TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) mCN Philips ULTRA RARE COPPER ANODES LONG GREY PLATES 45° D-FOIL GETTER mCn ?R bottom code 0,9mA/0,9mA (2,9/3,0) 51/55 ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) mCN MINIWATT ULTRA RARE COPPER ANODES LONG GREY PLATES 45° D-FOIL GETTER mCn ?N bottom code 1,5mA/1,6mA (3,7/3,9) 56/58 ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) mCN Philips ULTRA RARE COPPER ANODES LONG GREY PLATES 45° D-FOIL GETTER mCn ?R bottom code 0,9mA/0,9mA (2,9/3,0) 51/55 ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) mCN MINIWATT ULTRA RARE COPPER ANODES LONG GREY PLATES 45° D-FOIL GETTER mCn ?N bottom code 1,5mA/1,6mA (3,7/3,9) 56/58 ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

2x Philips ECC83 Röhre long Plates D-Getter same mCN Code rare Pair top tested Bitte entnehmen Sie den genauen Zustand und Lieferumfang den Bildern.Die Röhren wurden auf einem Funke W19 als sehr gut geprüft. Die Prüfergebnisse der Prüfung in mA:4/3,53,6/3,6 Wir bieten eine Vielzahl an alten Bastel -und Sammelobjekten an.Bitte beachten Sie, dass aufgrund des Alters keine Garantien auf die technischen Funktionen gegeben werden können.The parts are very old, we dont give any guarantee on the technical function. Zahlung Versand Es ist möglich Artikel für den Versand zu kombinieren, die am gleichen Wochenende gekauft werden. Es ist nicht möglich Artikel aus mehreren Wochen zusammen zu versenden. Bitte warten Sie mit der Bezahlung, bis Sie die Rechnung mit kombinierten Versandkosten erhalten. Die angepasste Rechnung erhalten Sie dann Sonntags oder Montags nach Auktionsende. Aufwendiger Versand (klimaneutral) mit DHL Premium in 2-welliger Kartonage und aufwendiger Polsterung! Versand größtenteils plastikfrei, 80 Prozent des Versandmaterial aus recyceltem Altpapier bzw. Second-Hand Kartonagen. WORLDWIDE SHIPPING ON REQUEST! PLEASE ASK BEFORE YOU BUY! Links Unser Shop Verkäuferprofil Bewertungen Shop speichern Kontakt Newsletter Verpassen Sie keine Angebote mehr! Wir informieren Sie über Angebote und Aktionen bequem per E-Mail. Newsletter abonnieren Kontakt Senden Sie uns eine Nachricht

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) mCN Philips ULTRA RARE COPPER ANODES LONG GREY PLATES 45° D-FOIL GETTER mCn ?R bottom code 0,9mA/0,9mA (2,9/3,0) 51/55 ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) mCN MINIWATT ULTRA RARE COPPER ANODES LONG GREY PLATES 45° D-FOIL GETTER mCn ?N bottom code 1,5mA/1,6mA (3,7/3,9) 56/58 ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) mCN Philips ULTRA RARE COPPER ANODES LONG GREY PLATES 45° D-FOIL GETTER mCn ?R bottom code 0,9mA/0,9mA (2,9/3,0) 51/55 ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) mCN MINIWATT ULTRA RARE COPPER ANODES LONG GREY PLATES 45° D-FOIL GETTER mCn ?N bottom code 1,5mA/1,6mA (3,7/3,9) 56/58 ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

Angeboten wird eine ECC83 / 12AX7 hergestellt von Philips Herstellercode mCN ? K (= August1954) Label ist Telefunken (code xc) lange Anodenbleche / long plates, foil getter, Sehr guter neuwertiger Zustand, ohne Originalverpackung, siehe Fotos Alle Messwerte gemessen mit einem geeichten RoeTest V8 Meßsystem: Anodenstrom: System 1: 1,1mA System 2: 1,1mA (1,2mA =100%, gut ab 0,7mA ) Steilheit: System 1: 1,3mA/V System 2: 1,4mA/V (1,6mA/V =100%, gut ab 1,0mA/V) Das ist ein Privatverkauf, keineGarantie, keine Rücknahme. Versand in Deutschland nur als DHLPaket 5,49Euro. Shipping cost Europe (EU) as insuredDHL parcel 14,49Euro. Please ask for worldwide shipping costs (up to 50Eurodepending on country)

Angeboten wird eine ECC83 / 12AX7 hergestellt von Philips im Werk Heerlen Herstellercode mCN ? K (= August1954) Label ist Telefunken (code xc) lange Anodenbleche / long plates, foil getter, Sehr guter neuwertiger Zustand, ohne Originalverpackung, siehe Fotos Alle Messwerte gemessen mit einem geeichten RoeTest V8 Meßsystem: Anodenstrom: System 1: 1,1mA System 2: 1,1mA (1,2mA =100%, gut ab 0,7mA ) Steilheit: System 1: 1,3mA/V System 2: 1,4mA/V (1,6mA/V =100%, gut ab 1,0mA/V) Das ist ein Privatverkauf, keineGarantie, keine Rücknahme. Versand in Deutschland nur als DHLPaket 5,49Euro. Shipping cost Europe (EU) as insuredDHL parcel 14,49Euro. Please ask for worldwide shipping costs (up to 50Eurodepending on country)

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) mCN Philips ULTRA RARE COPPER ANODES LONG GREY PLATES 45° D-FOIL GETTER mCn ?R bottom code 0,9mA/0,9mA (2,9/3,0) 51/55 ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) mCN MINIWATT ULTRA RARE COPPER ANODES LONG GREY PLATES 45° D-FOIL GETTER mCn ?N bottom code 1,5mA/1,6mA (3,7/3,9) 56/58 ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

Angeboten wird eine ECC83 / 12AX7 hergestellt von Philips im Werk Heerlen Herstellercode mCN ? K (= August1954) Label ist Telefunken (code xc) lange Anodenbleche /longplates, foil getter, Sehr guter neuwertiger Zustand, ohne Originalverpackung, siehe Fotos Alle Messwerte gemessen mit einem geeichten RoeTest V8 Meßsystem: Anodenstrom: System 1: 1,1mA System 2: 1,1mA (1,2mA =100%, gut ab 0,7mA ) Steilheit: System 1: 1,3mA/V System 2: 1,4mA/V (1,6mA/V =100%, gut ab 1,0mA/V) Das ist ein Privatverkauf, keineGarantie, keine Rücknahme. Versand in Deutschland nur als DHLPaket 5,49Euro. Shipping cost Europe (EU) as insuredDHL parcel 14,49Euro. Please ask for worldwide shipping costs (up to 50Eurodepending on country)

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) mCN MINIWATT ULTRA RARE COPPER ANODES LONG GREY PLATES 45° D-FOIL GETTER mCn ?N bottom code 1,5mA/1,6mA (3,7/3,9) 56/58 ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) mCN Philips ULTRA RARE COPPER ANODES LONG GREY PLATES 45° D-FOIL GETTER mCn ?R bottom code 0,9mA/0,9mA (2,9/3,0) 51/55 ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

Angebotenwird eine ECC83 / 12AX7 hergestellt von Philips im Werk CopenhagenHerstellercode mCB D E von Mai 1954 Geschweisste lange Anodenbleche /long weldedplates, foil square getter, Sehr guter Zustand, ohne Originalverpackung, siehe Fotos Alle Messwerte gemessen mit einem geeichtenRoeTest V8 Meßsystem: Anodenstrom: System 1: 0,9mA System 2: 0,8mA (1,2mA =100%, gut ab 0,7mA ) Steilheit: System 1: 1,5mA/V System 2: 1,5mA/V (1,6mA/V =100%, gut ab 1,0mA/V) Das ist ein Privatverkauf, keineGarantie, keine Rücknahme. Versand in Deutschland nur als DHLPaket 5,49Euro. Shipping cost Europe (EU) as insuredDHL parcel 14,49Euro. Please ask for worldwide shipping costs (up to 50Eurodepending on country)

Angebotenwird eine ECC83 / 12AX7 hergestellt von Philips im Werk Heerlen Herstellercode mCN ? K (= August1954) Label ist Telefunken (code xc) lange Anodenbleche /longplates, foil getter, Sehr guter neuwertiger Zustand, ohneOriginalverpackung, siehe Fotos Alle Messwerte gemessen mit einem geeichtenRoeTest V8 Meßsystem: Anodenstrom: System 1: 1,1mA System 2:1,1 mA (1,2mA =100%, gut ab 0,7mA ) Steilheit: System 1: 1,3mA/V System 2:1,4mA/V (1,6mA/V =100%, gut ab 1,0mA/V) Das ist ein Privatverkauf, keineGarantie, keine Rücknahme. Versand in Deutschland nur als DHLPaket 5,49Euro. Shipping cost Europe (EU) as insuredDHL parcel 14,49Euro. Please ask for worldwide shipping costs (up to 50Eurodepending on country)

*** Seltene Philips Röhre mit guten Werten. Gemessen mit Funke W19: 2,6/2,7 mA, gut ab 1,9/1,9 mA. Long plates, foil horseshoe getter. Es gelten meine Messergebnisse. Keine Garantie, Rücknahme in begründeten Fällen möglich. Fragen werden gerne beantwortet. Shipping inside of European Union is mostly 12,99 € including shipment tracking.Other international bidders please ask for postage before biodding! No warranty. ***

Wir haben deinradio! Senden Sie uns eine Nachricht Unser Shop Verkäuferprofil Bewertungen Shop speichern Kontakt Philips ECC83 Röhre Rarität D-Getter mCN Code long Plates Triode sehr selten Bitte entnehmen Sie den genauen Zustand und Lieferumfang den Bildern.Die Röhre wurde auf einem Funke W19 als sehr gut geprüft. Die Ergebnisse der Messung in mA:3,2/2,5 Wir bieten eine Vielzahl an alten Bastel -und Sammelobjekten an.Bitte beachten Sie, dass aufgrund des Alters keine Garantien auf die technischen Funktionen gegeben werden können.The parts are very old, we dont give any guarantee on the technical function. Zahlung Versand Kombiversand nur bei Artikeln möglich, die am gleichen Tag gekauft werden. (aus einer Auktionsrunde) DIe angepasste Rechnung erhalten Sie dann nach Auktionsende. Aufwendiger Versand (klimaneutral) mit DHL Premium in 2-welliger Kartonage und aufwendiger Polsterung! Versand größtenteils plastikfrei, 80 Prozent des Versandmaterial aus recyceltem Altpapier bzw. Second-Hand Kartonagen. WORLDWIDE SHIPPING ON REQUEST! PLEASE ASK BEFORE YOU BUY! Links Unser Shop Verkäuferprofil Bewertungen Shop speichern Kontakt Newsletter Verpassen Sie keine Angebote mehr! Wir informieren Sie über Angebote und Aktionen bequem per E-Mail. Newsletter abonnieren Kontakt Senden Sie uns eine Nachricht

Angebotenwird eine ECC83 / 12AX7 hergestellt von Philips im Werk CopenhagenHerstellercode mCB D E von Mai 1954 Geschweisste lange Anodenbleche /long weldedplates, foil square getter, Sehr guter Zustand, ohne Originalverpackung, siehe Fotos Alle Messwerte gemessen mit einem geeichtenRoeTest V8 Meßsystem: Anodenstrom: System 1: 0,9mA System 2: 0,8mA (1,2mA =100%, gut ab 0,7mA ) Steilheit: System 1: 1,5mA/V System 2: 1,5mA/V (1,6mA/V =100%, gut ab 1,0mA/V) Das ist ein Privatverkauf, keineGarantie, keine Rücknahme. Versand in Deutschland nur als DHLPaket 5,49Euro. Shipping cost Europe (EU) as insuredDHL parcel 14,49Euro. Please ask for worldwide shipping costs (up to 50Eurodepending on country)

Angebotenwird eine ECC83 / 12AX7 hergestellt von Philips im Werk Heerlen Herstellercode mCN ? K (= August1954) Label ist Telefunken (code xc) lange Anodenbleche /longplates, foil getter, Sehr guter neuwertiger Zustand, ohneOriginalverpackung, siehe Fotos Alle Messwerte gemessen mit einem geeichtenRoeTest V8 Meßsystem: Anodenstrom: System 1: 1,1mA System 2:1,1 mA (1,2mA =100%, gut ab 0,7mA ) Steilheit: System 1: 1,3mA/V System 2:1,4mA/V (1,6mA/V =100%, gut ab 1,0mA/V) Das ist ein Privatverkauf, keineGarantie, keine Rücknahme. Versand in Deutschland nur als DHLPaket 5,49Euro. Shipping cost Europe (EU) as insuredDHL parcel 14,49Euro. Please ask for worldwide shipping costs (up to 50Eurodepending on country)

Angebotenwird eine ECC83 / 12AX7 hergestellt von Philips im Werk CopenhagenHerstellercode mCB D E von Mai 1954 Geschweisste lange Anodenbleche /long weldedplates, foil square getter, Sehr guter Zustand, ohne Originalverpackung, siehe Fotos Alle Messwerte gemessen mit einem geeichtenRoeTest V8 Meßsystem: Anodenstrom: System 1: 1,6mA System 2: 1,1mA (1,2mA =100%, gut ab 0,7mA ) Steilheit: System 1: 1,8mA/V System 2: 1,7mA/V (1,6mA/V =100%, gut ab 1,0mA/V) Das ist ein Privatverkauf, keineGarantie, keine Rücknahme. Versand in Deutschland nur als DHLPaket 5,49Euro. Shipping cost Europe (EU) as insuredDHL parcel 14,49Euro. Please ask for worldwide shipping costs (up to 50Eurodepending on country)

Angebotenwird eine ECC83 / 12AX7 hergestellt von Philips im Werk CopenhagenHerstellercode mCB D E von Mai 1954 Geschweisste lange Anodenbleche /long weldedplates, foil square getter, Sehr guter Zustand, ohne Originalverpackung, siehe Fotos Alle Messwerte gemessen mit einem geeichtenRoeTest V8 Meßsystem: Anodenstrom: System 1: 0,9mA System 2: 0,8mA (1,2mA =100%, gut ab 0,7mA ) Steilheit: System 1: 1,5mA/V System 2: 1,5mA/V (1,6mA/V =100%, gut ab 1,0mA/V) Das ist ein Privatverkauf, keineGarantie, keine Rücknahme. Versand in Deutschland nur als DHLPaket 5,49Euro. Shipping cost Europe (EU) as insuredDHL parcel 14,49Euro. Please ask for worldwide shipping costs (up to 50Eurodepending on country)