Revised Turntable Yamaha PF-800 Stainless Steel, Silver And BlueThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay.This turntable is available in 220/230V or 110V/120V (for example USA and world wide).You can find even more interesting offers from us. Take a look at... Art and Sound Germany Yamaha PF-800 silver blueSemi-automatic with lift function and limit switchOrtofon Vinyl Master Alpha pickupRCA audio cable and power cable permanently installedOur turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work.Technical data:Drive beltSpeed: 33 1/3 and 45 (manual fine adjustment possible)Synchronization fluctuations: 0.028%Rumble noise distance: 80dBTurntable: main plate die-cast aluminum, sub-platter die-cast zincPitch: 6%Outputs: 2x RCA cable, 1x ground cablePower consumption: 7 wattsDimensions: 47.3 x 37.6 x 15.4cmWeight: approx. 15kgSpecial features:Removable headshellSubchassis, mounted to swing freely on three conical springshigh-quality materialsTwin tonearmsTonearm height adjustableLift Adjust (lifting point of the tonearm can be adjusted at the end of the record)The following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of an endurance test Pickup (included): Ortofon VinylMaster AlphaWith the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Housing:The original housing is refurbished, the wooden structure is removed, painted with several layers of paint and then sealed with clear varnish. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The spring caps are re-turned from full stainless steel and the old suspension is replaced with stronger suspension. Power cable and cinch cable are replaced.Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood including hinges: 190LED lighting (see picture 4): 149XXL device feet made of stainless steel, height adjustable (see picture 2): 133Stainless steel control element (see picture 5): 179Cartridge MM system including installation:Ortofon 2M Red (elliptical): 90Ortofon 2M Blue (elliptical, naked): 190Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 590Ortofon 2M Black LVB 250 (Shibata): 899Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699Cartridge MC System including installation:Audio-Technica AT33EV(elliptical): 499Audio-Technica ATPTG/II (microlinear): 599Audio-Technica AT33SA (Shibata): 799The original housing is refurbished, the wooden structure is removed, painted with several layers of paint and then sealed with clear varnish. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The spring caps are re-turned from full stainless steel and the old suspension is replaced with stronger suspension. Power cable and cinch cable are replaced. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of Herstellernummer nicht zutreffend Marke Yamaha EAN Nicht zutreffend Modell PF-800

Original Front Plate Front Panel Control Panel Yamaha - PF-800 With 2 CapsThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Original front panel, control panel and 2 cover caps for the fastening screwsYamaha PF-800usedOriginal front panel, control panel and 2 cover caps for the fastening screws Yamaha PF-800 used Marke Yamaha Markenkompatibilität Für Yamaha Produktart Frontplatte EAN Nicht zutreffend

Original front panel, control panel and 2 cover caps for the fastening screwsYamaha PF-800used conditionOriginal front panel, control panel and 2 cover caps for the fastening screws Yamaha PF-800 used condition

Original Yamaha PF-800 Turntable RCA line Input Cord And Board This came off a non working unit. Check out my other PF-800 parts

Original Spring Suspension Assembly & Floating Post For Yamaha PF-800 Turntable Check out my other PF-800 parts

Original Front Plate Front Panel Control Panel Yamaha - PF-800 With 2 Caps Check out my other PF 800 parts

Original Outer Platter For Yamaha PF-800 Turntable Check out my other PF-800 parts

Original Inner Platter And Bearing Assembly For Yamaha PF-800 Turntable Check out my other PF 800 parts

Original Dust Cover Yamaha PF-800 / 1000 Turntable Hinge Mounts Check out my other PF-800 parts

3 Original Gold Spring Covers For Yamaha PF-800 Turntable Check out my other PF-800 parts

Individual production! Please note the processing time stated on Ebay.This turntable is available in 220/230V or 110V/120V (for example USA and world wide).You can find even more interesting offers from us. Take a look at... Art and Sound Germany Yamaha PF-800 original conditionSemi-automatic with lift function and limit switch 33/45 speed control, adjustable Ortofon OM5E cartridge RCA audio cable and power cable permanently installed Technical data: Drive belt Speed: 33 1/3 and 45 (manual fine adjustment possible) Synchronization fluctuations: 0.028% Rumble noise distance: 80dB Turntable: main plate die-cast aluminum, sub-platter die-cast zinc Pitch: 6% Outputs: 2x RCA cable, 1x ground cable Power consumption: 7 watts Dimensions: 47.3 x 37.6 x 15.4cm Weight: approx. 15kg Special features: Removable headshell Subchassis, mounted to swing freely on three conical springs high quality materials Twin tonearms Tonearm height adjustable Lift Adjust (lifting point of the tonearm can be adjusted at the end of the record) The following work will be carried out: Revision of electronic and mechanical components Um- or Components required for installation Setting and balancing the different speeds Adjustment and adjustment of the suspension Checking and adjusting the tonearm and cartridge  Thorough cleaning of the entire record player Execution of an endurance testfollowing Parts are as Accessoriesör erhäliltic and not ingredient this auction:Hood including hinges: 190300g plate weight gold anodized (picture 13): 60Device feet made of stainless steel, Height adjustable, total weight 2520g, 65x25mm (Image 14): 120Stainless steel spring pots (picture 15): 99320g plate weight made of stainless steel (picture 16): 50Stainless steel control element (Figure 17): 179 Cartridge MM system including installation:Ortofon 2M Red (elliptical): 90Ortofon 2M Blue (elliptical, naked): 190Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 590Ortofon 2M Black LVB 250 (Shibata with boron needle carrier): 899AUDIO-TECHNICA VM 95ML (Microlinear): 179 AUDIO-TECHNICA VM 95SH (Shibata): 219AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (Special Line Contact): 699Cartridge MC System including installation:AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799Individual production! Please note the processing time stated on Ebay. This turntable is available in 220/230V or 110V/120V (for example USA and world wide). You can find even more interesting offers from us. Take a look at... Art and Sound Germany Speed: 33 1/3 and 45 (manual fine adjustment possible) Turntable: main plate die-cast aluminum, sub-platter die-cast zinc Subchassis, mounted to swing freely on three conical springs Lift Adjust (lifting point of the tonearm can be adjusted at the end of the record) following Parts are as Accessoriesör erhäliltic and not ingredient this auction: Device feet made of stainless steel, Height adjustable, total weight 2520g, 65x25mm (Image 14): 120 320g plate weight made of stainless steel (picture 16): 50 Ortofon 2M Black LVB 250 (Shibata with bor

Original Turntable Yamaha PF-800 Gold Edition Top Condition The description of this item has been automatically translated. If you have any questions, please feel free to contact us. Individual production! Please note the processing time stated on Ebay.This turntable is available in 220/230V or 110V/120V (for example USA and world wide).You can find even more interesting offers from us. Take a look at... Art and Sound Germany Yamaha PF-800 original conditionSemi-automatic with lift function and limit switch 33/45 speed control, adjustable Cartridge Ortofon OM5E RCA audio cable and power cable permanently installed Technical data: Drive belt Speed: 33 1/3 and 45 (manual fine adjustment possible) Synchronization fluctuations: 0.028% Rumble noise distance: 80dB Turntable: main plate die-cast aluminum, sub-platter die-cast zinc Pitch: 6% Outputs: 2x RCA cable, 1x ground cable Power consumption: 7 watts Dimensions: 47.3 x 37.6 x 15.4cm Weight: approx. 15kg Special features: Removable headshell Subchassis, mounted to swing freely on three conical springs high quality materials Twin tonearms Tonearm height adjustable Lift Adjust (lifting point of the tonearm can be adjusted at the end of the record) The following work will be carried out: Revision of electronic and mechanical components Um- or Components required for installation Setting and balancing the different speeds Adjustment and adjustment of the suspension Checking and adjusting the tonearm and cartridge  Thorough cleaning of the entire record player Execution of an endurance testfollowing Parts are as Accessoriesör erhäliltic and not ingredient this auction:Hood including hinges: 190300g plate weight gold anodized (picture 13): 60Device feet made of stainless steel, Height adjustable, total weight 2520g, 65x25mm (Image 14): 120Stainless steel spring pots (picture 15): 99320g plate weight made of stainless steel (picture 16): 50Stainless steel control element (Figure 17): 179 Cartridge MM system including installation:Ortofon 2M Red (elliptical): 90Ortofon 2M Blue (elliptical, naked): 190Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 590Ortofon 2M Black LVB 250 (Shibata with boron needle carrier): 899AUDIO-TECHNICA VM 95ML (Microlinear): 179 AUDIO-TECHNICA VM 95SH (Shibata): 219AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (Special Line Contact): 699Cartridge MC System including installation:AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799Individual production! Please note the processing time stated on Ebay. This turntable is available in 220/230V or 110V/120V (for example USA and world wide). You can find even more interesting offers from us. Take a look at... Art and Sound Germany Speed: 33 1/3 and 45 (manual fine adjustment possible) Turntable: main plate die-cast aluminum, sub-platter die-cast zinc Subchassis, mounted to swing freely on three conical springs Lift Adjust (lifting point of the tonearm can be adjusted at the end of the record) following Parts are as Accessoriesör erhäliltic and not ingredient this auction: Device feet made of stainless steel, Height adjustable, total weight 2520g, 65x25mm (Image 14): 120 320g plate weight made of stainless steel (picture 16): 50 Ortofon 2M Black LVB 250 (Shibata with bor Herstellernummer nicht zutreffend Marke Yamaha Modell PF-800 EAN Nicht zutreffend

Individual production! Please note the processing time stated on Ebay.This turntable is available in 220/230V or 110V/120V (for example USA and world wide). You can find even more interesting offers from us. Take a look at... Art-and-Sound Germany Bei Selbstabholung 70,00 € Rabatt! Yamaha PF-800 Originalzustand Halbautomat mit Liftfunktion und Endabschaltung 33/45 speed control, regelbar Tonabnehmer Ortofon OM5E Cinch-Audiokabel und Netzkabel fest installiert Technische Daten: Antrieb Riemen Drehzahl: 33 1/3 und 45 (manuelle Feinjustierung möglich) Gleichlaufschwankungen: 0,028 % Rumpelgeräuschabstand: 80dB Plattenteller: Hauptteller Aluminium-Druckguss, Subteller Zinkdruckguss Pitch: 6% Ausgänge: 2x Cinch-Kabel, 1x Massekabel Leistungsaufnahme: 7 Watt Abmessungen: 47,3 x 37,6 x 15,4cm Gewicht: ca. 15 kg Besondere Ausstattung: Headshell abnehmbar Subchassis, auf drei Kegelfedern frei schwingend gelagert hochwertige Materialien Zwillingstonarm Tonarm höhenverstellbar Lift Adjust (Abhebepunkt des Tonarmes am Ende der Platte einstellbar) Folgende Arbeiten werden durchgeführt: Revision elektronischer und mechanischer Bauteile Um- bzw. Einbau benötigten Komponenten Einstellung und Abgleich der verschiedenen Geschwindigkeiten Einstellung und Justierung der Federung Überprüfung und Justierung des Tonarmes und des Tonabnehmers Gründliche Reinigung des gesamten Plattenspielers Ausführung eines Dauerlauftestes Folgende Teile sind als Zubehör erhältlich und nicht Bestandteil dieser Auktion: Haube inklusive Scharniere: 190300g Plattengewicht gold eloxiert (Bild 13): 60 Gerätefüße aus Edelstahl, höhenverstellbar, Gesamtgewicht 2520g, 65x25mm (Bild 14): 120 Federtöpfe aus Edelstahl (Bild 15): 99320g Plattengewicht aus Edelstahl (Bild 16): 50 Steuerelement aus Edelstahl (Bild 17): 179 Cartridge MM System including installation: Ortofon 2M Red (elliptisch): 90 Ortofon 2M Blue (elliptisch, nackt): 190 Ortofon 2M Bronze (Fineline): 390 Ortofon 2M Black (Shibata): 590 Ortofon 2M Black LVB 250 (Shibata mit Bor-Nadelträger): 899 AUDIO-TECHNICA VM 95ML (Microlinear): 179 AUDIO-TECHNICA VM 95SH (Shibata): 219AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (Special-Line-Contact): 699Cartridge MC System including installation:AUDIO-TECHNICA AT-OC9XEB (elliptisch): 279 AUDIO-TECHNICA AT-OC9XEN (elliptisch, nackt): 369 AUDIO-TECHNICA AT-33EV (elliptisch): 499 AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599 AUDIO-TECHNICA AT-33SA (Shibata): 799

Used inner platter and bearing from a working Yamaha PF-800 turntable.

Original Yamaha PF-800 Turntable RCA line Input Cord And Board This came off a non working unit. Check out my other PF-800 parts

Original Spring Suspension Assembly & Floating Post For Yamaha PF-800 Turntable Check out my other PF-800 parts