You are buying a beautiful Krell Amplifier : Krell KSA-300S Amplifier this unit works as it should however has lot of scratches on the front face. ( remote is included) manuals are included as well. This amplifier plays on rca and xlr however on rca it makes sound hum on speakers but plays well Xlr plays normally without hummm BECAUSE ITS OLD EQUIPMENT MAY NEED RECAPPED PLEASE CONSIDER IT. Not Returns LOCAL PICK UP ONLY FLUSHING NY 11354

You are buying a beautiful Krell Reference 64 Digital Analog Converter DAC THE CONDITION IS USED Pictures are part of the description so please see them carefully and make your own conclusion about the item’s WHAT YOU SEE IS WHAT YOU GET Thanks for looking selling as the pictures shown. ABOUT SHIPPING Shipping Within US 48 Continental States Only (No shipping to Puerto Rico, Alaska, Hawaii) will be shipped by Fedex UPS Or USPS Ground according your location with free tracking number and It will be shipped thru the address provided by eBay so please make sure it's right during checkout! Feel free to any questions. NOT SHIPPING TO P.O BOX ADDRESSES For International buyer we will use eBay Global shipping option no exceptions. ABOUT RETURN Please contact seller if you have any inconvenience with your item, before open an eBay case or leave a negative feedback (There are many ways to solve any issue) Is very important for Us make our costumers happy’s. Buy with confidence ?????TOP SELLER ????? • See other items in our eBay page!!! https://www.ebay.com/str/jarvingracestore Technical description: The Reference 64 sports the entire Krell line's new styling. Dark gray-anodized aluminum panels are flanked by black aluminum sides, with a wide black panel running down the middle. The 64's appearance is serious and businesslike. (Incidentally, the Reference 64 replaces Krell's earlier SBP-64X processor.) The 64 comprises two chassis stacked atop one another. The lower chassis is the power supply and the top chassis contains the processor. Large heatsinks running down the power supply's sides provide a good visual match for the processor's black side panels. Two blue LEDs on the power supply indicate if the analog and digital supplies are working, and red LEDs on the processor show that the analog and digital supplies are present inside the processor. Two rows of five buttons each run down the processor's front panel, providing input selection, polarity reversal, digital tape monitor, and selection of Krell's Time Sync, a circuit that accepts a clock from a Krell transport on a separate line (more on this later). Each button is accompanied by a red LED to show that the function is engaged. Three additional LEDs indicate when the unit is locked to one of three sampling rates. All but one LED can be turned off with a front-panel button. The rear panel has an unusual connection method between the power supply and processor. Instead of by cables, the connection is made by a metal panel with four D-connectors mounted to it. These D-connectors fit into D-connectors on the power supply and DAC, electrically joining the power supply to the processor. This arrangement also mechanically joins the two chassis at the rear. The processor's front feet fit into shoes on the power supply that lock the two chassis together at the front. Specification: Description: Digital/analog converter with 64x-oversampling digital filter. Inputs: two coaxial on RCA jacks, one AES/EBU on XLR jack, one TosLink optical, one AT&T ST-type optical, separate Time Sync clock input (two additional digital inputs are provided for tape monitoring, one coaxial, one ST-type optical). Conversion: custom Krell DAC modules. Digital filtering: DSP-based 64x-oversampling filter running custom Krell software. Frequency response: 4Hz–20kHz, –0.1dB. S/N ratio: 100dB (A-weighted). Linearity: ±0.3dB at –90dB. THD+N: 0.011%. Channel separation: >111dB at 1kHz. Digital output: one coaxial on RCA jack. Analog outputs: unbalanced on RCA jacks, balanced on XLR jacks. Analog output voltage: 2.4V (unbalanced), 4.8V (balanced) at full-scale. Dimensions: 19 W by 5.63 H by 14 D. Shipping weight: 54 lbs. More information Krell Reference 64 digital processor | Stereophile.com

You are buying a beautiful Krell Reference 64 Digital Analog Converter DAC THE CONDITION IS USED Pictures are part of the description so please see them carefully and make your own conclusion about the item’s WHAT YOU SEE IS WHAT YOU GET Thanks for looking selling as the pictures shown. ABOUT SHIPPING Shipping Within US 48 Continental States Only (No shipping to Puerto Rico, Alaska, Hawaii) will be shipped by Fedex UPS Or USPS Ground according your location with free tracking number and It will be shipped thru the address provided by eBay so please make sure it's right during checkout! Feel free to any questions. NOT SHIPPING TO P.O BOX ADDRESSES For International buyer we will use eBay Global shipping option no exceptions. ABOUT RETURN Please contact seller if you have any inconvenience with your item, before open an eBay case or leave a negative feedback (There are many ways to solve any issue) Is very important for Us make our costumers happy’s. Buy with confidence ?????TOP SELLER ????? • See other items in our eBay page!!! https://www.ebay.com/str/jarvingracestore Technical description: The Reference 64 sports the entire Krell line's new styling. Dark gray-anodized aluminum panels are flanked by black aluminum sides, with a wide black panel running down the middle. The 64's appearance is serious and businesslike. (Incidentally, the Reference 64 replaces Krell's earlier SBP-64X processor.) The 64 comprises two chassis stacked atop one another. The lower chassis is the power supply and the top chassis contains the processor. Large heatsinks running down the power supply's sides provide a good visual match for the processor's black side panels. Two blue LEDs on the power supply indicate if the analog and digital supplies are working, and red LEDs on the processor show that the analog and digital supplies are present inside the processor. Two rows of five buttons each run down the processor's front panel, providing input selection, polarity reversal, digital tape monitor, and selection of Krell's Time Sync, a circuit that accepts a clock from a Krell transport on a separate line (more on this later). Each button is accompanied by a red LED to show that the function is engaged. Three additional LEDs indicate when the unit is locked to one of three sampling rates. All but one LED can be turned off with a front-panel button. The rear panel has an unusual connection method between the power supply and processor. Instead of by cables, the connection is made by a metal panel with four D-connectors mounted to it. These D-connectors fit into D-connectors on the power supply and DAC, electrically joining the power supply to the processor. This arrangement also mechanically joins the two chassis at the rear. The processor's front feet fit into shoes on the power supply that lock the two chassis together at the front. Specification: Description: Digital/analog converter with 64x-oversampling digital filter. Inputs: two coaxial on RCA jacks, one AES/EBU on XLR jack, one TosLink optical, one AT&T ST-type optical, separate Time Sync clock input (two additional digital inputs are provided for tape monitoring, one coaxial, one ST-type optical). Conversion: custom Krell DAC modules. Digital filtering: DSP-based 64x-oversampling filter running custom Krell software. Frequency response: 4Hz–20kHz, –0.1dB. S/N ratio: 100dB (A-weighted). Linearity: ±0.3dB at –90dB. THD+N: 0.011%. Channel separation: >111dB at 1kHz. Digital output: one coaxial on RCA jack. Analog outputs: unbalanced on RCA jacks, balanced on XLR jacks. Analog output voltage: 2.4V (unbalanced), 4.8V (balanced) at full-scale. Dimensions: 19 W by 5.63 H by 14 D. Shipping weight: 54 lbs. More information Krell Reference 64 digital processor | Stereophile.com