TECHNICS RS-AZ6 AMORPHOUS Z 3-HEAD STEREO CASSETTE DECK MADE IN JAPAN NO REMOTE.

Specifications Type: 3-head, single compact cassette deck, Linear Magnetic Field, Class AA Track System: 4-track, 2-channel stereo Tape Speed: 4.8 cm/s Heads: 1 x combination record/playback, 1 x erase Motor: 1 x reel, 1 x capstan Tape Type: type I, CrO2, Metal Noise Reduction: B, C Headroom Extension: HX Pro Frequency Response: 20Hz to 23kHz (Metal tape) Signal to Noise Ratio: 78dB (dolby C) Wow and Flutter: 0.07% Input: 100mV (line) Output: 0.5V (line) Dimensions: 430 x 125 x 290mm This Technics RS-AZ7 is a stereo cassette deck with Dolby B/C and HX-Pro noise reduction. The main features of the Technics RS-AZ7 are: 3 heads and off-tape monitoring, digital linear tape counter with 4 digits and memory stop, automatic tape type selection and capable of handling normal, chrome and metal tapes, belt driven single-capstan transport. Typical front loading cassette deck with the cassette compartiment located on the center of the deck. Tape loading/unloading is operated motorized and the cassette needs to be placed with the side to be played facing forward in the cassette well. Level meters used on the RS-AZ7 are generic digital peak reading meters. Full-logic transport controls used on the RS-AZ7 let it respond to the slightest finger contact for fast and effortless transport function selection. To ensure the best response from the wide variety of tapes available adjustment of, bias, equalization and sensitivity, to optimum levels can be performed prior to recording. Dolby C-type used in the RS-AZ7 provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. The Dolby HX PRO system provides precise bias control during recording to reduce distortion and improve linearity in the high-frequency range, the result is recorded sound that is highly faithful to the original. The 19kHz multiplex pilot slgnal present in FM stereo broadcasts can cause false triggering of the noise reduction system. The switchable MPX filter of the RS-AZ7 filters out the pilot signal, and assuring proper Dolby processing of FM stereo programs. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. All main transport commands can be issued remotely with a wireless remote control. Daten Allgemein Hersteller:Technics Modell: RS-AZ 7 Typ: Einzel Baujahre: 1996-2001 Hergestellt in: Japan Farbe: Braun-Anthrazit - Schatten von Schwarz (Technics - Farbe) Fernbedienung: Nein, aber Sensor eingebaut Leistungsaufnahme: Abmessungen: 430 x 125 x 290 mm Anschlüsse Anzahl der Eingänge: 2 Cinch (RCA) Stereo Sensor für Steuerungsbefehle per Fernbedienung Anzahl der Ausgänge: 2 Cinch (RCA) Stereo Kopfhörerausgang, 6,3 mm (regelbar) Technische Daten Tonköpfe: 3 Motoren: 2 Gleichlaufschwankungen: 0,07% (WRMS) Bandarten: Frequenzgang: Normal: 30 Hz ~ 17 kHz, +/- 3dB ; 20 Hz ~ 18 kHz (DIN) CrO2: 30 Hz ~ 18 kHz, +/- 3dB ; 20 Hz ~ 19 kHz (DIN) Metal: 30 Hz ~ 23 kHz, +/- 3dB ; 20 Hz ~ 24 kHz (DIN) Klirrfaktor: Signalrauschabstand: (Signalpegel = Vollaussteuerung; CrO2-Band) mit Dolby C Rauschunterdrückung: 78 DB; mit Dolby B Rauschunterdrückung: 71 DB; ohne Rauschunterdrückung: 62 DB; Auto-Reverse: Nein Titelsuchlauf: Ja, TPS Dolby: Dolby B, C, HX Pro MPX-Filter: Ja, zuschaltbar Fader: Nein Pitch-Kontrolle: Nein CD-Synchro-Aufnahme: Nein Besondere Ausstattungen Technics Class-AA - Gerät Linear Magnet-Field Class-AA-Schaltung in der Aufnahmeelektronik Bandeinmessung (Advanced ATC) Vibrationsdämpfender THCB-Gehäuseboden 3-Kopf-System mit Dünnfilmkopf (Amorphous Z) Automatische Wahl von Vor- und Hinterbandkontrolle (Monitorschaltung)2-Motorenlaufwerk mit Logiksteuerung Schnelles Umspulen (ca. 35 Sek. bei C-60-Kassetten) Laufwerk mit Logiksteuerung und 2 Motoren motorisiertes Kassettenfach Direktwiedergabeteste (PLAY DIRECT) Fernbedienbar (über Technics-Systemfernbedienung) Zuschaltbarer MPX-Filter Lineares elektronisches Bandzählwerk mit Echtzeitanzeige Titelsuchlauf (TPS) Automatische Bandsorteneinstellung Aussteuerungsregler, separater Balanceregler Kopfhöreranschluß mit Lautstärkeregelung Timer-Funktion (Zeituhr zuschaltbar) präziser, fester Sitz der Kassette durch motorische Kontrolle

Specifications Type: 3-head, single compact cassette deck, Linear Magnetic Field, Class AA Track System: 4-track, 2-channel stereo Tape Speed: 4.8 cm/s Heads: 1 x combination record/playback, 1 x erase Motor: 1 x reel, 1 x capstan Tape Type: type I, CrO2, Metal Noise Reduction: B, C Headroom Extension: HX Pro Frequency Response: 20Hz to 23kHz (Metal tape) Signal to Noise Ratio: 78dB (dolby C) Wow and Flutter: 0.07% Input: 100mV (line) Output: 0.5V (line) Dimensions: 430 x 125 x 290mm This Technics RS-AZ7 is a stereo cassette deck with Dolby B/C and HX-Pro noise reduction. The main features of the Technics RS-AZ7 are: 3 heads and off-tape monitoring, digital linear tape counter with 4 digits and memory stop, automatic tape type selection and capable of handling normal, chrome and metal tapes, belt driven single-capstan transport. Typical front loading cassette deck with the cassette compartiment located on the center of the deck. Tape loading/unloading is operated motorized and the cassette needs to be placed with the side to be played facing forward in the cassette well. Level meters used on the RS-AZ7 are generic digital peak reading meters. Full-logic transport controls used on the RS-AZ7 let it respond to the slightest finger contact for fast and effortless transport function selection. To ensure the best response from the wide variety of tapes available adjustment of, bias, equalization and sensitivity, to optimum levels can be performed prior to recording. Dolby C-type used in the RS-AZ7 provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. The Dolby HX PRO system provides precise bias control during recording to reduce distortion and improve linearity in the high-frequency range, the result is recorded sound that is highly faithful to the original. The 19kHz multiplex pilot slgnal present in FM stereo broadcasts can cause false triggering of the noise reduction system. The switchable MPX filter of the RS-AZ7 filters out the pilot signal, and assuring proper Dolby processing of FM stereo programs. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. All main transport commands can be issued remotely with a wireless remote control. Daten Allgemein Hersteller:Technics Modell: RS-AZ 7 Typ: Einzel Baujahre: 1996-2001 Hergestellt in: Japan Farbe: Braun-Anthrazit - Schatten von Schwarz (Technics - Farbe) Fernbedienung: Nein, aber Sensor eingebaut Leistungsaufnahme: Abmessungen: 430 x 125 x 290 mm Anschlüsse Anzahl der Eingänge: 2 Cinch (RCA) Stereo Sensor für Steuerungsbefehle per Fernbedienung Anzahl der Ausgänge: 2 Cinch (RCA) Stereo Kopfhörerausgang, 6,3 mm (regelbar) Technische Daten Tonköpfe: 3 Motoren: 2 Gleichlaufschwankungen: 0,07% (WRMS) Bandarten: Frequenzgang: Normal: 30 Hz ~ 17 kHz, +/- 3dB ; 20 Hz ~ 18 kHz (DIN) CrO2: 30 Hz ~ 18 kHz, +/- 3dB ; 20 Hz ~ 19 kHz (DIN) Metal: 30 Hz ~ 23 kHz, +/- 3dB ; 20 Hz ~ 24 kHz (DIN) Klirrfaktor: Signalrauschabstand: (Signalpegel = Vollaussteuerung; CrO2-Band) mit Dolby C Rauschunterdrückung: 78 DB; mit Dolby B Rauschunterdrückung: 71 DB; ohne Rauschunterdrückung: 62 DB; Auto-Reverse: Nein Titelsuchlauf: Ja, TPS Dolby: Dolby B, C, HX Pro MPX-Filter: Ja, zuschaltbar Fader: Nein Pitch-Kontrolle: Nein CD-Synchro-Aufnahme: Nein Besondere Ausstattungen Technics Class-AA - Gerät Linear Magnet-Field Class-AA-Schaltung in der Aufnahmeelektronik Bandeinmessung (Advanced ATC) Vibrationsdämpfender THCB-Gehäuseboden 3-Kopf-System mit Dünnfilmkopf (Amorphous Z) Automatische Wahl von Vor- und Hinterbandkontrolle (Monitorschaltung)2-Motorenlaufwerk mit Logiksteuerung Schnelles Umspulen (ca. 35 Sek. bei C-60-Kassetten) Laufwerk mit Logiksteuerung und 2 Motoren motorisiertes Kassettenfach Direktwiedergabeteste (PLAY DIRECT) Fernbedienbar (über Technics-Systemfernbedienung) Zuschaltbarer MPX-Filter Lineares elektronisches Bandzählwerk mit Echtzeitanzeige Titelsuchlauf (TPS) Automatische Bandsorteneinstellung Aussteuerungsregler, separater Balanceregler Kopfhöreranschluß mit Lautstärkeregelung Timer-Funktion (Zeituhr zuschaltbar) präziser, fester Sitz der Kassette durch motorische Kontrolle

TEAC V66C Cassette deck. Totalmente servo assistito Svuotiamo i nostri scaffali per recupero spazio Lapparecchio si accende ma non è stato testato, potrebbe funzionare, oppure funzionare solo in parte, o ancora non funzionare, avere vari difetti anche estetici e in casi limite essere mancante di piccole parti, è fondo di magazzino e viene venduto nello stato in cui si trova come da foto per riparazione o recupero parti. Manca lo sportello chiusura vano cassetta (vedi foto) Lo vendo nello stato in cui si trova come da dettagliate foto per riparazione o recupero parti. - Le nostre spedizioni sono tutte tracciabili e verificabili nel tragitto - - Per ragioni logistiche non ci è possibile fare spedizioni cumulative -

Specifications Type: 3-head, single compact cassette deck, Linear Magnetic Field, Class AATrack System: 4-track, 2-channel stereo Tape Speed: 4.8 cm/s Heads: 1 x combination record/playback, 1 x erase Motor: 1 x reel, 1 x capstan Tape Type: type I, CrO2, Metal Noise Reduction: B, C Headroom Extension: HX Pro Frequency Response: 20Hz to 23kHz (Metal tape) Signal to Noise Ratio: 78dB (dolby C) Wow and Flutter: 0.07% Input: 100mV (line) Output: 0.5V (line) Dimensions: 430 x 125 x 290mm This Technics RS-AZ7 is a stereo cassette deck with Dolby B/C and HX-Pro noise reduction. The main features of the Technics RS-AZ7 are: 3 heads and off-tape monitoring, digital linear tape counter with 4 digits and memory stop, automatic tape type selection and capable of handling normal, chrome and metal tapes, belt driven single-capstan transport. Typical front loading cassette deck with the cassette compartiment located on the center of the deck. Tape loading/unloading is operated motorized and the cassette needs to be placed with the side to be played facing forward in the cassette well. Level meters used on the RS-AZ7 are generic digital peak reading meters. Full-logic transport controls used on the RS-AZ7 let it respond to the slightest finger contact for fast and effortless transport function selection. To ensure the best response from the wide variety of tapes available adjustment of, bias, equalization and sensitivity, to optimum levels can be performed prior to recording. Dolby C-type used in the RS-AZ7 provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. The Dolby HX PRO system provides precise bias control during recording to reduce distortion and improve linearity in the high-frequency range, the result is recorded sound that is highly faithful to the original. The 19kHz multiplex pilot slgnal present in FM stereo broadcasts can cause false triggering of the noise reduction system. The switchable MPX filter of the RS-AZ7 filters out the pilot signal, and assuring proper Dolby processing of FM stereo programs. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. All main transport commands can be issued remotely with a wireless remote control.

Specifications Type: 3-head, single compact cassette deck, Linear Magnetic Field, Class AA Track System: 4-track, 2-channel stereo Tape Speed: 4.8 cm/s Heads: 1 x combination record/playback, 1 x erase Motor: 1 x reel, 1 x capstan Tape Type: type I, CrO2, Metal Noise Reduction: B, C Headroom Extension: HX Pro Frequency Response: 20Hz to 23kHz (Metal tape) Signal to Noise Ratio: 78dB (dolby C) Wow and Flutter: 0.07% Input: 100mV (line) Output: 0.5V (line) Dimensions: 430 x 125 x 290mm This Technics RS-AZ7 is a stereo cassette deck with Dolby B/C and HX-Pro noise reduction. The main features of the Technics RS-AZ7 are: 3 heads and off-tape monitoring, digital linear tape counter with 4 digits and memory stop, automatic tape type selection and capable of handling normal, chrome and metal tapes, belt driven single-capstan transport. Typical front loading cassette deck with the cassette compartiment located on the center of the deck. Tape loading/unloading is operated motorized and the cassette needs to be placed with the side to be played facing forward in the cassette well. Level meters used on the RS-AZ7 are generic digital peak reading meters. Full-logic transport controls used on the RS-AZ7 let it respond to the slightest finger contact for fast and effortless transport function selection. To ensure the best response from the wide variety of tapes available adjustment of, bias, equalization and sensitivity, to optimum levels can be performed prior to recording. Dolby C-type used in the RS-AZ7 provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. The Dolby HX PRO system provides precise bias control during recording to reduce distortion and improve linearity in the high-frequency range, the result is recorded sound that is highly faithful to the original. The 19kHz multiplex pilot slgnal present in FM stereo broadcasts can cause false triggering of the noise reduction system. The switchable MPX filter of the RS-AZ7 filters out the pilot signal, and assuring proper Dolby processing of FM stereo programs. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. All main transport commands can be issued remotely with a wireless remote control. Daten Allgemein Hersteller:Technics Modell: RS-AZ 7 Typ: Einzel Baujahre: 1996-2001 Hergestellt in: Japan Farbe: Braun-Anthrazit - Schatten von Schwarz (Technics - Farbe) Fernbedienung: Nein, aber Sensor eingebaut Leistungsaufnahme: Abmessungen: 430 x 125 x 290 mm Anschlüsse Anzahl der Eingänge: 2 Cinch (RCA) Stereo Sensor für Steuerungsbefehle per Fernbedienung Anzahl der Ausgänge: 2 Cinch (RCA) Stereo Kopfhörerausgang, 6,3 mm (regelbar) Technische Daten Tonköpfe: 3 Motoren: 2 Gleichlaufschwankungen: 0,07% (WRMS) Bandarten: Frequenzgang: Normal: 30 Hz ~ 17 kHz, +/- 3dB ; 20 Hz ~ 18 kHz (DIN) CrO2: 30 Hz ~ 18 kHz, +/- 3dB ; 20 Hz ~ 19 kHz (DIN) Metal: 30 Hz ~ 23 kHz, +/- 3dB ; 20 Hz ~ 24 kHz (DIN) Klirrfaktor: Signalrauschabstand: (Signalpegel = Vollaussteuerung; CrO2-Band) mit Dolby C Rauschunterdrückung: 78 DB; mit Dolby B Rauschunterdrückung: 71 DB; ohne Rauschunterdrückung: 62 DB; Auto-Reverse: Nein Titelsuchlauf: Ja, TPS Dolby: Dolby B, C, HX Pro MPX-Filter: Ja, zuschaltbar Fader: Nein Pitch-Kontrolle: Nein CD-Synchro-Aufnahme: Nein Besondere Ausstattungen Technics Class-AA - Gerät Linear Magnet-Field Class-AA-Schaltung in der Aufnahmeelektronik Bandeinmessung (Advanced ATC) Vibrationsdämpfender THCB-Gehäuseboden 3-Kopf-System mit Dünnfilmkopf (Amorphous Z) Automatische Wahl von Vor- und Hinterbandkontrolle (Monitorschaltung)2-Motorenlaufwerk mit Logiksteuerung Schnelles Umspulen (ca. 35 Sek. bei C-60-Kassetten) Laufwerk mit Logiksteuerung und 2 Motoren motorisiertes Kassettenfach Direktwiedergabeteste (PLAY DIRECT) Fernbedienbar (über Technics-Systemfernbedienung) Zuschaltbarer MPX-Filter Lineares elektronisches Bandzählwerk mit Echtzeitanzeige Titelsuchlauf (TPS) Automatische Bandsorteneinstellung Aussteuerungsregler, separater Balanceregler Kopfhöreranschluß mit Lautstärkeregelung Timer-Funktion (Zeituhr zuschaltbar) präziser, fester Sitz der Kassette durch motorische Kontrolle

vhs videorecorder panasonic Amorphous Pro Head. Der Videorecorder funktioniert 1a! Er kann gerne besichtigt und getestet werden. Fernbedienung und Timer inbegriffen. Abholung oder Versand möglich. Es handelt sich um einen privaten Verkauf. Garantie und Rückgabe ausgeschlossen.

Specifications Type: 3-head, single compact cassette deck, Linear Magnetic Field, Class AA Track System: 4-track, 2-channel stereo Tape Speed: 4.8 cm/s Heads: 1 x combination record/playback, 1 x erase Motor: 1 x reel, 1 x capstan Tape Type: type I, CrO2, Metal Noise Reduction: B, C Headroom Extension: HX Pro Frequency Response: 20Hz to 23kHz (Metal tape) Signal to Noise Ratio: 78dB (dolby C) Wow and Flutter: 0.07% Input: 100mV (line) Output: 0.5V (line) Dimensions: 430 x 125 x 290mm This Technics RS-AZ7 is a stereo cassette deck with Dolby B/C and HX-Pro noise reduction. The main features of the Technics RS-AZ7 are: 3 heads and off-tape monitoring, digital linear tape counter with 4 digits and memory stop, automatic tape type selection and capable of handling normal, chrome and metal tapes, belt driven single-capstan transport. Typical front loading cassette deck with the cassette compartiment located on the center of the deck. Tape loading/unloading is operated motorized and the cassette needs to be placed with the side to be played facing forward in the cassette well. Level meters used on the RS-AZ7 are generic digital peak reading meters. Full-logic transport controls used on the RS-AZ7 let it respond to the slightest finger contact for fast and effortless transport function selection. To ensure the best response from the wide variety of tapes available adjustment of, bias, equalization and sensitivity, to optimum levels can be performed prior to recording. Dolby C-type used in the RS-AZ7 provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. The Dolby HX PRO system provides precise bias control during recording to reduce distortion and improve linearity in the high-frequency range, the result is recorded sound that is highly faithful to the original. The 19kHz multiplex pilot slgnal present in FM stereo broadcasts can cause false triggering of the noise reduction system. The switchable MPX filter of the RS-AZ7 filters out the pilot signal, and assuring proper Dolby processing of FM stereo programs. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. All main transport commands can be issued remotely with a wireless remote control. Daten Allgemein Hersteller:Technics Modell: RS-AZ 7 Typ: Einzel Baujahre: 1996-2001 Hergestellt in: Japan Farbe: Braun-Anthrazit - Schatten von Schwarz (Technics - Farbe) Fernbedienung: Nein, aber Sensor eingebaut Leistungsaufnahme: Abmessungen: 430 x 125 x 290 mm Anschlüsse Anzahl der Eingänge: 2 Cinch (RCA) Stereo Sensor für Steuerungsbefehle per Fernbedienung Anzahl der Ausgänge: 2 Cinch (RCA) Stereo Kopfhörerausgang, 6,3 mm (regelbar) Technische Daten Tonköpfe: 3 Motoren: 2 Gleichlaufschwankungen: 0,07% (WRMS) Bandarten: Frequenzgang: Normal: 30 Hz ~ 17 kHz, +/- 3dB ; 20 Hz ~ 18 kHz (DIN) CrO2: 30 Hz ~ 18 kHz, +/- 3dB ; 20 Hz ~ 19 kHz (DIN) Metal: 30 Hz ~ 23 kHz, +/- 3dB ; 20 Hz ~ 24 kHz (DIN) Klirrfaktor: Signalrauschabstand: (Signalpegel = Vollaussteuerung; CrO2-Band) mit Dolby C Rauschunterdrückung: 78 DB; mit Dolby B Rauschunterdrückung: 71 DB; ohne Rauschunterdrückung: 62 DB; Auto-Reverse: Nein Titelsuchlauf: Ja, TPS Dolby: Dolby B, C, HX Pro MPX-Filter: Ja, zuschaltbar Fader: Nein Pitch-Kontrolle: Nein CD-Synchro-Aufnahme: Nein Besondere Ausstattungen Technics Class-AA - Gerät Linear Magnet-Field Class-AA-Schaltung in der Aufnahmeelektronik Bandeinmessung (Advanced ATC) Vibrationsdämpfender THCB-Gehäuseboden 3-Kopf-System mit Dünnfilmkopf (Amorphous Z) Automatische Wahl von Vor- und Hinterbandkontrolle (Monitorschaltung)2-Motorenlaufwerk mit Logiksteuerung Schnelles Umspulen (ca. 35 Sek. bei C-60-Kassetten) Laufwerk mit Logiksteuerung und 2 Motoren motorisiertes Kassettenfach Direktwiedergabeteste (PLAY DIRECT) Fernbedienbar (über Technics-Systemfernbedienung) Zuschaltbarer MPX-Filter Lineares elektronisches Bandzählwerk mit Echtzeitanzeige Titelsuchlauf (TPS) Automatische Bandsorteneinstellung Aussteuerungsregler, separater Balanceregler Kopfhöreranschluß mit Lautstärkeregelung Timer-Funktion (Zeituhr zuschaltbar) präziser, fester Sitz der Kassette durch motorische Kontrolle

Specifications Type: 3-head, single compact cassette deck, Linear Magnetic Field, Class AATrack System: 4-track, 2-channel stereo Tape Speed: 4.8 cm/s Heads: 1 x combination record/playback, 1 x erase Motor: 1 x reel, 1 x capstan Tape Type: type I, CrO2, Metal Noise Reduction: B, C Headroom Extension: HX Pro Frequency Response: 20Hz to 23kHz (Metal tape) Signal to Noise Ratio: 78dB (dolby C) Wow and Flutter: 0.07% Input: 100mV (line) Output: 0.5V (line) Dimensions: 430 x 125 x 290mm This Technics RS-AZ7 is a stereo cassette deck with Dolby B/C and HX-Pro noise reduction. The main features of the Technics RS-AZ7 are: 3 heads and off-tape monitoring, digital linear tape counter with 4 digits and memory stop, automatic tape type selection and capable of handling normal, chrome and metal tapes, belt driven single-capstan transport. Typical front loading cassette deck with the cassette compartiment located on the center of the deck. Tape loading/unloading is operated motorized and the cassette needs to be placed with the side to be played facing forward in the cassette well. Level meters used on the RS-AZ7 are generic digital peak reading meters. Full-logic transport controls used on the RS-AZ7 let it respond to the slightest finger contact for fast and effortless transport function selection. To ensure the best response from the wide variety of tapes available adjustment of, bias, equalization and sensitivity, to optimum levels can be performed prior to recording. Dolby C-type used in the RS-AZ7 provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. The Dolby HX PRO system provides precise bias control during recording to reduce distortion and improve linearity in the high-frequency range, the result is recorded sound that is highly faithful to the original. The 19kHz multiplex pilot slgnal present in FM stereo broadcasts can cause false triggering of the noise reduction system. The switchable MPX filter of the RS-AZ7 filters out the pilot signal, and assuring proper Dolby processing of FM stereo programs. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. All main transport commands can be issued remotely with a wireless remote control.

Specifications Type: 3-head, single compact cassette deck, Linear Magnetic Field, Class AA Track System: 4-track, 2-channel stereo Tape Speed: 4.8 cm/s Heads: 1 x combination record/playback, 1 x erase Motor: 1 x reel, 1 x capstan Tape Type: type I, CrO2, Metal Noise Reduction: B, C Headroom Extension: HX Pro Frequency Response: 20Hz to 23kHz (Metal tape) Signal to Noise Ratio: 78dB (dolby C) Wow and Flutter: 0.07% Input: 100mV (line) Output: 0.5V (line) Dimensions: 430 x 125 x 290mm This Technics RS-AZ7 is a stereo cassette deck with Dolby B/C and HX-Pro noise reduction. The main features of the Technics RS-AZ7 are: 3 heads and off-tape monitoring, digital linear tape counter with 4 digits and memory stop, automatic tape type selection and capable of handling normal, chrome and metal tapes, belt driven single-capstan transport. Typical front loading cassette deck with the cassette compartiment located on the center of the deck. Tape loading/unloading is operated motorized and the cassette needs to be placed with the side to be played facing forward in the cassette well. Level meters used on the RS-AZ7 are generic digital peak reading meters. Full-logic transport controls used on the RS-AZ7 let it respond to the slightest finger contact for fast and effortless transport function selection. To ensure the best response from the wide variety of tapes available adjustment of, bias, equalization and sensitivity, to optimum levels can be performed prior to recording. Dolby C-type used in the RS-AZ7 provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. The Dolby HX PRO system provides precise bias control during recording to reduce distortion and improve linearity in the high-frequency range, the result is recorded sound that is highly faithful to the original. The 19kHz multiplex pilot slgnal present in FM stereo broadcasts can cause false triggering of the noise reduction system. The switchable MPX filter of the RS-AZ7 filters out the pilot signal, and assuring proper Dolby processing of FM stereo programs. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. All main transport commands can be issued remotely with a wireless remote control. Daten Allgemein Hersteller:Technics Modell: RS-AZ 7 Typ: Einzel Baujahre: 1996-2001 Hergestellt in: Japan Farbe: Braun-Anthrazit - Schatten von Schwarz (Technics - Farbe) Fernbedienung: Nein, aber Sensor eingebaut Leistungsaufnahme: Abmessungen: 430 x 125 x 290 mm Anschlüsse Anzahl der Eingänge: 2 Cinch (RCA) Stereo Sensor für Steuerungsbefehle per Fernbedienung Anzahl der Ausgänge: 2 Cinch (RCA) Stereo Kopfhörerausgang, 6,3 mm (regelbar) Technische Daten Tonköpfe: 3 Motoren: 2 Gleichlaufschwankungen: 0,07% (WRMS) Bandarten: Frequenzgang: Normal: 30 Hz ~ 17 kHz, +/- 3dB ; 20 Hz ~ 18 kHz (DIN) CrO2: 30 Hz ~ 18 kHz, +/- 3dB ; 20 Hz ~ 19 kHz (DIN) Metal: 30 Hz ~ 23 kHz, +/- 3dB ; 20 Hz ~ 24 kHz (DIN) Klirrfaktor: Signalrauschabstand: (Signalpegel = Vollaussteuerung; CrO2-Band) mit Dolby C Rauschunterdrückung: 78 DB; mit Dolby B Rauschunterdrückung: 71 DB; ohne Rauschunterdrückung: 62 DB; Auto-Reverse: Nein Titelsuchlauf: Ja, TPS Dolby: Dolby B, C, HX Pro MPX-Filter: Ja, zuschaltbar Fader: Nein Pitch-Kontrolle: Nein CD-Synchro-Aufnahme: Nein Besondere Ausstattungen Technics Class-AA - Gerät Linear Magnet-Field Class-AA-Schaltung in der Aufnahmeelektronik Bandeinmessung (Advanced ATC) Vibrationsdämpfender THCB-Gehäuseboden 3-Kopf-System mit Dünnfilmkopf (Amorphous Z) Automatische Wahl von Vor- und Hinterbandkontrolle (Monitorschaltung)2-Motorenlaufwerk mit Logiksteuerung Schnelles Umspulen (ca. 35 Sek. bei C-60-Kassetten) Laufwerk mit Logiksteuerung und 2 Motoren motorisiertes Kassettenfach Direktwiedergabeteste (PLAY DIRECT) Fernbedienbar (über Technics-Systemfernbedienung) Zuschaltbarer MPX-Filter Lineares elektronisches Bandzählwerk mit Echtzeitanzeige Titelsuchlauf (TPS) Automatische Bandsorteneinstellung Aussteuerungsregler, separater Balanceregler Kopfhöreranschluß mit Lautstärkeregelung Timer-Funktion (Zeituhr zuschaltbar) präziser, fester Sitz der Kassette durch motorische Kontrolle

Specifications Type: 3-head, single compact cassette deck, Linear Magnetic Field, Class AA Track System: 4-track, 2-channel stereo Tape Speed: 4.8 cm/s Heads: 1 x combination record/playback, 1 x erase Motor: 1 x reel, 1 x capstan Tape Type: type I, CrO2, Metal Noise Reduction: B, C Headroom Extension: HX Pro Frequency Response: 20Hz to 23kHz (Metal tape) Signal to Noise Ratio: 78dB (dolby C) Wow and Flutter: 0.07% Input: 100mV (line) Output: 0.5V (line) Dimensions: 430 x 125 x 290mm This Technics RS-AZ7 is a stereo cassette deck with Dolby B/C and HX-Pro noise reduction. The main features of the Technics RS-AZ7 are: 3 heads and off-tape monitoring, digital linear tape counter with 4 digits and memory stop, automatic tape type selection and capable of handling normal, chrome and metal tapes, belt driven single-capstan transport. Typical front loading cassette deck with the cassette compartiment located on the center of the deck. Tape loading/unloading is operated motorized and the cassette needs to be placed with the side to be played facing forward in the cassette well. Level meters used on the RS-AZ7 are generic digital peak reading meters. Full-logic transport controls used on the RS-AZ7 let it respond to the slightest finger contact for fast and effortless transport function selection. To ensure the best response from the wide variety of tapes available adjustment of, bias, equalization and sensitivity, to optimum levels can be performed prior to recording. Dolby C-type used in the RS-AZ7 provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. The Dolby HX PRO system provides precise bias control during recording to reduce distortion and improve linearity in the high-frequency range, the result is recorded sound that is highly faithful to the original. The 19kHz multiplex pilot slgnal present in FM stereo broadcasts can cause false triggering of the noise reduction system. The switchable MPX filter of the RS-AZ7 filters out the pilot signal, and assuring proper Dolby processing of FM stereo programs. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. All main transport commands can be issued remotely with a wireless remote control. Daten Allgemein Hersteller:Technics Modell: RS-AZ 7 Typ: Einzel Baujahre: 1996-2001 Hergestellt in: Japan Farbe: Braun-Anthrazit - Schatten von Schwarz (Technics - Farbe) Fernbedienung: Nein, aber Sensor eingebaut Leistungsaufnahme: Abmessungen: 430 x 125 x 290 mm Anschlüsse Anzahl der Eingänge: 2 Cinch (RCA) Stereo Sensor für Steuerungsbefehle per Fernbedienung Anzahl der Ausgänge: 2 Cinch (RCA) Stereo Kopfhörerausgang, 6,3 mm (regelbar) Technische Daten Tonköpfe: 3 Motoren: 2 Gleichlaufschwankungen: 0,07% (WRMS) Bandarten: Frequenzgang: Normal: 30 Hz ~ 17 kHz, +/- 3dB ; 20 Hz ~ 18 kHz (DIN) CrO2: 30 Hz ~ 18 kHz, +/- 3dB ; 20 Hz ~ 19 kHz (DIN) Metal: 30 Hz ~ 23 kHz, +/- 3dB ; 20 Hz ~ 24 kHz (DIN) Klirrfaktor: Signalrauschabstand: (Signalpegel = Vollaussteuerung; CrO2-Band) mit Dolby C Rauschunterdrückung: 78 DB; mit Dolby B Rauschunterdrückung: 71 DB; ohne Rauschunterdrückung: 62 DB; Auto-Reverse: Nein Titelsuchlauf: Ja, TPS Dolby: Dolby B, C, HX Pro MPX-Filter: Ja, zuschaltbar Fader: Nein Pitch-Kontrolle: Nein CD-Synchro-Aufnahme: Nein Besondere Ausstattungen Technics Class-AA - Gerät Linear Magnet-Field Class-AA-Schaltung in der Aufnahmeelektronik Bandeinmessung (Advanced ATC) Vibrationsdämpfender THCB-Gehäuseboden 3-Kopf-System mit Dünnfilmkopf (Amorphous Z) Automatische Wahl von Vor- und Hinterbandkontrolle (Monitorschaltung)2-Motorenlaufwerk mit Logiksteuerung Schnelles Umspulen (ca. 35 Sek. bei C-60-Kassetten) Laufwerk mit Logiksteuerung und 2 Motoren motorisiertes Kassettenfach Direktwiedergabeteste (PLAY DIRECT) Fernbedienbar (über Technics-Systemfernbedienung) Zuschaltbarer MPX-Filter Lineares elektronisches Bandzählwerk mit Echtzeitanzeige Titelsuchlauf (TPS) Automatische Bandsorteneinstellung Aussteuerungsregler, separater Balanceregler Kopfhöreranschluß mit Lautstärkeregelung Timer-Funktion (Zeituhr zuschaltbar) präziser, fester Sitz der Kassette durch motorische Kontrolle

Specifications Type: 3-head, single compact cassette deck, Linear Magnetic Field, Class AATrack System: 4-track, 2-channel stereo Tape Speed: 4.8 cm/s Heads: 1 x combination record/playback, 1 x erase Motor: 1 x reel, 1 x capstan Tape Type: type I, CrO2, Metal Noise Reduction: B, C Headroom Extension: HX Pro Frequency Response: 20Hz to 23kHz (Metal tape) Signal to Noise Ratio: 78dB (dolby C) Wow and Flutter: 0.07% Input: 100mV (line) Output: 0.5V (line) Dimensions: 430 x 125 x 290mm This Technics RS-AZ7 is a stereo cassette deck with Dolby B/C and HX-Pro noise reduction. The main features of the Technics RS-AZ7 are: 3 heads and off-tape monitoring, digital linear tape counter with 4 digits and memory stop, automatic tape type selection and capable of handling normal, chrome and metal tapes, belt driven single-capstan transport. Typical front loading cassette deck with the cassette compartiment located on the center of the deck. Tape loading/unloading is operated motorized and the cassette needs to be placed with the side to be played facing forward in the cassette well. Level meters used on the RS-AZ7 are generic digital peak reading meters. Full-logic transport controls used on the RS-AZ7 let it respond to the slightest finger contact for fast and effortless transport function selection. To ensure the best response from the wide variety of tapes available adjustment of, bias, equalization and sensitivity, to optimum levels can be performed prior to recording. Dolby C-type used in the RS-AZ7 provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. The Dolby HX PRO system provides precise bias control during recording to reduce distortion and improve linearity in the high-frequency range, the result is recorded sound that is highly faithful to the original. The 19kHz multiplex pilot slgnal present in FM stereo broadcasts can cause false triggering of the noise reduction system. The switchable MPX filter of the RS-AZ7 filters out the pilot signal, and assuring proper Dolby processing of FM stereo programs. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. All main transport commands can be issued remotely with a wireless remote control.

Specifications Type: 3-head, single compact cassette deck, Linear Magnetic Field, Class AA Track System: 4-track, 2-channel stereo Tape Speed: 4.8 cm/s Heads: 1 x combination record/playback, 1 x erase Motor: 1 x reel, 1 x capstan Tape Type: type I, CrO2, Metal Noise Reduction: B, C Headroom Extension: HX Pro Frequency Response: 20Hz to 23kHz (Metal tape) Signal to Noise Ratio: 78dB (dolby C) Wow and Flutter: 0.07% Input: 100mV (line) Output: 0.5V (line) Dimensions: 430 x 125 x 290mm This Technics RS-AZ7 is a stereo cassette deck with Dolby B/C and HX-Pro noise reduction. The main features of the Technics RS-AZ7 are: 3 heads and off-tape monitoring, digital linear tape counter with 4 digits and memory stop, automatic tape type selection and capable of handling normal, chrome and metal tapes, belt driven single-capstan transport. Typical front loading cassette deck with the cassette compartiment located on the center of the deck. Tape loading/unloading is operated motorized and the cassette needs to be placed with the side to be played facing forward in the cassette well. Level meters used on the RS-AZ7 are generic digital peak reading meters. Full-logic transport controls used on the RS-AZ7 let it respond to the slightest finger contact for fast and effortless transport function selection. To ensure the best response from the wide variety of tapes available adjustment of, bias, equalization and sensitivity, to optimum levels can be performed prior to recording. Dolby C-type used in the RS-AZ7 provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. The Dolby HX PRO system provides precise bias control during recording to reduce distortion and improve linearity in the high-frequency range, the result is recorded sound that is highly faithful to the original. The 19kHz multiplex pilot slgnal present in FM stereo broadcasts can cause false triggering of the noise reduction system. The switchable MPX filter of the RS-AZ7 filters out the pilot signal, and assuring proper Dolby processing of FM stereo programs. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. All main transport commands can be issued remotely with a wireless remote control. Daten Allgemein Hersteller:Technics Modell: RS-AZ 7 Typ: Einzel Baujahre: 1996-2001 Hergestellt in: Japan Farbe: Braun-Anthrazit - Schatten von Schwarz (Technics - Farbe) Fernbedienung: Nein, aber Sensor eingebaut Leistungsaufnahme: Abmessungen: 430 x 125 x 290 mm Anschlüsse Anzahl der Eingänge: 2 Cinch (RCA) Stereo Sensor für Steuerungsbefehle per Fernbedienung Anzahl der Ausgänge: 2 Cinch (RCA) Stereo Kopfhörerausgang, 6,3 mm (regelbar) Technische Daten Tonköpfe: 3 Motoren: 2 Gleichlaufschwankungen: 0,07% (WRMS) Bandarten: Frequenzgang: Normal: 30 Hz ~ 17 kHz, +/- 3dB ; 20 Hz ~ 18 kHz (DIN) CrO2: 30 Hz ~ 18 kHz, +/- 3dB ; 20 Hz ~ 19 kHz (DIN) Metal: 30 Hz ~ 23 kHz, +/- 3dB ; 20 Hz ~ 24 kHz (DIN) Klirrfaktor: Signalrauschabstand: (Signalpegel = Vollaussteuerung; CrO2-Band) mit Dolby C Rauschunterdrückung: 78 DB; mit Dolby B Rauschunterdrückung: 71 DB; ohne Rauschunterdrückung: 62 DB; Auto-Reverse: Nein Titelsuchlauf: Ja, TPS Dolby: Dolby B, C, HX Pro MPX-Filter: Ja, zuschaltbar Fader: Nein Pitch-Kontrolle: Nein CD-Synchro-Aufnahme: Nein Besondere Ausstattungen Technics Class-AA - Gerät Linear Magnet-Field Class-AA-Schaltung in der Aufnahmeelektronik Bandeinmessung (Advanced ATC) Vibrationsdämpfender THCB-Gehäuseboden 3-Kopf-System mit Dünnfilmkopf (Amorphous Z) Automatische Wahl von Vor- und Hinterbandkontrolle (Monitorschaltung)2-Motorenlaufwerk mit Logiksteuerung Schnelles Umspulen (ca. 35 Sek. bei C-60-Kassetten) Laufwerk mit Logiksteuerung und 2 Motoren motorisiertes Kassettenfach Direktwiedergabeteste (PLAY DIRECT) Fernbedienbar (über Technics-Systemfernbedienung) Zuschaltbarer MPX-Filter Lineares elektronisches Bandzählwerk mit Echtzeitanzeige Titelsuchlauf (TPS) Automatische Bandsorteneinstellung Aussteuerungsregler, separater Balanceregler Kopfhöreranschluß mit Lautstärkeregelung Timer-Funktion (Zeituhr zuschaltbar) präziser, fester Sitz der Kassette durch motorische Kontrolle