Description?OperationFor the purpose of operation confirmation, we are conducting aging for half a day to one day. Before listing this product, we have performed comprehensive maintenance and operation checks at our company. We have measured electronic components, lubricated spindle oil, and conducted cleaning and adjustments of various contacts and parts. It is now in a condition where you can use it with peace of mind. ?Turntable??In Good Working Condition?It rotates smoothly without any abnormal noise.?The speed adjustment is also smooth.?We have confirmed the stability of rotation with a stroboscope.?The start (33/45 RPM button) and stop buttons respond without any issues.?The strobe light also lights up without any bulb failure. ?This item is compatible with both 50Hz and 60Hz. All of the above operations are problem-free, and it is in good working condition. Although we conduct thorough product checks, in the unlikely event of any initial operational problems, we offer free repair or return/refund within one week after delivery, so please rest assured. In case of operational issues, please send it back to us at our expense. After receiving the returned item and confirming its condition, we will proceed with the refund. ?Product DetailsManufacturer: MICROModel: DDX-1000 ?Accessories?Power/Control Unit?Rubber Mat?Instruction Manual (Copy)?MICRO Genuine DDX Transparent Sheet?Regarding the transparent sheet, please consider it as a bonus as it may have some wear. ?Everything shown in the photos, except for our background equipment, is included. Please check carefully. ShippingWe always send the item with a tracking number. So please place an order without any concern on delivery. You can always track the delivery status.Shipping is only available to the address registered in eBay. If you want us to send another address, please change your address on eBay and then place an order.Shipping is available from Monday to Friday. Weekends are not available because freight (shipping) companies are closed.We do not mark merchandise values below value or mark items as “gifts” – Japan, US and International government regulations prohibit such behavior.If your address is in the remote areas defined by the freight (shipping) company, please pay the additional shipping fees with PayPal.About Importers ObligationImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

MICRO SEIKI DIRECT-DRIVE TURNTABLE DDX-1000 (sn 08054864) This Micro Seiki direct drive turntable spins smoothly and silently. The attached video shows that correct speeds were dialed in using the control unit and confirmed with the built in strobe light and the checked pattern on the turntable rim. No armbands are included in the listing - We have three armbands listed separately 33-1/3 and 45 rpm both hold steady. The sale includes the control unit/power supply The combined weight of the turntable is 26 pounds. The approximate dimensions are 18 x 18 x 12 and the weight will be about 30 pounds.

MICRO SEIKI ARM BOARD AX-2 (#1) ** This listing is for one armboard **PARTS OR REPAIR - ONE OF THE MOUNT BOLTS IS BROKEN OFF - SEE PICTURES ** NO RETURNS This Micro Seiki AX-2 arm board was manufactured specifically for Micro Seikis DDX-1000 and MD-1000 turntables. It is made of light weight gun metal (aka red brass), an alloy of copper, tin and zinc. Another AX-2 of ours is listed on a different ad. As you can see in the photos one of the mounting screws is broken. Its possible to re-tap the hole but this arm board is non functional as it is. The price reflects the damage. Shown in the photos for this ad are five other M.S. arm boards we recently listed in addition to this one. The Micro Seiki DDX-1000 turntable shown in the photos is not for sale on this ad, it’s only there to display the arm boards in use. That DDX-1000 turntable is listed on another of our ads though.

MICRO SEIKI ARM BOARD AX-1 (#1) This listing is for one arm board This Micro Seiki AX-1 arm board was manufactured specifically for Micro Seikis DDX-1000 and MD-1000 turntables. It is made of light weight gun metal (aka red brass), an alloy of copper, tin and zinc. A second AX-1 is listed on another of our ads. As you can see in the photos this arm board is complete and in excellent condition. Shown in the photos for this ad are five other M.S. arm boards recently listed in addition to this one. The Micro Seiki DDX-1000 turntable shown in the photos is not for sale on this ad, it’s only there to display the arm boards in use. That DDX-1000 turntable is listed on another of our ads though.

MICRO SEIKI HALTESCHEIBE für Tonarm von einem DDX-1000 für AX-1 und andere Tonarmbasen.Passt für viele Tonarme und Basen bitte einfach einmal nachlesen.Achtung ist ein original von meinem alten DDX 1000 kein Nachbau.Keine Schrauben oder sonstige Teile dabei nur die Haltescheibe habe ich beim aufräumen gefunden, den Plattenspieler habe ich leider vor langer Zeit verkauft. Versand als schneller Priobrief mit Sendungsverfolgung Sehr gerne auch kostenlose Abholung. Bitte fragen Sie und gerne sende ich noch bessere , schönere Bilder Verkauf ohne Garantie und Rücknahme Privatverkauf, daher keine Garantie oder Rücknahme. Ich gebe als Privatverkäufer weder Garantie, noch Gewährleistung, Rückgabe oder Rücktritt sind ausgeschlossen, Sämtliche Angaben, auch Herstellerangaben oder Testberichte, dienen lediglich der Artikelbeschreibung und stellen keine zugesicherten Eigenschaften dar. Fragen Sie bitte vor Abgabe eines Gebotes. Der Käufer trägt bei nicht Versichertem Versand das Verlust und das Transportrisiko. Ich bitte um Ihr Verständnis. Danke Keine Abmahnung ohne vorherigen Kontakt! Sollte der Inhalt oder die Aufmachung dieser Seiten fremde Rechte Dritter oder gesetzliche Bestimmungen verletzen, so bitte ich um eine entsprechende Nachricht ohne Kostennote. Die Beseitigung einer möglicherweise von diesen Seiten ausgehenden Schutzrecht-Verletzung durch Schutzrecht-InhaberInnen selbst darf nicht ohne meine Zustimmung stattfinden. Ich garantiere, dass die zu Recht beanstandeten Passagen unverzüglich entfernt werden, ohne dass von Ihrer Seite die Einschaltung eines Rechtsbeistandes erforderlich ist. Dennoch von Ihnen ohne vorherige Kontaktaufnahme ausgelöste Kosten werde ich vollumfänglich zurückweisen und gegebenenfalls Gegenklage wegen Verletzung vorgenannter Bestimmungen einreichen.

MICRO SEIKI ARM BOARD AX-1 (#1) This listing is for one arm board This Micro Seiki AX-1 arm board was manufactured specifically for Micro Seikis DDX-1000 and MD-1000 turntables. It is made of light weight gun metal (aka red brass), an alloy of copper, tin and zinc. A second AX-1 is listed on another of our ads. As you can see in the photos this arm board is complete and in excellent condition. Shown in the photos for this ad are five other M.S. arm boards recently listed in addition to this one. The Micro Seiki DDX-1000 turntable shown in the photos is not for sale on this ad, it’s only there to display the arm boards in use. That DDX-1000 turntable is listed on another of our ads though.

MICRO SEIKI ARM BOARD AX-2 (#2) **This sale is for One Arm Board This Micro Seiki AX-2 arm board was manufactured specifically for Micro Seikis DDX-1000 and MD-1000 turntables. It is made of light weight gun metal (aka red brass), an alloy of copper, tin and zinc. Another AX-2 of ours is listed on a different ad. As you can see in the photos this arm board is complete and in excellent condition. Shown in the photos for this ad are five other M.S. arm boards we recently listed in addition to this one. The Micro Seiki DDX-1000 turntable shown in the photos is not for sale on this ad, it’s only there to display the arm boards in use. That DDX-1000 turntable is listed on another of our ads though.

MICRO SEIKI ARM BOARD AX-1 (#2) **This listing is for one arm board This Micro Seiki AX-1 arm board was manufactured specifically for Micro Seikis DDX-1000 and MD-1000 turntables. It is made of light weight gun metal (aka red brass), an alloy of copper, tin and zinc. A second AX-1 is listed on another of our ads. As you can see in the photos this arm board is complete and in excellent condition. Shown in the photos for this ad are five other M.S. arm boards recently listed in addition to this one. The Micro Seiki DDX-1000 turntable shown in the photos is not for sale on this ad, it’s only there to display the arm boards in use. That DDX-1000 turntable is listed on another of our ads though.

MICRO SEIKI ARM BOARD AX-4 This listing is for one Arm Board This Micro Seiki AX-4 arm board was manufactured specifically for Micro Seikis DDX-1000 and MD-1000 turntables. It is made of light weight gun metal (aka red brass), an alloy of copper, tin and zinc. We have listed an exact reproduction of the original AX-4 on another ad. (The reproduction is almost triple the weight of the original part so its probably made of steel, an alloy of iron and carbon.) As you can see in the photos this arm board is complete and in excellent condition. Shown in the photos for this ad, we recently listed five other M.S. arm boards in addition to this one. The Micro Seiki DDX-1000 shown in the photos is not for sale on this ad, it’s only there to display the arm boards in use. That DDX-1000 turntable is listed on another of our ads though.

MICRO SEIKI ARM BOARD AX-2 (#1) ** This listing is for one armboard This Micro Seiki AX-2 arm board was manufactured specifically for Micro Seikis DDX-1000 and MD-1000 turntables. It is made of light weight gun metal (aka red brass), an alloy of copper, tin and zinc. Another AX-2 of ours is listed on a different ad. As you can see in the photos one of the mounting screws is broken. Its possible to re-tap the hole but this arm board is non functional as it is. The price reflects the damage. Shown in the photos for this ad are five other M.S. arm boards we recently listed in addition to this one. The Micro Seiki DDX-1000 turntable shown in the photos is not for sale on this ad, it’s only there to display the arm boards in use. That DDX-1000 turntable is listed on another of our ads though.