This is a great Japanese integrated amplifier that I bought and imported from Japan. It is fully tested and all functions work as intended. All pots and switches have been cleaned and lubed with Deoxit 5. Please note that power cord has been replaced with something a little more heavy duty. I am offering the amp today with a small stepdown transformer at asking price, from 120v to 100v for Japanese domestic items, I have had great success with these. Below is specs available from the Denon History site. Main standards ?Power amplifier part Circuit method Differential amplification all stages direct connection pure comprehensive OCL circuit end stage silicon triple diffusion mesa transistor adopted Dynamic output 260W (130W+130W) (load 4? IHF standard) 164W (82W+82W) (load 8? IHF standard) Continuous output of sine wave Driven by both channels Rated output 1kHz 65W+65W (load 4? T.H.D. 0.05%) 1kHz 60W+60W (load 8? T.H.D. 0.05%) 20Hz to 20kHz 58W+58W (load 4? T.H.D. 0.1%) 20Hz to 20kHz 55W+55W (load 8? T.H.D. 0.1%) Total harmonic strain rate 0.1% or less (20Hz to 20kHz at sine wave rated output) Mixed modulation strain rate 60Hz/7kHz 0.1% or less (at sine wave rated output equivalent amplitude output) 4:1 0.05% or less (at the amplitude output equivalent to 1W of sine wave) Output bandwidth -1dB 10Hz to 35kHz (both channels drive load 8? T.H.D. 0.1%) -3dB 4Hz to 45kHz (both channels drive load 8? T.H.D. 0.1%) Frequency characteristics 10Hz to 50kHz (0.4dB at 0.1W to 0.5W output) Input sensitivity 1Vrms Input impedance 80k? (+10/-30%) (20Hz to 20kHz) Output impedance 0.16? or less Residual noise 0.5mV Output terminal Speaker A&B (load 4-16?) Headphones Stereo headphones compatible ?Preamp part Preamp output PRE AMP OUTPUT Maximum output/load impedance 14VPeak/50k? or more Rated output 1Vrms Total harmonic strain rate 0.05% or less (at 1kHz rated output) Equalizer amplifier output REC OUTPUT Maximum output 24VPeak/50k? or more Rated output 200mVrms Total harmonic strain rate 0.05% or less (10kHz/10Vrms) Input sensitivity/input impedance PHONO-1 2.3mVrms (60k? ±10%) PHONO-2 2.3mVrms (100k? ±10%) TUNER 200mVrms (100k? +10/-20%) AUX-1&2, TAPE-1&2 200mVrms (100k? +10/-20%) REC/PB (input) 500mVrms Maximum allowable input PHONO-1 200mVrms (1kHz) PHONO-2 200mVrms (1kHz) RIAA deviation PHONO-1&2 ±0.3dB (20Hz to 20kHz) S/N IHF-A Network PHONO-1 75dB or more (input terminal short circuit) PHONO-2 75dB or more (input terminal short circuit) TUNER 85dB or more (short circuit of input terminal) AUX-1&2 85dB or more (input terminal short circuit) TAPE-1&2 85dB or more (input terminal short circuit) Tone control part frequency characteristics 10Hz to 50kHz at TONE DEFEAT -0.4dB Tone control bending point/variable range BASS 640Hz/100Hz ±10dB TREBLE 1.6kHz/10kHz ±10dB Filter characteristics Low frequency 20Hz 12dB/oct Takagi 9kHz 12dB/oct Loudness control characteristics Low frequency 100Hz +8.5dB High frequency 10kHz +4dB Muteng -10dB, -20dB (for the level at 0dB) ?Comprehensive characteristics Channel separation PHONO?SPEAKER OUT 40 dB or more (20 kHz) Total harmonic strain rate Within 0.1% (20Hz to 20kHz at rated output) Transmission characteristics PHONO?SPEAKER OUT 20Hz to 20kHz (at ±0.4dB1W) ?Power outlet SWITCHED 2 pieces 250W UNSWITCHED 1 piece 150W ?Power supply AC100V 50/60Hz ?Power consumption 140W (according to the Electric Appliance and Material Control Act) ?Dimension 396W x 147H x 281D (m/m) ?Weight 11.2kg

This is a great Japanese integrated amplifier that I bought and imported from Japan. It is fully tested and all functions work as intended. All pots and switches have been cleaned and lubed with Deoxit 5. Please note that power cord has been replaced with something a little more heavy duty. I am offering the amp today with a small stepdown transformer at asking price, from 120v to 100v for Japanese domestic items, I have had great success with these. Below is specs available from the Denon History site. Main standards ?Power amplifier part Circuit method Differential amplification all stages direct connection pure comprehensive OCL circuit end stage silicon triple diffusion mesa transistor adopted Dynamic output 260W (130W+130W) (load 4? IHF standard) 164W (82W+82W) (load 8? IHF standard) Continuous output of sine wave Driven by both channels Rated output 1kHz 65W+65W (load 4? T.H.D. 0.05%) 1kHz 60W+60W (load 8? T.H.D. 0.05%) 20Hz to 20kHz 58W+58W (load 4? T.H.D. 0.1%) 20Hz to 20kHz 55W+55W (load 8? T.H.D. 0.1%) Total harmonic strain rate 0.1% or less (20Hz to 20kHz at sine wave rated output) Mixed modulation strain rate 60Hz/7kHz 0.1% or less (at sine wave rated output equivalent amplitude output) 4:1 0.05% or less (at the amplitude output equivalent to 1W of sine wave) Output bandwidth -1dB 10Hz to 35kHz (both channels drive load 8? T.H.D. 0.1%) -3dB 4Hz to 45kHz (both channels drive load 8? T.H.D. 0.1%) Frequency characteristics 10Hz to 50kHz (0.4dB at 0.1W to 0.5W output) Input sensitivity 1Vrms Input impedance 80k? (+10/-30%) (20Hz to 20kHz) Output impedance 0.16? or less Residual noise 0.5mV Output terminal Speaker A&B (load 4-16?) Headphones Stereo headphones compatible ?Preamp part Preamp output PRE AMP OUTPUT Maximum output/load impedance 14VPeak/50k? or more Rated output 1Vrms Total harmonic strain rate 0.05% or less (at 1kHz rated output) Equalizer amplifier output REC OUTPUT Maximum output 24VPeak/50k? or more Rated output 200mVrms Total harmonic strain rate 0.05% or less (10kHz/10Vrms) Input sensitivity/input impedance PHONO-1 2.3mVrms (60k? ±10%) PHONO-2 2.3mVrms (100k? ±10%) TUNER 200mVrms (100k? +10/-20%) AUX-1&2, TAPE-1&2 200mVrms (100k? +10/-20%) REC/PB (input) 500mVrms Maximum allowable input PHONO-1 200mVrms (1kHz) PHONO-2 200mVrms (1kHz) RIAA deviation PHONO-1&2 ±0.3dB (20Hz to 20kHz) S/N IHF-A Network PHONO-1 75dB or more (input terminal short circuit) PHONO-2 75dB or more (input terminal short circuit) TUNER 85dB or more (short circuit of input terminal) AUX-1&2 85dB or more (input terminal short circuit) TAPE-1&2 85dB or more (input terminal short circuit) Tone control part frequency characteristics 10Hz to 50kHz at TONE DEFEAT -0.4dB Tone control bending point/variable range BASS 640Hz/100Hz ±10dB TREBLE 1.6kHz/10kHz ±10dB Filter characteristics Low frequency 20Hz 12dB/oct Takagi 9kHz 12dB/oct Loudness control characteristics Low frequency 100Hz +8.5dB High frequency 10kHz +4dB Muteng -10dB, -20dB (for the level at 0dB) ?Comprehensive characteristics Channel separation PHONO?SPEAKER OUT 40 dB or more (20 kHz) Total harmonic strain rate Within 0.1% (20Hz to 20kHz at rated output) Transmission characteristics PHONO?SPEAKER OUT 20Hz to 20kHz (at ±0.4dB1W) ?Power outlet SWITCHED 2 pieces 250W UNSWITCHED 1 piece 150W ?Power supply AC100V 50/60Hz ?Power consumption 140W (according to the Electric Appliance and Material Control Act) ?Dimension 396W x 147H x 281D (m/m) ?Weight 11.2kg

This is a great Japanese integrated amplifier that I bought and imported from Japan. It is fully tested and all functions work as intended. All pots and switches have been cleaned and lubed with Deoxit 5. Please note that power cord has been replaced with something a little more heavy duty. I am offering the amp today with a small stepdown transformer from 120v to 100v for Japanese domestic items, I have had great success with these. Below is specs available from the Denon History site. Main standards ?Power amplifier part Circuit method Differential amplification all stages direct connection pure comprehensive OCL circuit end stage silicon triple diffusion mesa transistor adopted Dynamic output 260W (130W+130W) (load 4? IHF standard) 164W (82W+82W) (load 8? IHF standard) Continuous output of sine wave Driven by both channels Rated output 1kHz 65W+65W (load 4? T.H.D. 0.05%) 1kHz 60W+60W (load 8? T.H.D. 0.05%) 20Hz to 20kHz 58W+58W (load 4? T.H.D. 0.1%) 20Hz to 20kHz 55W+55W (load 8? T.H.D. 0.1%) Total harmonic strain rate 0.1% or less (20Hz to 20kHz at sine wave rated output) Mixed modulation strain rate 60Hz/7kHz 0.1% or less (at sine wave rated output equivalent amplitude output) 4:1 0.05% or less (at the amplitude output equivalent to 1W of sine wave) Output bandwidth -1dB 10Hz to 35kHz (both channels drive load 8? T.H.D. 0.1%) -3dB 4Hz to 45kHz (both channels drive load 8? T.H.D. 0.1%) Frequency characteristics 10Hz to 50kHz (0.4dB at 0.1W to 0.5W output) Input sensitivity 1Vrms Input impedance 80k? (+10/-30%) (20Hz to 20kHz) Output impedance 0.16? or less Residual noise 0.5mV Output terminal Speaker A&B (load 4-16?) Headphones Stereo headphones compatible ?Preamp part Preamp output PRE AMP OUTPUT Maximum output/load impedance 14VPeak/50k? or more Rated output 1Vrms Total harmonic strain rate 0.05% or less (at 1kHz rated output) Equalizer amplifier output REC OUTPUT Maximum output 24VPeak/50k? or more Rated output 200mVrms Total harmonic strain rate 0.05% or less (10kHz/10Vrms) Input sensitivity/input impedance PHONO-1 2.3mVrms (60k? ±10%) PHONO-2 2.3mVrms (100k? ±10%) TUNER 200mVrms (100k? +10/-20%) AUX-1&2, TAPE-1&2 200mVrms (100k? +10/-20%) REC/PB (input) 500mVrms Maximum allowable input PHONO-1 200mVrms (1kHz) PHONO-2 200mVrms (1kHz) RIAA deviation PHONO-1&2 ±0.3dB (20Hz to 20kHz) S/N IHF-A Network PHONO-1 75dB or more (input terminal short circuit) PHONO-2 75dB or more (input terminal short circuit) TUNER 85dB or more (short circuit of input terminal) AUX-1&2 85dB or more (input terminal short circuit) TAPE-1&2 85dB or more (input terminal short circuit) Tone control part frequency characteristics 10Hz to 50kHz at TONE DEFEAT -0.4dB Tone control bending point/variable range BASS 640Hz/100Hz ±10dB TREBLE 1.6kHz/10kHz ±10dB Filter characteristics Low frequency 20Hz 12dB/oct Takagi 9kHz 12dB/oct Loudness control characteristics Low frequency 100Hz +8.5dB High frequency 10kHz +4dB Muteng -10dB, -20dB (for the level at 0dB) ?Comprehensive characteristics Channel separation PHONO?SPEAKER OUT 40 dB or more (20 kHz) Total harmonic strain rate Within 0.1% (20Hz to 20kHz at rated output) Transmission characteristics PHONO?SPEAKER OUT 20Hz to 20kHz (at ±0.4dB1W) ?Power outlet SWITCHED 2 pieces 250W UNSWITCHED 1 piece 150W ?Power supply AC100V 50/60Hz ?Power consumption 140W (according to the Electric Appliance and Material Control Act) ?Dimension 396W x 147H x 281D (m/m) ?Weight 11.2kg

This is a great Japanese integrated amplifier that I bought and imported from Japan. It is fully tested and all functions work as intended. All pots and switches have been cleaned and lubed with Deoxit 5. Please note that power cord has been replaced with something a little more heavy duty. I am offering the amp today with a small stepdown transformer from 120v to 100v for Japanese domestic items, I have had great success with these. Below is specs available from the Denon History site. Main standards ?Power amplifier part Circuit method Differential amplification all stages direct connection pure comprehensive OCL circuit end stage silicon triple diffusion mesa transistor adopted Dynamic output 260W (130W+130W) (load 4? IHF standard) 164W (82W+82W) (load 8? IHF standard) Continuous output of sine wave Driven by both channels Rated output 1kHz 65W+65W (load 4? T.H.D. 0.05%) 1kHz 60W+60W (load 8? T.H.D. 0.05%) 20Hz to 20kHz 58W+58W (load 4? T.H.D. 0.1%) 20Hz to 20kHz 55W+55W (load 8? T.H.D. 0.1%) Total harmonic strain rate 0.1% or less (20Hz to 20kHz at sine wave rated output) Mixed modulation strain rate 60Hz/7kHz 0.1% or less (at sine wave rated output equivalent amplitude output) 4:1 0.05% or less (at the amplitude output equivalent to 1W of sine wave) Output bandwidth -1dB 10Hz to 35kHz (both channels drive load 8? T.H.D. 0.1%) -3dB 4Hz to 45kHz (both channels drive load 8? T.H.D. 0.1%) Frequency characteristics 10Hz to 50kHz (0.4dB at 0.1W to 0.5W output) Input sensitivity 1Vrms Input impedance 80k? (+10/-30%) (20Hz to 20kHz) Output impedance 0.16? or less Residual noise 0.5mV Output terminal Speaker A&B (load 4-16?) Headphones Stereo headphones compatible ?Preamp part Preamp output PRE AMP OUTPUT Maximum output/load impedance 14VPeak/50k? or more Rated output 1Vrms Total harmonic strain rate 0.05% or less (at 1kHz rated output) Equalizer amplifier output REC OUTPUT Maximum output 24VPeak/50k? or more Rated output 200mVrms Total harmonic strain rate 0.05% or less (10kHz/10Vrms) Input sensitivity/input impedance PHONO-1 2.3mVrms (60k? ±10%) PHONO-2 2.3mVrms (100k? ±10%) TUNER 200mVrms (100k? +10/-20%) AUX-1&2, TAPE-1&2 200mVrms (100k? +10/-20%) REC/PB (input) 500mVrms Maximum allowable input PHONO-1 200mVrms (1kHz) PHONO-2 200mVrms (1kHz) RIAA deviation PHONO-1&2 ±0.3dB (20Hz to 20kHz) S/N IHF-A Network PHONO-1 75dB or more (input terminal short circuit) PHONO-2 75dB or more (input terminal short circuit) TUNER 85dB or more (short circuit of input terminal) AUX-1&2 85dB or more (input terminal short circuit) TAPE-1&2 85dB or more (input terminal short circuit) Tone control part frequency characteristics 10Hz to 50kHz at TONE DEFEAT -0.4dB Tone control bending point/variable range BASS 640Hz/100Hz ±10dB TREBLE 1.6kHz/10kHz ±10dB Filter characteristics Low frequency 20Hz 12dB/oct Takagi 9kHz 12dB/oct Loudness control characteristics Low frequency 100Hz +8.5dB High frequency 10kHz +4dB Muteng -10dB, -20dB (for the level at 0dB) ?Comprehensive characteristics Channel separation PHONO?SPEAKER OUT 40 dB or more (20 kHz) Total harmonic strain rate Within 0.1% (20Hz to 20kHz at rated output) Transmission characteristics PHONO?SPEAKER OUT 20Hz to 20kHz (at ±0.4dB1W) ?Power outlet SWITCHED 2 pieces 250W UNSWITCHED 1 piece 150W ?Power supply AC100V 50/60Hz ?Power consumption 140W (according to the Electric Appliance and Material Control Act) ?Dimension 396W x 147H x 281D (m/m) ?Weight 11.2kg