LD Systems DSP 44 K RACK 4-Kanal Dante™ DSP-Endstufe und Patchbay im 19 Rack-Case Fertig bestücktes 3 HE 19” Rack-Case mit Endstufe und Patchbay DSP 44K 4-Kanal Dante™-Endstufe mit 24-Bit DSP 4 x 1,200 Watt an 4 und 2 Ohm, 2 x 2,400 Watt gebrückt an 4 Ohm Integrierte Preset-Bibliothek für LD Systems Stinger®-Lautsprecher Patchbay mit 4 x speakON, 4 x XLR/f, 2 x XLR/m, 2 x RJ45 Neutrik-Buchsen 7 mm Multiplex-Case mit hochklassiger Hardware und Deckeln vorne und hinten Diese Endstufe wird wegen System-Umstellung nicht mehr benötigt. Über den Verkaufspreis wird eine Rechnung ausgestellt. Viel Freude damit.

BSS BLU-DA: DANTE - BLU-LINK, AES67 and Dante Audio, BLU link – 256 Channel. The Soundweb London BLU-DA offers Dante / AES67 audio and BLU link. This means that the BLU-DA can be used to ‘add’ Dante / AES67 to one or more BLU link devices. The BLU-DA is configurable through HiQnet™ Audio Architect. A rich palette of logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment. The BLU-DA features Dante and AES67 audio. The BLU-DA is capable of simultaneously transmitting and receiving up to 64 channels of Dante or AES67 audio (64 x 64). Primary and Secondary ports are provided for fault tolerance. Control is through a separate Ethernet port. The BLU-DA also includes support for Dante 4.0 firmware for integration with Dante Domain Manager. The BLU-DA also features BLU link, a low latency, fault tolerant digital audio bus of 256 channels, which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km. A bi-directional locate function allows devices to be identified both from and within HiQnet Audio Architect. The BLU-DA and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution. This signal processor is EN 54-16 Compliant for life safety applications AES67 and Dante Audio with support for Dante Domain ManagerBLU link – 256 Channel, Low Latency, Fault Tolerant Digital Audio Bus‘Add’ Dante / AES67 to one or more BLU link devicesClear Front Panel LED IndicationBi-Directional Locate FunctionalityHiQnet DeviceConfiguration, Control and Monitoring from HiQnet Audio Architect1RU, Half-Rack DeviceAES67 CompatibleEN 54-16 Compliant for life safety applications Inkl. 19 Rackmount

RDL DD-BTN44 White Wall Mounted Line Level Bluetooth Audio Extender Dante Interface still sealed in plastic. Will ship double boxed. May require vendor specific software or programming. US Shipping only, International bidders must use eBay shipping hub. Please ask any questions.

2-Kanal-Dante-Adapter (2x XLR Input) von Audinate. Der Adapter funktioniert und wurde lediglich 2x genutzt. Verkauf ohne OVP.

LD Systems DSP 44 K RACK 4-Kanal Dante™ DSP-Endstufe und Patchbay im 19 Rack-Case Fertig bestücktes 3 HE 19” Rack-Case mit Endstufe und Patchbay DSP 44K 4-Kanal Dante™-Endstufe mit 24-Bit DSP 4 x 1,200 Watt an 4 und 2 Ohm, 2 x 2,400 Watt gebrückt an 4 Ohm Integrierte Preset-Bibliothek für LD Systems Stinger®-Lautsprecher Patchbay mit 4 x speakON, 4 x XLR/f, 2 x XLR/m, 2 x RJ45 Neutrik-Buchsen 7 mm Multiplex-Case mit hochklassiger Hardware und Deckeln vorne und hinten Diese Endstufe wird wegen System-Umstellung nicht mehr benötigt. Über den Verkaufspreis wird eine Rechnung ausgestellt. Viel Freude damit.

Audinate ADP-DAO-0X1 Dante Avio Output AdapterFeaturesFür den Anschluss von analogen Audio-Line-Level-Geräten (z. B. Aktiv-Lautsprecher) an ein Dante®-Audio-NetzwerkEinstellbarer Signalpegel +18/+4/0 dBu, 0/-10 dBV (über Dante®-Controller)Das Markenzeichen Dante® sowie die ggf. in diese Produkte integrierte Dante®-Software wurden lizensiert von der Audinate Pty Ltd.Technische DatenFrequenzbereich: 20-20000 HzImpedanz: 150 k? (sym.), 75 k? (asym.)Dynamikumfang: > 100 dBSignal/Rauschabstand: > 100 dBKlirrfaktor: < 0,0 1%Sample-Rate: 44,1/48/96 kHz, 24 BitAnschlüsse: 1 x RJ45, 1 x XLR-SteckerTyp: 1-KanalFarbe: schwarzGewicht: 0,120kg Modelname: AVIO-DAO1Produktversion: 1.3.1.0Dante Version: 4.2.1.2Zustand: sehr gutRechnung vom 29.11.2023 kann dem Paket auf Wunsch beigelegt werden. Ich schließe jegliche Sachmängelhaftung aus. Der Kaufgegenstand wird unter Ausschluss jeglicher Gewährleistung verkauft. Der Ausschluss gilt nicht für Schadensersatzansprüche aus grob fahrlässiger bzw. vorsätzlicher Verletzung meiner Pflichten als Verkäufer sowie für jede Verletzung von Leben, Körper und Gesundheit.Viel Spaß beim Kauf.

This Audinate Dante AVIO 2 Channel USB-C Adapter is a great addition to any home audio setup. With its sleek design and easy plug-and-play functionality, it allows you to effortlessly connect your USB-C devices to your audio system. The adapter is compatible with a wide range of devices and is perfect for use with computers, laptops, and other electronic devices that have a USB-C port. The adapter features two high-quality channels that provide crystal-clear audio output. It is designed to work with Audinate's Dante audio network, making it an ideal choice for anyone who wants to enhance their home audio experience. Whether you're a music enthusiast or a casual listener, this adapter is sure to impress.

2-Kanal-Dante-Adapter (2x XLR Input) von Audinate. Der Adapter funktioniert und wurde lediglich 2x genutzt. Verkauf ohne OVP.

LD Systems DSP 44 K RACK 4-Kanal Dante™ DSP-Endstufe und Patchbay im 19 Rack-Case Fertig bestücktes 3 HE 19” Rack-Case mit Endstufe und Patchbay DSP 44K 4-Kanal Dante™-Endstufe mit 24-Bit DSP 4 x 1,200 Watt an 4 und 2 Ohm, 2 x 2,400 Watt gebrückt an 4 Ohm Integrierte Preset-Bibliothek für LD Systems Stinger®-Lautsprecher Patchbay mit 4 x speakON, 4 x XLR/f, 2 x XLR/m, 2 x RJ45 Neutrik-Buchsen 7 mm Multiplex-Case mit hochklassiger Hardware und Deckeln vorne und hinten Diese Endstufe wird wegen System-Umstellung nicht mehr benötigt. Über den Verkaufspreis wird eine Rechnung ausgestellt. Viel Freude damit.

Audinate ADP-DAO-0X1 Dante Avio Output AdapterFeaturesFür den Anschluss von analogen Audio-Line-Level-Geräten (z. B. Aktiv-Lautsprecher) an ein Dante®-Audio-NetzwerkEinstellbarer Signalpegel +18/+4/0 dBu, 0/-10 dBV (über Dante®-Controller)Das Markenzeichen Dante® sowie die ggf. in diese Produkte integrierte Dante®-Software wurden lizensiert von der Audinate Pty Ltd.Technische DatenFrequenzbereich: 20-20000 HzImpedanz: 150 k? (sym.), 75 k? (asym.)Dynamikumfang: > 100 dBSignal/Rauschabstand: > 100 dBKlirrfaktor: < 0,0 1%Sample-Rate: 44,1/48/96 kHz, 24 BitAnschlüsse: 1 x RJ45, 1 x XLR-SteckerTyp: 1-KanalFarbe: schwarzGewicht: 0,120kg Modelname: AVIO-DAO1Produktversion: 1.3.1.0Dante Version: 4.2.1.2Zustand: sehr gutRechnung vom 29.11.2023 kann dem Paket auf Wunsch beigelegt werden. Ich schließe jegliche Sachmängelhaftung aus. Der Kaufgegenstand wird unter Ausschluss jeglicher Gewährleistung verkauft. Der Ausschluss gilt nicht für Schadensersatzansprüche aus grob fahrlässiger bzw. vorsätzlicher Verletzung meiner Pflichten als Verkäufer sowie für jede Verletzung von Leben, Körper und Gesundheit.Viel Spaß beim Kauf.

RDL DD-BTN44 White Wall Mounted Line Level Bluetooth Audio Extender Dante Interface still sealed in plastic. Will ship double boxed. May require vendor specific software or programming. US Shipping only, International bidders must use eBay shipping hub. Please ask any questions.

BSS BLU-DA: DANTE - BLU-LINK, AES67 and Dante Audio, BLU link – 256 Channel. The Soundweb London BLU-DA offers Dante / AES67 audio and BLU link. This means that the BLU-DA can be used to ‘add’ Dante / AES67 to one or more BLU link devices. The BLU-DA is configurable through HiQnet™ Audio Architect. A rich palette of logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment. The BLU-DA features Dante and AES67 audio. The BLU-DA is capable of simultaneously transmitting and receiving up to 64 channels of Dante or AES67 audio (64 x 64). Primary and Secondary ports are provided for fault tolerance. Control is through a separate Ethernet port. The BLU-DA also includes support for Dante 4.0 firmware for integration with Dante Domain Manager. The BLU-DA also features BLU link, a low latency, fault tolerant digital audio bus of 256 channels, which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km. A bi-directional locate function allows devices to be identified both from and within HiQnet Audio Architect. The BLU-DA and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution. This signal processor is EN 54-16 Compliant for life safety applications AES67 and Dante Audio with support for Dante Domain ManagerBLU link – 256 Channel, Low Latency, Fault Tolerant Digital Audio Bus‘Add’ Dante / AES67 to one or more BLU link devicesClear Front Panel LED IndicationBi-Directional Locate FunctionalityHiQnet DeviceConfiguration, Control and Monitoring from HiQnet Audio Architect1RU, Half-Rack DeviceAES67 CompatibleEN 54-16 Compliant for life safety applications Inkl. 19 Rackmount

LD Systems DSP 44 K RACK 4-Kanal Dante™ DSP-Endstufe und Patchbay im 19 Rack-Case Fertig bestücktes 3 HE 19” Rack-Case mit Endstufe und Patchbay DSP 44K 4-Kanal Dante™-Endstufe mit 24-Bit DSP 4 x 1,200 Watt an 4 und 2 Ohm, 2 x 2,400 Watt gebrückt an 4 Ohm Integrierte Preset-Bibliothek für LD Systems Stinger®-Lautsprecher Patchbay mit 4 x speakON, 4 x XLR/f, 2 x XLR/m, 2 x RJ45 Neutrik-Buchsen 7 mm Multiplex-Case mit hochklassiger Hardware und Deckeln vorne und hinten Diese Endstufe wird wegen System-Umstellung nicht mehr benötigt. Über den Verkaufspreis wird eine Rechnung ausgestellt. Viel Freude damit.

Audinate ADP-DAO-0X1 Dante Avio Output AdapterFeaturesFür den Anschluss von analogen Audio-Line-Level-Geräten (z. B. Aktiv-Lautsprecher) an ein Dante®-Audio-NetzwerkEinstellbarer Signalpegel +18/+4/0 dBu, 0/-10 dBV (über Dante®-Controller)Das Markenzeichen Dante® sowie die ggf. in diese Produkte integrierte Dante®-Software wurden lizensiert von der Audinate Pty Ltd.Technische DatenFrequenzbereich: 20-20000 HzImpedanz: 150 k? (sym.), 75 k? (asym.)Dynamikumfang: > 100 dBSignal/Rauschabstand: > 100 dBKlirrfaktor: < 0,0 1%Sample-Rate: 44,1/48/96 kHz, 24 BitAnschlüsse: 1 x RJ45, 1 x XLR-SteckerTyp: 1-KanalFarbe: schwarzGewicht: 0,120kg Modelname: AVIO-DAO1Produktversion: 1.3.1.0Dante Version: 4.2.1.2Zustand: sehr gutRechnung vom 29.11.2023 kann dem Paket auf Wunsch beigelegt werden. Ich schließe jegliche Sachmängelhaftung aus. Der Kaufgegenstand wird unter Ausschluss jeglicher Gewährleistung verkauft. Der Ausschluss gilt nicht für Schadensersatzansprüche aus grob fahrlässiger bzw. vorsätzlicher Verletzung meiner Pflichten als Verkäufer sowie für jede Verletzung von Leben, Körper und Gesundheit.Viel Spaß beim Kauf.

Used. Unable to test. Pulled out of an installation due to an upgrade. SoundTube IPD-CM52-BGM IP-Addressable Speaker in WhiteDante®-enabled coaxial in-ceiling speaker incorporating one 5.25 inch (134 mm) polypropylene woofer with rubber surround and one 0.75 inch (19 mm) silk dome tweeter. BroadBeam Ring™ technology and a tuned port on the baffle provide smooth off-axis performance, mid-range clarity and bass response to 65 Hz (-10 dB). Low latency digital audio, power, and control are delivered to the speaker via standard category cable; connection is made on the other end to the STNet-Switch or other PoE / PoE+ switch. May also be powered via a 24V DC barrel connector for non-PoE installations. Configuration and zoning of the speaker are accomplished via software. Mounting hardware is included and features SoundTube®s SpeedWing™ constant-tension fixed-wing mounting system, which accommodates material thicknesses ranging from 0.035 in (0.9 mm) to 2.38 in (60.4mm). Color-coded tile bridge, UL listed conduit clamp and paint shield are included.

Audinate ADP-DAO-0X1 Dante Avio Output AdapterFeaturesFür den Anschluss von analogen Audio-Line-Level-Geräten (z. B. Aktiv-Lautsprecher) an ein Dante®-Audio-NetzwerkEinstellbarer Signalpegel +18/+4/0 dBu, 0/-10 dBV (über Dante®-Controller)Das Markenzeichen Dante® sowie die ggf. in diese Produkte integrierte Dante®-Software wurden lizensiert von der Audinate Pty Ltd.Technische DatenFrequenzbereich: 20-20000 HzImpedanz: 150 k? (sym.), 75 k? (asym.)Dynamikumfang: > 100 dBSignal/Rauschabstand: > 100 dBKlirrfaktor: < 0,0 1%Sample-Rate: 44,1/48/96 kHz, 24 BitAnschlüsse: 1 x RJ45, 1 x XLR-SteckerTyp: 1-KanalFarbe: schwarzGewicht: 0,120kg Modelname: AVIO-DAO1Produktversion: 1.3.1.0Dante Version: 4.2.1.2Zustand: sehr gutRechnung vom 29.11.2023 kann dem Paket auf Wunsch beigelegt werden. Ich schließe jegliche Sachmängelhaftung aus. Der Kaufgegenstand wird unter Ausschluss jeglicher Gewährleistung verkauft. Der Ausschluss gilt nicht für Schadensersatzansprüche aus grob fahrlässiger bzw. vorsätzlicher Verletzung meiner Pflichten als Verkäufer sowie für jede Verletzung von Leben, Körper und Gesundheit.Viel Spaß beim Kauf.

RDL DDB-RN31 **OPEN BOX UNUSED ITEM ** Black color -Dante Network Interface -4 Audio Inputs and 4 Audio Outputs -Inputs: 2 x XLR, 2 x RCA, 3.5mm TRS -Output: 3.5mm TRS -48 and 44.1 kHz, 24-Bit AD/DA Conversion -Mic-/Line-Level Inputs -48V Phantom Power The DD-RN31 is configured and adjusted using RDL CONSOLE or other network control software. The unit fits a standard US dual-gang electrical box or an RDL WB-2 back box. The DD-RN31 is PoE-powered. GOOD LUCK BIDDING!

RDL DDB-RN31 **OPEN BOX UNUSED ITEM ** Black color -Dante Network Interface -4 Audio Inputs and 4 Audio Outputs -Inputs: 2 x XLR, 2 x RCA, 3.5mm TRS -Output: 3.5mm TRS -48 and 44.1 kHz, 24-Bit AD/DA Conversion -Mic-/Line-Level Inputs -48V Phantom Power The DD-RN31 is configured and adjusted using RDL CONSOLE or other network control software. The unit fits a standard US dual-gang electrical box or an RDL WB-2 back box. The DD-RN31 is PoE-powered. GOOD LUCK BIDDING!

RDL DDB-RN31 **OPEN BOX UNUSED ITEM ** Black color -Dante Network Interface -4 Audio Inputs and 4 Audio Outputs -Inputs: 2 x XLR, 2 x RCA, 3.5mm TRS -Output: 3.5mm TRS -48 and 44.1 kHz, 24-Bit AD/DA Conversion -Mic-/Line-Level Inputs -48V Phantom Power The DD-RN31 is configured and adjusted using RDL CONSOLE or other network control software. The unit fits a standard US dual-gang electrical box or an RDL WB-2 back box. The DD-RN31 is PoE-powered. GOOD LUCK BIDDING!

RDL SF-DN4 Sysflex Digital Audio To Network Interface with Dante,POE, Powers up. This is another fine Gizmo from SurplusGizmos located in Hillsboro Oregon. Click here to check out our other Gizmos that are available... Item Description and Features:Manufacturer: RDL Part Number: Sysflex SF-DN4 This item converts audio inputs to Dante NetworkUnits were pulled from service.We tested them for power up using a POE injector.We then connected to a network hub.The RJ45 LED lights light up, Sync LED lights upDo not have ability to test beyond basic power onDoes not come with POE or any other accessories. Testing Done:We tested them for power up using a POE injector.We then connected to a network hub.The RJ45 LED lights light up, Sync LED lights upNo other testing doneYou will Receive:Please look over the photos carefully and do not assume anything about the item(s) included in this listing. This item is sold as you see in the pictures, unless otherwise stated. If it is not pictured, it is not included. (1 Quantity) RDL SF-DN4 Sysflex Network Interface Item Condition: We are not experts and do not claim to be with any of the items we sell. We do the best research we can in order to properly represent the item(s) as clearly and honestly as possible. We strongly encourage buyers to do their own research beforehand. If you have any questions, please ask before you make your purchase and we will do our best to answer your questions to the best of our abilities. Used - Used units pulled from service. We tested them for power up using a POE (not included) Verified that network and Sync LEDs turned on Item is sold as is No guarantee Item Weight: Shipping Weight is approximately 1.15 lbs and 0.00 oz . You can also reach us by visiting our retail store directly or via phone during normal business hours.SurplusGizmos is located:Hillsboro Oregon, 97124Retail hours are Wed - Fri 10am - 6pm, Sat 10am - 5pmFeel free to stop by to examine items during regular hours. Shipping methods are as follows:Items are generally shipped in 2 to 3 business days (Wed to Fri) after payment has cleared except for large objects that may take more time for packaging.International orders may take longer to ship due to delays with Post Office.Buyer is to pay actual shipping costs based on shipping address.There is a packaging fee added to all orders ranging from $2 to $10 depending on size of box, material etc. It will be automatically added to the shipping charge.USA customers can choose UPS, USPS Priority Mail, or USPS express mail. We can ship on your account via UPS but we must charge for packaging (usually $2 to $10)Non USA customers can choose USPS priority international or USPS express international. We can ship on your account via UPS or Fedex (may be extra fees for fedex) but account must be verified. Packaging fee is as stated above.Items can also be picked up during normal business hours. Please call ahead so we can have it ready.We wont under-value merchandise or mark the item as a gift on customs forms. Doing that is against U.S. and international laws. Payment Policy: Payment is to be made directly through ebay, Paypal, or wire transfer.Payment is due within 8 days of auction close or a dispute will be filed. Warranty Policy: Due to the unknown condition, age, and weirdness of items that are sold thru our store, most items come without a warranty.This means that all used or surplus items are sold AS-IS except for where it is stated explicitly otherwise in the items description.All new items are warranted by manufacturer.There are no returns for products sold AS-IS.What AS IS means is what you see is what you get and that we do NOT guarantee the item.Check description for exact listing. Email us with any questions prior to buying as there are no returns.If item is warranted then the warranty is for defects in the product not compatibility. In all returns the shipping to our Store is the responsibility of the purchaser.All returned items will be tested. If no problem is found return shipping will be charged.Products under warranty will be replaced with same or similar item depending on availability or a store credit will be given.The Store is not responsible for the way you use or misuse any item you purchase.If you are not knowledgeable in the use of the item seek assistance first.If you have questions on an item that you wish to purchase or bid on, please ask questions first via e-mail.It is your responsibility to understand and know what you are buying/bidding on.Remember that bidding on an item is entering into a contract to purchase this item. If you do not follow through with your obligation of payment an unpaid item dispute will result.