Amazon |
benz mc3 (9) |
bonsai eins (10) |
benz mc-20 e2 (12) |
benz mc-20 e 2 h (14) |
benz mc-20 (16) |
benz mc- 20 e2 (18) |
Lenco BMC-180 Karaoke-Mikrophon
End: 12.11. 2024 12:22:08 on Tuesday
M&K (Miller & Kreisel): BMC-1 Bass Management Controller/NEAR MINT/Fully Tested!
End: 11.11. 2024 12:28:26 on Monday
- Condition: Used
- Price: 179.81 EUR
- Status: unsold
- Item number: 256702116323
- Bids: 0
- Seller: rstamberg (1889|100.0%)
- Seller information: non commercial
- Item location: Riverside, Connecticut
- Ships to: US
- Shipping: EUR
- on EBAY
-
Description
M&K BMC-1 Miller & Kreisel Sound Bass Management Controller in Near Mint condition. A hi-res Surround Bass Management system for audiophiles and film editors. The M&K Sound BMC-1 is a balanced, line-level studio bass management controller intended for use with M&K Sounds line of professional studio monitors and with high-end home theater installations. Although the BMC-1 was primarily designed for monitoring 5.1 audio, its flexible architecture allows it to be used for monitoring mono, stereo, Dolby Surround, Dolby Digital, DTS and other formats. The BMC-1 combines several necessary functions in one 19” rack mount 1RU package. Along with bass management and LFE channel control, it also provides individual channel adjustment capability to properly calibrate your entire monitor system. The controller consists of a series of five high-pass filters (one each for the L, C, R, LS, RS channels) that route high frequency information (above 80Hz) to their appropriate channels amplifier and speaker. Each channel is also routed through a matching 80Hz lowpass filter. This low frequency information is then routed to a summing amplifier, which in turn sends this low frequency information, along with the LFE channel, to two subwoofer outputs. This is done for two reasons. First, small loudspeakers may not be able to properly reproduce information below 80Hz. This information is therefore summed together and redirected from the individual channels to a loudspeaker that can reproduce this low frequency information with clarity and power “ a subwoofer. With the introduction of digital audio, it has become necessary for loudspeaker systems to be able to accurately reproduce audio that has a bandwidth of 20Hz to 20kHz with wide dynamics. A satellite/subwoofer system is the best way to accomplish this. Secondly, todays home theater receivers utilize bass management per Dolby requirements. In order for work done in the studio to translate properly, the mixer must hear his mix exactly the way it will ultimately be played back. The BMC-1 together with a properly set-up and calibrated M&K Sound monitor system allows the mixer to hear his work with more accuracy than might otherwise be possible. Front Panel Trim Controls +/- 12dB trim control for balancing the system. No PSU.
Lenco Bluetooth Karaoke Mikrofon BMC 80 mit Stereo Lautsprechern
End: 10.11. 2024 15:26:16 on Sunday
M&K (Miller & Kreisel): BMC-1 Bass Management Controller/NEAR MINT/Fully Tested!
End: 04.11. 2024 12:28:13 on Monday
- Condition: Used
- Price: 179.4 EUR
- Status: unsold
- Item number: 256693000631
- Bids: 0
- Seller: rstamberg (1889|100.0%)
- Seller information: non commercial
- Item location: Riverside, Connecticut
- Ships to: US
- Shipping: EUR
- on EBAY
-
Description
M&K BMC-1 Miller & Kreisel Sound Bass Management Controller in Near Mint condition. A hi-res Surround Bass Management system for audiophiles and film editors. The M&K Sound BMC-1 is a balanced, line-level studio bass management controller intended for use with M&K Sounds line of professional studio monitors and with high-end home theater installations. Although the BMC-1 was primarily designed for monitoring 5.1 audio, its flexible architecture allows it to be used for monitoring mono, stereo, Dolby Surround, Dolby Digital, DTS and other formats. The BMC-1 combines several necessary functions in one 19” rack mount 1RU package. Along with bass management and LFE channel control, it also provides individual channel adjustment capability to properly calibrate your entire monitor system. The controller consists of a series of five high-pass filters (one each for the L, C, R, LS, RS channels) that route high frequency information (above 80Hz) to their appropriate channels amplifier and speaker. Each channel is also routed through a matching 80Hz lowpass filter. This low frequency information is then routed to a summing amplifier, which in turn sends this low frequency information, along with the LFE channel, to two subwoofer outputs. This is done for two reasons. First, small loudspeakers may not be able to properly reproduce information below 80Hz. This information is therefore summed together and redirected from the individual channels to a loudspeaker that can reproduce this low frequency information with clarity and power “ a subwoofer. With the introduction of digital audio, it has become necessary for loudspeaker systems to be able to accurately reproduce audio that has a bandwidth of 20Hz to 20kHz with wide dynamics. A satellite/subwoofer system is the best way to accomplish this. Secondly, todays home theater receivers utilize bass management per Dolby requirements. In order for work done in the studio to translate properly, the mixer must hear his mix exactly the way it will ultimately be played back. The BMC-1 together with a properly set-up and calibrated M&K Sound monitor system allows the mixer to hear his work with more accuracy than might otherwise be possible. Front Panel Trim Controls +/- 12dB trim control for balancing the system. No PSU.
Lenco BMC-180BK Karaoke Mikrofon mit Bluetooth - Schwarz NEU
End: 01.11. 2024 22:54:25 on Friday
Lenco BMC-180BK Karaoke Mikrofon mit Bluetooth - Schwarz NEU
End: 25.10. 2024 21:54:02 on Friday
M&K (Miller & Kreisel): BMC-1 Bass Management Controller/NEAR MINT/Fully Tested!
End: 21.10. 2024 11:27:11 on Monday
- Condition: Used
- Price: 174.21 EUR
- Status: unsold
- Item number: 256676174294
- Bids: 0
- Seller: rstamberg (1886|100.0%)
- Seller information: non commercial
- Item location: Riverside, Connecticut
- Ships to: US
- Shipping: EUR
- on EBAY
-
Description
M&K BMC-1 Miller & Kreisel Sound Bass Management Controller in Near Mint condition. A hi-res Surround Bass Management system for audiophiles and film editors. The M&K Sound BMC-1 is a balanced, line-level studio bass management controller intended for use with M&K Sounds line of professional studio monitors and with high-end home theater installations. Although the BMC-1 was primarily designed for monitoring 5.1 audio, its flexible architecture allows it to be used for monitoring mono, stereo, Dolby Surround, Dolby Digital, DTS and other formats. The BMC-1 combines several necessary functions in one 19” rack mount 1RU package. Along with bass management and LFE channel control, it also provides individual channel adjustment capability to properly calibrate your entire monitor system. The controller consists of a series of five high-pass filters (one each for the L, C, R, LS, RS channels) that route high frequency information (above 80Hz) to their appropriate channels amplifier and speaker. Each channel is also routed through a matching 80Hz lowpass filter. This low frequency information is then routed to a summing amplifier, which in turn sends this low frequency information, along with the LFE channel, to two subwoofer outputs. This is done for two reasons. First, small loudspeakers may not be able to properly reproduce information below 80Hz. This information is therefore summed together and redirected from the individual channels to a loudspeaker that can reproduce this low frequency information with clarity and power “ a subwoofer. With the introduction of digital audio, it has become necessary for loudspeaker systems to be able to accurately reproduce audio that has a bandwidth of 20Hz to 20kHz with wide dynamics. A satellite/subwoofer system is the best way to accomplish this. Secondly, todays home theater receivers utilize bass management per Dolby requirements. In order for work done in the studio to translate properly, the mixer must hear his mix exactly the way it will ultimately be played back. The BMC-1 together with a properly set-up and calibrated M&K Sound monitor system allows the mixer to hear his work with more accuracy than might otherwise be possible. Front Panel Trim Controls +/- 12dB trim control for balancing the system. No PSU.
Lenco Bluetooth Karaoke Mikrofon BMC 80 mit Stereo Lautsprechern
End: 20.10. 2024 14:24:52 on Sunday
Lenco BMC-180BK Karaoke Mikrofon mit Bluetooth - Schwarz NEU
End: 18.10. 2024 19:04:33 on Friday
Lenco BMC-090BK - Karaoke Mikrofon - Bluetooth -Lichteffekte - USB/SD - Schwarz
End: 16.10. 2024 15:30:42 on Wednesday
M&K (Miller & Kreisel): BMC-1 Bass Management Controller/NEAR MINT/Fully Tested!
End: 14.10. 2024 04:10:24 on Monday
- Condition: Used
- Price: 137.56 EUR
- Status: unsold
- Item number: 256667806074
- Bids: 0
- Seller: rstamberg (1886|100.0%)
- Seller information: non commercial
- Item location: Riverside, Connecticut
- Ships to: US
- Shipping: EUR
- on EBAY
-
Description
M&K BMC-1 Miller & Kreisel Sound Bass Management Controller in Near Mint condition. A hi-res Surround Bass Management system for audiophiles and film editors. The M&K Sound BMC-1 is a balanced, line-level studio bass management controller intended for use with M&K Sounds line of professional studio monitors and with high-end home theater installations. Although the BMC-1 was primarily designed for monitoring 5.1 audio, its flexible architecture allows it to be used for monitoring mono, stereo, Dolby Surround, Dolby Digital, DTS and other formats. The BMC-1 combines several necessary functions in one 19” rack mount 1RU package. Along with bass management and LFE channel control, it also provides individual channel adjustment capability to properly calibrate your entire monitor system. The controller consists of a series of five high-pass filters (one each for the L, C, R, LS, RS channels) that route high frequency information (above 80Hz) to their appropriate channels amplifier and speaker. Each channel is also routed through a matching 80Hz lowpass filter. This low frequency information is then routed to a summing amplifier, which in turn sends this low frequency information, along with the LFE channel, to two subwoofer outputs. This is done for two reasons. First, small loudspeakers may not be able to properly reproduce information below 80Hz. This information is therefore summed together and redirected from the individual channels to a loudspeaker that can reproduce this low frequency information with clarity and power “ a subwoofer. With the introduction of digital audio, it has become necessary for loudspeaker systems to be able to accurately reproduce audio that has a bandwidth of 20Hz to 20kHz with wide dynamics. A satellite/subwoofer system is the best way to accomplish this. Secondly, todays home theater receivers utilize bass management per Dolby requirements. In order for work done in the studio to translate properly, the mixer must hear his mix exactly the way it will ultimately be played back. The BMC-1 together with a properly set-up and calibrated M&K Sound monitor system allows the mixer to hear his work with more accuracy than might otherwise be possible. Front Panel Trim Controls +/- 12dB trim control for balancing the system. No PSU.
Lenco BMC-090BK - Karaoke Mikrofon - Bluetooth -Lichteffekte - USB/SD - Schwarz
End: 11.10. 2024 15:29:51 on Friday
Lenco BMC-180BK Karaoke Mikrofon mit Bluetooth - Schwarz NEU
End: 10.10. 2024 17:53:03 on Thursday
Lenco BMC-090BK - Karaoke Mikrofon - Bluetooth -Lichteffekte - USB/SD - Schwarz
End: 06.10. 2024 15:29:15 on Sunday
M&K (Miller & Kreisel): BMC-1 Bass Management Controller/NEAR MINT/Fully Tested!
End: 06.10. 2024 13:26:02 on Sunday
- Condition: Used
- Price: 137.99 EUR
- Status: unsold
- Item number: 256658762866
- Bids: 0
- Seller: rstamberg (1885|100.0%)
- Seller information: non commercial
- Item location: Riverside, Connecticut
- Ships to: US
- Shipping: EUR
- on EBAY
-
Description
M&K BMC-1 Miller & Kreisel Sound Bass Management Controller in Near Mint condition. A hi-res Surround Bass Management system for audiophiles and film editors. The M&K Sound BMC-1 is a balanced, line-level studio bass management controller intended for use with M&K Sounds line of professional studio monitors and with high-end home theater installations. Although the BMC-1 was primarily designed for monitoring 5.1 audio, its flexible architecture allows it to be used for monitoring mono, stereo, Dolby Surround, Dolby Digital, DTS and other formats. The BMC-1 combines several necessary functions in one 19” rack mount 1RU package. Along with bass management and LFE channel control, it also provides individual channel adjustment capability to properly calibrate your entire monitor system. The controller consists of a series of five high-pass filters (one each for the L, C, R, LS, RS channels) that route high frequency information (above 80Hz) to their appropriate channels amplifier and speaker. Each channel is also routed through a matching 80Hz lowpass filter. This low frequency information is then routed to a summing amplifier, which in turn sends this low frequency information, along with the LFE channel, to two subwoofer outputs. This is done for two reasons. First, small loudspeakers may not be able to properly reproduce information below 80Hz. This information is therefore summed together and redirected from the individual channels to a loudspeaker that can reproduce this low frequency information with clarity and power “ a subwoofer. With the introduction of digital audio, it has become necessary for loudspeaker systems to be able to accurately reproduce audio that has a bandwidth of 20Hz to 20kHz with wide dynamics. A satellite/subwoofer system is the best way to accomplish this. Secondly, todays home theater receivers utilize bass management per Dolby requirements. In order for work done in the studio to translate properly, the mixer must hear his mix exactly the way it will ultimately be played back. The BMC-1 together with a properly set-up and calibrated M&K Sound monitor system allows the mixer to hear his work with more accuracy than might otherwise be possible. Front Panel Trim Controls +/- 12dB trim control for balancing the system. No PSU.
Lenco BMC-180BK Karaoke Mikrofon mit Bluetooth - Schwarz NEU
End: 03.10. 2024 17:52:41 on Thursday
Lenco BMC-090BK - Karaoke Mikrofon - Bluetooth -Lichteffekte - USB/SD - Schwarz
End: 01.10. 2024 15:28:39 on Tuesday
M&K (Miller & Kreisel): BMC-1 Bass Management Controller/NEAR MINT/Fully Tested!
End: 29.09. 2024 13:25:44 on Sunday
- Condition: Used
- Price: 137.23 EUR
- Status: unsold
- Item number: 256650453808
- Bids: 0
- Seller: rstamberg (1884|100.0%)
- Seller information: non commercial
- Item location: Riverside, Connecticut
- Ships to: US
- Shipping: EUR
- on EBAY
-
Description
M&K BMC-1 Miller & Kreisel Sound Bass Management Controller in Near Mint condition. A hi-res Surround Bass Management system for audiophiles and film editors. The M&K Sound BMC-1 is a balanced, line-level studio bass management controller intended for use with M&K Sounds line of professional studio monitors and with high-end home theater installations. Although the BMC-1 was primarily designed for monitoring 5.1 audio, its flexible architecture allows it to be used for monitoring mono, stereo, Dolby Surround, Dolby Digital, DTS and other formats. The BMC-1 combines several necessary functions in one 19” rack mount 1RU package. Along with bass management and LFE channel control, it also provides individual channel adjustment capability to properly calibrate your entire monitor system. The controller consists of a series of five high-pass filters (one each for the L, C, R, LS, RS channels) that route high frequency information (above 80Hz) to their appropriate channels amplifier and speaker. Each channel is also routed through a matching 80Hz lowpass filter. This low frequency information is then routed to a summing amplifier, which in turn sends this low frequency information, along with the LFE channel, to two subwoofer outputs. This is done for two reasons. First, small loudspeakers may not be able to properly reproduce information below 80Hz. This information is therefore summed together and redirected from the individual channels to a loudspeaker that can reproduce this low frequency information with clarity and power “ a subwoofer. With the introduction of digital audio, it has become necessary for loudspeaker systems to be able to accurately reproduce audio that has a bandwidth of 20Hz to 20kHz with wide dynamics. A satellite/subwoofer system is the best way to accomplish this. Secondly, todays home theater receivers utilize bass management per Dolby requirements. In order for work done in the studio to translate properly, the mixer must hear his mix exactly the way it will ultimately be played back. The BMC-1 together with a properly set-up and calibrated M&K Sound monitor system allows the mixer to hear his work with more accuracy than might otherwise be possible. Front Panel Trim Controls +/- 12dB trim control for balancing the system. No PSU.
Lenco BMC-180BK Karaoke Mikrofon mit Bluetooth - Schwarz NEU
End: 26.09. 2024 17:52:15 on Thursday
Lenco BMC-090BK - Karaoke Mikrofon - Bluetooth -Lichteffekte - USB/SD - Schwarz
End: 26.09. 2024 15:06:10 on Thursday
M&K BMC-1 Miller & Kreisel Bass Management Controller/Near Mint/Works Perfectly!
End: 22.09. 2024 13:25:33 on Sunday
- Condition: Used
- Price: 136.51 EUR
- Status: unsold
- Item number: 256640959946
- Bids: 0
- Seller: rstamberg (1883|100.0%)
- Seller information: non commercial
- Item location: Riverside, Connecticut
- Ships to: US
- Shipping: EUR
- on EBAY
-
Description
M&K BMC-1 Miller & Kreisel Sound Bass Management Controller in Near Mint condition. A hi-res Surround Bass Management system for audiophiles and film editors. The M&K Sound BMC-1 is a balanced, line-level studio bass management controller intended for use with M&K Sounds line of professional studio monitors and with high-end home theater installations. Although the BMC-1 was primarily designed for monitoring 5.1 audio, its flexible architecture allows it to be used for monitoring mono, stereo, Dolby Surround, Dolby Digital, DTS and other formats. The BMC-1 combines several necessary functions in one 19” rack mount 1RU package. Along with bass management and LFE channel control, it also provides individual channel adjustment capability to properly calibrate your entire monitor system. The controller consists of a series of five high-pass filters (one each for the L, C, R, LS, RS channels) that route high frequency information (above 80Hz) to their appropriate channels amplifier and speaker. Each channel is also routed through a matching 80Hz lowpass filter. This low frequency information is then routed to a summing amplifier, which in turn sends this low frequency information, along with the LFE channel, to two subwoofer outputs. This is done for two reasons. First, small loudspeakers may not be able to properly reproduce information below 80Hz. This information is therefore summed together and redirected from the individual channels to a loudspeaker that can reproduce this low frequency information with clarity and power “ a subwoofer. With the introduction of digital audio, it has become necessary for loudspeaker systems to be able to accurately reproduce audio that has a bandwidth of 20Hz to 20kHz with wide dynamics. A satellite/subwoofer system is the best way to accomplish this. Secondly, todays home theater receivers utilize bass management per Dolby requirements. In order for work done in the studio to translate properly, the mixer must hear his mix exactly the way it will ultimately be played back. The BMC-1 together with a properly set-up and calibrated M&K Sound monitor system allows the mixer to hear his work with more accuracy than might otherwise be possible. Front Panel Trim Controls +/- 12dB trim control for balancing the system. No PSU.
Lenco BMC-090BK - Karaoke Mikrofon - Bluetooth -Lichteffekte - USB/SD - Schwarz
End: 21.09. 2024 15:05:00 on Saturday
B.M.C. Pure Amp Stereo Vollverstärker + Fernbedienung / BMC
End: 10.09. 2024 11:58:34 on Tuesday
Original Sony BMC-220 Operating Service Manual
End: 09.09. 2024 19:31:04 on Monday
- Condition: Gut
- Price: 17.87 EUR
- Status: unsold
- Item number: 204388923101
- Seller: wayner385 (2803|99.5%)
- Seller information: non commercial
- Item location: Cincinnati, Ohio
- Ships to: Worldwide
- Shipping: 60,86 EUR
- on EBAY
-
Description
Sony BMC-220 Original Operator/Service Manual Terms of SaleAll Buy it Now items require immediate payment. Auction payments are due within 24 hours after auction close. Return Policy Please view listing terms for Return policy information. If returns are offered item must be returned in condition it was received. Buyer pays for return shipping. Shipping & FeesI ship to Verified addresses only. I provide very fast shipping, usually within one business day. INTERNATIONAL BIDDERS: If my postal carrier does not offer insured packages to your country then I reserve the right to cancel the transaction and refund your money. You are responsible for any duties and customs fees that your country charges outside of the shipping and handling charges in this listing. Please do not ask me to alter customs forms with lower declared value of the item as this is ILLEGAL
Live search