Great working condition with no issues to note. Professionally installed and just removed from my vehicle. Originally came with the Hertz MLK 165 set.

Listing includes (1) HERTZ MILLE ML POWER 1 Mono Amplifier 1000 W RMS Item is brand new in original packaging. Mille power amplifiers are born to fully enhance the outstanding performance of the Mille speakers. The new ADC (ADVANCED D-CLASS TECHNOLOGY) ensures pure listening pleasure while keeping a compact size with unmatched power efficiency. The heat sink, engineered with double technology, extrusion and aluminium die-casting, enables the Mille Power amplifiers to work constantly at full power without ever overheating, further maximizing thermal efficiency. The powerful mono Hertzaudio car amplifier ML Power 1 (1000 W – stable at 1 ?) is perfect to drive the Mille subwoofers. The filters combination adopted for the Mille Power line is extremely flexible and ensures they can be used in any configuration. The active crossovers of MLPower 1 feature a 24 dB/Oct. adjustable slope Lo-Pass filter to adapt to every need. The control section, protected by a removable panel, can be accessed from the top for an effortless tuning. Features:Mono subwoofer amplifier600 watts RMS x 1 at 4 ohms (1,000 watts RMS x 1 at 2 ohms)1,000 watts RMS x 1 at 1 ohmCEA-2006 compliantClass-D amplifier technologyFrequency response: 18-500 HzVariable low-pass filter (50-500 Hz, 24 dB/octave)Variable subsonic filter (18-40 Hz, 24 dB/octave)Variable phase adjustment (0-180°)Optional HRC BM wired remote control bass management knobPreamp and speaker-level inputsAutomatic Remote Turn-on with speaker-level inputsFuse rating: 40A x 3Wiring and hardware not included with amplifier (1/0-gauge power and ground wire recommended)Dimensions: 13-11/16W x 1-7/8H x 6-3/4D

Enhance your car audio experience with the HERTZ MLCX 2 TM.3 MILLE LEGEND 2-WAY CROSSOVERS. Designed to work seamlessly with ML700.3 and ML280.3 speakers, these component speakers boast a powerful RMS output of 100W. The 3in speaker size ensures crisp and clear audio quality, making your music come to life while on the road. Crafted by Hertz, a trusted brand in car audio, these speakers are perfect for anyone looking to upgrade their car's audio system. With its exceptional features and unmatched performance, the HERTZ MLCX 2 TM.3 is a must-have for any car enthusiast. So, go ahead and take your car audio experience to the next level with these amazing 2-WAY CROSSOVERS.

Hertz MLCX 2 TW.3 This is a new crossover set that was removed from a MLK1650.3 two-way set, it is unused. Crossover provides the ability to realize a bi-amplified system, that is, to connect two amplifiers, or anyway two separate channels, to the crossover, so making it possible to drive woofer and tweeter separately. The significant power increase with this configuration highlights all the features of the MLK 1650.3 Legend system, with all the advantages coming from the multi-amplification. Besides, thanks to the Mid-Contour and Hi-Contour controls, dedicated to the management of woofer cut-off frequency and tweeter cut-off frequency respectively, the cross-point can be varied. Through each of these two Contour controls, featuring a two-position selector, the system frequency response can be fine-tuned, adjusting it according to the different acoustics of the cars and the different speaker placements and, most of all, the listener can achieve their favorite sound. 2 Way Passive Crossover Woofer: Lo-pass 6 dB Oct. Tweeter: Hi-pass 12 dB Oct. Cut-off: 2.5 kHz (Mid/Hi-Cont. = ON) 3.5 kHz (Mid/Hi-Cont. = OFF) Adjustment: Tweeter +2 / 0 / -2 dB Hi-Boost: ON / OFF Hi-Contour: ON / OFF Mid-Contour: ON / OFF Bi-Amp: ON / OFF Power Handling: 300W Peak 150W RMS Bi-amplification available, selectable through appropriate hi-current rating switch with hi-current carrying capability Mid-Contour two-position control, for a linear mid-bass frequency response according to the woofers position in the car and the listeners favourite sound Hi-Contour two-position control, to select the tweeter hi-pass crossover point selection according to the tweeter position/angle towards the listener. Mid-Contour in conjunction with Hi-Contour provides the ability to use MLCX 2 TW.3 to build a two way system based on ML 1650.3 or ML 1800.3 woofer together with ML 280.3 tweeter Three-position switch for tweeter level adjustments in 2 dB steps, to fine-tune the transducers emission Hi-Boost control, selectable through appropriate switch, to provide better linearity of the tweeter emission above 10kHz when positioned not on axis to with the listener Extremely high quality bi-metallized 160V polyester film capacitors with ultra-low DF, for maximum sound transparency and neat mid/hi-frequencies

Introducing the HERTZ ML 1650.3 Mille Legend midwoofers, the perfect addition to your car audio system for top-quality sound. Designed with a 6.5 speaker size and capable of producing 125W RMS power, these speakers deliver crystal clear audio with a high sensitivity of 93dB. The brand of these woofers is Hertz, known for their superior quality in car audio equipment. The model, ML 1650.3 Mille Legend, is a popular choice for those seeking premium sound. These speakers are used but in great condition. Add these to your car audio setup and enjoy the ultimate audio experience.

Enhance your car audio experience with the HERTZ MLCX 2 TM.3 MILLE LEGEND 2-WAY CROSSOVERS. Designed to work seamlessly with ML700.3 and ML280.3 speakers, these component speakers boast a powerful RMS output of 100W. The 3in speaker size ensures crisp and clear audio quality, making your music come to life while on the road. Crafted by Hertz, a trusted brand in car audio, these speakers are perfect for anyone looking to upgrade their car's audio system. With its exceptional features and unmatched performance, the HERTZ MLCX 2 TM.3 is a must-have for any car enthusiast. So, go ahead and take your car audio experience to the next level with these amazing 2-WAY CROSSOVERS.

Hertz MLCX 2 TW.3 This is a new crossover set that was removed from a MLK1650.3 two-way set, it is unused. Crossover provides the ability to realize a bi-amplified system, that is, to connect two amplifiers, or anyway two separate channels, to the crossover, so making it possible to drive woofer and tweeter separately. The significant power increase with this configuration highlights all the features of the MLK 1650.3 Legend system, with all the advantages coming from the multi-amplification. Besides, thanks to the Mid-Contour and Hi-Contour controls, dedicated to the management of woofer cut-off frequency and tweeter cut-off frequency respectively, the cross-point can be varied. Through each of these two Contour controls, featuring a two-position selector, the system frequency response can be fine-tuned, adjusting it according to the different acoustics of the cars and the different speaker placements and, most of all, the listener can achieve their favorite sound. 2 Way Passive Crossover Woofer: Lo-pass 6 dB Oct. Tweeter: Hi-pass 12 dB Oct. Cut-off: 2.5 kHz (Mid/Hi-Cont. = ON) 3.5 kHz (Mid/Hi-Cont. = OFF) Adjustment: Tweeter +2 / 0 / -2 dB Hi-Boost: ON / OFF Hi-Contour: ON / OFF Mid-Contour: ON / OFF Bi-Amp: ON / OFF Power Handling: 300W Peak 150W RMS Bi-amplification available, selectable through appropriate hi-current rating switch with hi-current carrying capability Mid-Contour two-position control, for a linear mid-bass frequency response according to the woofers position in the car and the listeners favourite sound Hi-Contour two-position control, to select the tweeter hi-pass crossover point selection according to the tweeter position/angle towards the listener. Mid-Contour in conjunction with Hi-Contour provides the ability to use MLCX 2 TW.3 to build a two way system based on ML 1650.3 or ML 1800.3 woofer together with ML 280.3 tweeter Three-position switch for tweeter level adjustments in 2 dB steps, to fine-tune the transducers emission Hi-Boost control, selectable through appropriate switch, to provide better linearity of the tweeter emission above 10kHz when positioned not on axis to with the listener Extremely high quality bi-metallized 160V polyester film capacitors with ultra-low DF, for maximum sound transparency and neat mid/hi-frequencies

Hertz Mille Legend MLK1650.3 This is a new 2-way set from the latest Mille Legend line.these are Hertz top of the line, great sounding set and excellent build quality. Most states now charge tax on ebay purchases, Ebay will add your state taxes to the invoice.

Hertz Mille Legend ML700.3 New pair in original box (2 speakers) The ML 700.3 Legend car audio midrange features the V-cone geometry upgrade, the Neodymium magnet assembly and the three spoke anti-resonant aluminumalloy basket with vented holes. Thanks to these technologies, as well as the Boundary Free Surround, taking the diameter emission from 60 to 65 mm, the midrange will provide extended, properly damped low frequency response, as the component will be filtered especially at the low frequencies, for excellent combination with the ML 1800.3 Legend, to build an ultra-performing system for competitions. General Features: 3 Midrange Speakers Power Handling: Peak: 100 watts per pair / 50 watts each RMS: 50 watts per pair / 25 watts each Pressed-pulp cone with cotton fibres Neodymium Tweeter magnet CEA-2031 compliant speakers 4 ohms impedance Frequency Response: 200-20,000 Hz Sensitivity: 90 dB

Hertz Mille Legend MLK PA3.3 This is a new 3-way set comprised of 2-ML1650.3 woofers, 2-ML700.3 mids, 2-ML280.3 tweeters. This auction does not include any passive crossovers. This would be an active set requiring 6 channels of amplification, normally be used to power this set. Some states now charge tax on ebay purchases, this will be calculated on invoice if shipping to one of these states.

Hertz ML280.3These are the current model of Hertz Mille Legend line. New in box, unused and uninstalled. Features & Specifications: To improve the car audio tweeters which was considered a reference since its first introduction into the market is a quite challenging task which could only be performed by a continued evolution in time and maximum care for each detail that might affect sound.From these presuppositions the Hertz ML 280.3 Legend car audio speakers has been born. Through the FEA simulations, the electro-acoustic designers carried out an extensive research which led to the optimization of the Tetolon dome geometry, to minimize distortion. This optimization method led to a reviewed face plate geometry for improved frequency response and lower distortion. Another element of the tweeter especially important for sound is the rear acoustic chamber: the designers performed an exhaustive research on the geometry as well as on the employed damping material, achieving 50% increase in overall volume, to extend response to lower frequencies with 900Hz resonance frequency. 1.38” Neodymium Magnet TweetersPower Handling:180W Peak (Hi-Pass filtered @ 1,8kHz - 12dB Oct.)Impedance: 4-OhmsFrequency response: 1k - 28kHzSensitivity: 92dB SPLVoice coil Ø : 1.1”Cone/Dome: Tetolon

Hertz MLCX 2 TW.3 This is a new crossover set that was removed from a MLK1650.3 two-way set, it is unused. Crossover provides the ability to realize a bi-amplified system, that is, to connect two amplifiers, or anyway two separate channels, to the crossover, so making it possible to drive woofer and tweeter separately. The significant power increase with this configuration highlights all the features of the MLK 1650.3 Legend system, with all the advantages coming from the multi-amplification. Besides, thanks to the Mid-Contour and Hi-Contour controls, dedicated to the management of woofer cut-off frequency and tweeter cut-off frequency respectively, the cross-point can be varied. Through each of these two Contour controls, featuring a two-position selector, the system frequency response can be fine-tuned, adjusting it according to the different acoustics of the cars and the different speaker placements and, most of all, the listener can achieve their favorite sound. 2 Way Passive Crossover Woofer: Lo-pass 6 dB Oct. Tweeter: Hi-pass 12 dB Oct. Cut-off: 2.5 kHz (Mid/Hi-Cont. = ON) 3.5 kHz (Mid/Hi-Cont. = OFF) Adjustment: Tweeter +2 / 0 / -2 dB Hi-Boost: ON / OFF Hi-Contour: ON / OFF Mid-Contour: ON / OFF Bi-Amp: ON / OFF Power Handling: 300W Peak 150W RMS Bi-amplification available, selectable through appropriate hi-current rating switch with hi-current carrying capability Mid-Contour two-position control, for a linear mid-bass frequency response according to the woofers position in the car and the listeners favourite sound Hi-Contour two-position control, to select the tweeter hi-pass crossover point selection according to the tweeter position/angle towards the listener. Mid-Contour in conjunction with Hi-Contour provides the ability to use MLCX 2 TW.3 to build a two way system based on ML 1650.3 or ML 1800.3 woofer together with ML 280.3 tweeter Three-position switch for tweeter level adjustments in 2 dB steps, to fine-tune the transducers emission Hi-Boost control, selectable through appropriate switch, to provide better linearity of the tweeter emission above 10kHz when positioned not on axis to with the listener Extremely high quality bi-metallized 160V polyester film capacitors with ultra-low DF, for maximum sound transparency and neat mid/hi-frequencies

Hertz MLCX 2 TW.3 This is a new crossover set that was removed from a MLK1650.3 two-way set, it is unused. Crossover provides the ability to realize a bi-amplified system, that is, to connect two amplifiers, or anyway two separate channels, to the crossover, so making it possible to drive woofer and tweeter separately. The significant power increase with this configuration highlights all the features of the MLK 1650.3 Legend system, with all the advantages coming from the multi-amplification. Besides, thanks to the Mid-Contour and Hi-Contour controls, dedicated to the management of woofer cut-off frequency and tweeter cut-off frequency respectively, the cross-point can be varied. Through each of these two Contour controls, featuring a two-position selector, the system frequency response can be fine-tuned, adjusting it according to the different acoustics of the cars and the different speaker placements and, most of all, the listener can achieve their favorite sound. 2 Way Passive Crossover Woofer: Lo-pass 6 dB Oct. Tweeter: Hi-pass 12 dB Oct. Cut-off: 2.5 kHz (Mid/Hi-Cont. = ON) 3.5 kHz (Mid/Hi-Cont. = OFF) Adjustment: Tweeter +2 / 0 / -2 dB Hi-Boost: ON / OFF Hi-Contour: ON / OFF Mid-Contour: ON / OFF Bi-Amp: ON / OFF Power Handling: 300W Peak 150W RMS Bi-amplification available, selectable through appropriate hi-current rating switch with hi-current carrying capability Mid-Contour two-position control, for a linear mid-bass frequency response according to the woofers position in the car and the listeners favourite sound Hi-Contour two-position control, to select the tweeter hi-pass crossover point selection according to the tweeter position/angle towards the listener. Mid-Contour in conjunction with Hi-Contour provides the ability to use MLCX 2 TW.3 to build a two way system based on ML 1650.3 or ML 1800.3 woofer together with ML 280.3 tweeter Three-position switch for tweeter level adjustments in 2 dB steps, to fine-tune the transducers emission Hi-Boost control, selectable through appropriate switch, to provide better linearity of the tweeter emission above 10kHz when positioned not on axis to with the listener Extremely high quality bi-metallized 160V polyester film capacitors with ultra-low DF, for maximum sound transparency and neat mid/hi-frequencies

Hertz Mille Legend MLK1650.3 This is a new 2-way set from the latest Mille Legend line.these are Hertz top of the line, great sounding set and excellent build quality. Most states now charge tax on ebay purchases, Ebay will add your state taxes to the invoice.

Hertz Mille Legend ML700.3 New pair in original box (2 speakers) The ML 700.3 Legend car audio midrange features the V-cone geometry upgrade, the Neodymium magnet assembly and the three spoke anti-resonant aluminumalloy basket with vented holes. Thanks to these technologies, as well as the Boundary Free Surround, taking the diameter emission from 60 to 65 mm, the midrange will provide extended, properly damped low frequency response, as the component will be filtered especially at the low frequencies, for excellent combination with the ML 1800.3 Legend, to build an ultra-performing system for competitions. General Features: 3 Midrange Speakers Power Handling: Peak: 100 watts per pair / 50 watts each RMS: 50 watts per pair / 25 watts each Pressed-pulp cone with cotton fibres Neodymium Tweeter magnet CEA-2031 compliant speakers 4 ohms impedance Frequency Response: 200-20,000 Hz Sensitivity: 90 dB

Hertz Mille Legend MLK PA3.3 This is a new 3-way set comprised of 2-ML1650.3 woofers, 2-ML700.3 mids, 2-ML280.3 tweeters. This auction does not include any passive crossovers. This would be an active set requiring 6 channels of amplification, normally be used to power this set. Some states now charge tax on ebay purchases, this will be calculated on invoice if shipping to one of these states.

Hertz MLCX 2 TW.3 This is a new crossover set that was removed from a MLK1650.3 two-way set, it is unused. Crossover provides the ability to realize a bi-amplified system, that is, to connect two amplifiers, or anyway two separate channels, to the crossover, so making it possible to drive woofer and tweeter separately. The significant power increase with this configuration highlights all the features of the MLK 1650.3 Legend system, with all the advantages coming from the multi-amplification. Besides, thanks to the Mid-Contour and Hi-Contour controls, dedicated to the management of woofer cut-off frequency and tweeter cut-off frequency respectively, the cross-point can be varied. Through each of these two Contour controls, featuring a two-position selector, the system frequency response can be fine-tuned, adjusting it according to the different acoustics of the cars and the different speaker placements and, most of all, the listener can achieve their favorite sound. 2 Way Passive Crossover Woofer: Lo-pass 6 dB Oct. Tweeter: Hi-pass 12 dB Oct. Cut-off: 2.5 kHz (Mid/Hi-Cont. = ON) 3.5 kHz (Mid/Hi-Cont. = OFF) Adjustment: Tweeter +2 / 0 / -2 dB Hi-Boost: ON / OFF Hi-Contour: ON / OFF Mid-Contour: ON / OFF Bi-Amp: ON / OFF Power Handling: 300W Peak 150W RMS Bi-amplification available, selectable through appropriate hi-current rating switch with hi-current carrying capability Mid-Contour two-position control, for a linear mid-bass frequency response according to the woofers position in the car and the listeners favourite sound Hi-Contour two-position control, to select the tweeter hi-pass crossover point selection according to the tweeter position/angle towards the listener. Mid-Contour in conjunction with Hi-Contour provides the ability to use MLCX 2 TW.3 to build a two way system based on ML 1650.3 or ML 1800.3 woofer together with ML 280.3 tweeter Three-position switch for tweeter level adjustments in 2 dB steps, to fine-tune the transducers emission Hi-Boost control, selectable through appropriate switch, to provide better linearity of the tweeter emission above 10kHz when positioned not on axis to with the listener Extremely high quality bi-metallized 160V polyester film capacitors with ultra-low DF, for maximum sound transparency and neat mid/hi-frequencies

Hertz Mille Legend MLK1650.3 This is a new 2-way set from the latest Mille Legend line.these are Hertz top of the line, great sounding set and excellent build quality. Most states now charge tax on ebay purchases, Ebay will add your state taxes to the invoice.

Hertz Mille Legend ML700.3 New pair in original box (2 speakers) The ML 700.3 Legend car audio midrange features the V-cone geometry upgrade, the Neodymium magnet assembly and the three spoke anti-resonant aluminumalloy basket with vented holes. Thanks to these technologies, as well as the Boundary Free Surround, taking the diameter emission from 60 to 65 mm, the midrange will provide extended, properly damped low frequency response, as the component will be filtered especially at the low frequencies, for excellent combination with the ML 1800.3 Legend, to build an ultra-performing system for competitions. General Features: 3 Midrange Speakers Power Handling: Peak: 100 watts per pair / 50 watts each RMS: 50 watts per pair / 25 watts each Pressed-pulp cone with cotton fibres Neodymium Tweeter magnet CEA-2031 compliant speakers 4 ohms impedance Frequency Response: 200-20,000 Hz Sensitivity: 90 dB

Hertz Mille Legend MLK PA3.3 This is a new 3-way set comprised of 2-ML1650.3 woofers, 2-ML700.3 mids, 2-ML280.3 tweeters. This auction does not include any passive crossovers. This would be an active set requiring 6 channels of amplification, normally be used to power this set. Some states now charge tax on ebay purchases, this will be calculated on invoice if shipping to one of these states.

Hertz MLCX 2 TW.3 This is a new crossover set that was removed from a MLK1650.3 two-way set, it is unused. Crossover provides the ability to realize a bi-amplified system, that is, to connect two amplifiers, or anyway two separate channels, to the crossover, so making it possible to drive woofer and tweeter separately. The significant power increase with this configuration highlights all the features of the MLK 1650.3 Legend system, with all the advantages coming from the multi-amplification. Besides, thanks to the Mid-Contour and Hi-Contour controls, dedicated to the management of woofer cut-off frequency and tweeter cut-off frequency respectively, the cross-point can be varied. Through each of these two Contour controls, featuring a two-position selector, the system frequency response can be fine-tuned, adjusting it according to the different acoustics of the cars and the different speaker placements and, most of all, the listener can achieve their favorite sound. 2 Way Passive Crossover Woofer: Lo-pass 6 dB Oct. Tweeter: Hi-pass 12 dB Oct. Cut-off: 2.5 kHz (Mid/Hi-Cont. = ON) 3.5 kHz (Mid/Hi-Cont. = OFF) Adjustment: Tweeter +2 / 0 / -2 dB Hi-Boost: ON / OFF Hi-Contour: ON / OFF Mid-Contour: ON / OFF Bi-Amp: ON / OFF Power Handling: 300W Peak 150W RMS Bi-amplification available, selectable through appropriate hi-current rating switch with hi-current carrying capability Mid-Contour two-position control, for a linear mid-bass frequency response according to the woofers position in the car and the listeners favourite sound Hi-Contour two-position control, to select the tweeter hi-pass crossover point selection according to the tweeter position/angle towards the listener. Mid-Contour in conjunction with Hi-Contour provides the ability to use MLCX 2 TW.3 to build a two way system based on ML 1650.3 or ML 1800.3 woofer together with ML 280.3 tweeter Three-position switch for tweeter level adjustments in 2 dB steps, to fine-tune the transducers emission Hi-Boost control, selectable through appropriate switch, to provide better linearity of the tweeter emission above 10kHz when positioned not on axis to with the listener Extremely high quality bi-metallized 160V polyester film capacitors with ultra-low DF, for maximum sound transparency and neat mid/hi-frequencies

Hertz MLCX 2 TW.3 This is a new crossover set that was removed from a MLK1650.3 two-way set, it is unused. Crossover provides the ability to realize a bi-amplified system, that is, to connect two amplifiers, or anyway two separate channels, to the crossover, so making it possible to drive woofer and tweeter separately. The significant power increase with this configuration highlights all the features of the MLK 1650.3 Legend system, with all the advantages coming from the multi-amplification. Besides, thanks to the Mid-Contour and Hi-Contour controls, dedicated to the management of woofer cut-off frequency and tweeter cut-off frequency respectively, the cross-point can be varied. Through each of these two Contour controls, featuring a two-position selector, the system frequency response can be fine-tuned, adjusting it according to the different acoustics of the cars and the different speaker placements and, most of all, the listener can achieve their favorite sound. 2 Way Passive Crossover Woofer: Lo-pass 6 dB Oct. Tweeter: Hi-pass 12 dB Oct. Cut-off: 2.5 kHz (Mid/Hi-Cont. = ON) 3.5 kHz (Mid/Hi-Cont. = OFF) Adjustment: Tweeter +2 / 0 / -2 dB Hi-Boost: ON / OFF Hi-Contour: ON / OFF Mid-Contour: ON / OFF Bi-Amp: ON / OFF Power Handling: 300W Peak 150W RMS Bi-amplification available, selectable through appropriate hi-current rating switch with hi-current carrying capability Mid-Contour two-position control, for a linear mid-bass frequency response according to the woofers position in the car and the listeners favourite sound Hi-Contour two-position control, to select the tweeter hi-pass crossover point selection according to the tweeter position/angle towards the listener. Mid-Contour in conjunction with Hi-Contour provides the ability to use MLCX 2 TW.3 to build a two way system based on ML 1650.3 or ML 1800.3 woofer together with ML 280.3 tweeter Three-position switch for tweeter level adjustments in 2 dB steps, to fine-tune the transducers emission Hi-Boost control, selectable through appropriate switch, to provide better linearity of the tweeter emission above 10kHz when positioned not on axis to with the listener Extremely high quality bi-metallized 160V polyester film capacitors with ultra-low DF, for maximum sound transparency and neat mid/hi-frequencies

Hertz Mille Legend MLK PA3.3 This is a new 3-way set comprised of 2-ML1650.3 woofers, 2-ML700.3 mids, 2-ML280.3 tweeters. This auction does not include any passive crossovers. This would be an active set requiring 6 channels of amplification, normally be used to power this set. Some states now charge tax on ebay purchases, this will be calculated on invoice if shipping to one of these states.