Hertz MP250 D4.3 Mille Pro 10” Dual 4 Ohm Subwoofer In great condition and works great. It does have some scratches as shown in the pictures. I used it in the parallel configuration to make it 2 ohm. It comes with the original screws. One screw is a little bent but still works.

Listing includes (1) HERTZ MILLE ML POWER 1 Mono Amplifier 1000 W RMS Item is brand new in original packaging. Mille power amplifiers are born to fully enhance the outstanding performance of the Mille speakers. The new ADC (ADVANCED D-CLASS TECHNOLOGY) ensures pure listening pleasure while keeping a compact size with unmatched power efficiency. The heat sink, engineered with double technology, extrusion and aluminium die-casting, enables the Mille Power amplifiers to work constantly at full power without ever overheating, further maximizing thermal efficiency. The powerful mono Hertzaudio car amplifier ML Power 1 (1000 W – stable at 1 ?) is perfect to drive the Mille subwoofers. The filters combination adopted for the Mille Power line is extremely flexible and ensures they can be used in any configuration. The active crossovers of MLPower 1 feature a 24 dB/Oct. adjustable slope Lo-Pass filter to adapt to every need. The control section, protected by a removable panel, can be accessed from the top for an effortless tuning. Features:Mono subwoofer amplifier600 watts RMS x 1 at 4 ohms (1,000 watts RMS x 1 at 2 ohms)1,000 watts RMS x 1 at 1 ohmCEA-2006 compliantClass-D amplifier technologyFrequency response: 18-500 HzVariable low-pass filter (50-500 Hz, 24 dB/octave)Variable subsonic filter (18-40 Hz, 24 dB/octave)Variable phase adjustment (0-180°)Optional HRC BM wired remote control bass management knobPreamp and speaker-level inputsAutomatic Remote Turn-on with speaker-level inputsFuse rating: 40A x 3Wiring and hardware not included with amplifier (1/0-gauge power and ground wire recommended)Dimensions: 13-11/16W x 1-7/8H x 6-3/4D

Enhance your car audio experience with the HERTZ MLCX 2 TM.3 MILLE LEGEND 2-WAY CROSSOVERS. Designed to work seamlessly with ML700.3 and ML280.3 speakers, these component speakers boast a powerful RMS output of 100W. The 3in speaker size ensures crisp and clear audio quality, making your music come to life while on the road. Crafted by Hertz, a trusted brand in car audio, these speakers are perfect for anyone looking to upgrade their car's audio system. With its exceptional features and unmatched performance, the HERTZ MLCX 2 TM.3 is a must-have for any car enthusiast. So, go ahead and take your car audio experience to the next level with these amazing 2-WAY CROSSOVERS.

Hertz MLCX 2 TW.3 This is a new crossover set that was removed from a MLK1650.3 two-way set, it is unused. Crossover provides the ability to realize a bi-amplified system, that is, to connect two amplifiers, or anyway two separate channels, to the crossover, so making it possible to drive woofer and tweeter separately. The significant power increase with this configuration highlights all the features of the MLK 1650.3 Legend system, with all the advantages coming from the multi-amplification. Besides, thanks to the Mid-Contour and Hi-Contour controls, dedicated to the management of woofer cut-off frequency and tweeter cut-off frequency respectively, the cross-point can be varied. Through each of these two Contour controls, featuring a two-position selector, the system frequency response can be fine-tuned, adjusting it according to the different acoustics of the cars and the different speaker placements and, most of all, the listener can achieve their favorite sound. 2 Way Passive Crossover Woofer: Lo-pass 6 dB Oct. Tweeter: Hi-pass 12 dB Oct. Cut-off: 2.5 kHz (Mid/Hi-Cont. = ON) 3.5 kHz (Mid/Hi-Cont. = OFF) Adjustment: Tweeter +2 / 0 / -2 dB Hi-Boost: ON / OFF Hi-Contour: ON / OFF Mid-Contour: ON / OFF Bi-Amp: ON / OFF Power Handling: 300W Peak 150W RMS Bi-amplification available, selectable through appropriate hi-current rating switch with hi-current carrying capability Mid-Contour two-position control, for a linear mid-bass frequency response according to the woofers position in the car and the listeners favourite sound Hi-Contour two-position control, to select the tweeter hi-pass crossover point selection according to the tweeter position/angle towards the listener. Mid-Contour in conjunction with Hi-Contour provides the ability to use MLCX 2 TW.3 to build a two way system based on ML 1650.3 or ML 1800.3 woofer together with ML 280.3 tweeter Three-position switch for tweeter level adjustments in 2 dB steps, to fine-tune the transducers emission Hi-Boost control, selectable through appropriate switch, to provide better linearity of the tweeter emission above 10kHz when positioned not on axis to with the listener Extremely high quality bi-metallized 160V polyester film capacitors with ultra-low DF, for maximum sound transparency and neat mid/hi-frequencies

Introducing the HERTZ ML 1650.3 Mille Legend midwoofers, the perfect addition to your car audio system for top-quality sound. Designed with a 6.5 speaker size and capable of producing 125W RMS power, these speakers deliver crystal clear audio with a high sensitivity of 93dB. The brand of these woofers is Hertz, known for their superior quality in car audio equipment. The model, ML 1650.3 Mille Legend, is a popular choice for those seeking premium sound. These speakers are used but in great condition. Add these to your car audio setup and enjoy the ultimate audio experience.

Enhance your car audio experience with the HERTZ MLCX 2 TM.3 MILLE LEGEND 2-WAY CROSSOVERS. Designed to work seamlessly with ML700.3 and ML280.3 speakers, these component speakers boast a powerful RMS output of 100W. The 3in speaker size ensures crisp and clear audio quality, making your music come to life while on the road. Crafted by Hertz, a trusted brand in car audio, these speakers are perfect for anyone looking to upgrade their car's audio system. With its exceptional features and unmatched performance, the HERTZ MLCX 2 TM.3 is a must-have for any car enthusiast. So, go ahead and take your car audio experience to the next level with these amazing 2-WAY CROSSOVERS.

Hertz MLCX 2 TW.3 This is a new crossover set that was removed from a MLK1650.3 two-way set, it is unused. Crossover provides the ability to realize a bi-amplified system, that is, to connect two amplifiers, or anyway two separate channels, to the crossover, so making it possible to drive woofer and tweeter separately. The significant power increase with this configuration highlights all the features of the MLK 1650.3 Legend system, with all the advantages coming from the multi-amplification. Besides, thanks to the Mid-Contour and Hi-Contour controls, dedicated to the management of woofer cut-off frequency and tweeter cut-off frequency respectively, the cross-point can be varied. Through each of these two Contour controls, featuring a two-position selector, the system frequency response can be fine-tuned, adjusting it according to the different acoustics of the cars and the different speaker placements and, most of all, the listener can achieve their favorite sound. 2 Way Passive Crossover Woofer: Lo-pass 6 dB Oct. Tweeter: Hi-pass 12 dB Oct. Cut-off: 2.5 kHz (Mid/Hi-Cont. = ON) 3.5 kHz (Mid/Hi-Cont. = OFF) Adjustment: Tweeter +2 / 0 / -2 dB Hi-Boost: ON / OFF Hi-Contour: ON / OFF Mid-Contour: ON / OFF Bi-Amp: ON / OFF Power Handling: 300W Peak 150W RMS Bi-amplification available, selectable through appropriate hi-current rating switch with hi-current carrying capability Mid-Contour two-position control, for a linear mid-bass frequency response according to the woofers position in the car and the listeners favourite sound Hi-Contour two-position control, to select the tweeter hi-pass crossover point selection according to the tweeter position/angle towards the listener. Mid-Contour in conjunction with Hi-Contour provides the ability to use MLCX 2 TW.3 to build a two way system based on ML 1650.3 or ML 1800.3 woofer together with ML 280.3 tweeter Three-position switch for tweeter level adjustments in 2 dB steps, to fine-tune the transducers emission Hi-Boost control, selectable through appropriate switch, to provide better linearity of the tweeter emission above 10kHz when positioned not on axis to with the listener Extremely high quality bi-metallized 160V polyester film capacitors with ultra-low DF, for maximum sound transparency and neat mid/hi-frequencies

Hertz Mille Pro Series 6-1/2 3-way component set New unused speaker set. component system includes 2 woofers, 2 midrange speakers, 2 tweeters, and 2 external crossovers6-1/2 pressed pulp woofer with Boundary Free rubber surround3 pressed pulp midrange speaker with Boundary Free rubber surround1-3/16 Tetolon dome tweetercompact MPCX 3.3 outboard crossover2-position (0, +2) switches for tweeter and midrangehandles up to 150 watts RMS (300 watts peak power)frequency range: 40-22,500 Hzsensitivity: 92 dBwoofer top-mount depth: 2-1/2grilles includedMFR # MPK 163.3

HERTZ Mille Pro - MPX165.3 6.5 Coaxial Speakers. MPX 165.3 PRO New set of MPX Coax Speakers Great for Car or Harley installation. The coax tweeter concentric to the woofer of the MPX 165.3 car audio coaxial speakers allows for one single linear-phase emission point, for a natural timbre providing a detailed sound stage. Thanks to the “Center Tuning Duct” geometry, the tweeter resonance frequency is especially low and the employment of damping materials for the inside provides for a linear acoustic emission. The acoustic lens optimizes its off-axis response, which is typical with door installation of coax speakers; besides, the 36mm voicecoil and 165mm woofer generates deep and controlled bass frequencies. These are often used in fairing installs along with with MPX 690 in saddle bags. See my other auctions. Condition is New.

Hertz Mille Legend MLK1650.3 This is a new 2-way set from the latest Mille Legend line.these are Hertz top of the line, great sounding set and excellent build quality. Most states now charge tax on ebay purchases, Ebay will add your state taxes to the invoice.

Hertz Mille Legend ML700.3 New pair in original box (2 speakers) The ML 700.3 Legend car audio midrange features the V-cone geometry upgrade, the Neodymium magnet assembly and the three spoke anti-resonant aluminumalloy basket with vented holes. Thanks to these technologies, as well as the Boundary Free Surround, taking the diameter emission from 60 to 65 mm, the midrange will provide extended, properly damped low frequency response, as the component will be filtered especially at the low frequencies, for excellent combination with the ML 1800.3 Legend, to build an ultra-performing system for competitions. General Features: 3 Midrange Speakers Power Handling: Peak: 100 watts per pair / 50 watts each RMS: 50 watts per pair / 25 watts each Pressed-pulp cone with cotton fibres Neodymium Tweeter magnet CEA-2031 compliant speakers 4 ohms impedance Frequency Response: 200-20,000 Hz Sensitivity: 90 dB

Hertz Mille Legend MLK PA3.3 This is a new 3-way set comprised of 2-ML1650.3 woofers, 2-ML700.3 mids, 2-ML280.3 tweeters. This auction does not include any passive crossovers. This would be an active set requiring 6 channels of amplification, normally be used to power this set. Some states now charge tax on ebay purchases, this will be calculated on invoice if shipping to one of these states.

Hertz ML280.3These are the current model of Hertz Mille Legend line. New in box, unused and uninstalled. Features & Specifications: To improve the car audio tweeters which was considered a reference since its first introduction into the market is a quite challenging task which could only be performed by a continued evolution in time and maximum care for each detail that might affect sound.From these presuppositions the Hertz ML 280.3 Legend car audio speakers has been born. Through the FEA simulations, the electro-acoustic designers carried out an extensive research which led to the optimization of the Tetolon dome geometry, to minimize distortion. This optimization method led to a reviewed face plate geometry for improved frequency response and lower distortion. Another element of the tweeter especially important for sound is the rear acoustic chamber: the designers performed an exhaustive research on the geometry as well as on the employed damping material, achieving 50% increase in overall volume, to extend response to lower frequencies with 900Hz resonance frequency. 1.38” Neodymium Magnet TweetersPower Handling:180W Peak (Hi-Pass filtered @ 1,8kHz - 12dB Oct.)Impedance: 4-OhmsFrequency response: 1k - 28kHzSensitivity: 92dB SPLVoice coil Ø : 1.1”Cone/Dome: Tetolon

Hertz MLCX 2 TW.3 This is a new crossover set that was removed from a MLK1650.3 two-way set, it is unused. Crossover provides the ability to realize a bi-amplified system, that is, to connect two amplifiers, or anyway two separate channels, to the crossover, so making it possible to drive woofer and tweeter separately. The significant power increase with this configuration highlights all the features of the MLK 1650.3 Legend system, with all the advantages coming from the multi-amplification. Besides, thanks to the Mid-Contour and Hi-Contour controls, dedicated to the management of woofer cut-off frequency and tweeter cut-off frequency respectively, the cross-point can be varied. Through each of these two Contour controls, featuring a two-position selector, the system frequency response can be fine-tuned, adjusting it according to the different acoustics of the cars and the different speaker placements and, most of all, the listener can achieve their favorite sound. 2 Way Passive Crossover Woofer: Lo-pass 6 dB Oct. Tweeter: Hi-pass 12 dB Oct. Cut-off: 2.5 kHz (Mid/Hi-Cont. = ON) 3.5 kHz (Mid/Hi-Cont. = OFF) Adjustment: Tweeter +2 / 0 / -2 dB Hi-Boost: ON / OFF Hi-Contour: ON / OFF Mid-Contour: ON / OFF Bi-Amp: ON / OFF Power Handling: 300W Peak 150W RMS Bi-amplification available, selectable through appropriate hi-current rating switch with hi-current carrying capability Mid-Contour two-position control, for a linear mid-bass frequency response according to the woofers position in the car and the listeners favourite sound Hi-Contour two-position control, to select the tweeter hi-pass crossover point selection according to the tweeter position/angle towards the listener. Mid-Contour in conjunction with Hi-Contour provides the ability to use MLCX 2 TW.3 to build a two way system based on ML 1650.3 or ML 1800.3 woofer together with ML 280.3 tweeter Three-position switch for tweeter level adjustments in 2 dB steps, to fine-tune the transducers emission Hi-Boost control, selectable through appropriate switch, to provide better linearity of the tweeter emission above 10kHz when positioned not on axis to with the listener Extremely high quality bi-metallized 160V polyester film capacitors with ultra-low DF, for maximum sound transparency and neat mid/hi-frequencies

Hertz Mille Pro Series 6-1/2 3-way component set New unused speaker set. component system includes 2 woofers, 2 midrange speakers, 2 tweeters, and 2 external crossovers6-1/2 pressed pulp woofer with Boundary Free rubber surround3 pressed pulp midrange speaker with Boundary Free rubber surround1-3/16 Tetolon dome tweetercompact MPCX 3.3 outboard crossover2-position (0, +2) switches for tweeter and midrangehandles up to 150 watts RMS (300 watts peak power)frequency range: 40-22,500 Hzsensitivity: 92 dBwoofer top-mount depth: 2-1/2grilles includedMFR # MPK 163.3

Hertz Mille Pro Series MPK 1633 6.5 Three-Way Pro Audio Component System. Used in a store demo board. Works perfect. No box but the price is right beautiful sounding speakers.

HERTZ Mille Pro - MPX165.3 6.5 Coaxial Speakers. MPX 165.3 PRO New set of MPX Coax Speakers Great for Car or Harley installation. The coax tweeter concentric to the woofer of the MPX 165.3 car audio coaxial speakers allows for one single linear-phase emission point, for a natural timbre providing a detailed sound stage. Thanks to the “Center Tuning Duct” geometry, the tweeter resonance frequency is especially low and the employment of damping materials for the inside provides for a linear acoustic emission. The acoustic lens optimizes its off-axis response, which is typical with door installation of coax speakers; besides, the 36mm voicecoil and 165mm woofer generates deep and controlled bass frequencies. These are often used in fairing installs along with with MPX 690 in saddle bags. See my other auctions. Condition is New.

Hertz MLCX 2 TW.3 This is a new crossover set that was removed from a MLK1650.3 two-way set, it is unused. Crossover provides the ability to realize a bi-amplified system, that is, to connect two amplifiers, or anyway two separate channels, to the crossover, so making it possible to drive woofer and tweeter separately. The significant power increase with this configuration highlights all the features of the MLK 1650.3 Legend system, with all the advantages coming from the multi-amplification. Besides, thanks to the Mid-Contour and Hi-Contour controls, dedicated to the management of woofer cut-off frequency and tweeter cut-off frequency respectively, the cross-point can be varied. Through each of these two Contour controls, featuring a two-position selector, the system frequency response can be fine-tuned, adjusting it according to the different acoustics of the cars and the different speaker placements and, most of all, the listener can achieve their favorite sound. 2 Way Passive Crossover Woofer: Lo-pass 6 dB Oct. Tweeter: Hi-pass 12 dB Oct. Cut-off: 2.5 kHz (Mid/Hi-Cont. = ON) 3.5 kHz (Mid/Hi-Cont. = OFF) Adjustment: Tweeter +2 / 0 / -2 dB Hi-Boost: ON / OFF Hi-Contour: ON / OFF Mid-Contour: ON / OFF Bi-Amp: ON / OFF Power Handling: 300W Peak 150W RMS Bi-amplification available, selectable through appropriate hi-current rating switch with hi-current carrying capability Mid-Contour two-position control, for a linear mid-bass frequency response according to the woofers position in the car and the listeners favourite sound Hi-Contour two-position control, to select the tweeter hi-pass crossover point selection according to the tweeter position/angle towards the listener. Mid-Contour in conjunction with Hi-Contour provides the ability to use MLCX 2 TW.3 to build a two way system based on ML 1650.3 or ML 1800.3 woofer together with ML 280.3 tweeter Three-position switch for tweeter level adjustments in 2 dB steps, to fine-tune the transducers emission Hi-Boost control, selectable through appropriate switch, to provide better linearity of the tweeter emission above 10kHz when positioned not on axis to with the listener Extremely high quality bi-metallized 160V polyester film capacitors with ultra-low DF, for maximum sound transparency and neat mid/hi-frequencies

HERTZ Mille Pro - MPX165.3 6.5 Coaxial Speakers. MPX 165.3 PRO New set of MPX Coax Speakers Great for Car or Harley installation. The coax tweeter concentric to the woofer of the MPX 165.3 car audio coaxial speakers allows for one single linear-phase emission point, for a natural timbre providing a detailed sound stage. Thanks to the “Center Tuning Duct” geometry, the tweeter resonance frequency is especially low and the employment of damping materials for the inside provides for a linear acoustic emission. The acoustic lens optimizes its off-axis response, which is typical with door installation of coax speakers; besides, the 36mm voicecoil and 165mm woofer generates deep and controlled bass frequencies. These are often used in fairing installs along with with MPX 690 in saddle bags. See my other auctions. Condition is New.

Hi Ebayer!For auction is a pair(set of 2 speakers) of Hertz mid-range speakers. One of the best 3 inch speakers for automotive. Great natural sound. Happy bidding! !!!! World Wide Shipping !!!! The MP 70.3 car audio mid-range speakers featuring Neodymium double magnet inside the coil produces an enthralling mid range, perfect to combine with the powerful mid-low of the MP 165P.3 woofer as well as with the detailed high range of the MP25.3 tweeter. The 20 mm coil of the MP 70.3 maximizes the dynamics; the V-cone® profile enhances off-axis dispersion and the Boundary Free Surround allows for a wider extension towards the low frequency range. ComponentMid-rangeSize mm (in.)70 (3)Power Handling - Peak W100Power Handling - Peak Note(Hi-Pass filtered @250Hz - 12 dB Oct.)Impedance Ohm4Voice Coil Ø20 (0.8)Frequency Response Hz180 ÷ 18kMagnet size D x d x h mm (in.)19.7 x 0 x 2 (0.78 x 0 x 0.08)Weight of one speaker kg (lb.)0.17 (0.37)MagnetNeodymiumConePressed-pulp cone with cotton fibersTechnical Specs D mm65Re Ohm3,7Fs Hz110Le mH0,12Vas I1Mms g2,9Cms mm/N0,7BL T*m2,8Qts0,82Qes1Qms4,6Spl dB88Electro-acoustic Specs tags: dls, brax, helix, alpine, pioneer, eton, steg, zapco, ground zero, audio system, focal, kicker, morel

Hertz Mille Legend MLK1650.3 This is a new 2-way set from the latest Mille Legend line.these are Hertz top of the line, great sounding set and excellent build quality. Most states now charge tax on ebay purchases, Ebay will add your state taxes to the invoice.

Hertz Mille Legend ML700.3 New pair in original box (2 speakers) The ML 700.3 Legend car audio midrange features the V-cone geometry upgrade, the Neodymium magnet assembly and the three spoke anti-resonant aluminumalloy basket with vented holes. Thanks to these technologies, as well as the Boundary Free Surround, taking the diameter emission from 60 to 65 mm, the midrange will provide extended, properly damped low frequency response, as the component will be filtered especially at the low frequencies, for excellent combination with the ML 1800.3 Legend, to build an ultra-performing system for competitions. General Features: 3 Midrange Speakers Power Handling: Peak: 100 watts per pair / 50 watts each RMS: 50 watts per pair / 25 watts each Pressed-pulp cone with cotton fibres Neodymium Tweeter magnet CEA-2031 compliant speakers 4 ohms impedance Frequency Response: 200-20,000 Hz Sensitivity: 90 dB

Hertz Mille Legend MLK PA3.3 This is a new 3-way set comprised of 2-ML1650.3 woofers, 2-ML700.3 mids, 2-ML280.3 tweeters. This auction does not include any passive crossovers. This would be an active set requiring 6 channels of amplification, normally be used to power this set. Some states now charge tax on ebay purchases, this will be calculated on invoice if shipping to one of these states.

Hertz MLCX 2 TW.3 This is a new crossover set that was removed from a MLK1650.3 two-way set, it is unused. Crossover provides the ability to realize a bi-amplified system, that is, to connect two amplifiers, or anyway two separate channels, to the crossover, so making it possible to drive woofer and tweeter separately. The significant power increase with this configuration highlights all the features of the MLK 1650.3 Legend system, with all the advantages coming from the multi-amplification. Besides, thanks to the Mid-Contour and Hi-Contour controls, dedicated to the management of woofer cut-off frequency and tweeter cut-off frequency respectively, the cross-point can be varied. Through each of these two Contour controls, featuring a two-position selector, the system frequency response can be fine-tuned, adjusting it according to the different acoustics of the cars and the different speaker placements and, most of all, the listener can achieve their favorite sound. 2 Way Passive Crossover Woofer: Lo-pass 6 dB Oct. Tweeter: Hi-pass 12 dB Oct. Cut-off: 2.5 kHz (Mid/Hi-Cont. = ON) 3.5 kHz (Mid/Hi-Cont. = OFF) Adjustment: Tweeter +2 / 0 / -2 dB Hi-Boost: ON / OFF Hi-Contour: ON / OFF Mid-Contour: ON / OFF Bi-Amp: ON / OFF Power Handling: 300W Peak 150W RMS Bi-amplification available, selectable through appropriate hi-current rating switch with hi-current carrying capability Mid-Contour two-position control, for a linear mid-bass frequency response according to the woofers position in the car and the listeners favourite sound Hi-Contour two-position control, to select the tweeter hi-pass crossover point selection according to the tweeter position/angle towards the listener. Mid-Contour in conjunction with Hi-Contour provides the ability to use MLCX 2 TW.3 to build a two way system based on ML 1650.3 or ML 1800.3 woofer together with ML 280.3 tweeter Three-position switch for tweeter level adjustments in 2 dB steps, to fine-tune the transducers emission Hi-Boost control, selectable through appropriate switch, to provide better linearity of the tweeter emission above 10kHz when positioned not on axis to with the listener Extremely high quality bi-metallized 160V polyester film capacitors with ultra-low DF, for maximum sound transparency and neat mid/hi-frequencies