Up for sale is this pair of b&w bowers and wilkins DM602 speaker 1 alloy-dome tweeter set with gaskets. These tweeters came out of working speakers, sound great, and are in excellent condition. All electronics are sold as is and may need to be serviced, cleaned, or repaired. Please view all the pictures carefully and feel free to message me with any questions regarding the item. Thanks for looking!

The listing is for a pair of matching grilles. I can sell 1 piece for half plus postage. They are in a good cosmetic condition. However one grille has a little hole at the too corner. Another one has a tiny hole in the top corner and a bit larger hole at the very bottom of the grille. They not very noticeable. No cracks or pulls. Please inspect photos. Please ask if you want to see anything in details. I will try to make more close-up photos upon request. They come from pets/smoke free home. They will be packed very carefully for safe travel to anywhere in the world. Please let me know if you need any other B&W genuine part. I might be able to get them for you.

This listing is for a single tweeter, which is compatible with all B&W DM600, DM601, DM602.5, DM603, DM604, and S3 Series speakers. The tweeter is in excellent condition, functions perfectly, and produces exceptional sound quality. Though there is a tiny mark on the dome, it is barely visible and difficult for the camera to capture. Please examine the photos for further inspection. If you require other used authentic parts from B&W, kindly let us know, as we may be able to acquire them for you.

The listing is for one single tweeter. This unit is used in all B&W DM600 S3, DM601 S3, DM602 S3, DM602.5 S3, DM603 S3, DM604 S3 speakers. The tweeter is fully working. Pristine. No creases or tears. Please inspect the photos.

The listing is for one single tweeter. This unit is used in all B&W DM600 S3, DM601 S3, DM602 S3, DM602.5 S3, DM603 S3, DM604 S3 speakers. The tweeter is fully working. Minor crease to the foil, but no holes or tears so still sounds as it should. Please inspect the photos. This is a black tweeter, this tweeter also come in grey but has a different part number. Please make sure it is the black tweeter that is required for your speaker.

B&W BOWERS & WILKINS DM602 S3 Speakers Large Bookshelf Consecutive Serial Number. Working, some cosmetic issues on cabinets, drivers are ok. Look at pics

For sale are these 8 x B&W Rubber Grommets These grommets are used and as such will have marks and signs or wear/use, but still in a good condition and still rubbery (not hard, plastic feeling and dried out). Please check out all the pictures as these make up a large part of the description and show the condition well.Removed from pair of B&W DM601 S3 Speakers and these are used to hold the cloth front covers in place. These are used in all the S3 speakers (DM601, DM602, DM602.5, DM603 and DM604 which came in the beige/grey colour. Perfect if yours have hardened or been lost etc. They come as pictured, nothing else is included. Shipping to the UK is free and it Will be expertly packaged for delivery and will be sent fully insured too. Happy to ship abroad, this will be done via the Global Shipping Programme, and they supply the cost of this. Payment via Ebay or cash on collection from Norwich (I am in Lingwood) or with prior arrangement I can possibly deliver in and around Norwich/Yarmouth!Any questions, please ask. Thanks Normal 0 false false false EN-GB X-NONE X-NONE

This listing is for a single tweeter, which is compatible with all B&W DM600, DM601, DM602.5, DM603, DM604, and S3 Series speakers. The tweeter functions perfectly and produces exceptional quality. Though there is a few tiny marks on the dome, it is barely visible. Please examine the photos for further inspection. If you require other used authentic parts from B&W, kindly let us know, as we may be able to acquire them for you.

A set of B&W Bowers & Wilkins DM602 S3 DM604 S3 Upper/Lower baffle.

B&W DM602.5 S3 Speaker Crossover Bowers Wilkins Genuine ZZ13188 G.

B&W Bowers & Wilkins DM602 S3 7 Woven Driver Speaker Woofer ZZ12882 PAIR. Came out of speakers with damaged cabinets tested matched pair

Up for sale is this pair of Bowers and wilkins DM602 S3 Speaker grill/covers. The grills are in excellent cosmetic condition. All items are sold as is and may have stains, scratches, creases, holes, scuffs, tears, rips, and wear consistent with age. Please view all images carefully and feel free to message me with any questions regarding the item. Thanks for looking!

B&W DM602.5 S3 Speaker Crossover Bowers Wilkins Genuine ZZ13188 G.

A set of B&W Bowers & Wilkins DM602 S3 DM604 S3 Upper/Lower baffle.

B&W Bowers & Wilkins DM601, DM602, DM603 & DM604 S3 Generic Tweeter Coils Foils.Always fit in pairs, that way they will look exactly the same & they will also sound exactly the same.You are buying a pair of generic replacement tweeter coils & foils (as seen on these pictures) to fit the bowers & wilkins DM601, DM602, DM603 & DM604 S3 loudspeakers.They are a very good replacement for your old blown or dented tweeters.Dependant on when exactly your tweeters were made, these will either slot stright into place or you will find they are about 1.5mm wider that the slot for them.If they are slightly wider, then all you need to do is to put a very thin edge of superglue around the edge of your plastic tweeter surround (use the tip of a cotton bud) & then place the tweeter coil - foil in place using the magnet part of your complete unit to line it up while the glue sets.BEFORE you first open the tweeter up make sure that you mark the position of both parts of the tweeter, they slot together in a certain place & marking them before opening them will save you loads of time & agro later on.You will need the following tools to fit these.A philips screwdriver (small - medium head)A flathead screwdriver (small - medium head)A soldering iron & solder.Some superglug & a cotton bud.These replacement tweeter coils & foils can be used with many bowers & wilkins loudspeakers.You will need a steady hand, a fair degree of common sence (like do not glue into place until you have made sure it fits together correctly) & a few minutes spare time when fitting these.REMEMBER, THEY ARE VERY DELICATE, NO RETURNS ON ANY COILS - FOILS THAT YOU DAMAGE WHILST FITTING THEM.RETURNS ON BRAND NEW NOT FITTED COILS - FOILS ONLY.If you are not still not sure about fitting these, in the first instance have a look on youtube, you will be able to find videos on there showing what to do.If you still have issues, then send an email through ebay messaging to us, we will attempt to get back to you within 24hrs (we are NOT sat on the computer 24/7)FREE UK SHIPPING ON THIS ITEM.All items are sent by signed for & recorded delivery.

The listing is for one single tweeter. This unit is used in all B&W DM600 DM601 DM602.5 DM603 DM604 S3 Series speakers. The tweeter is fully working and sounds great. The dome is slightly dented. Please inspect the photos. Please ask if you need any other used B&W genuine parts. We might get them for you.

The listing is for a genuine B&W Crossover which is used in all B&W DM602.5 S3 speakers. It’s in a perfect cosmetic condition and fully working. Please ask if you want to see anything in details. I will try to make more close-up photos upon request. It comes from pets/smoke free home. Please let me know if you need any other B&W genuine part. I might be able to get them for you.

For sale are these 8 x B&W Rubber Grommets These grommets are used and as such will have marks and signs or wear/use, but still in a good condition and still rubbery (not hard, plastic feeling and dried out). Please check out all the pictures as these make up a large part of the description and show the condition well.Removed from pair of B&W DM601 S3 Speakers and these are used to hold the cloth front covers in place. These are used in all the S3 speakers (DM601, DM602, DM602.5, DM603 and DM604 which came in the beige/grey colour. Perfect if yours have hardened or been lost etc. They come as pictured, nothing else is included. Shipping to the UK is free and it Will be expertly packaged for delivery and will be sent fully insured too. Happy to ship abroad, this will be done via the Global Shipping Programme, and they supply the cost of this. Payment via Ebay or cash on collection from Norwich (I am in Lingwood) or with prior arrangement I can possibly deliver in and around Norwich/Yarmouth!Any questions, please ask. Thanks Normal 0 false false false EN-GB X-NONE X-NONE

Pair of Bower & Wilkins DM602 S3 In Black Ash. Type: 2 way, 2 driver loudspeaker system Frequency Response: 43Hz to 30kHz Recommended Amplifier: 25 to 120W Crossover Frequency: 3000Hz Impedance: 8? Sensitivity: 90dB Midbass: 1 x 180mm Kevlar cone Tweeter: 1 x 26mm metal dome Enclosure: bass reflex Grille: black cloth Finish: black ash Dimensions: 490 x 236 x 306mm Weight: 9.8kg The speakers are in their original packing and have been stored in clean dry environment. if you require ant further information then please contact us via the usual channels. Due to the size it will be collection only at HP23 6BJ Tring Herts.

Bowers & Wilkins DM 602 S3 speakers good working condition. With wood stand and leads with connectors. Fully good working condition just on one speaker top have some scratches. Speakers looks as see on pictures

Bowers & Wilkins B&W DM 602 S3 Speakers. I have tested them all working as they should be. Used them for a few years but no longer in need in them. Good for in house entertainment systems or even just to listen to some music in your room.

Bowers and Wilkins DM602.5 S3 floor standing speakers. In good condition with no damage to tweeters or cones Collection only from MK18

B&W DM602.5 S3 Speaker Crossover Bowers Wilkins Genuine ZZ13188 G.

A set of B&W Bowers & Wilkins DM602 S3 DM604 S3 Upper/Lower baffle.