Template CDGSlightly scratched and dirtyBLU Description MICRO BL-101 It has a few scratches on the corners, but other than that its in great condition. The belt may be deteriorated, so it is the current condition. Payment We accept PayPal only. Please make a payment within 3 days after send my invoice. Shipping Free shipping! We will ship by EMS?FedEx?DHL(Insured, Trackable, Including handling cost.) EMS (takes 4~7 days, includes with insurance & a tracking number). EMS (Express Mail Service) is international mailing service by Japan Post Office. We will ship your item within 2-5 business days, after your payment. We can ship ONLY to your Paypal address. About Us Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior. International Buyers - Please Note: ?Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. ?Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. ?These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. ?We do not mark merchandise values below value or mark items as “gifts” - US and International government regulations prohibit such behavior.

This is very rare tonearm made by Micro seki, model MA-202L, with base. This is long type version of MA-202 tonearm with VTA only. Tonearm wire comes directly from tonearm. Original headshell is included. Audio Technica AT-14E cartridge is included but it does not have stylus. I checked the sound output on my system. Specification: Model Dynamic balance type Model Static balance type Effective length 252mm Overhang 15mm Offset angle 21° Maximum tracking error 1.5° or less Compatible cartridge weight 4-16g (9-21g with additional weight) Stylus pressure variable range 0-3g ? Released in 1977 /////////////////////////////// NOTE: 1. Dont share personal information or ask me contact outside eBay as well as offer me purchase outside eBay. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

Early Micro seiki MA-303 tonearm with lifter, arm rest. This is no technical issue, working perfectly. Specification: A static balanced tonearm based on the MA-202 and shortened. The rotary bearing part uses the MA-202 as it is, and the initial sensitivity is 5 mg vertically and 10 mg horizontally by using a highly accurate pivot and a unique angular bearing for the vertical bearing of the rotating part. A special elastic material is used in the bearing to prevent resonance. Resonance is prevented by filling the inside of the arm pipe with damping material. Total length 302mm (283-302mm) Effective length 222mm Height adjustment range 43mm to 86mm (from motor board surface to pivot center) Offset angle 21°30 Overhang 15mm Tracking error 2° or less Please check business term before bidding on my item /////////////////////////////// NOTE: 1. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

It is very very rare turntable RX-5000 with RY-1500D motor. Perfect working condition, motor is quite silent and accuracy. There are some light marks but in overall it is beautiful one. It uses gun metal flatter which research by Micro seiki for best sound ever. Flatter is 20kg, base is approximately 30kg. Motor is about 7kg, so the total weight is about 60kg, shipping fee is expensive. It can be used with up to 4 tonearms and tonearm. It is very easily to adjust over hang too, so it is highly recommended to one who want to use turntable with many tonearm rotation. Please check business term before bidding on my item. ///////////////////////////////NOTE: 1. Dont share personal information or ask me contact outside eBay as well as offer me purchase outside eBay. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

This is a Tonearm Base for the Micro Seiki BL-91 turntable. It is made from gunmetal and weighs 1480 grams. For use with SME-Arms.

This is the first 12 inches long tonearm manufactured by Micro seiki, model MA-88L, it is long version of MA-77L tonearm. Perfect condition with original box, cable and original headshell. There are 2 type of coundter weight, side balanced one and self balanced counter weight. This item included self balanced counter weight. Tonearm specification: The rotation mechanism uses micro-sized ball bearings in both vertical and lateral directions. A light alloy pipe is used for the pipe part. Furthermore, the strength of the pipe itself and the method of coupling with other parts have been studied, and the use of appropriate rubber dampers has eliminated harmful resonance that impairs sound quality and records. It is a static balance type with high stability, and by adopting a stylus pressure application system with a simple and reliable sub-weight, troubles due to complication of the mechanism are prevented. The lateral balance can be adjusted wby using the eccentric main weight. Rotating the main weight changes the center of gravity of the arm. Adjustment of stylus pressure is a direct reading system, and a linear scale allows critical adjustment without a stylus pressure gauge. Since the output is taken out with a plug-in connector, work such as lead wire soldering is unnecessary. In addition, 0.05? combination single wire is used for the lead wire passing through the inside of the arm considering the influence on the rotational sensitivity. The head shell uses a lightweight type. Comes with a mechanism for inside force cancellation. The arm parallelism gauge is carried. When adjusting the height of the arm, you can see at a glance whether it is parallel to the turntable surface. Regarding the cancellation of the inside force, in order to reduce the trouble, a mechanism (bias cursor, bias weight) is added to improve the movement and characteristics of the arm by applying a force (outside force) that moves the arm in the outer peripheral direction in advance. I am attaching it. This mechanism uses a string of bias weights threaded through the grooves of the bias cursor. In this case, the outside force increases as the thread is passed through the grooves outside the center of rotation of the arm, so it can be adjusted according to the stylus pressure and the condition of the record surface. The same headshell as the accessory was also sold as an option. *How to adjust balance and stylus pressure Place the side weight for stylus pressure application at the base of the cursor where the stylus pressure is zero. In this state, when the main weight is slid and the needle of the arm parallelism gauge overlaps with the mark on the side of the pipe arm, the front and rear mass balance of the arm is perfectly balanced. Lock the main weights in this position and slide the side weights forward according to the scale to the desired position. In addition, if it is difficult to balance with an extremely light cartridge, insert the attached weight plate between the cartridge and the shell for balance. Please check business term before bidding on my item /////////////////////////////// NOTE: 1. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

This is very rare tonearm made by Micro seki, model MA-202L, with base. This is long type version of MA-202 tonearm with VTA only. Tonearm wire comes directly from tonearm. Original headshell is included. I checked the sound output on my system. Specification: Model Dynamic balance type Model Static balance type Effective length 252mm Overhang 15mm Offset angle 21° Maximum tracking error 1.5° or less Compatible cartridge weight 4-16g (9-21g with additional weight) Stylus pressure variable range 0-3g ? Released in 1977 /////////////////////////////// NOTE: 1. Dont share personal information or ask me contact outside eBay as well as offer me purchase outside eBay. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

????Including & Condition Details:As shown in photos. Please check the photos for details. ????Shipping: FedEx ????Message from SellerHi, my name is Danny Chou. I live in Tokyo, Japan. I can speak quite fluent English :)I can source anything you want from Japan! Feel free to contact me anytime! ??Check Your AddressPlease check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed. ??Tracking & PackingPackages: Box or envelope and Bubble wrapWe provide valid Tracking Numbers for all orders.All our international packages will be shipped by FedEx or DHL. ??ReturnWe offer a standard FREE 60 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund. ????Customs DutyImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

MICRO SEIKI DQX-500 DIRECT DRIVE TURNTABLE with TONEARM + DENON MC CARTRIDGEvery good sounding decksuper heavy buildoff board power supply33 + 45 speedswith manualsjust as picturedcomes with a Michell dust cover and record weightthe mains cable on the psu is quite shorta few light marks and signs of life

Early Micro seiki MA-77Mk1 tonearm with original headshell, lifter, arm rest, sub weight. This is the first tonearm of Micro seiki, beautiful condition, no technical issue, working perfectly. Please check business term before bidding on my item /////////////////////////////// NOTE: 1. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

Early Micro seiki MA-303 tonearm with lifter, arm rest. This is no technical issue, working perfectly. Specification: A static balanced tonearm based on the MA-202 and shortened. The rotary bearing part uses the MA-202 as it is, and the initial sensitivity is 5 mg vertically and 10 mg horizontally by using a highly accurate pivot and a unique angular bearing for the vertical bearing of the rotating part. A special elastic material is used in the bearing to prevent resonance. Resonance is prevented by filling the inside of the arm pipe with damping material. Total length 302mm (283-302mm) Effective length 222mm Height adjustment range 43mm to 86mm (from motor board surface to pivot center) Offset angle 21°30 Overhang 15mm Tracking error 2° or less Please check business term before bidding on my item /////////////////////////////// NOTE: 1. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

Early Micro seiki MA-77Mk1 tonearm with original headshell, lifter, arm rest, sub weight. This is the first tonearm of Micro seiki, beautiful condition, no technical issue, working perfectly. Please check business term before bidding on my item /////////////////////////////// NOTE: 1. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

Early Micro seiki MA-303 tonearm with lifter, arm rest. This is no technical issue, working perfectly. Specification: A static balanced tonearm based on the MA-202 and shortened. The rotary bearing part uses the MA-202 as it is, and the initial sensitivity is 5 mg vertically and 10 mg horizontally by using a highly accurate pivot and a unique angular bearing for the vertical bearing of the rotating part. A special elastic material is used in the bearing to prevent resonance. Resonance is prevented by filling the inside of the arm pipe with damping material. Total length 302mm (283-302mm) Effective length 222mm Height adjustment range 43mm to 86mm (from motor board surface to pivot center) Offset angle 21°30 Overhang 15mm Tracking error 2° or less Please check business term before bidding on my item /////////////////////////////// NOTE: 1. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

Early Micro seiki MA-77Mk1 tonearm with original headshell, lifter, arm rest, sub weight. This is the first tonearm of Micro seiki, beautiful condition, no technical issue, working perfectly. Please check business term before bidding on my item /////////////////////////////// NOTE: 1. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

You are looking at the *MICRO DD-6/DD-7/DD-35/DD-40 Tonearm Arm Lifter Bar / MICRO SEIKI Condition: May have a few minor signs of use. *Dont forget to check our other items to view more cool stuff. Well be glad to combine shipping! Express Shipping : 3 - 10 days. Standard Shipping : 7 -14 days. Economy Shipping : 10 - 28 days. Duties and Local Tax are not included.These charges are the buyers responsibility. if you have any question, please feel free to contact me!

Early Micro seiki MA-303 tonearm with lifter, arm rest. This is no technical issue, working perfectly. Specification: A static balanced tonearm based on the MA-202 and shortened. The rotary bearing part uses the MA-202 as it is, and the initial sensitivity is 5 mg vertically and 10 mg horizontally by using a highly accurate pivot and a unique angular bearing for the vertical bearing of the rotating part. A special elastic material is used in the bearing to prevent resonance. Resonance is prevented by filling the inside of the arm pipe with damping material. Total length 302mm (283-302mm) Effective length 222mm Height adjustment range 43mm to 86mm (from motor board surface to pivot center) Offset angle 21°30 Overhang 15mm Tracking error 2° or less Please check business term before bidding on my item /////////////////////////////// NOTE: 1. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

This is very rare tonearm manufactured by Micro seiki, model MA-705. This tonearm used titanium armward, same as MA-808X. Armbase is gun metal material. Specification: This arm adopts a mass concentration method for the structure of the rotating shaft. Moreover, it has a structure that suppresses partial resonance. Oxygen-free copper coaxial cable is used for the internal wire, which suppresses transmission loss and shuts out external induction noise, thereby suppressing sound quality deterioration. Effective length 237mm Stylus pressure variable range 0g to 3g Applicable cartridge weight 11.5g ~ 21g (including shell) Please check business term before bidding on my item /////////////////////////////// NOTE: 1. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

Early Micro seiki MA-77Mk1 tonearm with original headshell, lifter, arm rest, sub weight. This is the first tonearm of Micro seiki, beautiful condition, no technical issue, working perfectly. Please check business term before bidding on my item /////////////////////////////// NOTE: 1. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

Micro seiki MA-505Mk2 dynamic balance tonearm with VTA on fly, original cable VG. It works perfectly, no technical issue. This is dynamic balance tonearm not static balance. VTA on fly mechanism help you change tonearm height as it is working on record. Please check business term before bidding on my item /////////////////////////////// NOTE: 1. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

MICRO SEIKI CF-1 TONEARM SIMILAR TO A MA101 SOME EXCEPTIONS ARE THE CF-1 HAS A CARBON FIBER WAND AND IS UNIVERSAL IN DESIGN. I BOUGHT THIS AWHILE BACK FOR A PROJECT AS I HAD A MICRO HEADSHELL THAT NEEDED FINGERLIFT REPAIR SEE PICS. THE ARM NEEDED A TONEARM REST. I COULDNT FIND A REST SO TRIMED AND GLUED ONE ON (it holds tight) SEE PICS. SELLING AS-IS AT A VERY REASONABLE PRICE JUST REDUCED PRICE 10%. NOW $382.50 THANK YOU

Template CDGSlightly scratched and dirtyBLU Description MICRO MA-505L long tone arm MICRO cable etc. included This is the long arm type of MICRO MA-505.This model allows you to adjust the stylus pressure even while playing, making it easy to set the sound to your liking.The ultra-low-range resonance is deep, giving a clean sound texture and stabilizing the overall sound. ?Condition: Each part has been polished/cleaned. There are some dullness and scratches on the arm, butThere are no major scratches and it is shiny.There is no noticeable damage to accessories such as cables. This is a used item that has been around for a number of years.Please note that there may be scratches/dullness/feeling due to age/use. ?OperationOperation has been confirmed using our equipment.?Output from both channels?Lifter descending speed (oil refilled)?Each adjustment point, operation feeling?Height adjustment, etc.There is no problem with operation. ?Product contentsManufacturer: MICROModel number: MA-505L ?Product detailshttp://20cheaddatebase.web.fc2.com/needie/NDmicro/MA-505L.html ?Accessories?Head shell (MICRO)?Lateral weight (small)?Main weight?Mounting nut/washer?PHONO cable (MICRO)?Instruction manual (copy)?Template A, B (copy) Payment We accept PayPal only. Please make a payment within 3 days after send my invoice. Shipping Free shipping! We will ship by EMS?FedEx?DHL(Insured, Trackable, Including handling cost.) EMS (takes 4~7 days, includes with insurance & a tracking number). EMS (Express Mail Service) is international mailing service by Japan Post Office. We will ship your item within 2-5 business days, after your payment. We can ship ONLY to your Paypal address. About Us Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior. International Buyers - Please Note: ?Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. ?Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. ?These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. ?We do not mark merchandise values below value or mark items as “gifts” - US and International government regulations prohibit such behavior.

It is very very rare turntable RX-5000 with RY-1500D motor. Perfect working condition, motor is quite silent and accuracy. There are some light marks but in overall it is beautiful one. It uses gun metal flatter which research by Micro seiki for best sound ever. Flatter is 20kg, base is approximately 30kg. Motor is about 7kg, so the total weight is about 60kg, shipping fee is expensive. It can be used with up to 4 tonearms and tonearm. It is very easily to adjust over hang too, so it is highly recommended to one who want to use turntable with many tonearm rotation. Please check business term before bidding on my item. ///////////////////////////////NOTE: 1. Dont share personal information or ask me contact outside eBay as well as offer me purchase outside eBay. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

This is very rare tonearm manufactured by Micro seiki, model MA-705. This tonearm used titanium armward, same as MA-808X. Armbase is gun metal material. Specification: This arm adopts a mass concentration method for the structure of the rotating shaft. Moreover, it has a structure that suppresses partial resonance. Oxygen-free copper coaxial cable is used for the internal wire, which suppresses transmission loss and shuts out external induction noise, thereby suppressing sound quality deterioration. Effective length 237mm Stylus pressure variable range 0g to 3g Applicable cartridge weight 11.5g ~ 21g (including shell) Please check business term before bidding on my item /////////////////////////////// NOTE: 1. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

Early Micro seiki MA-303 tonearm with lifter, arm rest. This is no technical issue, working perfectly. Specification: A static balanced tonearm based on the MA-202 and shortened. The rotary bearing part uses the MA-202 as it is, and the initial sensitivity is 5 mg vertically and 10 mg horizontally by using a highly accurate pivot and a unique angular bearing for the vertical bearing of the rotating part. A special elastic material is used in the bearing to prevent resonance. Resonance is prevented by filling the inside of the arm pipe with damping material. Total length 302mm (283-302mm) Effective length 222mm Height adjustment range 43mm to 86mm (from motor board surface to pivot center) Offset angle 21°30 Overhang 15mm Tracking error 2° or less Please check business term before bidding on my item /////////////////////////////// NOTE: 1. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////