As always, I welcome International buyers. I offer Global Shipping on this item. One used platter retainer nut for a 1970s Transcriptors Skeleton and the Transcriber turntable platters. Cosmetics are very good to good with scratches and dirt here and there. I now have only 3 left, 1 with coarse knurling shown in front and 2 with fine knurling shown in the rear of the pics below. Platter retainer nuts measures 1 in diameter, the height to the top of the peak is 1 and they weigh 1 oz. Packed box will weigh 12 oz. Sold as-is, not working, for parts and repair, no returns. The pictures below are of the turntable part I am selling. Please e-mail any questions you might have before bidding. Packing materials, shipping and insurance at cost. Shipping quotes worldwide include insurance and packing materials. Platter retainer nuts measures 1 in diameter, the height to the top of the peak is 1 and they weigh 1 oz.

As always, I welcome International buyers. I offer Global an International Standard Shipping on this item. This listing is for 1 used spring housing leg for a 1970s Transcriptors Skeleton turntable Spyder support. It is #1 of the 4 types shown in the last group of pictures below The one you will receive is shown in the first 4 photos below. It measures 1 1/2” diameter, 2 1/2” tall, 3 5/8 to the top of the spring collar and it weighs 3.9 oz. Cosmetics are very good showing only minor wear/scratches. Transcriptors made a several different type legs, be sure to compare the measurements and photos below for the one you want/need, there are no returns. I have only 7 of this type. Packed box will weigh 15 oz. Sold as-is, not working, for parts and repair, no returns. The pictures below are of the turntable part I am selling. Please e-mail any questions you might have before bidding. Packing materials, shipping and insurance at cost. Shipping quotes worldwide include insurance and packing materials. This listing is for the spring housing leg shown only in the next 4 photos. It measures 1 1/2” diameter, 2 1/2” tall, 3 5/8 to the top of the spring collar and it weighs 3.9 oz. Same view rotated 180 degrees. Same view rotated 180 degrees.. Be sure of the leg you need, there are no returns. I have 4 different types as seen below. Legs measurement are from the far left, #1 to the far right, #4, they are in the same order in all 6 photos. Measurements do not include the threaded shaft on the bottom. #1) 1 1/2” diameter, 2 1/2” tall, 3 5/8 to the top of the spring collar and weighs 3.9 oz. #2) 1 1/2” diameter, 2 1/2” tall, 4 to the top of the spring collar and weighs 4.2 oz. #3) 1 1/2” diameter, 2 1/2” tall, 3 1/2 to the top of the sprig collar and weighs 3.7 oz. #4) 1 1/2” diameter, 2 1/2” tall, 3 1/4 to the top of the spring collar and weighs 3.3 oz. Notice it does not have a hole drilled in to the cylinder as all the other types do.

As always, I welcome International buyers. I offer Global and International Standard Shipping on this item. This listing is for 1 used spring housing leg for a 1970s Transcriptors Skeleton turntable Spyder support. It is #3 of the 4 types shown in the last group of pictures below The one you will receive is shown in the first 4 photos below. It measures 1 1/2” diameter, 2 1/2” tall, 3 1/2 to the top of the spring collar and it weighs 3.7 oz. Cosmetics are very good showing only minor wear/scratches. Transcriptors made a several different type legs, be sure to compare the measurements and photos below for the one you want/need, there are no returns. I have only 3 of this type. Packed box will weigh 15 oz. Sold as-is, not working, for parts and repair, no returns. The pictures below are of the turntable part I am selling. Please e-mail any questions you might have before bidding. Packing materials, shipping and insurance at cost. Shipping quotes worldwide include insurance and packing materials. This listing is for the spring housing leg shown only in the next 4 photos. It measures 1 1/2” diameter, 2 1/2” tall, 3 1/2 to the top of the spring collar and it weighs 3.7 oz. Same view rotated 180 degrees. Same view rotated 180 degrees.. Be sure of the leg you need, there are no returns. I have 4 different types as seen below. Legs measurement are from the far left, #1 to the far right, #4, they are in the same order in all 6 photos. Measurements do not include the threaded shaft on the bottom. #1) 1 1/2” diameter, 2 1/2” tall, 3 5/8 to the top of the spring collar and weighs 3.9 oz. #2) 1 1/2” diameter, 2 1/2” tall, 4 to the top of the spring collar and weighs 4.2 oz. #3) 1 1/2” diameter, 2 1/2” tall, 3 1/2 to the top of the sprig collar and weighs 3.7 oz. #4) 1 1/2” diameter, 2 1/2” tall, 3 1/4 to the top of the spring collar and weighs 3.3 oz. Notice it does not have a hole drilled in to the cylinder as all the other types do.

As always, I welcome International buyers. I offer Global Shipping and International Standard Delivery on this item. Choice of 1 Stay Rod Spring Housing for a 1970s Transcriptors Skeleton turntable. Cosmetics are excellent overall, there are some very minor scratches. From left to right in every photo below they measures 9/16, 1/2, 1/2 tall, all are 5/8 in diameter and all weighs .1 oz. All 3 are different, please look over the photos below and be sure to note in the payment or email which one you want. There are no returns for any reasons. Left to right in every photo below, #1 on the left, #2 in the center and #3 on the right. Weight of the packed box will be 12 oz. Sold as-is, not working, for parts and repair, no returns. The pictures below are of the turntable part I am selling. Please e-mail any questions you might have before bidding. Packing materials, shipping and insurance at cost. Shipping quotes worldwide include insurance and packing materials. Left to right in every photo below, #1 on the left, #2 in the center and #3 on the right. Buyer has the choice of one. These spring housings go with a stay rod assembly as shown in pictures below. None of these parts are included in the listing

International Buyers: I am offering eBay’s Global Shipping on this listing. This listing is for 1 vintage 1970s Transcriptors 60 Hz belt pulley for Skeleton and Saturn turntable used in the USA and Canada. etc. These turntables will work on both 110 and 220 voltages but use different motor/belt pulleys to run at the correct speed. The 60 HZ pulley is 3/4 in diameter at the widest. You must chose 1 from the 3 types below and ask for type 1, 2 or 3 when you make payment or through eBay email. U.S. models run on 110 volts, 60 Hz. If you bought a Skeleton or Saturn that was used in the UK or Europe and want to use it in the U.S. or Canada you must move the AC connector from 220 volts to 110 volts and replace the 50 Hz belt pulley with one of the 60 Hz ones shown below. Comes as shown, you will have to reuse the screw and adapter that is on the motor shaft or press type 3 directly on to the shaft. These are unused, new old stock items from the 1970s, not reproductions. I bought these parts directly from a Transcriptors distributor in Milwaukee, WI many years ago. As always, the pictures below are of the actual parts I am selling. Please e-mail any questions you might have before bidding. Shipping quotes in the U.S. and Global Shipping all come with insurance. The 60 Hz. pulleys are for these two types of turntables. You must chose 1 from the 3 types below and ask for type 1, 2 or 3 when you make payment or through eBay email. #1 is on the left, #2 in the center and #3 is on the right in the 6 photos below. See close-ups of each type below these pictures. Type #1 Type #2 Type #3

As always, I welcome International buyers. I offer Global and International Standard Shipping on this item. One lot of 3 unused aluminum motor board caps/nuts/retainers for 1970s Transcriptors Skeleton turntable. Cosmetics are excellent plus. This listing is for one group of the 3 caps shown below. Transcriptors made 3 different sets of motor board caps/nuts/retainers for their Skeleton turntables over the years. I have only 1 of the 3 types they made that may be a match to your table. Sizes/features 3/8 diameter flat top, between 5/16 - 3/8 tall, smooth finish They all have the same thread size. Sold as-is, not working, for parts and repair, no returns. The pictures below are of the turntable parts I am selling. Please e-mail any questions you might have before bidding. Shipping quotes worldwide include insurance and packing materials. As always International Bidders are welcome to participate. Sizes/features 3/8 diameter flat top, between 5/16 - 3/8 tall, smooth finish They all have the same thread size. There are now 12 sets of 3 left, this bag is no longer this full. If you need them you might want to order as soon as possible before none are available.

As always, I welcome International buyers. I offer Global Shipping and International Standard Delivery on this item. One stay rod spring and housing for a 1970s Transcriptors Skeleton turntable. Cosmetics are excellent and appear unused, new old stock. Spring measures just under 1/2 in diameter. This spring does not fit in the hole in every stay rod housing Transcritors made. This is why I am including the housing it does fit. There are no returns for any reasons. Sold as-is, not working, for parts and repair, no returns. The pictures below are of the turntable parts I am selling. Please e-mail any questions you might have before bidding. Packing materials, shipping and insurance at cost. Shipping quotes worldwide include insurance and packing materials. The spring and housing I am offering. This spring and housing goes with a stay rod assembly as shown in pictures below. None of these parts are included in the listing.

As always, I welcome International buyers. I offer Global an International Standard Shipping on this item. This listing is for 1 used spring housing leg for a 1970s Transcriptors Skeleton turntable Spyder support. It is #4 of the 4 types shown in the last group of pictures below The one you will receive is shown in the first 5 photos below. It measures 1 1/2” diameter, 2 1/2” tall, 3 to the top of the spring collar disc, not including the height adjuster disc and threaded rod. Weighs 3.5 oz. Notice it does not have a hole drilled in to the cylinder as all the other types do. Cosmetics are very good showing only minor wear/scratches. Included in this listing is one height adjuster disc and one threaded rod. Disc measures 1” diameter at the widest, 3/4 in diameter on top and the height is 1/4. The threaded rod measures 1 1/4 long. Transcriptors made a several different type legs, be sure to compare the measurements and photos below for the one you want/need, there are no returns. I have only 2 of this type. Packed box will weigh 15 oz. Sold as-is, not working, for parts and repair, no returns. The pictures below are of the turntable part I am selling. Please e-mail any questions you might have before bidding. Packing materials, shipping and insurance at cost. Shipping quotes worldwide include insurance and packing materials. The leg assembly you will receive is shown in the first 5 photos below. It measures 1 1/2” diameter, 2 1/2” tall, 3 to the top of the spring collar disc, not including the height adjuster disc and threaded rod. Weighs 3.5 oz. Notice it does not have a hole drilled in to the cylinder as all the other types do. Be sure of the leg you need, there are no returns. I have 4 different types as seen below. Legs measurement are from the far left, #1 to the far right, #4, they are in the same order in all 6 photos. Measurements do not include the threaded shaft on the bottom. #1) 1 1/2” diameter, 2 1/2” tall, 3 5/8 to the top of the spring collar and weighs 3.9 oz. #2) 1 1/2” diameter, 2 1/2” tall, 4 to the top of the spring collar and weighs 4.2 oz. #3) 1 1/2” diameter, 2 1/2” tall, 3 1/2 to the top of the sprig collar and weighs 3.7 oz. #4) 1 1/2” diameter, 2 1/2” tall, 3 to the top of the spring collar and weighs 3.3 oz. Notice it does not have a hole drilled in to the cylinder as all the other types do.