Here is a Good working and looking spare BIC Model 960 / 980 fully Automatic Turntable record changer headshell / carriage with a good tested SHURE M91ED magnetic stereo phono cartridge, It had a terminal repair long ago but still works as is, Sold with cartridge wires and headshell only. Thank you for the interest in my auction.

Here is a factory Knurled retaining nut for the removable head-shells on BIC Automatic turntables removed from a working BIC Model 980 fully Automatic Turntable record changers headshell Thank you for the interest in my auction.

Here is a factory Knurled retaining nut for the removable head-shells on BIC Automatic turntables removed from a working BIC Model 980 fully Automatic Turntable record changers headshell Thank you for the interest in my auction.

Here is a Good working and looking spare BIC Model 960 / 980 fully Automatic Turntable record changer headshell / carriage with a good tested SHURE M91ED magnetic stereo phono cartridge, It had a terminal repair long ago but still works as is, Sold with cartridge wires and headshell only. Thank you for the interest in my auction.

BIC TURNTABLE RECORD SPINDLE -- 940/ 960/ 980 AND OTHERS. Condition is Used. Shipped with USPS Ground Advantage.

4 BIC Turntable Rubber Suspension Feet Bumpers For Models 981, 980, 960, 940. Taken from a BIC 940 turntable.

Offered is a near complete BIC series 960 turntable tonearm assembly (missing the M2.5 thumb screw, but a nut works as well) in very good condition. There is a Empire OP2 cartridge and stylus which works (it tracks and plays well enough) but the actual condition of the stylus needle is unknown (you should assume it has wear). The OP2 stylus has some value but, if you dont want it, then just make an offer for the tonearm assembly alone. A question was submitted, whether the tonearms tracking and antiskate adjustment sliders were loose.Answer: The antiskate adjuster moves slightly more easily than the stylus force. The moment to lower number feels as if there is slightly less resistance than in the opposite direction. In both cases the black plastic clip takes a slight bit of force before it slides and this release movement is sudden, especially if you use just one finger. Thereafter the motion is smooth. In my opinion, it certainly isnt floppy but I really dont know how tight it was when new. Note: Refer to the third photo. This antiskate/stylus force ring is a thin ribbon of sheet metal. There is a slight bend in the metal just past the 4 on the stylus force side. It is only a cosmetic issue. This item comes with a 30 day return; buyer pays return shipping. Thanks for looking.

This is a BIC 960 turntable part that is perfect for those in need of a micro switch for power use. This item is compatible with BIC brands and is of the switch type. Ideal for those who enjoy maintaining their own electronic devices or require a specific part for a repair job. It is a reliable and essential component for your turntable.

This BIC 960 turntable tonearm assembly is the perfect replacement for your old or damaged tonearm. Made for BIC turntables, this silver tonearm is compatible with the BIC 960 turntable model. It comes with everything you need to get your turntable up and running again. This tonearm unit is a genuine BIC part, made in the United States, and comes with a North American plug regional fitment. It is designed for use with BIC 960 turntables and is compatible with BIC turntables of the same model. Don't let a broken tonearm stop you from enjoying your music – this replacement unit will have you back up and running in no time.

This BIC turntable platter and mat assembly is a must-have for anyone who loves the warm, rich sound of vinyl records. Designed for use with BIC turntables, this assembly is compatible with models 940, 960, and 980. Made in the United States, this platter mat is a high-quality accessory that will help you get the most out of your record player. The BIC turntable platter and mat assembly is perfect for those who want to enjoy their vinyl records without worrying about the condition of their equipment. With its durable construction and compatibility with BIC turntables, this platter mat is a great investment for any music lover. So why wait? Order your BIC turntable platter and mat assembly today and start enjoying your favorite records like never before!

Get your BIC turntable up and running with this platter shaft support housing bearing assembly. The silver-colored unit is compatible with BIC turntables such as 940, 960, 980, and 981, among others. It features washable bearings and is designed for North American plug regional fitment. This unit type is a platter shaft support housing bearing assembly that comes with a single unit quantity. It is made in the United States and is compatible with the BIC turntable product line. Get this essential turntable part for your BIC turntable today and enjoy quality music playback.

BIC 940, 960, 980, 981 BELT DRIVE TURNTABLE CAM GEAR ASSEMBLY. Condition is Used. Shipped with USPS Ground Advantage.

ORIGINAL BIC TURNTABLE CAM GEAR ASSEMBLY FOR 940, 960, 980, 981 OEM PARTS

BIC 960 Turntable Control Board - Buttons, plastic grommets, levers, etc. Condition is For parts or not working. Shipped with USPS Ground Advantage.

Here is a factory tonearm mating fixture with the 4 male pin connector for the removable head-shells on BIC 900 Automatic turntables removed from a BIC Model 980 fully Automatic Turntable record changers head-shell Thank you for the interest in my auction.

This is a complete set of 9 springs for the Original BIC 960 Turntable. These springs are compatible with BIC 960 Turntables and have a unit quantity of 9. The springs are black in color and have a unit type of unit. They are made in the United States and have a plug regional fitment of U.S.A. These springs have features that make them perfect for your BIC 960 Turntable. They are ideal for those looking for parts for their turntable without talking about the condition of the item. This is a great opportunity to upgrade your turntable parts and get that perfect sound you've been looking for.

BIC 960/980 Others TURNTABLE ARM COUNTER WEIGHT, in good used condition, as pictured. Please see the images of the actual item above for a better idea of the condition. The winner will pay postage and tracking, which is included in the shipping total. I am always happy to combine shipping whenever possible, please ask for a combined invoice after adding all items to your cart. Check out my other items! Please contact me with any issues prior to leaving negative/neutral Feedback or low detail ratings, as I will always do my best to solve any problems that may come up!

BIC 960 Turntable Control Board - Buttons, plastic grommets, levers, etc. Condition is For parts or not working. Shipped with USPS Ground Advantage.

This dust cover is specifically designed for BIC 960 turntables. It is made of high-quality materials that provide maximum protection to your turntable from dust, dirt, and scratches. The cover fits perfectly over your turntable and is easy to remove when you need to use it. It is a must-have accessory for any BIC 960 turntable owner who wants to keep their turntable in pristine condition. The cover is compatible with BIC brand turntables and is ideal for use in record player and TV, video & audio parts. It is an essential accessory for any music lover who wants to protect their turntable and keep it in top condition. Purchase this BIC 960 turntable dust cover today and keep your turntable looking brand new for years to come.

This original OEM BIC part is a must-have for BIC 960 turntable owners. It is a tonearm rest designed specifically for BIC 960 turntables and is compatible with BIC products only. The tonearm rest is in the perfect condition to ensure it functions smoothly, making it ideal for those who are looking to restore their BIC turntable to its original glory. It is a great replacement part for those whose tonearm rest is damaged or missing, and it will keep your turntable looking and sounding great.

Here is a factory Knurled retaining nut for the removable head-shells on BIC Automatic turntables removed from a working BIC Model 980 fully Automatic Turntable record changers headshell Thank you for the interest in my auction.

Here is a Good working and looking spare BIC Model 960 / 980 fully Automatic Turntable record changer headshell / carriage with a good tested SHURE M91ED magnetic stereo phono cartridge, It had a terminal repair long ago but still works as is, Sold with cartridge wires and headshell only. Thank you for the interest in my auction.

BIC TURNTABLE LONG RECORD SPINDLE For 920, 940, 960, 980 Bic turntable automatic stacking spindle part A-3Came with a 940 turntable but was never used

Offered is the aluminum turntable platter and mat from a BIC 960 turntable (fits 900 series and possibly others ) in very good condition. This item comes with free USPS shipping and a 30 day return; buyer pays return shipping. Thanks for looking.