Marantz HD 88 HD88 Lautsprecher Boxen Speakers Bassreflex bei einem Lautsprecher sind beide Hochtöner ohne Funktion, eventuell nur ein Wackelkontakt Abholung oder Lieferung per Spedition Shipping worldwide. Please ask for shipping costs to your country. Der Verkauf von Gebrauchtwaren erfolgt nach den Grundsätzen der Differenzbesteuerung(§ 25a UStG). Ein gesonderter Ausweis der Mehrwertsteuer erfolgt nicht. International buyers outside Europe please note:All offered goods have the condition (both visually and technically) as read in the item description and seen in the pictures. If needed I can send you more pictures (or a video in case of technical devices about the functionality). You will receive pictures of the packaging and packaging method before shipping. Only when you agree to this, the shipment will take place. By making a purchase, you agree to the following terms:I the seller do not take any responsibility for transport damages. Furthermore, you as a buyer agree to abandon any form of return for technical devices, even if the device contrary to expectation does not work as described with you. If you do not agree, I would ask you to refrain from a purchase.

This is the tweeter used in the Marantz speakers listed in the title. Tested and working as it should, and sounding great. It suffers some cosmetic issues such as scratching and indentations on the face plate, as well as indentations on the dome. The dome is not torn or punctured. Fully functional.

1 Set MARANTZ L-Pad Controls from HD880 Speaker. Tested in Working Condition.

MARANTZ 2 Soft Dome Super Tweeter #841-1051-200G Japan from HD880 Speaker. Tested in Working Condition.

Track Page Views WithAuctivas Counter

Marantz HD880 Trim Plate Super TweeterTweeterMid Range PAIR Please see pics for condition

Marantz HD880 Trim Plate Super TweeterTweeterMid Range PAIR Please see pics for condition

ITEM TESTED AND WORKING, ITEM HAS SOME WEAR/RUST, SELLING AS IS PLEASE LOOK CAREFULLY AT ALL PICTURES PROVIDED FOR CONTENTS/CONDITION BEFORE MAKING SELECTION NO APO/FPO ADDRESS PLEASE! ALSO NO SHIPPING TO PUERTO RICO/GUAM OR U.S VIRGIN ISLANDS

1 Set MARANTZ L-Pad Controls from HD880 Speaker. Tested in Working Condition.

MARANTZ 1 Soft Dome Super Tweeter #841-1051-200G Japan from HD880 Speaker. Tested in Working Condition.

MARANTZ 1 Soft Dome Super Tweeter #841-1050-000 Japan from HD880 Speaker. Tested in Working Condition.

GS Audio Inc. is not the owner or seller of these goods but merely a bailee acting on behalf of the seller to facilitate the sale of the goods by holding the goods until a sale is completed and the goods are shipped to the buyer. GS Audio Inc. has used its best efforts to inspect the item(s) for sale, create descriptions, and furnish photographs that fairly and adequately depict the goods type, condition, and image at the time of purchase. GS Audio Inc. makes no express or implied warranties or representations regarding the condition or suitability of the goods and, to the extent allowed by law, expressly disclaims any express or implied warranties, including but not limited to any warranty of merchantability or fitness for purpose. GS Audio Inc. reserves the right to cancel bids on any item due to feedback. This Listing Powered By Track Page Views WithAuctivas Counter

MARANTZ HD88 HD SOFT DOME TWEETER #841-1050-000Dselling tested in working condition , being sold in used pre-owned condition pull out from a Marantz HD-88 speakers ships with fedex ground properly pack final sale no return no refund

To whom ever is watching, this is your last chance, soon as my free listings are done, so are these parts. They will get donated to the round file, or to a local audiophile. Get them while you still can. Nuff said. =/ More from the ongoing clean out. Just do not need these drivers anymore, or the controllers, have had them for at least a decade...just sitting in the a/cd walk in closet. =/ Controls include all six pots, all six knobs, both panels, and all the wiring you see pictured. One price for all of it, including all four mids/drivers/speakers, etc. Acquired these back when I was restoring my HD cabinets, now they need a new home. These probably fit all of the larger MARANTZ HD series cabinets as far as I can recall. Some of them came from bigger cabinets that I parted out, HD880, etc, etc. The ohms readings are written on the back of the magnets as you can see, took those readings a decade ago. Had a good fluke meter at that time, do not have a working meter presently. Have not tested them as of late, have no reason to believe they have any issues. All my stuff sits in a climate controlled walk in closet when not in use. =) If you need/want some original HD series, VINTAGE mids, and or controls, here you go folks. =) Here is your chance to have all four VINTAGE MARANTZ drivers, for basically the expense of one Elcheapo driver, made you know where today. =( Shipping will be flat rate. Thanks for stopping to take a look, and as always, have fun EBAYING!!! =)

More from the ongoing clean out. Just do not need these drivers anymore, or the controllers, have had them for at least a decade...just sitting in the a/cd walk in closet. =/ Controls include all six pots, all six knobs, both panels, and all the wiring you see pictured. One price for all of it, including all four mids/drivers/speakers, etc. Acquired these back when I was restoring my HD cabinets, now they need a new home. These probably fit all of the larger MARANTZ HD series cabinets as far as I can recall. Some of them came from bigger cabinets that I parted out, HD880, etc, etc. The ohms readings are written on the back of the magnets as you can see, took those readings a decade ago. Had a good fluke meter at that time, do not have a working meter presently. Have not tested them as of late, have no reason to believe they have any issues. All my stuff sits in a climate controlled walk in closet when not in use. =) If you need/want some original HD series, VINTAGE mids, and or controls, here you go folks. =) Here is your chance to have all four VINTAGE MARANTZ drivers, for basically the expense of one Elcheapo driver, made you know where today. =( Shipping will be flat rate. Thanks for stopping to take a look, and as always, have fun EBAYING!!! =)

More from the ongoing clean out. Just do not need these drivers, have had them for at least a decade..just sitting in the closet. =/....Now including the controllers, all six pots, all six knobs, both panels, and all the wiring you see pictured. One price for all of it, including all four mids/drivers/speakers, etc. Acquired these back when I was restoring my HD550, now they need a new home. These probably fit all of the larger MARANTZ HD series cabinets as far as I can recall. Some of them came from bigger cabinets that I parted out, HD880, etc, etc. The ohms readings are written on the back of the magnets as you can see, took those readings a decade ago. Had a good fluke meter at that time, do not have a working meter presently. Have not tested them as of late, have no reason to believe they have any issues. All my stuff sits in a climate controlled walk in closet when not in use. =) If you need/want some original HD series, VINTAGE mids, here you go folks. Get them now, before they get traded for something else, donated to the local Goodwill, or taken to the curb for the scrap man. Im done looking at them, need them gone asap. Am packing for a move I plan to make within two years, so I am ridding myself of ALL unneeded stuff NOW. =) Here is your chance to have all four VINTAGE MARANTZ drivers, for basically the expense of one Elcheapo, made in you know where today. =( Shipping will be flat rate, I am not taking a bath on shipping these. They will take time to properly package, and Im already basically giving them away at this asking amount. =/ Thanks for stopping to take a look, and as always, have fun EBAYING!!! =)

More from the ongoing clean out. Just do not need these drivers, have had them for at least a decade..just sitting in the closet. =/....Now including the controllers, all six pots, all six knobs, both panels, and all the wiring you see pictured. One price for all of it, including all four mids/drivers/speakers, etc. Acquired these back when I was restoring my HD550, now they need a new home. These probably fit all of the larger MARANTZ HD series cabinets as far as I can recall. Some of them came from bigger cabinets that I parted out, HD880, etc, etc. The ohms readings are written on the back of the magnets as you can see, took those readings a decade ago. Had a good fluke meter at that time, do not have a working meter presently. Have not tested them as of late, have no reason to believe they have any issues. All my stuff sits in a climate controlled walk in closet when not in use. =) If you need/want some original HD series, VINTAGE mids, here you go folks. Get them now, before they get traded for something else, donated to the local Goodwill, or taken to the curb for the scrap man. Im done looking at them, need them gone asap. Am packing for a move I plan to make within two years, so I am ridding myself of ALL unneeded stuff NOW. =) Here is your chance to have all four VINTAGE MARANTZ drivers, for basically the expense of one Elcheapo, made in you know where today. =( Shipping will be flat rate, I am not taking a bath on shipping these. They will take time to properly package, and Im already basically giving them away at this asking amount. =/ Thanks for stopping to take a look, and as always, have fun EBAYING!!! =)

More from the ongoing clean out. Just do not need these drivers, have had them for at least a decade..just sitting in the closet. =/....Now including the controllers, all six pots, all six knobs, both panels, and all the wiring you see pictured. One price for all of it, including all four mids/drivers/speakers, etc. Acquired these back when I was restoring my HD550, now they need a new home. These probably fit all of the larger MARANTZ HD series cabinets as far as I can recall. Some of them came from bigger cabinets that I parted out, HD880, etc, etc. The ohms readings are written on the back of the magnets as you can see, took those readings a decade ago. Had a good fluke meter at that time, do not have a working meter presently. Have not tested them as of late, have no reason to believe they have any issues. All my stuff sits in a climate controlled walk in closet when not in use. =) If you need/want some original HD series, VINTAGE mids, here you go folks. Get them now, before they get traded for something else, donated to the local Goodwill, or taken to the curb for the scrap man. Im done looking at them, need them gone asap. Am packing for a move I plan to make within two years, so I am ridding myself of ALL unneeded stuff NOW. =) Here is your chance to have all four VINTAGE MARANTZ drivers, for basically the expense of one Elcheapo, made in you know where today. =( Shipping will be flat rate, I am not taking a bath on shipping these. They will take time to properly package, and Im already basically giving them away at this asking amount. =/ Thanks for stopping to take a look, and as always, have fun EBAYING!!! =)

More from the ongoing clean out. Just do not need these drivers, have had them for at least a decade..just sitting in the closet. =/....Now including the controllers, all six pots, all six knobs, both panels, and all the wiring you see pictured. One price for all of it, including all four mids/drivers/speakers, etc. Acquired these back when I was restoring my HD550, now they need a new home. These probably fit all of the larger MARANTZ HD series cabinets as far as I can recall. Some of them came from bigger cabinets that I parted out, HD880, etc, etc. The ohms readings are written on the back of the magnets as you can see, took those readings a decade ago. Had a good fluke meter at that time, do not have a working meter presently. Have not tested them as of late, have no reason to believe they have any issues. All my stuff sits in a climate controlled walk in closet when not in use. =) If you need/want some original HD series, VINTAGE mids, here you go folks. Get them now, before they get traded for something else, donated to the local Goodwill, or taken to the curb for the scrap man. Im done looking at them, need them gone asap. Am packing for a move I plan to make within two years, so I am ridding myself of ALL unneeded stuff NOW. =) Here is your chance to have all four VINTAGE MARANTZ drivers, for basically the expense of one Elcheapo, made in you know where today. =( Shipping will be flat rate, I am not taking a bath on shipping these. They will take time to properly package, and Im already basically giving them away at this asking amount. =/ Thanks for stopping to take a look, and as always, have fun EBAYING!!! =)

More from the ongoing clean out. Just do not need these drivers, have had them for at least a decade..just sitting in the closet. =/....Now including the controllers, all six pots, all six knobs, both panels, and all the wiring you see pictured. One price for all of it, including all four mids/drivers/speakers, etc. Acquired these back when I was restoring my HD550, now they need a new home. These probably fit all of the larger MARANTZ HD series cabinets as far as I can recall. Some of them came from bigger cabinets that I parted out, HD880, etc, etc. The ohms readings are written on the back of the magnets as you can see, took those readings a decade ago. Had a good fluke meter at that time, do not have a working meter presently. Have not tested them as of late, have no reason to believe they have any issues. All my stuff sits in a climate controlled walk in closet when not in use. =) If you need/want some original HD series, VINTAGE mids, here you go folks. Get them now, before they get traded for something else, donated to the local Goodwill, or taken to the curb for the scrap man. Im done looking at them, need them gone asap. Am packing for a move I plan to make within two years, so I am ridding myself of ALL unneeded stuff NOW. =) Here is your chance to have all four VINTAGE MARANTZ drivers, for basically the expense of one Elcheapo, made in you know where today. =( Shipping will be flat rate, I am not taking a bath on shipping these. They will take time to properly package, and Im already basically giving them away at this asking amount. =/ Thanks for stopping to take a look, and as always, have fun EBAYING!!! =)

More from the ongoing clean out. Just do not need these drivers, have had them for at least a decade..just sitting in the closet. =/ Acquired these back when I was restoring my HD550, now they need a new home. These probably fit all of the larger MARANTZ HD series cabinets as far as I can recall. Some of them came from bigger cabinets that I parted out, HD880, etc, etc. The ohms readings are written on the back of the magnets as you can see, took those readings a decade ago. Had a good fluke meter at that time, do not have a working meter presently. Have not tested them as of late, have no reason to believe they have any issues. All my stuff sits in a climate controlled walk in closet when not in use. =) If you need/want some original HD series, VINTAGE mids, here you go folks. Get them now, before they get traded for something else, donated to the local Goodwill, or taken to the curb for the scrap man. Im done looking at them, need them gone asap. Am packing for a move I plan to make within two years, so I am ridding myself of ALL unneeded stuff NOW. =) Here is your chance to have all four VINTAGE MARANTZ drivers, for basically the expense of one Elcheapo, made in you know where today. =( Shipping will be flat rate, I am not taking a bath on shipping these. They will take time to properly package, and Im already basically giving them away at this asking amount. =/ Thanks for stopping to take a look, and as always, have fun EBAYING!!! =)

Marantz Dome SUPER tweeter from HD880 speakers, tweeter has blemishes but nothing broken or missing, and works well.

Marantz Dome super tweeter from HD880 speakers, tweeter has blermishes but nothing broken or missing, and works well.

Marantz Dome tweeter from HD880 speakers, tweeter has blmishes but nothing broken or missing, and works well.