Description
Price reduction on weekends 999 EUR instead of 1099 EUR. Video demo link: https://youtu.be/PfmWMBlK0qA For sale a very beautiful turntable, a high end device from the golden era VICTOR QLY66F.It is in a very good aesthetical condition without major visible scratches or other signs (see pictures and video attached).The dust cover can pe polished and made scratch free by any automotive polisher. If you are interested i can do it locally, it will take 3-5 additional days and some 20 euro fee.Technically, it works as intended, the speed is rock steady, all automatic functions (auto play, end detection, repeat, lift up/down, move forward/reverse, zero balance were tested and working)The only minor issue is that at start the arm shakes very little, barely visible before seating at the blank start area of the disc, you may see in the video link. However this has no impact on functionality nor on the sonics characteristics. It just track and play excellent.A SHURE M44 cartridge with a brand new stylus will be included also (see the latest pictures). In the pictures/video i have used another demonstrative cartridge. It will be shipped from Romania to all EU countries covered by DPD Courier (or its partners), professionally packed: platter and counterweight removed, placed at the bottom of the box under the player, a lot of protective foam, double carton box, etc so please dont worry!In the price a 220/240V-100V high quality voltage converter from Kashimura will be included, this model being a 100V japanese market model.https://audio-database.com/VICTOR/player/ql-y66f.htmlThis is a full-auto player that pursues sound quality equivalent to that of manual machines.For the turntable, diameter 35 cm, weight 2.9 kg (including mat), inertial mass 560kg-cm2As a result, the inertia mass is increased by more than 30% compared to a 30 cm diameter turntable with the same weight and shape, and basic rotational performance is improved.A magnetic support DD motor is used to reduce the bearing load and friction caused by the heavy turntable, as well as the downward force caused by the rotor magnet.In the magnetic support system, the rotor is located below the rotor yoke and the suction force is applied upward. As a result, the bearing load is reduced to about 1/10 of that of the conventional system, to only about 500g, thus reducing noise and wear caused by bearing friction.An ED (electro dynamic) servo arm is used for the tone arm.The ED servo tone arm is an electronic Q damping arm that detects vibration of the arm by two pairs of coreless linear motors directly connected to horizontal and vertical bearings, and cancels the vibration by generating inverse torque by feedback control of a microcomputer. This suppresses needle skipping and intermodulation distortion induced by low frequency resonance. In addition, full automatic operation is possible without touching the arm body by volume and button operation.In addition, manual operation is also supported and the arm can be moved by hand.An up pipe replacement system is adopted, and straight and S-shaped arm pipes can be replaced freely.The height of the arm can be adjusted. In addition, since the dynamic balance system is adopted, the movement of the arm is not affected even if the player leans.The cabinet uses a rose-like all-wood cabinet with mirror finish.The servo circuit uses a double-servo quartz circuit with 30 times higher quartz lock stability than conventional ones.Equipped with a turntable independent start / stop switch that can be used for manual operation, etc.U uhType Record playerMotor FG Detection Coreless DC ServoWow flutter 0.005% (RMS, Rotating Part FG Method)Signal-to-noise ratio 80dB(DIN-B)Tone arm ED servo, pipe exchange systemWeight of mounted cartridge 4.5 ~ 21g (Including Shell)Up to 35g (using SW-Y66F, including shell)Needle pressure adjustment range 0 ~ 3gExternal dimensions Width 495x Height 187x Depth 405 mmWeight 12.3kg
Live search