From a BIC 960 Turntable but probably fits others BIC Turntable motor, tested and working

From a BIC 960 Turntable but probably fits others BIC 960 Turntable Cam Gear

From a BIC 960 Turntable but probably fits others BIC Turntable tonearm Wires clipped as close to final points as possible to ensure maximum length for effortless reinstallation

BIC 960 Turntable Record Support with hardware

BIC 960 Turntable Knobs

B•I•C / BIC A-11 Headshell w/ Coupler For 920/940/960/980/981/1000 - D This listing is for one used B•I•C A-11 headshell. It is in very good condition. I think it is original to the 1000 & 980 but will also fit the BIC model 981, 920, 940, & 960 turntables. The cartridge coupler is included. Also included is the “nut” for tightening the headshell. I do not ship outside of the United States or accept payments from non-U.S. registered accounts, even if your eBay “confirmed” shipping address is inside the U.S. SOLD “AS SHOWN” & “AS IS” I am not the original owner of most of the items I sell & I cannot guarantee THIS item is from a PET, CHILD, or SMOKE FREE environment. If you receive an item & there is an issue, PLEASE contact me BEFORE you leave feedback. Please check my other current listings. IT IS YOUR RESPONSIBILITY TO READ MY AUCTION TERMS. By BIDDING ON or using the BIN “Buy It Now” feature (If available) You ARE agreeing to My Auction Terms which are posted below. MY AUCTION TERMS: ALL ITEMS ARE SHIPPED BY USPS Ground Advantage Or Priority Mail TO YOUR “confirmed” eBay ACCOUNT ADDRESS. Bidding: U.S. registered eBay accounts ONLY. If you bought the wrong item, decided you do not want the item, or you hoped it was more than I stated in the listing, the item is yours to do whatever you like with it, with the exception of returning it to me &/or asking for a refund. Any unpaid item cases or cancelled winning bids/BINs will result in the buyer being permanently blocked from bidding on or buying any of my items. Warranty: Every item that I list is sold “AS SHOWN” & “AS IS” with NO WARRANTY, expressed or implied, unless I state a specific warranty within the description of the listed item in the auction. I spend a lot of time trying to describe all of the items that I list as accurately as I can. I am definitely not perfect & I do make mistakes. If you have ANY questions, need more information, or would like to see additional photos of the item that I have listed, ask me BEFORE you bid. I do not list any item that I know does not work as working. If the item is listed as USED or Refurbished, I cannot guarantee the item will work when you receive it as things can during the shipping process & vintage electronics can fail at any time. I do not accept returns; provide refunds (full or partial) or exchanges, with the exception of SNAD claims. If you win a SNAD claim, you will need to return the item to me packaged in the same way as your received it & in the same physical & functional condition as you claim you received the item. I will make a video of the unpacking & testing of ALL returned items to verify the condition of the item. ANY discrepancies will be reported to eBay. Payment: My PayPal account is set up to BLOCK payments from all non-U.S. registered PayPal accounts. I will only accept payments by accounts that are REGISTERED within the U.S. States & has a “confirmed” address. Shipping: I will only ship your item to your eBay “confirmed” address & the item will be shipped by either USPS Ground Advantage OR Priority Mail. Any item OR combination of items that sells for more than $74.99 will require an adults’ signature. I will not ship outside the United States. I do not charge for packaging, nor do I charge a handling fee. Everything I have posted on eBay is in my possession. I will usually ship your item within 3 “business days” (NOT including Saturday, Sunday, or Holidays) after I have received your payment.

BIC WB20 Walnut Base For 960 Turntable Also fits 980 and probably others Very nice condition no damage no scratches

Rubber mat from a BIC 960 turntable

This is a pair of dust cover hinges from a BIC 960 turntable. They are intended to work with the version of the BIC turntable base that uses these hinges and not the slot lever back. They are used and in good condition, and sold as-is.

From a BIC 960 Turntable but probably fits others BIC 960 Turntable Parts Lot

This is a headshell for use with the BIC 960, 980 or 1000 turntable. This headshell includes the mounting bracked/finger lift — but it does not include the wiring bracket for attaching a turntable cartridge. You will need a BIC wiring bracket to use this headshell with your BIC turntable. If you have a similar BIC headshell and have damaged it, and can transfer your wiring bracket to this headshell — that would be a feasible solution (the wiring bracket just slides into the slot on the side of the headshell). Due to the age of the headshell, its being sold as-is.

This is a pair of dust cover hinges from a BIC 960 turntable. They are intended to work with the version of the BIC turntable base that uses these hinges and not the slot lever back. They are used and in good condition, and sold as-is.

BIC 960 980 1000 Headshell assembly wth Shure M91ED cartridge The stylus is no good, you will need to replace it. Includes everything you see tone arm mounting bracket, screws, hardware, the whole lot.

Here is a Good working and looking spare BIC Model 960 / 980 fully Automatic Turntable record changer headshell / carriage sled, It had a terminal repair long ago but still works as is, Sold without M91 cartridge, Includes wires and headshell only. Thank you for the interest in my auction.

This BIC turntable platter and mat assembly is a must-have for anyone who loves the warm, rich sound of vinyl records. Designed for use with BIC turntables, this assembly is compatible with models 940, 960, and 980. Made in the United States, this platter mat is a high-quality accessory that will help you get the most out of your record player. The BIC turntable platter and mat assembly is perfect for those who want to enjoy their vinyl records without worrying about the condition of their equipment. With its durable construction and compatibility with BIC turntables, this platter mat is a great investment for any music lover. So why wait? Order your BIC turntable platter and mat assembly today and start enjoying your favorite records like never before!

BIC 940, 960, 980, 981 BELT DRIVE TURNTABLE CAM GEAR ASSEMBLY. Condition is Used. Shipped with USPS Ground Advantage.

Get your BIC turntable up and running with this platter shaft support housing bearing assembly. The silver-colored unit is compatible with BIC turntables such as 940, 960, 980, and 981, among others. It features washable bearings and is designed for North American plug regional fitment. This unit type is a platter shaft support housing bearing assembly that comes with a single unit quantity. It is made in the United States and is compatible with the BIC turntable product line. Get this essential turntable part for your BIC turntable today and enjoy quality music playback.

This is a headshell for use with the BIC 960, 980 or 1000 turntable. This headshell includes the mounting bracked/finger lift — but it does not include the wiring bracket for attaching a turntable cartridge. You will need a BIC wiring bracket to use this headshell with your BIC turntable. If you have a similar BIC headshell and have damaged it, and can transfer your wiring bracket to this headshell — that would be a feasible solution (the wiring bracket just slides into the slot on the side of the headshell). Due to the age of the headshell, its being sold as-is.

This is a pair of dust cover hinges from a BIC 960 turntable. They are intended to work with the version of the BIC turntable base that uses these hinges and not the slot lever back. They are used and in good condition, and sold as-is.

BIC 960/980 Others TURNTABLE ARM COUNTER WEIGHT, in good used condition, as pictured. Please see the images of the actual item above for a better idea of the condition. The winner will pay postage and tracking, which is included in the shipping total. I am always happy to combine shipping whenever possible, please ask for a combined invoice after adding all items to your cart. Check out my other items! Please contact me with any issues prior to leaving negative/neutral Feedback or low detail ratings, as I will always do my best to solve any problems that may come up!

Here is a factory Knurled retaining nut for the removable head-shells on BIC Automatic turntables removed from a working BIC Model 980 fully Automatic Turntable record changers headshell Thank you for the interest in my auction.

Here is a Good working and looking spare BIC Model 960 / 980 fully Automatic Turntable record changer headshell / carriage with a good tested SHURE M91ED magnetic stereo phono cartridge, It had a terminal repair long ago but still works as is, Sold with cartridge wires and headshell only. Thank you for the interest in my auction.

Offered is a near complete BIC series 960 turntable tonearm assembly (missing the M2.5 thumb screw, but a nut works as well) in very good condition. There is a Empire OP2 cartridge and stylus which works (it tracks and plays well enough) but the actual condition of the stylus needle is unknown (you should assume it has wear). The OP2 stylus has some value but, if you dont want it, then just make an offer for the tonearm assembly alone. A question was submitted, whether the tonearms tracking and antiskate adjustment sliders were loose.Answer: The antiskate adjuster moves slightly more easily than the stylus force. The moment to lower number feels as if there is slightly less resistance than in the opposite direction. In both cases the black plastic clip takes a slight bit of force before it slides and this release movement is sudden, especially if you use just one finger. Thereafter the motion is smooth. In my opinion, it certainly isnt floppy but I really dont know how tight it was when new. Note: Refer to the third photo. This antiskate/stylus force ring is a thin ribbon of sheet metal. There is a slight bend in the metal just past the 4 on the stylus force side. It is only a cosmetic issue. This item comes with a 30 day return; buyer pays return shipping. Thanks for looking.