Xindak FS-3 2.5 meters speaker cable, one side banana connectors other side forks, please see photos.Shipping only for EU, cost around 20-30 eur, depends on your location. Speaker Cable is a new product basing on patented speaker cables FS-1 and FS-2. After lots of efforts on the research and development for more than 2 years, FS-3 is finally launched, which will be an important model of Xindak foil type audio cables. The structure difference between FS-3 and FS-2 (or FS-1) is that its positive pole is made of 35 pieces of 0.1 * 0.8mm 5N copper foil covered by polytetrafluoroethylene (PTFE), instead of pure copper or silvery foil in 0.1*20mm. The cooper foil can transmit signal with each other separately, and all of them are perpendicular to cathode, which is a difficult structural technics. The cathode is composed by cotton mesh with high density. The advantages for this special structure of FS-3 are as follow: 1. keep the character of foil structure that low loss on high frequency and decrease the capacitance between cooper foils at the same time, in order to make the cable convenient to match the amplifier whose capacitive load capability is low; 2. The speed of signal transmitting is higher, besides, it remains the thickness and charm of the sound, with full music sense, good control. There is special flat aluminium shield rings at the two terminals, in order to shield the Hertzian waves and make the sound purer.

Xindak FS-3 2.5 meters speaker cable, one side banana connectors other side forks, please see photos.Shipping only for EU, cost around 20-30 eur, depends on your location. Speaker Cable is a new product basing on patented speaker cables FS-1 and FS-2. After lots of efforts on the research and development for more than 2 years, FS-3 is finally launched, which will be an important model of Xindak foil type audio cables. The structure difference between FS-3 and FS-2 (or FS-1) is that its positive pole is made of 35 pieces of 0.1 * 0.8mm 5N copper foil covered by polytetrafluoroethylene (PTFE), instead of pure copper or silvery foil in 0.1*20mm. The cooper foil can transmit signal with each other separately, and all of them are perpendicular to cathode, which is a difficult structural technics. The cathode is composed by cotton mesh with high density. The advantages for this special structure of FS-3 are as follow: 1. keep the character of foil structure that low loss on high frequency and decrease the capacitance between cooper foils at the same time, in order to make the cable convenient to match the amplifier whose capacitive load capability is low; 2. The speed of signal transmitting is higher, besides, it remains the thickness and charm of the sound, with full music sense, good control. There is special flat aluminium shield rings at the two terminals, in order to shield the Hertzian waves and make the sound purer.

Xindak FS-3 2.5 meters speaker cable, one side banana connectors other side forks, please see photos.Shipping only for EU, cost around 20-30 eur, depends on your location. Speaker Cable is a new product basing on patented speaker cables FS-1 and FS-2. After lots of efforts on the research and development for more than 2 years, FS-3 is finally launched, which will be an important model of Xindak foil type audio cables. The structure difference between FS-3 and FS-2 (or FS-1) is that its positive pole is made of 35 pieces of 0.1 * 0.8mm 5N copper foil covered by polytetrafluoroethylene (PTFE), instead of pure copper or silvery foil in 0.1*20mm. The cooper foil can transmit signal with each other separately, and all of them are perpendicular to cathode, which is a difficult structural technics. The cathode is composed by cotton mesh with high density. The advantages for this special structure of FS-3 are as follow: 1. keep the character of foil structure that low loss on high frequency and decrease the capacitance between cooper foils at the same time, in order to make the cable convenient to match the amplifier whose capacitive load capability is low; 2. The speed of signal transmitting is higher, besides, it remains the thickness and charm of the sound, with full music sense, good control. There is special flat aluminium shield rings at the two terminals, in order to shield the Hertzian waves and make the sound purer.

Xindak FS-3 2.5 meters speaker cable, one side banana connectors other side forks, please see photos.Shipping only for EU, cost around 20-30 eur, depends on your location. Speaker Cable is a new product basing on patented speaker cables FS-1 and FS-2. After lots of efforts on the research and development for more than 2 years, FS-3 is finally launched, which will be an important model of Xindak foil type audio cables. The structure difference between FS-3 and FS-2 (or FS-1) is that its positive pole is made of 35 pieces of 0.1 * 0.8mm 5N copper foil covered by polytetrafluoroethylene (PTFE), instead of pure copper or silvery foil in 0.1*20mm. The cooper foil can transmit signal with each other separately, and all of them are perpendicular to cathode, which is a difficult structural technics. The cathode is composed by cotton mesh with high density. The advantages for this special structure of FS-3 are as follow: 1. keep the character of foil structure that low loss on high frequency and decrease the capacitance between cooper foils at the same time, in order to make the cable convenient to match the amplifier whose capacitive load capability is low; 2. The speed of signal transmitting is higher, besides, it remains the thickness and charm of the sound, with full music sense, good control. There is special flat aluminium shield rings at the two terminals, in order to shield the Hertzian waves and make the sound purer.

Xindak FS-3 2.5 meters speaker cable, one side banana connectors other side forks, please see photos.Shipping only for EU, cost around 20-30 eur, depends on your location. Speaker Cable is a new product basing on patented speaker cables FS-1 and FS-2. After lots of efforts on the research and development for more than 2 years, FS-3 is finally launched, which will be an important model of Xindak foil type audio cables. The structure difference between FS-3 and FS-2 (or FS-1) is that its positive pole is made of 35 pieces of 0.1 * 0.8mm 5N copper foil covered by polytetrafluoroethylene (PTFE), instead of pure copper or silvery foil in 0.1*20mm. The cooper foil can transmit signal with each other separately, and all of them are perpendicular to cathode, which is a difficult structural technics. The cathode is composed by cotton mesh with high density. The advantages for this special structure of FS-3 are as follow: 1. keep the character of foil structure that low loss on high frequency and decrease the capacitance between cooper foils at the same time, in order to make the cable convenient to match the amplifier whose capacitive load capability is low; 2. The speed of signal transmitting is higher, besides, it remains the thickness and charm of the sound, with full music sense, good control. There is special flat aluminium shield rings at the two terminals, in order to shield the Hertzian waves and make the sound purer.

Xindak FS-3 2.5 meters speaker cable, one side banana connectors other side forks, please see photos.Shipping only for EU, cost around 20-30 eur, depends on your location. Speaker Cable is a new product basing on patented speaker cables FS-1 and FS-2. After lots of efforts on the research and development for more than 2 years, FS-3 is finally launched, which will be an important model of Xindak foil type audio cables. The structure difference between FS-3 and FS-2 (or FS-1) is that its positive pole is made of 35 pieces of 0.1 * 0.8mm 5N copper foil covered by polytetrafluoroethylene (PTFE), instead of pure copper or silvery foil in 0.1*20mm. The cooper foil can transmit signal with each other separately, and all of them are perpendicular to cathode, which is a difficult structural technics. The cathode is composed by cotton mesh with high density. The advantages for this special structure of FS-3 are as follow: 1. keep the character of foil structure that low loss on high frequency and decrease the capacitance between cooper foils at the same time, in order to make the cable convenient to match the amplifier whose capacitive load capability is low; 2. The speed of signal transmitting is higher, besides, it remains the thickness and charm of the sound, with full music sense, good control. There is special flat aluminium shield rings at the two terminals, in order to shield the Hertzian waves and make the sound purer.

Xindak FS-3 2.5 meters speaker cable, one side banana connectors other side forks, please see photos.Shipping only for EU, cost around 20-30 eur, depends on your location. Speaker Cable is a new product basing on patented speaker cables FS-1 and FS-2. After lots of efforts on the research and development for more than 2 years, FS-3 is finally launched, which will be an important model of Xindak foil type audio cables. The structure difference between FS-3 and FS-2 (or FS-1) is that its positive pole is made of 35 pieces of 0.1 * 0.8mm 5N copper foil covered by polytetrafluoroethylene (PTFE), instead of pure copper or silvery foil in 0.1*20mm. The cooper foil can transmit signal with each other separately, and all of them are perpendicular to cathode, which is a difficult structural technics. The cathode is composed by cotton mesh with high density. The advantages for this special structure of FS-3 are as follow: 1. keep the character of foil structure that low loss on high frequency and decrease the capacitance between cooper foils at the same time, in order to make the cable convenient to match the amplifier whose capacitive load capability is low; 2. The speed of signal transmitting is higher, besides, it remains the thickness and charm of the sound, with full music sense, good control. There is special flat aluminium shield rings at the two terminals, in order to shield the Hertzian waves and make the sound purer.

XINDAK speaker cable FS-1 Super Hi-Fi, FLAT foil-band, 2.5 meters (8.2 ft) NEW.