M&K BMC-1 Miller & Kreisel Sound Bass Management Controller in Near Mint condition. A hi-res Surround Bass Management system for audiophiles and film editors. The M&K Sound BMC-1 is a balanced, line-level studio bass management controller intended for use with M&K Sounds line of professional studio monitors and with high-end home theater installations. Although the BMC-1 was primarily designed for monitoring 5.1 audio, its flexible architecture allows it to be used for monitoring mono, stereo, Dolby Surround, Dolby Digital, DTS and other formats. The BMC-1 combines several necessary functions in one 19” rack mount 1RU package. Along with bass management and LFE channel control, it also provides individual channel adjustment capability to properly calibrate your entire monitor system. The controller consists of a series of five high-pass filters (one each for the L, C, R, LS, RS channels) that route high frequency information (above 80Hz) to their appropriate channels amplifier and speaker. Each channel is also routed through a matching 80Hz lowpass filter. This low frequency information is then routed to a summing amplifier, which in turn sends this low frequency information, along with the LFE channel, to two subwoofer outputs. This is done for two reasons. First, small loudspeakers may not be able to properly reproduce information below 80Hz. This information is therefore summed together and redirected from the individual channels to a loudspeaker that can reproduce this low frequency information with clarity and power “ a subwoofer. With the introduction of digital audio, it has become necessary for loudspeaker systems to be able to accurately reproduce audio that has a bandwidth of 20Hz to 20kHz with wide dynamics. A satellite/subwoofer system is the best way to accomplish this. Secondly, todays home theater receivers utilize bass management per Dolby requirements. In order for work done in the studio to translate properly, the mixer must hear his mix exactly the way it will ultimately be played back. The BMC-1 together with a properly set-up and calibrated M&K Sound monitor system allows the mixer to hear his work with more accuracy than might otherwise be possible. Front Panel Trim Controls +/- 12dB trim control for balancing the system. No PSU.

Lenco BMC-090BK Bluetooth v4.2Echo, die Lautstärke des Mikrofons und der Musik separat einstellbarLichteffekte im Rhythmus der MusikAusgangsleistung: 5 Watt (RMS)Integrierter Akku bis zu 8 Stunden Das Lenco BMC-090 ist ein Karaoke-Mikrofon, das über eine Bluetooth-Verbindung oder USB/SD-Karten-Eingang mit Musik versorgt wird. Singen Sie zu Ihren Lieblingsliedern und sorgen Sie mit den integrierten LED-Lichtern für einen noch beeindruckenderen Auftritt. Es ist sehr kompakt, so dass es ganz einfach überall mithin genommen werden kann. Es wird mit USB-Kabel ausgeliefert und ist mit USB-Eingang, Line-Ausgang und Micro-SD-Kartensteckplatz ausgestattet. Zudem hat es einen integrierten Akku für bis zu 8 Stunden Laufzeit, damit Ihre Freunde, Familie und Sie sich stundenlang musikalisch ausleben können. Falls Sie den Liedtext beim Singen benötigen können Sie Ihr Smartphone an der dafür angebrachten Halterung befestigen. Für eine gute Kontrolle ist die Lautstärke des Mikrofons und der Musik einstellbar, ebenso wie das Echo. Mit dem 5 Watt RMS starken Lautsprecher haben Sie zudem noch einen leistungsfähigen Bluetooth-Lautsprecher. Ein weiteres durchdachtes Feature: Über den Line-Ausgang können Sie das Lenco BMC-090 an eine Hifi-Anlage anschließen und als Bluetooth-Transmitter nutzen. Das Lenco BMC-090 ist in rosa und schwarz erhältlich. LieferumfangKabelloses Mikrofon Audiokabel 3,5 mmUSB-KabelBedienungsanleitung NL / EN / DE / FR / ESUniverselle BedienungsanleitungNagelneu und OVP

Mikrophon mit einer Beschdigung am Gehuse. Siehe Foto . Bluetooth, Micro-SD und USB Anschluss . Aufladung ber Micro-USB Verbindung. Bluetooth funktioniert. Keine Beschreibung mehr vorhanden.

Gebraucht, in OVP, keine Kabel. Privatverkauf, keine Garantie, keine Rücknahme. Tierfreier, Nichtraucherhaushalt.

M&K BMC-1 Miller & Kreisel Sound Bass Management Controller in Near Mint condition. A hi-res Surround Bass Management system for audiophiles and film editors. The M&K Sound BMC-1 is a balanced, line-level studio bass management controller intended for use with M&K Sounds line of professional studio monitors and with high-end home theater installations. Although the BMC-1 was primarily designed for monitoring 5.1 audio, its flexible architecture allows it to be used for monitoring mono, stereo, Dolby Surround, Dolby Digital, DTS and other formats. The BMC-1 combines several necessary functions in one 19” rack mount 1RU package. Along with bass management and LFE channel control, it also provides individual channel adjustment capability to properly calibrate your entire monitor system. The controller consists of a series of five high-pass filters (one each for the L, C, R, LS, RS channels) that route high frequency information (above 80Hz) to their appropriate channels amplifier and speaker. Each channel is also routed through a matching 80Hz lowpass filter. This low frequency information is then routed to a summing amplifier, which in turn sends this low frequency information, along with the LFE channel, to two subwoofer outputs. This is done for two reasons. First, small loudspeakers may not be able to properly reproduce information below 80Hz. This information is therefore summed together and redirected from the individual channels to a loudspeaker that can reproduce this low frequency information with clarity and power “ a subwoofer. With the introduction of digital audio, it has become necessary for loudspeaker systems to be able to accurately reproduce audio that has a bandwidth of 20Hz to 20kHz with wide dynamics. A satellite/subwoofer system is the best way to accomplish this. Secondly, todays home theater receivers utilize bass management per Dolby requirements. In order for work done in the studio to translate properly, the mixer must hear his mix exactly the way it will ultimately be played back. The BMC-1 together with a properly set-up and calibrated M&K Sound monitor system allows the mixer to hear his work with more accuracy than might otherwise be possible. Front Panel Trim Controls +/- 12dB trim control for balancing the system. No PSU.

M&K BMC-1 Miller & Kreisel Sound Bass Management Controller in Near Mint condition. A hi-res Surround Bass Management system for audiophiles and film editors. The M&K Sound BMC-1 is a balanced, line-level studio bass management controller intended for use with M&K Sounds line of professional studio monitors and with high-end home theater installations. Although the BMC-1 was primarily designed for monitoring 5.1 audio, its flexible architecture allows it to be used for monitoring mono, stereo, Dolby Surround, Dolby Digital, DTS and other formats. The BMC-1 combines several necessary functions in one 19” rack mount 1RU package. Along with bass management and LFE channel control, it also provides individual channel adjustment capability to properly calibrate your entire monitor system. The controller consists of a series of five high-pass filters (one each for the L, C, R, LS, RS channels) that route high frequency information (above 80Hz) to their appropriate channels amplifier and speaker. Each channel is also routed through a matching 80Hz lowpass filter. This low frequency information is then routed to a summing amplifier, which in turn sends this low frequency information, along with the LFE channel, to two subwoofer outputs. This is done for two reasons. First, small loudspeakers may not be able to properly reproduce information below 80Hz. This information is therefore summed together and redirected from the individual channels to a loudspeaker that can reproduce this low frequency information with clarity and power “ a subwoofer. With the introduction of digital audio, it has become necessary for loudspeaker systems to be able to accurately reproduce audio that has a bandwidth of 20Hz to 20kHz with wide dynamics. A satellite/subwoofer system is the best way to accomplish this. Secondly, todays home theater receivers utilize bass management per Dolby requirements. In order for work done in the studio to translate properly, the mixer must hear his mix exactly the way it will ultimately be played back. The BMC-1 together with a properly set-up and calibrated M&K Sound monitor system allows the mixer to hear his work with more accuracy than might otherwise be possible. Front Panel Trim Controls +/- 12dB trim control for balancing the system. No PSU.

Mikrophon mit einer Beschdigung am Gehuse. Siehe Foto . Bluetooth, Micro-SD und USB Anschluss . Aufladung ber Micro-USB Verbindung. Bluetooth funktioniert. Keine Beschreibung mehr vorhanden.

Normal 0 21 Hallo, Normal 0 21 Normal 0 21 Normal 0 21 ich biete hier: Lenco Bluetooth Mikrofon BMC 80 mit Stereo Lautsprechern in Farbe Silber. Das Mikrofon ist ausgepackt worden und nur 1-2 mal die Lautsprecher-Funktion verwendet worden. Das Gerät ist daher quasi neuwertig. OVP und Beschreibung vorhanden. Dies ist ein Privatverkauf, d.h. ohne Garantie / Gewährleistung und Rücknahme! Das Verlustrisiko bei unversichertem Versand trägt der Käufer. Bei Bedarf biete ich auf Nachfrage auch versicherten Versand an.Kombiversand möglich. Viel Spaß beim Bieten! Normal 0 21 Foreign bidders are welcome. Please ask for postage.

gerne sammeln,folgt eine gesamtrechnung.das mikro wurde 2 mal benutzt.also wie neu.

M&K BMC-1 Miller & Kreisel Sound Bass Management Controller in Near Mint condition. A hi-res Surround Bass Management system for audiophiles and film editors. The M&K Sound BMC-1 is a balanced, line-level studio bass management controller intended for use with M&K Sounds line of professional studio monitors and with high-end home theater installations. Although the BMC-1 was primarily designed for monitoring 5.1 audio, its flexible architecture allows it to be used for monitoring mono, stereo, Dolby Surround, Dolby Digital, DTS and other formats. The BMC-1 combines several necessary functions in one 19” rack mount 1RU package. Along with bass management and LFE channel control, it also provides individual channel adjustment capability to properly calibrate your entire monitor system. The controller consists of a series of five high-pass filters (one each for the L, C, R, LS, RS channels) that route high frequency information (above 80Hz) to their appropriate channels amplifier and speaker. Each channel is also routed through a matching 80Hz lowpass filter. This low frequency information is then routed to a summing amplifier, which in turn sends this low frequency information, along with the LFE channel, to two subwoofer outputs. This is done for two reasons. First, small loudspeakers may not be able to properly reproduce information below 80Hz. This information is therefore summed together and redirected from the individual channels to a loudspeaker that can reproduce this low frequency information with clarity and power “ a subwoofer. With the introduction of digital audio, it has become necessary for loudspeaker systems to be able to accurately reproduce audio that has a bandwidth of 20Hz to 20kHz with wide dynamics. A satellite/subwoofer system is the best way to accomplish this. Secondly, todays home theater receivers utilize bass management per Dolby requirements. In order for work done in the studio to translate properly, the mixer must hear his mix exactly the way it will ultimately be played back. The BMC-1 together with a properly set-up and calibrated M&K Sound monitor system allows the mixer to hear his work with more accuracy than might otherwise be possible. Front Panel Trim Controls +/- 12dB trim control for balancing the system. No PSU.

Lenco BMC-180BK - Karaoke Mikrofon Bluetooth mit Lautsprecher und LichteffektenKann über AUX mit jedem HIFI-SET als Bluetooth Adapter und Mikrofon genutzt werden.tadelloser Zustand gebraucht Gebrauchsspuren

Mikrophon mit einer Beschdigung am Gehuse. Siehe Foto . Bluetooth, Micro-SD und USB Anschluss . Aufladung ber Micro-USB Verbindung. Bluetooth funktioniert. Keine Beschreibung mehr vorhanden.

Normal 0 21 Hallo, Normal 0 21 Normal 0 21 Normal 0 21 ich biete hier: Lenco Bluetooth Mikrofon BMC 80 mit Stereo Lautsprechern in Farbe Silber. Das Mikrofon ist ausgepackt worden und nur 1-2 mal die Lautsprecher-Funktion verwendet worden. Das Gerät ist daher quasi neuwertig. OVP und Beschreibung vorhanden. Dies ist ein Privatverkauf, d.h. ohne Garantie / Gewährleistung und Rücknahme! Das Verlustrisiko bei unversichertem Versand trägt der Käufer. Bei Bedarf biete ich auf Nachfrage auch versicherten Versand an.Kombiversand möglich. Viel Spaß beim Bieten! Normal 0 21 Foreign bidders are welcome. Please ask for postage.

Mikrophon mit einer Beschdigung am Gehuse. Siehe Foto . Bluetooth, Micro-SD und USB Anschluss . Aufladung ber Micro-USB Verbindung. Bluetooth funktioniert. Keine Beschreibung mehr vorhanden.

Gebraucht ohne OVP und Ladekabel . Gewicht : 0,390 Kg. Geprüft und Funktionsfähig. Der optische Artikel Zustand wird von uns dem Alter entsprechend als neuwertig eingestuft . Herzlich Willkommen beim Fleamarketshopgermany :) Falls für diesen Artikel eine Preisvorschlag Option verfügbar ist , können Sie uns gerne einen Preisvorschlag unterbreiten :) Die Zahlen und Buchstaben am Ende der Artikel Beschreibung, haben für Sie keine Bedeutung, diese sind interne Lagernummern. :) Den optischen Zustand bewerten Sie bitte selber, an unseren detaillierten Bildern.Die Gewichtsangaben werden auf und abgerundet . EU Shipping is no Problem . International Shipping from 100 Euro + . Combined shipping is possible.Alle unsere Artikel werden sicher verpackt und mit Sendungsverfolgung per DHL verschickt . Bitte lesen Sie sich die Beschreibung genau durch, um Missverständnisse zu vermeiden :) Bitte schauen Sie sich die Artikelbilder genau an, da diese Teil der Produktbeschreibung sind.Alle Elektro Artikel werden ohne Batterien geliefert (Artikel mit Akkus , werden natürlich mit dem jeweiligen Akku geliefert).Jeder Elektro Artikel erhält ein Qualitätssiegel.Die Rückstände des Qualitätssiegel lassen sich problemlos abwischen ! Die Elektro Artikel erhalten aus folgendem Grund ein Qualitätssiegel und eine versteckte Kennzeichnung : Zum vorbeugen, von Ersatzteil Tausch oder Entnahme.Geliefert wird was auf den Bildern zu sehen ist.Mit bestem Gewissen versuchen wir, so gut es geht den Artikel zu Fotografieren und zu beschreiben.Sollten Sie aus irgendeinen Grund mal nicht ganz zufrieden sein, so sprechen Sie uns bitte an. Bitte beachten Sie unsere weiteren Artikel im Shop zum Aktionspreis! Alle genannten Markennamen und geschützten Warenzeichen sind im Eigentum ihrer jeweiligen Inhaber.Die Nennung von Markennamen und geschützter Warenzeichen hat lediglich einen beschreibenden Charakter.Sie dienen zu beschreibenden Zwecken und zur Identifikation von Produkt und Qualität und sollen keine Verletzung von Schutzrechten darstellen. Verpackungsregister Nr : DE 1730966987953 ACHTUNG !!! Nicht für Kinder unter 3 Jahren geeignet, Kleinteile könnten verschluckt werden! Die Mehrwertsteuer kann aufgrund der Differenzbesteuerung nicht gesondert ausgewiesen werden

M&K BMC-1 Miller & Kreisel Sound Bass Management Controller in Near Mint condition. A hi-res Surround Bass Management system for audiophiles and film editors. The M&K Sound BMC-1 is a balanced, line-level studio bass management controller intended for use with M&K Sounds line of professional studio monitors and with high-end home theater installations. Although the BMC-1 was primarily designed for monitoring 5.1 audio, its flexible architecture allows it to be used for monitoring mono, stereo, Dolby Surround, Dolby Digital, DTS and other formats. The BMC-1 combines several necessary functions in one 19” rack mount 1RU package. Along with bass management and LFE channel control, it also provides individual channel adjustment capability to properly calibrate your entire monitor system. The controller consists of a series of five high-pass filters (one each for the L, C, R, LS, RS channels) that route high frequency information (above 80Hz) to their appropriate channels amplifier and speaker. Each channel is also routed through a matching 80Hz lowpass filter. This low frequency information is then routed to a summing amplifier, which in turn sends this low frequency information, along with the LFE channel, to two subwoofer outputs. This is done for two reasons. First, small loudspeakers may not be able to properly reproduce information below 80Hz. This information is therefore summed together and redirected from the individual channels to a loudspeaker that can reproduce this low frequency information with clarity and power “ a subwoofer. With the introduction of digital audio, it has become necessary for loudspeaker systems to be able to accurately reproduce audio that has a bandwidth of 20Hz to 20kHz with wide dynamics. A satellite/subwoofer system is the best way to accomplish this. Secondly, todays home theater receivers utilize bass management per Dolby requirements. In order for work done in the studio to translate properly, the mixer must hear his mix exactly the way it will ultimately be played back. The BMC-1 together with a properly set-up and calibrated M&K Sound monitor system allows the mixer to hear his work with more accuracy than might otherwise be possible. Front Panel Trim Controls +/- 12dB trim control for balancing the system. No PSU.

M&K BMC-1 Miller & Kreisel Sound Bass Management Controller in Near Mint condition. A hi-res Surround Bass Management system for audiophiles and film editors. The M&K Sound BMC-1 is a balanced, line-level studio bass management controller intended for use with M&K Sounds line of professional studio monitors and with high-end home theater installations. Although the BMC-1 was primarily designed for monitoring 5.1 audio, its flexible architecture allows it to be used for monitoring mono, stereo, Dolby Surround, Dolby Digital, DTS and other formats. The BMC-1 combines several necessary functions in one 19” rack mount 1RU package. Along with bass management and LFE channel control, it also provides individual channel adjustment capability to properly calibrate your entire monitor system. The controller consists of a series of five high-pass filters (one each for the L, C, R, LS, RS channels) that route high frequency information (above 80Hz) to their appropriate channels amplifier and speaker. Each channel is also routed through a matching 80Hz lowpass filter. This low frequency information is then routed to a summing amplifier, which in turn sends this low frequency information, along with the LFE channel, to two subwoofer outputs. This is done for two reasons. First, small loudspeakers may not be able to properly reproduce information below 80Hz. This information is therefore summed together and redirected from the individual channels to a loudspeaker that can reproduce this low frequency information with clarity and power “ a subwoofer. With the introduction of digital audio, it has become necessary for loudspeaker systems to be able to accurately reproduce audio that has a bandwidth of 20Hz to 20kHz with wide dynamics. A satellite/subwoofer system is the best way to accomplish this. Secondly, todays home theater receivers utilize bass management per Dolby requirements. In order for work done in the studio to translate properly, the mixer must hear his mix exactly the way it will ultimately be played back. The BMC-1 together with a properly set-up and calibrated M&K Sound monitor system allows the mixer to hear his work with more accuracy than might otherwise be possible. Front Panel Trim Controls +/- 12dB trim control for balancing the system. No PSU.