Turntable MICRO DDX-1000 MD-1000 Control unit included Audio Station working MICRO DDX-1000 turntable MD-1000 control unit included This player is the prototype of the DQX-1000 released in 1976. If you use all 6 types of optional mount bases, An excellent item that allows up to 3 arms from each manufacturer to be used at the same time. You can enjoy playing records while being particular about recombining the arm/shell/cartridge. Once you see the mechanical design, you will be hooked. ?Condition Each part has been polished/cleaned. Polish the arm, platter, and metal parts until they are as clean as possible to remove dirt and rust. ?There are some scratches and dullness, but There are no major scratches and it is shiny. The platter is also in good condition with a slight dullness and gloss. ?The rubber inside the insulator shows some deterioration over time, It is elastic and functions without any problems. ?It is glossy/shiny, but there are dullness and scratches. This is a used item that has been around for a number of years. Please be aware of the scratches/scratches/feelings due to age/use before bidding. ?Operation To confirm operation, we perform aging for half a day to one day. For this listing, we have carried out a comprehensive maintenance/operation check at our company. We measured electronic parts, applied spindle oil, cleaned each contact, and adjusted each part. It is in a condition that you can use it with confidence. Works well ?It rotates normally without any abnormal noise. ?Speed adjustment is also smooth. Stable rotation has also been confirmed using a stroboscope. - There is no problem with the start (33/45 rotation button)/stop button response. - The strobe also lights up without any flashing. *This item is common for 50/60Hz. There are no problems with all of the above operations, and the product is in good working order. ?Product contents Manufacturer: MICRO Model number: DDX-1000 ?Accessories ?Power supply/control unit ?Rubber mat ?Instruction manual (copy) ?MICRO DDX genuine transparent sheet The transparent sheet may be damaged, so please consider it as a bonus. Nothing except those in the photo comes with the product.All items are shown in it. Should you have any questions please feel free to contact us at anytime ! This item is 100% authentic, Japanese goods. Please be assured that we package each item carefully without causing damage.DescriptionWe will ship the card in waterproof packaging to prevent damage to the card during packaging.Please do not cancel after purchase to prevent replacement. PaymentSupports managed paymentsPlease pay within 5 days after auction is finished. About UsWe are located in Japan.Its our pleasure to make you happy by proposing our recommend item.If you have any questions or request about items, please feel free to ask us. International Buyers - Please Note:-Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.-Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying.-These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.-We do not mark merchandise values below value or mark items as - gifts - The US and International government regulations prohibit such behavior.

This is a reprint of an Advertisement from 1976! The picture is of the actual item, Mint Condition! Very rare and hard to find! A piece of Audio History! I have THOUSANDS more Ads and Reviews on my Ebay Store. Email with ANY questions, THANKS! -Search for any brand you like on the left side in my Store Search bar. I have almost every popular Audio brand! -Each Page is 8.5 by 11 -Shipping is $3 in the USA and $6 ANYWHERE else, I ship WORLDWIDE! Each additional item is only $1 more to ship! -As always, your satisfaction is GUARANTEED at Electronics Archives! If you are unhappy with any purchase, email and I will get you a resolution or a refund! -Email me with any questions, I put 10-20 new Ads and Brochures on my site EVERY DAY! THANK YOU! Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.

MICRO SEIKI ARM BOARD AX-2 (#1) ** This listing is for one armboard **PARTS OR REPAIR - ONE OF THE MOUNT BOLTS IS BROKEN OFF - SEE PICTURES ** NO RETURNS This Micro Seiki AX-2 arm board was manufactured specifically for Micro Seikis DDX-1000 and MD-1000 turntables. It is made of light weight gun metal (aka red brass), an alloy of copper, tin and zinc. Another AX-2 of ours is listed on a different ad. As you can see in the photos one of the mounting screws is broken. Its possible to re-tap the hole but this arm board is non functional as it is. The price reflects the damage. Shown in the photos for this ad are five other M.S. arm boards we recently listed in addition to this one. The Micro Seiki DDX-1000 turntable shown in the photos is not for sale on this ad, it’s only there to display the arm boards in use. That DDX-1000 turntable is listed on another of our ads though.

MICRO SEIKI ARM BOARD AX-1 (#1) This listing is for one arm board This Micro Seiki AX-1 arm board was manufactured specifically for Micro Seikis DDX-1000 and MD-1000 turntables. It is made of light weight gun metal (aka red brass), an alloy of copper, tin and zinc. A second AX-1 is listed on another of our ads. As you can see in the photos this arm board is complete and in excellent condition. Shown in the photos for this ad are five other M.S. arm boards recently listed in addition to this one. The Micro Seiki DDX-1000 turntable shown in the photos is not for sale on this ad, it’s only there to display the arm boards in use. That DDX-1000 turntable is listed on another of our ads though.

MICRO SEIKI HALTESCHEIBE für Tonarm von einem DDX-1000 für AX-1 und andere Tonarmbasen.Passt für viele Tonarme und Basen bitte einfach einmal nachlesen.Achtung ist ein original von meinem alten DDX 1000 kein Nachbau.Keine Schrauben oder sonstige Teile dabei nur die Haltescheibe habe ich beim aufräumen gefunden, den Plattenspieler habe ich leider vor langer Zeit verkauft. Versand als schneller Priobrief mit Sendungsverfolgung Sehr gerne auch kostenlose Abholung. Bitte fragen Sie und gerne sende ich noch bessere , schönere Bilder Verkauf ohne Garantie und Rücknahme Privatverkauf, daher keine Garantie oder Rücknahme. Ich gebe als Privatverkäufer weder Garantie, noch Gewährleistung, Rückgabe oder Rücktritt sind ausgeschlossen, Sämtliche Angaben, auch Herstellerangaben oder Testberichte, dienen lediglich der Artikelbeschreibung und stellen keine zugesicherten Eigenschaften dar. Fragen Sie bitte vor Abgabe eines Gebotes. Der Käufer trägt bei nicht Versichertem Versand das Verlust und das Transportrisiko. Ich bitte um Ihr Verständnis. Danke Keine Abmahnung ohne vorherigen Kontakt! Sollte der Inhalt oder die Aufmachung dieser Seiten fremde Rechte Dritter oder gesetzliche Bestimmungen verletzen, so bitte ich um eine entsprechende Nachricht ohne Kostennote. Die Beseitigung einer möglicherweise von diesen Seiten ausgehenden Schutzrecht-Verletzung durch Schutzrecht-InhaberInnen selbst darf nicht ohne meine Zustimmung stattfinden. Ich garantiere, dass die zu Recht beanstandeten Passagen unverzüglich entfernt werden, ohne dass von Ihrer Seite die Einschaltung eines Rechtsbeistandes erforderlich ist. Dennoch von Ihnen ohne vorherige Kontaktaufnahme ausgelöste Kosten werde ich vollumfänglich zurückweisen und gegebenenfalls Gegenklage wegen Verletzung vorgenannter Bestimmungen einreichen.

MICRO SEIKI ARM BOARD AX-1 (#1) This listing is for one arm board This Micro Seiki AX-1 arm board was manufactured specifically for Micro Seikis DDX-1000 and MD-1000 turntables. It is made of light weight gun metal (aka red brass), an alloy of copper, tin and zinc. A second AX-1 is listed on another of our ads. As you can see in the photos this arm board is complete and in excellent condition. Shown in the photos for this ad are five other M.S. arm boards recently listed in addition to this one. The Micro Seiki DDX-1000 turntable shown in the photos is not for sale on this ad, it’s only there to display the arm boards in use. That DDX-1000 turntable is listed on another of our ads though.

MICRO SEIKI ARM BOARD AX-2 (#2) **This sale is for One Arm Board This Micro Seiki AX-2 arm board was manufactured specifically for Micro Seikis DDX-1000 and MD-1000 turntables. It is made of light weight gun metal (aka red brass), an alloy of copper, tin and zinc. Another AX-2 of ours is listed on a different ad. As you can see in the photos this arm board is complete and in excellent condition. Shown in the photos for this ad are five other M.S. arm boards we recently listed in addition to this one. The Micro Seiki DDX-1000 turntable shown in the photos is not for sale on this ad, it’s only there to display the arm boards in use. That DDX-1000 turntable is listed on another of our ads though.

MICRO SEIKI ARM BOARD AX-1 (#2) **This listing is for one arm board This Micro Seiki AX-1 arm board was manufactured specifically for Micro Seikis DDX-1000 and MD-1000 turntables. It is made of light weight gun metal (aka red brass), an alloy of copper, tin and zinc. A second AX-1 is listed on another of our ads. As you can see in the photos this arm board is complete and in excellent condition. Shown in the photos for this ad are five other M.S. arm boards recently listed in addition to this one. The Micro Seiki DDX-1000 turntable shown in the photos is not for sale on this ad, it’s only there to display the arm boards in use. That DDX-1000 turntable is listed on another of our ads though.

MICRO SEIKI ARM BOARD AX-4 This listing is for one Arm Board This Micro Seiki AX-4 arm board was manufactured specifically for Micro Seikis DDX-1000 and MD-1000 turntables. It is made of light weight gun metal (aka red brass), an alloy of copper, tin and zinc. We have listed an exact reproduction of the original AX-4 on another ad. (The reproduction is almost triple the weight of the original part so its probably made of steel, an alloy of iron and carbon.) As you can see in the photos this arm board is complete and in excellent condition. Shown in the photos for this ad, we recently listed five other M.S. arm boards in addition to this one. The Micro Seiki DDX-1000 shown in the photos is not for sale on this ad, it’s only there to display the arm boards in use. That DDX-1000 turntable is listed on another of our ads though.

MICRO SEIKI ARM BOARD AX-2 (#1) ** This listing is for one armboard This Micro Seiki AX-2 arm board was manufactured specifically for Micro Seikis DDX-1000 and MD-1000 turntables. It is made of light weight gun metal (aka red brass), an alloy of copper, tin and zinc. Another AX-2 of ours is listed on a different ad. As you can see in the photos one of the mounting screws is broken. Its possible to re-tap the hole but this arm board is non functional as it is. The price reflects the damage. Shown in the photos for this ad are five other M.S. arm boards we recently listed in addition to this one. The Micro Seiki DDX-1000 turntable shown in the photos is not for sale on this ad, it’s only there to display the arm boards in use. That DDX-1000 turntable is listed on another of our ads though.