VPI JMW 10.5 Tonearm with Tonearm Base. Fantastic Unipivot tonearm from VPI Industries USA. Condition is excellent and minimum usage and stored away for number of years and better go to someone who will make most of it. It comes with mint condition tonearm wand + Tonearm Base. NOTE: Only piece missing is tonearm rest/holder piece (see below link). It can be easily sourced or purchased from VPI Industries.https://vpiindustries.com/products/vpi-printed-slipmat Other than little tonearm holder, all there and also comes with full original packaging. BONUS: I will also include most parts of VPI JMW 10.5 Tonearm Anti-Skate Upgrade which is worth over $300. There are rubber rings, nylon string, mount ring are missing . Major metal parts are there for new owner to utilise to set up the antiskate. https://www.ebay.com.au/itm/392296065574 Thank you for reading.

CJ Walker CJ55 Turntable with Hadcock GH228 Unipivot Tonearm. A very rare, highly collectible and beautiful sounding early British turntable and tonearm. Refurbished & Serviced holds speed beautifully and will give many years of listening pleasure. Suspended wooden Sub chassis with a 10mm bronze bearing, sub platter and platter made of Tufnol. On/off is via the discrete button on the front. Runs either 33.3rpm or 45rpm, speed is changed by lifting the (new) belt between the different sized pulleys. Original (removable) lid is in great condition with no cracks, chips or splits and looks fantastic. Hinge resistance is adjusted via the screw heads either side of the hinge which can be set to self support the lid if you wanted it up during operation. Overall this is an absolute stunner and wouldn’t look out of place in most living rooms. Certainly scores high on the “Partner Approval Factor” ratings :) I would keep it but I’m having to have a bit of a clear out as I’m setting up a new hi-fi dealership! If you’ve any questions please feel free to ask, happy to demonstrate prior to sale just so that I know you’ll be leaving happy! Alternatively can deliver and set it up in your home upon a non refundable deposit of £50. Advertised Elsewhere. ** This was advertised with a Michell Focus Unipivot tonearm but after a bit of thought I felt that the Hadcock suited it better. The Michell arm will be up for sale soon or I could put it back on if you’d prefer?

DECCA London International unipivot tonearm. Pulled off a Linn Sondek LP12 Comes with the Decca London Cartridge attached in decent used shape. Cueing power lift may not work- I couldnt get the cueing motor to do anything.

This unipivot tonearm from the 1970s is a unique design in that it acheives unmeasurable friction in any plane of movement due to electrical contacts between unipivot arm and base being by each of the 4 arm pins running in a bath of mercury. The arm is ideal for low mass high compliant cartidges. Please note the calibrated sliding base. Included is a downloaded copy of the instruction manual and template. The red dot on the end of the counter-weight and the drilled and lightened headshell, means this arm is for cartridges in the 5-8gms range. Please note that one of the four fixing studs is missing from the base along with its knurled adjusting nut. Although the remaining 3 studs are sufficient to secure the fixing of the arm, there is a replacement 5BA stud and a standard nut included in the sale.

Follow us| Sign up for our newsletter VPI JMW VTA Base on the Fly for VPI turntables For Unipivot Tonearm For over 20 years High End Audio Auctions has been selling the finest HiFi online, but did you know that we BUY your HiFi equipment as well? Contact our sister company STEREOBUYERS for a fair quote today! All items included are pictured. Items are tested fully to ensure all functions work as expected - any defects and additional service done to the item are noted. Items are not restored or reconditioned, unless specified. All items we sell come with a 30-day warranty - your satisfaction is guaranteed. Original shipping on returns will be refunded at the sellers discretion. Local Pickup in NYC Available VPI JMW VTA Base on the Fly Details & Testing Notes Cosmetic Condition:7/10: Good - some signs of wear, looks used but well-maintainedCosmetic Notes:Light wear can be seen on the adjustment knob. Very good overall condition. Please see all high resolution photographs below.Functional Notes:Functions as intended.Original Box:NoManual:NoShipping Method:FedEx Ground (Domestic) / USPS Priority, Ebay Standard Delivery (International)Shipping Weight (lbs):8 (12x10x6) High-End Audio Auctions has been THE trusted source for high-end, classic and vintage audio components on eBay since 2000! Our unique products, unparalleled service and bombproof packaging keeps our customers coming back again and again. We are experts at selling and shipping worldwide, with items ranging from $5 to $50,000. We look forward to earning your repeat business! By placing a bid on any of our listings, you agree to our terms & conditions Click here to learn more Home| About Us| Store Policies| FAQs| Feedback| Contact Us| Custom Tuned Cables _gsrx_vers_1436 (GS 9.0.5 (1436))

CJ Walker CJ55 Turntable with Michell Focus Unipivot Tonearm. A very rare, highly collectible and beautiful sounding early British turntable. Refurbished & Serviced holds speed beautifully and will give many years of listening pleasure. Suspended wooden Sub chassis with a 10mm bronze bearing, sub platter and platter made of Tufnol. On/off is via the discrete button on the front. Runs either 33.3rpm or 45rpm, speed is changed by lifting the (new) belt between the different sized pulleys. Original (removable) lid is in great condition with no cracks, chips or splits and looks fantastic. Hinge resistance is adjusted via the screw heads either side of the hinge which can be set to self support the lid if you wanted it up during operation. Overall this is an absolute stunner and wouldn’t look out of place in most living rooms. Certainly scores high on the “Partner Approval Factor” ratings :) I would keep it but I’m having to have a bit of a clear out as I’m setting up a new hi-fi dealership! If you’ve any questions please feel free to ask, happy to demonstrate prior to sale just so that I know you’ll be leaving happy! Alternatively can deliver and set it up in your home upon a non refundable deposit of £50. Advertised Elsewhere.

DECCA London International unipivot tonearm. Pulled off a Linn Sondek LP12 Comes with the Decca London Cartridge attached in decent used shape. Cueing power lift may not work- I couldnt get the cueing motor to do anything.

CJ Walker CJ55 Turntable with Michell Focus Unipivot Tonearm. A very rare, highly collectible and beautiful sounding early British turntable. Refurbished & Serviced holds speed beautifully and will give many years of listening pleasure. Suspended wooden Sub chassis with a 10mm bronze bearing, sub platter and platter made of Tufnol. On/off is via the discrete button on the front. Runs either 33.3rpm or 45rpm, speed is changed by lifting the (new) belt between the different sized pulleys. Original (removable) lid is in great condition with no cracks, chips or splits and looks fantastic. Hinge resistance is adjusted via the screw heads either side of the hinge which can be set to self support the lid if you wanted it up during operation. Overall this is an absolute stunner and wouldn’t look out of place in most living rooms. Certainly scores high on the “Partner Approval Factor” ratings :) I would keep it but I’m having to have a bit of a clear out as I’m setting up a new hi-fi dealership! If you’ve any questions please feel free to ask, happy to demonstrate prior to sale just so that I know you’ll be leaving happy! Alternatively can deliver and set it up in your home upon a non refundable deposit of £50. Advertised Elsewhere.

We use a 24 hour courier service but please allow up to 3 days handling time as a lot of our items are large and timeconsuming to package. Many thanks :) Please see our video of how we packaged turntables for transit here:- Description: Fully Working example of the classic TD160 vintage turntabe with Mayware Formula IV unipivot tonearm. new belt fitted. Working but unknown hours VMS 20E MM cartidge fitted. Only the odd minor mark here and there, but as you can see, this is a superb example. There is one stubborm bit of tape residue on the front left edge… which i am currently trying to get off.. Lid hinges are undamaged. The holes on the right hand side of the top plate are where the original thorens arm lifter used to be. Please inspect the pictures (please also use the zoom function on the photos) and be sure of what you are buying, please don’t buy this if you are at all unsure, I will answer any questions you have, just email BEFORE PURCHASING. This is a used item and has been fairly described to the best of our ability, it has not been serviced by us, just described in it’s current operational and cosmetic order. If you are not happy with any item, we can arrange collection from you for a full refund (even if you are outside the UK) We will not provide any partial refunds and will not cover any restoration, detailed or internal cleaning, repairs or modification costs. Any questions regarding out of eBay deals will be ignored Any items suspected missing in transit, must be reported to us within 10 days. Shipping We ship using a 24 hour courier. Please allow up to 3 days handling time as a lot of our items are large and take time to package well. Collections Collections from our unit in Bordon are available on Wednesdays and Fridays. Visit our storeHi-Fi Hangar Vintage hifi specialists Other PROJECTS, SPARES & REPAIRS HI-FI & AUDIO EQUIPMENT AMPLIFIERS DISK PLAYERS (CD/DVD/MD/SACD) TUNERS CASSETTE/TAPE DECKS SPEAKERS STUDIO EQUIPMENT TURNTABLES/RECORD PLAYERS CARTRIDGES TONEARMS MERCHANDISE T-SHIRTS ACCESSORIES Payment We take payment through the ebay managed payment system, Shipping We ship using a 24 hour courier. Please allow up to 3 days handling time as a lot of our items are large and take time to package well. _gsrx_vers_1516 (GS 9.3 (1516))

DECCA London International unipivot tonearm. Pulled off a Linn Sondek LP12 Comes with the Decca London Cartridge attached in decent used shape. Cueing power lift may not work- I couldnt get the cueing motor to do anything.

CJ Walker CJ55 Turntable with Michell Focus Unipivot Tonearm. A very rare, highly collectible and beautiful sounding early British turntable. Refurbished & Serviced holds speed beautifully and will give many years of listening pleasure. Suspended wooden Sub chassis with a 10mm bronze bearing, sub platter and platter made of Tufnol. On/off is via the discrete button on the front. Runs either 33.3rpm or 45rpm, speed is changed by lifting the (new) belt between the different sized pulleys. Original (removable) lid is in great condition with no cracks, chips or splits and looks fantastic. Hinge resistance is adjusted via the screw heads either side of the hinge which can be set to self support the lid if you wanted it up during operation. Overall this is an absolute stunner and wouldn’t look out of place in most living rooms. Certainly scores high on the “Partner Approval Factor” ratings :) I would keep it but I’m having to have a bit of a clear out as I’m setting up a new hi-fi dealership! If you’ve any questions please feel free to ask, happy to demonstrate prior to sale just so that I know you’ll be leaving happy! Alternatively can deliver and set it up in your home upon a non refundable deposit of £50. Advertised Elsewhere.