A classic configuration original DYNACO POWER CORD for original lover or Dynaco value enhancement project (Dynaco PAS preamplifier, ST-35, ST-70, SCA-35 amplifier) as pictured. Its pulled, in good clean condition (checked) Note: This beautiful classic configuration also suitable for Fisher, Pilot, Eico, Scott etc... vintage audio equipment and this selling is final (NO RETURN OR REFUND) Please buy or bid accordingly. Thanks for looking.

This is the legendary SCA-50 created by David Hafler in the 70s. Extremely clean and solid for its power rating. Along with the many inputs it also supplies 3- AC outlets 2-switched with the power switch and the other outlet servers as a through AC outlet for use with other components.SpecificationsPower output: 25 watts per channel into 8? (stereo)Frequency response: 15Hz to 45kHzTotal harmonic distortion: 0.25%Input sensitivity: 1.65mV (MM), 125mV (line)Channel separation: 60dB (line)Semiconductors: 2 x IC, 2 x FET, 17 x transistors, 24 x diodesDimensions: 13-1/2 x 12 x 4-1/4 inchesWeight: 15lbs

This is the legendary SCA-50 created by David Hafler in the 70s. Extremely clean and solid for its power rating. Along with the many inputs it also supplies 3- AC outlets 2-switched with the power switch and the other outlet servers as a through AC outlet for use with other components.SpecificationsPower output: 25 watts per channel into 8? (stereo)Frequency response: 15Hz to 45kHzTotal harmonic distortion: 0.25%Input sensitivity: 1.65mV (MM), 125mV (line)Channel separation: 60dB (line)Semiconductors: 2 x IC, 2 x FET, 17 x transistors, 24 x diodesDimensions: 13-1/2 x 12 x 4-1/4 inchesWeight: 15lbs

I have Dynaco SCA-35 selector switches that were removed from working amplifiers. They could use a good cleaning and perhaps tension adjustment, and so they are conservatively being sold for parts or as is, although they are likely fully functional. These are 5 position switches that short unused inputs. They are not being manufactured and AFAIK there are no substitutions.

Vintage Dynaco SCA-80Q Dimensional 4 AmplifierDescription The item on sale is a Vintage Dynaco SCA-80Q Dimensional 4 Amplifier, it powers on and in working condition. . Shipping is $20.00. If the picture do not show, please refresh your browser. . Payment I can accept paypal payment. Shipping All item is shipped via USPS or UPS within 3 business days after payment is received. Please allow up to 7 days for mail carrier to deliver your item. Communication: If you dont receive your item on time, please contact me as soon as possible. If there is any problem in the transaction, we can find the best solution. If there is any difficulty to fulfill the transaction, please lets understand each other with communication. Feedback When the transaction is complete, please share the proper feedback with the seller.

As off 7/4/2018 all parts will be shipped within 1-10 business days of receiving payment. I appreciate positive feedback and work hard to obtain it. I will block all who leave non positive feedback, and do not allow me to rectify the situation. Hundreds of thousands of hard to find vintage name brand and off brand solid state, turntable, speaker, and reel to reel parts in stock. I have 48 years of parts accumulation. I might have what you need. Contact me for all your parts needs. Thank you. joeoldaudio. Part swappers beware all my parts are marked. Let’s keep eBay fun. All unpaid item cases will result in buyer blocked from all future items. International buyers please note, all international shipments are sold via eBay global shipping program only. Custom forms or amounts will not be altered.

As off 7/4/2018 all parts will be shipped within 1-10 business days of receiving payment. I appreciate positive feedback and work hard to obtain it. I will block all who leave non positive feedback, and do not allow me to rectify the situation. Hundreds of thousands of hard to find vintage name brand and off brand solid state, turntable, speaker, and reel to reel parts in stock. I have 48 years of parts accumulation. I might have what you need. Contact me for all your parts needs. Thank you. joeoldaudio. Part swappers beware all my parts are marked. Let’s keep eBay fun. All unpaid item cases will result in buyer blocked from all future items. International buyers please note, all international shipments are sold via eBay global shipping program only. Custom forms or amounts will not be altered.

Retro Gear Shop is a high-end boutique store located in Nashville, Tennessee. Dynaco SCA-35 Stereo AmplifierTested and working. Unit works well, but our techs recommended it could use a general cleaning and a recap. We can perform this for additional cost if interested. In current condition it is sold as-is, no returns, refunds or warranties. From private collectors climate controlled home, likely unused for the past 15+ years. **Check out the pictures to make sure you like it. Pictures are of actual item for sale** Flat rate shipping in the USA. Discounted international shipping flat rate. Any questions please ask!

This is the legendary SCA-50 created by David Hafler in the 70s. Extremely clean and solid for its power rating. Along with the many inputs it also supplies 3- AC outlets 2-switched with the power switch and the other outlet servers as a through AC outlet for use with other components.SpecificationsPower output: 25 watts per channel into 8? (stereo)Frequency response: 15Hz to 45kHzTotal harmonic distortion: 0.25%Input sensitivity: 1.65mV (MM), 125mV (line)Channel separation: 60dB (line)Semiconductors: 2 x IC, 2 x FET, 17 x transistors, 24 x diodesDimensions: 13-1/2 x 12 x 4-1/4 inchesWeight: 15lbs

This is the legendary SCA-50 created by David Hafler in the 70s. Extremely clean and solid for its power rating. Along with the many inputs it also supplies 3- AC outlets 2-switched with the power switch and the other outlet servers as a through AC outlet for use with other components.SpecificationsPower output: 25 watts per channel into 8? (stereo)Frequency response: 15Hz to 45kHzTotal harmonic distortion: 0.25%Input sensitivity: 1.65mV (MM), 125mV (line)Channel separation: 60dB (line)Semiconductors: 2 x IC, 2 x FET, 17 x transistors, 24 x diodesDimensions: 13-1/2 x 12 x 4-1/4 inchesWeight: 15lbs

Up for auction is a vintage Dynaco amp and tuner. They are models SCA-35 and FM 3. They have been tested to power on only. No further testing has been done. Check my other listing for a pair of matching A-35 speakers.

This is the legendary SCA-50 created by David Hafler in the 70s. Extremely clean and solid for its power rating. Along with the many inputs it also supplies 3- AC outlets 2-switched with the power switch and the other outlet servers as a through AC outlet for use with other components.SpecificationsPower output: 25 watts per channel into 8? (stereo)Frequency response: 15Hz to 45kHzTotal harmonic distortion: 0.25%Input sensitivity: 1.65mV (MM), 125mV (line)Channel separation: 60dB (line)Semiconductors: 2 x IC, 2 x FET, 17 x transistors, 24 x diodesDimensions: 13-1/2 x 12 x 4-1/4 inchesWeight: 15lbs

DYNACO SCA-35 stereo tube amplifier METAL COVER for restoration projects as pictured, it pulled, in good condition as shown. Note: This selling is final (NO RETURN OR REFUND) Please buy or bid accordingly. Thanks for looking.

This is the legendary SCA-50 created by David Hafler in the 70s. Extremely clean and solid for its power rating. Along with the many inputs it also supplies 3- AC outlets 2-switched with the power switch and the other outlet servers as a through AC outlet for use with other components.SpecificationsPower output: 25 watts per channel into 8? (stereo)Frequency response: 15Hz to 45kHzTotal harmonic distortion: 0.25%Input sensitivity: 1.65mV (MM), 125mV (line)Channel separation: 60dB (line)Semiconductors: 2 x IC, 2 x FET, 17 x transistors, 24 x diodesDimensions: 13-1/2 x 12 x 4-1/4 inchesWeight: 15lbs

### The Audio Board: www.theAudioBoard.com - The Search Tool for Used High-End Audio Equipment### For sale is a vintage, one of the best sounding Dynaco SCA-35 Tube Amplifier, Factory Assembled The transformers are the same as those on Dynaco ST-35; considered one of the best sounding EL84-based amplifiers. This SCA-35 has been modified by the original owner to by-pass the phono and line stage. The input is fed by two RCA cables and is routed to the power amplifier unit. It works as a stereo power amplifier. It can be restored to original SCA-35 by some professional but I have no idea how. No tubes are included. I borrowed needed tubes for testing. The amp worked and produced good music but there was some hum. Apparently, this amp will need service first, before daily use. Physical condition is as shown. Front plate is fine but all knobs have been removed. The top cover has some rust. Bottom plate is present. Ill pack well and ship worldwide. I have other audio equipment, like Accuphase, Acurus, Adcom, Aragon, Arcam, Audio Research, Audioquest, Ayre, B&K, B&O, Bang Olufson, B&W, Bowers Wilkins, Bryston, California Audio Labs, Cary, Classe, Cambridge, Carver, Conrad Johnson, Creek, Denon, Dynaco, Dynaudio, Goldmund, Infinity, Jadis, JBL, Jolida, JM Lab, Kef, Kimber, Klipsch, Krell, Levinson, Lexicon, Linn, Marantz, Martin Logan, Mccormack, Mcintosh, Meridian, MIT, Musical Fidelity, Music Hall, NAD, Naim, Nakamichi, NHT, Paradigm, Parasound, Pass, Pioneer, Proceed, PS Audio, PSB, Quad, Rega, Revel, Rotel, Rowland, Sonic Frontiers, Sonus Faber, Spendor, Sunfire, Tandberg, Tannoy, Theta, Thiel, Threshold, Totem, Transparent, Vandersteen, Vmps, VPI, VTL, Velodyne, AR, Audio, Audiophile, Amplifier, Amps, Arcam, Acurus, Aragon, Adcom, ADS, Advent, Bose, Boston, Beovox, Bryston, Bedini, B&K, B&0, B&W, Bowers & Wilkins, Celestion, Counterpoint, Canton, Cello, Creek, Cerwin Vega, Dahlquist, Denon, Dcm, Dynaco, Dynaudio, Ess, Spica, Epicure, Ensemble, Electrostatic, Elite, Fisher, Fosgate, Harman kardon , Harbeth , Integra, Infinity, JBL, Jadis, Jolida, Linn, Luxman, KEF, Klipsch , KLH, Krell, Kenwood, Martin Logan, McIntosh, Mirage, Mission, Monitor Audio, Nad , Onkyo , Paradigm, Proac, Sony, Pioneer, Polk-Audio, Preamplifier, Quad ,Rogers, Rotel, Rega, Stanton, Speakers, Audio,Stereo,Studio, Vandersteen,, Snell, Spendor, Thorens, Vandersteen, Wharfedale, Yamaha, Speakers, Turntable, M&K, Accuphase, Dali, Wilson Audio, Sonus Faber, Definitive Technology, PSB, NHT, Magnepan, Eminent Technology, Monitor Audio, Vienna Acoustic, Meridian, Behringer, Acoustat, Genesis, Opera, Mirage, Energy, Pinnacle, Musical Fidelity, Sonic Frontiers, Cambridge Audio, Sunfire, Velodyne, SVS, HSU Research, Audio Research, Tannoy, Subwoofer, McCormack, Meadowlark, Conrad Johnson, Parasound, Magneplanar, Audible Illusions, Mark Levinson, Vintage, REL, Revel, Nakamichi, ESS, Emotiva.

Dynaco SCA-50 Stereo Amplifier Tested And Works?. Condition is Used. Shipped with USPS Ground Advantage. Tested works power button sticks sometimes when turning off but it’s not a issue you just pull it slightly and it functions normally

This is the legendary SCA-50 created by David Hafler in the 70s. Extremely clean and solid for its power rating. Along with the many inputs it also supplies 3- AC outlets 2-switched with the power switch and the other outlet servers as a through AC outlet for use with other components.SpecificationsPower output: 25 watts per channel into 8? (stereo)Frequency response: 15Hz to 45kHzTotal harmonic distortion: 0.25%Input sensitivity: 1.65mV (MM), 125mV (line)Channel separation: 60dB (line)Semiconductors: 2 x IC, 2 x FET, 17 x transistors, 24 x diodesDimensions: 13-1/2 x 12 x 4-1/4 inchesWeight: 15lbs

Dynaco Amplifier Sca-80 Ottime Condizioni. Video dimostrazione https://youtu.be/Z-j88aEeWqg

Dynaco SCA-80 Dynaquad Quad Audio Amplifier & AF-6 Am-Fm MPX Tuner GOOD WORKING Dynaco SCA-80 amp Works great and sounds really good . Overall clean working condition. May take a second or two to actually power up once power switch is engaged… No noise in pots or switches… clean sound.. Clean unit inside… the lids on BOTH UNITS were sanded and repainted… the original black began to fade and look dull… the paint is not perfect but looks clean… SEE PHOTOS… Dynaco AF-6 MPX TUNER Works great and pulls in strong signal and sound is full… Antenna for am is cracked SEE BLACK TAPE… also clip holding the end of unit is cracked off and is taped on… because of age of units small details like such will be normal over the years… This is a GREAT PAIR OF DYNACO UNITS… Looks Really nice and Sound great … BECAUSE OF AGE OF UNITS… I am selling as is… these were used and cared for and do not expect any issues… however to protect myself. Please be understanding NO RETURNS… Selling as is working condition… Any questions please ask!!

This is the legendary SCA-50 created by David Hafler in the 70s. Extremely clean and solid for its power rating. Along with the many inputs it also supplies 3- AC outlets 2-switched with the power switch and the other outlet servers as a through AC outlet for use with other components.SpecificationsPower output: 25 watts per channel into 8? (stereo)Frequency response: 15Hz to 45kHzTotal harmonic distortion: 0.25%Input sensitivity: 1.65mV (MM), 125mV (line)Channel separation: 60dB (line)Semiconductors: 2 x IC, 2 x FET, 17 x transistors, 24 x diodesDimensions: 13-1/2 x 12 x 4-1/4 inchesWeight: 15lbs

DYNACO small original OEM CONTROL KNOB for PAS 3 preamplifier, SCA-35 amplifier as pictured, its in good condition as shown, dimension = 3/4 diameter, pure aluminum metallic texture. Note: The US-Penny is using as relative scaling purpose only and this selling is final (no return or refund) Please buy or bid accordingly. Thanks for looking.

DYNACO SCA-35 TUBE AMPLIFIER FACEPLATE as pictured, it pulled, in used condition as shown (have scratch, dented around yet overall, its look OK and presentable) please take close look at all pictures to see its condition meet your minimum requirements, otherwise just pass it. Note: This selling is final (NO RETURN OR REFUND) Please buy or bib accordingly. Thanks for looking.

Dynaco SCA-80 Amplifier with FM-3 DynaTuner In Original Boxes.. These came from an estate sale and look like they were well cared for, they were stored in the original boxes. Some of the text has worn off the front of the amplifier, a few letters on the bottom row of the black switches. Otherwise these are both cosmetically in very good condition. I powered them on just to determine the lights came on and could hear a hum. No other testing was done. Probably best to assume they dont work. SOLD AS-IS

Ampli Dynaco Sca 35 Version 120v Made in Philadelphia USATransformateur externe 120v/220v offert pour utilisation européenne 220v En superbe état, entièrement révisé. Modifié pour accueillir les tubes 6GH8A en lieu est place des 7199. Opération effectuée par un professionnel de la hifi à tubes. La possibilité de revenir au 7199 est bien entendu possible. (Schéma fourni) Fonctionnement parfait. Vendu sans ses tubes el84. Prévoir un quartet appairé. Notice et facture d’époque fournies Spécifications: Puissance de sortie : 17,5 watts par canal en 8? (stéréo) Réponse en fréquence : 20 Hz à 20 kHz Distorsion harmonique totale : 1 % Sensibilité d'entrée : 4 mV (MM), 1000 m V (ligne) Rapport signal/bruit : 70 dB (MM), 80 dB (ligne) Complément de valve : 2 x 12AX7, 2 x 6GH8A, 4 x 6BQ5/EL-84/7189