REVISED, Due to the number of shipping requests, the turntable is now assembled and Ready to Ship. This Transcriptor Skeleton Turntable is a must-have for any home audio enthusiast. With its sleek silver design, this record player is sure to add a touch of elegance to any room. The amplifier feature provides high-quality sound, perfect for listening to your favorite vinyl records. The brand, Transcriptor, is known for their high-quality audio equipment. This model, Skeleton, is no exception. It is perfect for those who are looking for a reliable and stylish turntable. Whether youre a seasoned collector or just starting out, this record player is a great addition to any home audio setup. Sold As-Is, non-working but the motor turns the platter, when plugged in and switched on. Power needs to be rewired. Includes second broken platter stage as well as replacement Vestigial Tone Arm. Sold as a set, will not break up. Prefer local pickup as shipping will likely break glass cabinet. On Aug-03-24 at 11:08:08 PDT, seller added the following information: Transcriptors Vestigal Tonearm includedOn Aug-09-24 at 08:18:06 PDT, seller added the following information: Thats disassembled!

This Transcriptor Skeleton Turntable is a must-have for any home audio enthusiast. With its sleek silver design, this record player is sure to add a touch of elegance to any room. The amplifier feature provides high-quality sound, perfect for listening to your favorite vinyl records. The brand, Transcriptor, is known for their high-quality audio equipment. This model, Skeleton, is no exception. It is perfect for those who are looking for a reliable and stylish turntable. Whether youre a seasoned collector or just starting out, this record player is a great addition to any home audio setup. Sold As-Is, non-working but the motor turns the platter, when plugged in and switched on. Power needs to be rewired. Includes second broken platter stage as well as replacement Vestigial Tone Arm. Sold as a set, will not break up. Prefer local pickup as shipping will likely break glass cabinet.

LEGENDARY TRANSCRIPTOR SKELETON ALL GLASS TURNTABLE with Vestigial tonearm. Unit is in nice condition and working perfectly. In my opinion It is more a piece of art than an audiophile turntable. The unit is perfectly working and sound fabulous. The audio technica cartridge have a brand new stylus. All glass parts are in perfect shape, the back of the cover has a small chip hardly noticeable, please check pictures... This is a TRUE COLLECTOR PIECE... I can ship but You will have a puzzle to do on arrival... so please be aware. I will deliver in a 1000km Radius if buyer pay gas expenses. Due of age UNIT IS SOLD AS FOUND CONDITION, NO RETURN OR REFUND IN ANY WAY. Units will be packed with extreme care. I will pack this for war, I know how to make it smooth and secure. This unit will be professionally packaged secure travel, I know how to pack them, no worry.LOOK AND SUPERSIZE EACH PICTURES TO SEE THE CONDITION !!!Winner pay actual shipping cost plus packing fees, About 175$ for USA, 80$ for QC & ON, around 395$ WORLDWIDE via EMS AIRMAIL.PICKUP IS ALLOWED BUT I SHIP ANYWHERE, WORLDWIDE... Please ask for rates. ITEM WILL BE PROFESSIONALY PACKED TO SURVIVE ON ANY TRIP!!! I charge real price paid, Im not in the business of making on money on shipping... I DO AWESOME BLASTPROOF PACKAGING... CHECK MY FEEDBACKS...

LEGENDARY TRANSCRIPTOR SKELETON ALL GLASS TURNTABLE with Vestigial tonearm. Unit is in nice condition and working. In my opinion It is more a piece of art than an audiophile turntable. When powered on it need little help to begin to spin but goes very fine when it get his speed, maybe an ajustement. The audio technica cartridge have a brand new stylus. All glass parts are in perfect shape, the back of the cover has a small chip hardly noticeable, please check pictures... This is a TRUE COLLECTOR PIECE... I can ship but You will have a puzzle to do on arrival... so please be aware. I will deliver in a 1000km Radius if buyer pay gas expenses. Due of age UNIT IS SOLD AS FOUND CONDITION, NO RETURN OR REFUND IN ANY WAY. Units will be packed with extreme care. I will pack this for war, I know how to make it smooth and secure. This unit will be professionally packaged secure travel, I know how to pack them, no worry.LOOK AND SUPERSIZE EACH PICTURES TO SEE THE CONDITION !!!Winner pay actual shipping cost plus packing fees, About 175$ for USA, 80$ for QC & ON, around 395$ WORLDWIDE via EMS AIRMAIL.PICKUP IS ALLOWED BUT I SHIP ANYWHERE, WORLDWIDE... Please ask for rates. ITEM WILL BE PROFESSIONALY PACKED TO SURVIVE ON ANY TRIP!!! I charge real price paid, Im not in the business of making on money on shipping... I DO AWESOME BLASTPROOF PACKAGING... CHECK MY FEEDBACKS...

JA Michel transcriptor glass skeleton turntable tonearm. In good working condition no needle on the cartridge .

TRANSCRIPTOR SKELETON TURNTABLE PLATTER BEARING  THIS BEARING IS ONLY FOR THIS PARTICULAR MODEL TRANSCRIPTOR! I WILL NOT PROVIDE MEASUREMENTS BECAUSE THEY MAY NOT BE ACCURATE AND I DON’T RECOMMEND USING IT WITH DIFFERENT MODEL OR DIFFERENT BRAND! USED, IN GOOD CONDITION TAKEN FROM A WORKING UNIT SELL AS IS

I have altered this lot to a straight auction with no reserve for this stunning Transcriptor Skeleton Turntable with MIDAS Speed Control.This beautiful turntable has been sympathetically converted to DC speed control with True Point Audios highly specd MIDAS two speed control unit which sell for £895, it also includes DC motor, all neatly fitted by True Point Audio. Also included is a copy of the manual, and an acrylic armboard for an SME 3009 tonearm (tonearm not included). I do not want to ship this because there is a lot of glass, so Im afraid it is buyer collect.

As always, I welcome International buyers. I offer eBays International Shipping on this item. Original tempered glass side for at least one model of the 1970s Transcriptors Skeleton Turntable. Cosmetics are excellent overall with just a few marks. Comes as shown in the pictures below. Be sure this is the size you need, there were at least 3 different sized glass side pieces used in the cases. Side glass plate measures 16 1/8 x 6 1/8 x 3/8 thick and weighs 1 lb., 6 oz. Weight of the packed box will be 4 lb. and will measure 20 x 10 x 3. Sold as-is, not working, for parts and repair, no returns. The pictures below are of the turntable part I am selling. Please excuse the ceiling fan images in the glass, they are unavoidable. Notice the Triplex stamp and 2 dimples on both sides near one edge of the panel, these are from the tool that holds the glass as it is toughened/hardened. All pieces of toughened glass made for Transcriptors have these 2 dimples. Very few have the Triplex stamp. Please e-mail any questions you might have before bidding. Shipping quotes worldwide include insurance and packing materials. Please excuse the ceiling fan images in the glass, they are unavoidable. Notice the 2 dimples, these are from the tool that holds the glass as it is toughened/hardened. All pieces of toughened glass made for Transcriptors have these 2 dimples. Very few have the Triplex stamp.

As always, I welcome International buyers. I offer eBays International Shipping on this item. Original tempered glass side for at least one model of the 1970s Transcriptors Skeleton Turntable. Cosmetics are excellent overall with just a few marks. Comes as shown in the pictures below. Be sure this is the size you need, there were at least 3 different sized glass side pieces used in the cases. Side glass plate measures 17 1/8 x 6 1/16 x 3/8 thick and weighs 1 lb., 7 oz. Weight of the packed box will be 4 lb. and will measure 22 x 10 x 3. Sold as-is, not working, for parts and repair, no returns. The pictures below are of the turntable part I am selling. Please excuse the ceiling fan images in the glass, they are unavoidable. Notice the Triplex sticker and stamp and 2 dimples on both sides near one edge of the panel, these are from the tool that holds the glass as it is toughened/hardened. All pieces of toughened glass made for Transcriptors have these 2 dimples. Very few have the Triplex stamp and only unused pieces have the stickers still on. Please e-mail any questions you might have before bidding. Shipping quotes worldwide include insurance and packing materials. Please excuse the ceiling fan images in the glass, they are unavoidable. Notice the Triplex sticker and stamp and 2 dimples on both sides near one edge of the panel, these are from the tool that holds the glass as it is toughened/hardened. All pieces of toughened glass made for Transcriptors have these 2 dimples. Very few have the Triplex stamp and only unused pieces have the stickers still on.

As always, I welcome International buyers. I offer Global Shipping on this item. One later set of 2 used hinge blocks for a 1970s Transcriptors Skeleton turntable. These are the later type that use set screws that hold the blocks to the glass lid. One block has the screws, the other does not. Two screws will need to be found. Cosmetics are very good overall, there are some very minor scratches here and there, see photos below. The hinge blocks measures 5 x 3/4 x 3/4 and weigh 3.3 oz. each. Weight of the packed box will be 15 oz. Sold as-is, not working, for parts and repair, no returns. The pictures below are of the turntable part I am selling. Please e-mail any questions you might have before bidding. Packing materials, shipping and insurance at cost. Shipping quotes worldwide include insurance and packing materials. Listing includes the 2 hinge blocks as shown in pictures below.

As always, I welcome International buyers. I offer Global Shipping and International Standard Delivery on this item. One stay rod spring and housing for a 1970s Transcriptors Skeleton turntable. Cosmetics are excellent and appear unused, new old stock. Spring measures just under 1/2 in diameter. This spring does not fit in the hole in every stay rod housing Transcritors made. This is why I am including the housing it does fit. There are no returns for any reasons. Sold as-is, not working, for parts and repair, no returns. The pictures below are of the turntable parts I am selling. Please e-mail any questions you might have before bidding. Packing materials, shipping and insurance at cost. Shipping quotes worldwide include insurance and packing materials. The spring and housing I am offering. This spring and housing goes with a stay rod assembly as shown in pictures below. None of these parts are included in the listing.

As always, I welcome International buyers. I offer Global and International Standard Shipping on this item. This listing is for 1 used spring housing leg for a 1970s Transcriptors Skeleton turntable Spyder support. It is #3 of the 4 types shown in the last group of pictures below The one you will receive is shown in the first 4 photos below. It measures 1 1/2” diameter, 2 1/2” tall, 3 1/2 to the top of the spring collar and it weighs 3.7 oz. Cosmetics are very good showing only minor wear/scratches. Transcriptors made a several different type legs, be sure to compare the measurements and photos below for the one you want/need, there are no returns. I have only 3 of this type. Packed box will weigh 15 oz. Sold as-is, not working, for parts and repair, no returns. The pictures below are of the turntable part I am selling. Please e-mail any questions you might have before bidding. Packing materials, shipping and insurance at cost. Shipping quotes worldwide include insurance and packing materials. This listing is for the spring housing leg shown only in the next 4 photos. It measures 1 1/2” diameter, 2 1/2” tall, 3 1/2 to the top of the spring collar and it weighs 3.7 oz. Same view rotated 180 degrees. Same view rotated 180 degrees.. Be sure of the leg you need, there are no returns. I have 4 different types as seen below. Legs measurement are from the far left, #1 to the far right, #4, they are in the same order in all 6 photos. Measurements do not include the threaded shaft on the bottom. #1) 1 1/2” diameter, 2 1/2” tall, 3 5/8 to the top of the spring collar and weighs 3.9 oz. #2) 1 1/2” diameter, 2 1/2” tall, 4 to the top of the spring collar and weighs 4.2 oz. #3) 1 1/2” diameter, 2 1/2” tall, 3 1/2 to the top of the sprig collar and weighs 3.7 oz. #4) 1 1/2” diameter, 2 1/2” tall, 3 1/4 to the top of the spring collar and weighs 3.3 oz. Notice it does not have a hole drilled in to the cylinder as all the other types do.

As always, I welcome International buyers. I offer Global and International Standard Shipping on this item. One lot of 3 unused aluminum motor board caps/nuts/retainers for 1970s Transcriptors Skeleton turntable. Cosmetics are excellent plus. This listing is for one group of the 3 caps shown below. Transcriptors made 3 different sets of motor board caps/nuts/retainers for their Skeleton turntables over the years. I have only 1 of the 3 types they made that may be a match to your table. Sizes/features 3/8 diameter flat top, between 5/16 - 3/8 tall, smooth finish They all have the same thread size. Sold as-is, not working, for parts and repair, no returns. The pictures below are of the turntable parts I am selling. Please e-mail any questions you might have before bidding. Shipping quotes worldwide include insurance and packing materials. As always International Bidders are welcome to participate. Sizes/features 3/8 diameter flat top, between 5/16 - 3/8 tall, smooth finish They all have the same thread size. There are now 12 sets of 3 left, this bag is no longer this full. If you need them you might want to order as soon as possible before none are available.

As always, I welcome International buyers. I offer Global an International Standard Shipping on this item. This listing is for 1 used spring housing leg for a 1970s Transcriptors Skeleton turntable Spyder support. It is #2 of the 4 types shown in the last group of pictures below The one you will receive is shown in the first 4 photos below. It measures 1 1/2” diameter, 2 1/2” tall, 4 to the top of the spring collar and it weighs 4.2 oz. Cosmetics are very good showing only minor wear/scratches. Transcriptors made a several different type legs, be sure to compare the measurements and photos below for the one you want/need, there are no returns. I have only 8 of this type. Packed box will weigh 15 oz. Sold as-is, not working, for parts and repair, no returns. The pictures below are of the turntable part I am selling. Please e-mail any questions you might have before bidding. Packing materials, shipping and insurance at cost. Shipping quotes worldwide include insurance and packing materials. This listing is for the spring housing leg shown only in the next 4 photos. It measures 1 1/2” diameter, 2 1/2” tall, 4 to the top of the spring collar and it weighs 4.2 oz. Same view rotated 180 degrees. Same view rotated 180 degrees.. Be sure of the leg you need, there are no returns. I have 4 different types as seen below. Legs measurement are from the far left, #1 to the far right, #4, they are in the same order in all 6 photos. Measurements do not include the threaded shaft on the bottom. #1) 1 1/2” diameter, 2 1/2” tall, 3 5/8 to the top of the spring collar and weighs 3.9 oz. #2) 1 1/2” diameter, 2 1/2” tall, 4 to the top of the spring collar and weighs 4.2 oz. #3) 1 1/2” diameter, 2 1/2” tall, 3 1/2 to the top of the sprig collar and weighs 3.7 oz. #4) 1 1/2” diameter, 2 1/2” tall, 3 1/4 to the top of the spring collar and weighs 3.3 oz. Notice it does not have a hole drilled in to the cylinder as all the other types do.

As always, I welcome International buyers. I offer Global Shipping on this item. Set of 3 used spring housing legs with additional centering springs for the earliest 1970s Transcriptors Skeleton turntables. Cosmetics are very good showing mostly minor wear from use/storage. Transcriptors made a few different type legs, be sure to compare the measurements and photos below, there are no returns. They come as shown and measure 1 1/2” diameter, 2 1/2” tall, 3 1/2 to the top of the spring collar and weigh 3.8 oz. each. The total weight of all 3 is 13 oz. Packed box will weigh 3 lb. Sold as-is, not working, for parts and repair, no returns. The pictures below are of the turntable parts I am selling. Please e-mail any questions you might have before bidding. Packing materials, shipping and insurance at cost. Shipping quotes worldwide include insurance and packing materials. Legs measure 1 1/2” diameter, 2 1/2” tall, 3 1/2 to the top of the spring collar and weigh 3.8 oz. each. The total weight of all 3 is 13 oz.

As always, I welcome International buyers. I offer Global an International Standard Shipping on this item. This listing is for 1 used spring housing leg for a 1970s Transcriptors Skeleton turntable Spyder support. It is #1 of the 4 types shown in the last group of pictures below The one you will receive is shown in the first 4 photos below. It measures 1 1/2” diameter, 2 1/2” tall, 3 5/8 to the top of the spring collar and it weighs 3.9 oz. Cosmetics are very good showing only minor wear/scratches. Transcriptors made a several different type legs, be sure to compare the measurements and photos below for the one you want/need, there are no returns. I have only 7 of this type. Packed box will weigh 15 oz. Sold as-is, not working, for parts and repair, no returns. The pictures below are of the turntable part I am selling. Please e-mail any questions you might have before bidding. Packing materials, shipping and insurance at cost. Shipping quotes worldwide include insurance and packing materials. This listing is for the spring housing leg shown only in the next 4 photos. It measures 1 1/2” diameter, 2 1/2” tall, 3 5/8 to the top of the spring collar and it weighs 3.9 oz. Same view rotated 180 degrees. Same view rotated 180 degrees.. Be sure of the leg you need, there are no returns. I have 4 different types as seen below. Legs measurement are from the far left, #1 to the far right, #4, they are in the same order in all 6 photos. Measurements do not include the threaded shaft on the bottom. #1) 1 1/2” diameter, 2 1/2” tall, 3 5/8 to the top of the spring collar and weighs 3.9 oz. #2) 1 1/2” diameter, 2 1/2” tall, 4 to the top of the spring collar and weighs 4.2 oz. #3) 1 1/2” diameter, 2 1/2” tall, 3 1/2 to the top of the sprig collar and weighs 3.7 oz. #4) 1 1/2” diameter, 2 1/2” tall, 3 1/4 to the top of the spring collar and weighs 3.3 oz. Notice it does not have a hole drilled in to the cylinder as all the other types do.

International Buyers: I am offering eBay’s Global Shipping on this listing. This listing is for 1 vintage 1970s Transcriptors 60 Hz belt pulley for Skeleton and Saturn turntable used in the USA and Canada. etc. These turntables will work on both 110 and 220 voltages but use different motor/belt pulleys to run at the correct speed. The 60 HZ pulley is 3/4 in diameter at the widest. You must chose 1 from the 3 types below and ask for type 1, 2 or 3 when you make payment or through eBay email. U.S. models run on 110 volts, 60 Hz. If you bought a Skeleton or Saturn that was used in the UK or Europe and want to use it in the U.S. or Canada you must move the AC connector from 220 volts to 110 volts and replace the 50 Hz belt pulley with one of the 60 Hz ones shown below. Comes as shown, you will have to reuse the screw and adapter that is on the motor shaft or press type 3 directly on to the shaft. These are unused, new old stock items from the 1970s, not reproductions. I bought these parts directly from a Transcriptors distributor in Milwaukee, WI many years ago. As always, the pictures below are of the actual parts I am selling. Please e-mail any questions you might have before bidding. Shipping quotes in the U.S. and Global Shipping all come with insurance. The 60 Hz. pulleys are for these two types of turntables. You must chose 1 from the 3 types below and ask for type 1, 2 or 3 when you make payment or through eBay email. #1 is on the left, #2 in the center and #3 is on the right in the 6 photos below. See close-ups of each type below these pictures. Type #1 Type #2 Type #3

As always, I welcome International buyers. I offer Global Shipping and International Standard Delivery on this item. Set of 3 used leg housings and center shafts for a 1970s Transcriptors Skeleton turntable. Cosmetics are very good showing mostly minor wear from use/storage. Transcriptors made a few different type legs, be sure to compare the measurements and photos below, there are no returns. They come as shown and measure 1 1/2” diameter, 2 1/2” tall, 3 1/4 to the top of the threaded shaft and weigh 2.5 oz. each. The total weight of all 3 is 7.5 oz. Packed box will weigh 2 lb. Sold as-is, not working, for parts and repair, no returns. The pictures below are of the turntable parts I am selling. Please e-mail any questions you might have before bidding. Packing materials, shipping and insurance at cost. Shipping quotes worldwide include insurance and packing materials. Legs measure 1 1/2” diameter, 2 1/2” tall, 3 1/4 to the top of the threaded shaft and weigh 2.5 oz. each. The total weight of all 3 is 7.5 oz.

As always, I welcome International buyers. I offer Global an International Standard Shipping on this item. This listing is for 1 used spring housing leg for a 1970s Transcriptors Skeleton turntable Spyder support. It is #4 of the 4 types shown in the last group of pictures below The one you will receive is shown in the first 5 photos below. It measures 1 1/2” diameter, 2 1/2” tall, 3 to the top of the spring collar disc, not including the height adjuster disc and threaded rod. Weighs 3.5 oz. Notice it does not have a hole drilled in to the cylinder as all the other types do. Cosmetics are very good showing only minor wear/scratches. Included in this listing is one height adjuster disc and one threaded rod. Disc measures 1” diameter at the widest, 3/4 in diameter on top and the height is 1/4. The threaded rod measures 1 1/4 long. Transcriptors made a several different type legs, be sure to compare the measurements and photos below for the one you want/need, there are no returns. I have only 2 of this type. Packed box will weigh 15 oz. Sold as-is, not working, for parts and repair, no returns. The pictures below are of the turntable part I am selling. Please e-mail any questions you might have before bidding. Packing materials, shipping and insurance at cost. Shipping quotes worldwide include insurance and packing materials. The leg assembly you will receive is shown in the first 5 photos below. It measures 1 1/2” diameter, 2 1/2” tall, 3 to the top of the spring collar disc, not including the height adjuster disc and threaded rod. Weighs 3.5 oz. Notice it does not have a hole drilled in to the cylinder as all the other types do. Be sure of the leg you need, there are no returns. I have 4 different types as seen below. Legs measurement are from the far left, #1 to the far right, #4, they are in the same order in all 6 photos. Measurements do not include the threaded shaft on the bottom. #1) 1 1/2” diameter, 2 1/2” tall, 3 5/8 to the top of the spring collar and weighs 3.9 oz. #2) 1 1/2” diameter, 2 1/2” tall, 4 to the top of the spring collar and weighs 4.2 oz. #3) 1 1/2” diameter, 2 1/2” tall, 3 1/2 to the top of the sprig collar and weighs 3.7 oz. #4) 1 1/2” diameter, 2 1/2” tall, 3 to the top of the spring collar and weighs 3.3 oz. Notice it does not have a hole drilled in to the cylinder as all the other types do.

As always, I welcome International buyers. I offer Global Shipping and International Standard Delivery on this item. Choice of 1 Stay Rod Spring Housing for a 1970s Transcriptors Skeleton turntable. Cosmetics are excellent overall, there are some very minor scratches. From left to right in every photo below they measures 9/16, 1/2, 1/2 tall, all are 5/8 in diameter and all weighs .1 oz. All 3 are different, please look over the photos below and be sure to note in the payment or email which one you want. There are no returns for any reasons. Left to right in every photo below, #1 on the left, #2 in the center and #3 on the right. Weight of the packed box will be 12 oz. Sold as-is, not working, for parts and repair, no returns. The pictures below are of the turntable part I am selling. Please e-mail any questions you might have before bidding. Packing materials, shipping and insurance at cost. Shipping quotes worldwide include insurance and packing materials. Left to right in every photo below, #1 on the left, #2 in the center and #3 on the right. Buyer has the choice of one. These spring housings go with a stay rod assembly as shown in pictures below. None of these parts are included in the listing

As always, I welcome International buyers. I offer Global Shipping on this item. One used platter retainer nut for a 1970s Transcriptors Skeleton and the Transcriber turntable platters. Cosmetics are very good to good with scratches and dirt here and there. I now have only 3 left, 1 with coarse knurling shown in front and 2 with fine knurling shown in the rear of the pics below. Platter retainer nuts measures 1 in diameter, the height to the top of the peak is 1 and they weigh 1 oz. Packed box will weigh 12 oz. Sold as-is, not working, for parts and repair, no returns. The pictures below are of the turntable part I am selling. Please e-mail any questions you might have before bidding. Packing materials, shipping and insurance at cost. Shipping quotes worldwide include insurance and packing materials. Platter retainer nuts measures 1 in diameter, the height to the top of the peak is 1 and they weigh 1 oz.

As always, I welcome International buyers. I offer eBays International Shipping on this item. Original tempered glass side for at least one model of the 1970s Transcriptors Skeleton Turntable. Cosmetics are excellent overall with just a few marks. Comes as shown in the pictures below. Be sure this is the size you need, there were at least 3 different sized glass side pieces used in the cases. Side glass plate measures 16 1/8 x 6 1/8 x 3/8 thick and weighs 1 lb., 6 oz. Weight of the packed box will be 4 lb. and will measure 20 x 10 x 3. Sold as-is, not working, for parts and repair, no returns. The pictures below are of the turntable part I am selling. Please excuse the ceiling fan images in the glass, they are unavoidable. Notice the Triplex stamp and 2 dimples on both sides near one edge of the panel, these are from the tool that holds the glass as it is toughened/hardened. All pieces of toughened glass made for Transcriptors have these 2 dimples. Very few have the Triplex stamp. Please e-mail any questions you might have before bidding. Shipping quotes worldwide include insurance and packing materials. Please excuse the ceiling fan images in the glass, they are unavoidable. Notice the 2 dimples, these are from the tool that holds the glass as it is toughened/hardened. All pieces of toughened glass made for Transcriptors have these 2 dimples. Very few have the Triplex stamp.

As always, I welcome International buyers. I offer eBays International Shipping on this item. Original tempered glass side for at least one model of the 1970s Transcriptors Skeleton Turntable. Cosmetics are excellent overall with just a few marks. Comes as shown in the pictures below. Be sure this is the size you need, there were at least 3 different sized glass side pieces used in the cases. Side glass plate measures 17 1/8 x 6 1/16 x 3/8 thick and weighs 1 lb., 7 oz. Weight of the packed box will be 4 lb. and will measure 22 x 10 x 3. Sold as-is, not working, for parts and repair, no returns. The pictures below are of the turntable part I am selling. Please excuse the ceiling fan images in the glass, they are unavoidable. Notice the Triplex sticker and stamp and 2 dimples on both sides near one edge of the panel, these are from the tool that holds the glass as it is toughened/hardened. All pieces of toughened glass made for Transcriptors have these 2 dimples. Very few have the Triplex stamp and only unused pieces have the stickers still on. Please e-mail any questions you might have before bidding. Shipping quotes worldwide include insurance and packing materials. Please excuse the ceiling fan images in the glass, they are unavoidable. Notice the Triplex sticker and stamp and 2 dimples on both sides near one edge of the panel, these are from the tool that holds the glass as it is toughened/hardened. All pieces of toughened glass made for Transcriptors have these 2 dimples. Very few have the Triplex stamp and only unused pieces have the stickers still on.

As always, I welcome International buyers. I offer Global Shipping and International Standard Delivery on this item. Set of 3 used leg housings and center shafts for a 1970s Transcriptors Skeleton turntable. Cosmetics are very good showing mostly minor wear from use/storage. Transcriptors made a few different type legs, be sure to compare the measurements and photos below, there are no returns. They come as shown and measure 1 1/2” diameter, 2 1/2” tall, 3 1/4 to the top of the threaded shaft and weigh 2.5 oz. each. The total weight of all 3 is 7.5 oz. Packed box will weigh 2 lb. Sold as-is, not working, for parts and repair, no returns. The pictures below are of the turntable parts I am selling. Please e-mail any questions you might have before bidding. Packing materials, shipping and insurance at cost. Shipping quotes worldwide include insurance and packing materials. Legs measure 1 1/2” diameter, 2 1/2” tall, 3 1/4 to the top of the threaded shaft and weigh 2.5 oz. each. The total weight of all 3 is 7.5 oz.