0 volts. The lines show how the tube conducts throughout that range. At 0 volt the tube is at max conduction and is the top line on the display. It is easy at that point to take where that top line intersects the plate voltage, find the milliamp level and compare it to the datasheet. I give those numbers for you in the Item condition box. To further help the buyer I also include the Design values, for gm and ma readings in the table. This can then be compared to other tube sellers using inferior test methods such as Hickok,  Amplitrex, and other testers. The Tektronix curve tracer gives values within 3% of the actual value. The very best portable testers only can approach 10% accuracy. 5.    Please NOTE: The numbers given for gm are what I see on my tester. I DO NOT guarantee that you will see those numbers on your tester. I only guarantee that these tubes will test good, with no shorts, or gas, on a decent calibrated tester. I dont guarantee or imply anything else. 6. VERY IMPORTANT NOTE!!! Vintage tube testers almost always, due to age, have VERY LOW HEATER VOLTAGES!!!  Every tester I have ever bought is below 6 volts when selecting 6.3 volts. They average 5.8 volts. The voltage NEEDS to be 6.3 and 12.6. You can calibrate a vintage tube tester all you want. If the heater voltage is not right, you will NEVER get the right gm value. I have customers complain that their tubes are not the same as what I see on my tester. They say they have a calibrated tube tester. I have 40 tube testers. On all of them I have an outside regulated DC power supply that feeds the tube tester the correct heater voltage. 7. NOTE I dont check each and every tube for noise or tone. This is SUBJECTIVE and it is too time consuming. If you dont like the noise level or the tone we offer a hassle free refund policy.  8. NOTE. TESTING RESULTS SHOW HOW THE TUBE IS PERFORMING  NOW.  TESTING RESULTS DO NOT SHOW HOW OLD A TUBE IS OR HOW MANY HOURS IT HAS BEEN USED. HOWEVER IF A TUBE TEST NOS YOU CAN BE ASSURED IT WILL LAST A LONG TIME AND IS WORKING VERY WELL. NOTES ON CUSTOMER RELATIONS: I want to see you happy with your purchase. I will never sell a tube that is below standard…… I have sold many tubes here on Ebay, and all my customers have been completely satisfied. I will work with you in good faith if there are any problems, or if you are unsatisfied in any way. I want your business now and in the future, so I assume you are the boss, and I am the employee. All tubes are tested for shorts, continuity, and emissions. I prefer PayPal. NOTES ON RETURNS: 1.  NOTE: RETURNS: It is my highest desire that you are completely satisfied with your purchase from me. I will bend over backwards to make sure that you are a happy customer.2. NOTE: We almost always have a replacement available of the same or sometimes even higher quality. Please note that it is our desire TO DO BUSINESS! We never rip anyone off.......EVER. 3. NOTE: If anything you buy from me is less than satisfactory, message me BEFORE you either open a case or hit the “item not as described” button.4. NOTE: Sound quality is tremendously SUBJECTIVE. For tubes returned for noise or sound quality of any kind you pay for the shipping we refund the purchase. We refund the price of the item NOT THE SHIPPING COST. If we sent the wrong tube we will of course pay for return shipping. For any tubes that are DOA we require that you send a us a picture of the shipping box to show us the damage. We test EVERY tube sent out and none should be DOA unless broken in shipping.5.    PLEASE NOTE:  Tube silkscreen (lettering on the tubes) is VERY fragile. It can be wiped off and destroyed VERY easily. If you wipe off the silkscreen while handling the tube you diminish their value by up to 70%. DO NOT handle the tubes or hold them from the cylinder. ALWAYS hold them from the ENDS. If you are returning tubes and they are not in the same condition cosmetically I cannot give you a full refund. THIS IS VERY IMPORTANT. 6. NOTE: UNLESS YOU MAKE ARRANGEMENTS WITH US BEFORE YOU PURCHASE, YOU MUST PAY FOR ITEMS PURCHASED WITHIN 2 DAYS OR A CASE WILL BE OPENED FOR AN UNPAID ITEM!!! International customers  NOTE:1. Please wait for us to invoice you for the correct amount. If you have purchased more than one item, we must calculate how much the shipping will be. Shipping will be HIGHER due to insurance and shipping methods needed for expensive item totals. If you are buying only one item this will not be an issue. 2. NOTE: Under no circumstances will we state on a US customs a declared value of less than the sale price. This is an honesty issue. We are honest with everyone to the best of our ability to do so. We want you to trust that what we say is true. There cannot be that trust, if we make false statements knowingly to anyone. If your country has tariffs/taxes so high that they cause large numbers of normally honest folks to make false statements, we urge you to work for change of those laws. 3 NOTE: International buyers if you bought more than one item and want combined shipping it will ship in 2 days.4. NOTE: And all the Angels sang because the heavenly music was playing and it was turned all the way up.     Listing and template services provided by inkFrog

Mullard DY802. EHT Rectifier. Will be carefully packed for delivery.

Welcome to Vacuum Tube Depot llc! We have been one of the leading online suppliers of vacuum tubes for many years. Recently, we acquired a very large collection of tubes that we are excited to offer. We have tested and sold thousands of these tubes, and have many, many more to sell. After testing literally thousands of tubes from this collection, we have found only a small handful that did not test well. The vast majority tested strong. Buy with confidence, and if you are not happy with your purchase, you can send it back on your dime for a refund. We will combine shipping on multiple purchases within 5 days of the first auction ending. Payment must be made within 5 days or your purchase will be canceled and re-listed. We do not have the space to hold onto auctions for you for any longer than this. If you would like combined shipping, please wait to make payment until after we have sent your invoice. We send invoices each day after all auctions have ended for that day. Combined shipping can only be combined with this shop, not other shops with similar names. Thank you for shopping with Vacuum Tube Depot llc!

Please DO NOT pay until an eBay invoice is sent to you - thank you. Please DO NOT bid if you have less then 15 feedback ! Please DO NOT ask me to falsify shipping declaration .... Buy from a seller with 23 years on eBay with 100% feedback :-) For your consideration I have 2 highly prized Mullard 12AU7 valves made circa 1957 at the Blackburn factory in England with matched 17mm long plates that test high - also note matching date codes my Audiophile friends love these 8H production goal post getter valves - superb for your vintage mono blocks or stereo amplifier - if you want your amp to sing then these are must :-) my photos show good detail - good luck. Tube 1 = 11.5/11.5ma & 2.6/2.6gm both platesTube 2 = 11.5/12.0ma & 2.6/2.6gm both plates AVO MK4 new average = 10.5ma & 2.2gm on each plate Please read my recent 100% feedback and consider my photos as a reasonable and good representation of the item being auctioned - I pride myself with good packing ( no charge ) and with some goods I double box for safe arrival, pick up is always welcomed - if you have ANY questions please ask before bidding. Yes we combine shipping/postage on all our listings and ALL goods will be sent REGISTERED/TRACKED by Australia Post ( $3/registered/signature cost for Aussie customers ) in Australia. Shipping Internationally by Australia Post, this gives Tracking and or Signature on arrival and is a very good safe and reliable service I have used for 40 years :-) ** Please note : All electrical goods must be inspected/checked by a licenced electrical technician before any voltage is applied.

Here are 6 old valves that were found in a shed. I believe they were originally from an old TV. I was curious as to what they were so put them to one side. The set of 6 valves are untested and therefore, sold as seen as historic electrical items. They are many decades old and will have age-wear so cannot guarantee any functionality. Some appear discoloured at the top. The writing has faded/disappeared on some of the tubes, however, I did manage to read some text on 4 of them: Mullard EF184 BVA MADE IN GREAT BRITAIN Pinnacle FOREIGN JAN 83 DY802 PCL86 PY 88 foreign Please study the photos for further details. I hope it helps someone. Thanks for looking.

Mullard DY802. EHT Rectifier. Will be carefully packed for delivery.

Vintage Mullard PCF802 Pentode valve. The PCF802 was designed as the first stages in television line frequency generation prior to the line output stage. The pentode is described by Mullard as the oscillator.

Vintage Mullard PCF802 Pentode valve. The PCF802 was designed as the first stages in television line frequency generation prior to the line output stage. The pentode is described by Mullard as the oscillator.

Mullard DY802. EHT Rectifier. Will be carefully packed for delivery.