Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Here is a lovely and “very near original condition” Linn Sondek LP12 “Fruit Box” . These early decks are renowned for their warm fluid sound. It is s/n 26393 – and has 22-Feb-1978 date-stamped on the inside of the plinth. Everything works. It has the original red button power supply and a spot-welded sub-chassis with a gold colored bearing body. The motor is very quiet , smooth and gives a correct and stable speed. The plinth is a “Greaves Fluted” type in the now unobtainable Afromosia wood and is in excellent condition with no obvious marks or dents. It still has the original makers s/n label on the back. It has correctly functioning sprung hinges and the transparent lid is in excellent undamaged condition. It has a rare and sought after Hadcock GH228 uni-pivot tonearm which is in excellent , complete and working condition. It’s fitted with an Ortofon VMS20E Cartridge/Stylus and even has an additional extra-heavy counterweight and an additional brand new, boxed replacement stylus. This tone-arm is original continuous wired type and is in excellent shape. Admittedly it’s very tricky to set up correctly but sounds fantastic when it’s all properly balanced and aligned. The deck has enjoyed continuous ownership from new, up to 2022. Recently I have replaced the suspension springs and grommets as the original ones were beginning to sag. I also had a new drive belt fitted as again, the original one was becoming brittle. It’s been fully thoroughly cleaned and serviced. I had considered further upgrades but decided it’s better left alone as it sounds fantastic and there aren’t many of these original specification red button decks left now as most were personalized or upgraded. This is a very delicate and sensitive deck so its listed for collection only ..... no returns accepted once it leaves my care.

Hadcock GH228 Unipivot Tonearm, full working order, complete with phono cables and earth wire. Has been fitted to Thorens TD160 B Mk II and working beautifully since late 1970s. I have included photographs of the mounted tonearm, and after removal. The phono cables and earth wire are connected to the tonearm through a soldered connection board as shown in the photographs. On the Thorens the connection board is screwed directly to a suitable point on the chassis. *************The cartridge and turntable are not included in the sale**************** I bought the deck already set up with the arm in 1978 which didnt come with the original Hadcock box or manual etc but it will be well packaged. Will ship within UK with Parcelforce 48 including full insurance. Stated delivery cost assumes UK buyer. Overseas shipment will be through ebay Global Shipping Program or an insured alternative as buyer prefers. Overseas shipping cost will be advised depending on location of buyer but should not be more than £30 based on Royal Mail International Tracked service. PLEASE NOTE I WILL BE ON HOLIDAY BETWEEN 19th and 29th JULY SO WILL NOT BE ABLE TO DISPATCH UNTIL MONDAY 31st JULY. IF AN ACCEPTABLE OFFER IS MADE BEFORE THE 19th I WILL DISPATCH BEFORE LEAVING.

DECCA London International unipivot tonearm. Pulled off a Linn Sondek LP12 Comes with the Decca London Cartridge attached in decent used shape. Cueing power lift may not work- I couldnt get the cueing motor to do anything.

Original Project 8.6 Unipivot Tonarm / mit Kabel. Einpunktlager. Für diverse Project Modelle oder universal bzw. für DIY Zwecke einsetzbar. Guter Zustand. Technische Daten: Effective tonearm mass 8,9g Effective tonearm length 8,6 (218,5mm) Overhang 18,5mm

For sale is my 12” VPI Unipivot Fatboy Armwand. I bought it new in September 2021 and used it regularly since then on my Classic 4 with either a Benz Micro LPS or a Lyra Parnassus Dct. The arm is in excellent condition and comes with a larger arm rest post and dual-pivot attachment. The arm is much easier to adjust the counterweight than the previous VPI arms. It also looks and sounds much better than both the 3D arm and the metal arm. I’ve been very pleased with this arm but am selling it because I have traded in my Classic 4 for an SME turntable and no longer need it. VPI did not include any documentation on the arm, but I was able to figure out how to make most of the adjustments using a gimbaled arm manual from their website and having had 20+ years of experience with their uni-pivot arms. I have included a copy of that manual. The arm has been used in a smoke-free, pet-free environment.International buyers are responsible for any customs fees associated with the purchase of this item. Free shipping within the continental US. Specifications (from Elusive Discs website): Pivot to spindle: 300 mm Effective length: 313.0 mm Effective mass: 12.5 g Overhang: 13 mm Offset angle: 17.37 degrees Average RMS distortion: 0.267% VPIs Most Rigid Tonearm Armwand Ever for Unparalleled Dynamics! 3D Printed armtube with New Triangular to Circular Resonance Canceling Taper Nordost Reference Tonearm Armwand Wiring Micrometer-style precision Adjustable Counterweight Adjustable Azimuth located on the side of armwand stainless section Dual Pivot Assembly (A $185 Value!)

DECCA London International unipivot tonearm. Pulled off a Linn Sondek LP12 Comes with the Decca London Cartridge attached in decent used shape. Cueing power lift may not work- I couldnt get the cueing motor to do anything.

* FREE Shipping to mainland USA. * * International Shipping with charge. * ------------------------------------------------- ITEM DESCRIPTION: For sale is a VPI tonearm base for VPI unipivot armwand. This one has the housing for fluid damping for suitable armwand either 9 or 10 or 10.5 or 12 arms. Its also the similar base from the Classic turntable with 10 arm. Bearing spike still sharp in good condition. Great for restoration or DIY projects so you can build your own unipivot design tonearm. It has signs of use and age. Please check pictures before bidding. Item will be well packed for safe arrival. ------------------------------------------------- WORKING CONDITION: Works. ------------------------------------------------- PHYSICAL CONDITION: Used with signs of age. Check pictures for cosmetic condition -------------------------------------------------------- SHIPPING:FREE Shipping to USA via USPS. Priority Mail Medium Flat Rate Box.Local pick up is welcome with no charge. ------------------------------------------------- RETURN: Item has been described to the best of my knowledge and please ask questions before bidding. Due to nature of used equipment, item is being sold AS IS, NO RETURN. ------------------------------------------------- PAYMENT: PayPal or cash for local pick up. Pay within 3 days after end of auction. ------------------------------------------------- OTHERS: Any dispute can be resolved with friendly message exchange so please contact me first before involving eBay. Dont forget to check my other auctions! --------------------------------------------------------

VPI Classic 2 Turntable · Very Good+ condition · Please closely look at photos for many details · Complete w/ Power Supply, Setup jig etc. · Record clamp, mat included · Interconnect cables, cartridge not included · Ships in two [heavy] original factory cartons $1,999 to your door (with 8% tax & $99 shipping) Normal 0 false false false EN-US X-NONE X-NONE

Follow us| Sign up for our newsletter VPI FB-12-UniPivot - Audiophile Quality Phono Turntable Tonearm SOLD AS-ISLIST OF DEFECTS IS NOT EXHAUSTIVE - THERE MAY BE ADDITIONAL DEFECTSNO RETURNS UNDER ANY CIRCUMSTANCESAll items included are pictured. Items are tested fully to ensure all functions work as expected - any defects and additional service done to the item are noted below. Items are not restored or reconditioned, unless specified. All items we sell come with a 30-day warranty - your satisfaction is guaranteed. Original shipping on returns will be refunded at the sellers discretion. Local Pickup in NYC Available VPI FB-12-UniPivot Details & Testing Notes Cosmetic Condition:6/10: Fair - pronounced signs of wearCosmetic Notes:Arm has broken / separated at the base. It is pulled slightly apart to show the break in the photos, but it will slide back into place as needed for repair. Please see all high resolution photographs below.Functional Notes:Leads all pass a signal as intended, but the tonearm has broken / separated at the base. - SOLD AS ISSerial #:N/AOriginal Box:NoManual:NoShipping Weight (lbs):2lbs - FedEx Medium Box High-End Audio Auctions has been THE trusted source for high-end, classic and vintage audio components on eBay since 2000! Our unique products, unparalleled service and bombproof packaging keeps our customers coming back again and again. We are experts at selling and shipping worldwide, with items ranging from $5 to $50,000. We look forward to earning your repeat business! By placing a bid on any of our listings, you agree to our terms & conditions Click here to learn more Home| About Us| Store Policies| FAQs| Feedback| Contact Us| Custom Tuned Cables _gsrx_vers_1516 (GS 9.3 (1516))

Michell Reference Hydraulic Transcription Turntable, Rare Focus Tonearm. Updates below as checked manual for info re parts, and turntable plugged in and powers up This was purchased approx 10 years ago from the original first owner It’s a Michell Reference Hydraulic Turntable with Focus Tonearm At the time Michell offered a custom upgrade and this has the non standard platter, there is an identical turntable on ebay at the moment, £1300 Previous owner had it working perfectly however years later and a few home moves it remained unused by me stored in a box, a family member had a look and discovered A; the belt has gone missing so will need replacing B, the metal fluid well that sits underneath the platter (holding the oil I think) previously had the focus platter mounting spindle glued together, see pics 9 and 10, and last two pics, this has now snapped off, so this section will need replacing C, the tonearm was also taken apart and there was a part not put back properly so have a single loose counterweight and ball bearing, so arm is loose Due to the above it’s sold as spares or repairs. The turntable powers up see last pic but unable to play a disc due to platter mounting spindle not attached as mentioned so no idea of mechanical side of things, but all parts appear present Condition wise it’s lovely, be hard to find another this clean, black base is still glossy and unmarked, the lid is also very clean with the usual glue bubbling along the seams and only a couple of light scratches on one side Chrome surround is also very clean as well, platter cloth again some glue remnants around the side Oh and the tonearm will need a cartridge Sad to see this go but this turntable is a little too complicated for me and will likely never get round to sorting There is no reserve, the tonearm on its own fetch a bit as are well liked Opportunity for someone who maybe owns a tatty one to purchase Or quite a straight forward project for anyone who knows their turntables I will not post the turntable, sorry but it’s too fragile, am based in West London If you want to arrange a courier I will place it in a box but it’s the buyer’s responsibility if damaged in transit, much prefer collection Also included is the turntable manual and Focus Unipivot Arm Manual both rare on CD Welcome to view item if local, no returns, happy to answer any questions best I can, described to the best of my limited knowledge, please use pics as a guide

DECCA London International unipivot tonearm. Pulled off a Linn Sondek LP12 Comes with the Decca London Cartridge attached in decent used shape. Cueing power lift may not work- I couldnt get the cueing motor to do anything.

CJ Walker CJ55 Turntable with Hadcock GH228 Unipivot Tonearm. A very rare, highly collectible and beautiful sounding early British turntable and tonearm. Refurbished & Serviced holds speed beautifully and will give many years of listening pleasure. Suspended wooden Sub chassis with a 10mm bronze bearing, sub platter and platter made of Tufnol. On/off is via the discrete button on the front. Runs either 33.3rpm or 45rpm, speed is changed by lifting the (new) belt between the different sized pulleys. Original (removable) lid is in great condition with no cracks, chips or splits and looks fantastic. Hinge resistance is adjusted via the screw heads either side of the hinge which can be set to self support the lid if you wanted it up during operation. Overall this is an absolute stunner and wouldn’t look out of place in most living rooms. Certainly scores high on the “Partner Approval Factor” ratings :) I would keep it but I’m having to have a bit of a clear out as I’m setting up a new hi-fi dealership! If you’ve any questions please feel free to ask, happy to demonstrate prior to sale just so that I know you’ll be leaving happy! Alternatively can deliver and set it up in your home upon a non refundable deposit of £50. Advertised Elsewhere. ** This was advertised with a Michell Focus Unipivot tonearm but after a bit of thought I felt that the Hadcock suited it better. The Michell arm will be up for sale soon or I could put it back on if you’d prefer?

Hadcock GH 228 tonearm Super model w. GH uni-lift (vintage) in great condition comes with 1.7 meter cable and cable attachment,

CJ Walker CJ55 Turntable with Hadcock GH228 Unipivot Tonearm. A very rare, highly collectible and beautiful sounding early British turntable and tonearm. Refurbished & Serviced holds speed beautifully and will give many years of listening pleasure. Suspended wooden Sub chassis with a 10mm bronze bearing, sub platter and platter made of Tufnol. On/off is via the discrete button on the front. Runs either 33.3rpm or 45rpm, speed is changed by lifting the (new) belt between the different sized pulleys. Original (removable) lid is in great condition with no cracks, chips or splits and looks fantastic. Hinge resistance is adjusted via the screw heads either side of the hinge which can be set to self support the lid if you wanted it up during operation. Overall this is an absolute stunner and wouldn’t look out of place in most living rooms. Certainly scores high on the “Partner Approval Factor” ratings :) I would keep it but I’m having to have a bit of a clear out as I’m setting up a new hi-fi dealership! If you’ve any questions please feel free to ask, happy to demonstrate prior to sale just so that I know you’ll be leaving happy! Alternatively can deliver and set it up in your home upon a non refundable deposit of £50. Advertised Elsewhere. ** This was advertised with a Michell Focus Unipivot tonearm but after a bit of thought I felt that the Hadcock suited it better. The Michell arm will be up for sale soon or I could put it back on if you’d prefer?

Mayware Formula IV Unipivot Pick Up Arm With original RCA Phono Connector Great Condition Please study the pictures to see what is supplied

Follow us| Sign up for our newsletter VPI FB-12-UniPivot - Audiophile Quality Phono Turntable Tonearm SOLD AS-ISLIST OF DEFECTS IS NOT EXHAUSTIVE - THERE MAY BE ADDITIONAL DEFECTSNO RETURNS UNDER ANY CIRCUMSTANCESAll items included are pictured. Items are tested fully to ensure all functions work as expected - any defects and additional service done to the item are noted below. Items are not restored or reconditioned, unless specified. All items we sell come with a 30-day warranty - your satisfaction is guaranteed. Original shipping on returns will be refunded at the sellers discretion. Local Pickup in NYC Available VPI FB-12-UniPivot Details & Testing Notes Cosmetic Condition:6/10: Fair - pronounced signs of wearCosmetic Notes:Arm has broken / separated at the base. Please see all high resolution photographs below.Functional Notes:Leads all pass a signal as intended, but the tonearm has broken / separated at the base. - SOLD AS ISSerial #:N/AOriginal Box:NoManual:NoShipping Weight (lbs):2lbs - FedEx Medium Box High-End Audio Auctions has been THE trusted source for high-end, classic and vintage audio components on eBay since 2000! Our unique products, unparalleled service and bombproof packaging keeps our customers coming back again and again. We are experts at selling and shipping worldwide, with items ranging from $5 to $50,000. We look forward to earning your repeat business! By placing a bid on any of our listings, you agree to our terms & conditions Click here to learn more Home| About Us| Store Policies| FAQs| Feedback| Contact Us| Custom Tuned Cables _gsrx_vers_1516 (GS 9.3 (1516))

MAYWARE FORMULA TONEARM SUPERB UNIPIVOT IN NICE CONDITION COMPLETE WITH PHONO CABLE SILICON DAMPING FLUID CAN BE USED WITH THESE FOR EVEN BETTER RESULTS

CJ Walker CJ55 Turntable with Hadcock GH228 Unipivot Tonearm. A very rare, highly collectible and beautiful sounding early British turntable and tonearm. Refurbished & Serviced holds speed beautifully and will give many years of listening pleasure. Suspended wooden Sub chassis with a 10mm bronze bearing, sub platter and platter made of Tufnol. On/off is via the discrete button on the front. Runs either 33.3rpm or 45rpm, speed is changed by lifting the (new) belt between the different sized pulleys. Original (removable) lid is in great condition with no cracks, chips or splits and looks fantastic. Hinge resistance is adjusted via the screw heads either side of the hinge which can be set to self support the lid if you wanted it up during operation. Overall this is an absolute stunner and wouldn’t look out of place in most living rooms. Certainly scores high on the “Partner Approval Factor” ratings :) I would keep it but I’m having to have a bit of a clear out as I’m setting up a new hi-fi dealership! If you’ve any questions please feel free to ask, happy to demonstrate prior to sale just so that I know you’ll be leaving happy! Alternatively can deliver and set it up in your home upon a non refundable deposit of £50. Advertised Elsewhere. ** This was advertised with a Michell Focus Unipivot tonearm but after a bit of thought I felt that the Hadcock suited it better. The Michell arm will be up for sale soon or I could put it back on if you’d prefer?

Follow us| Sign up for our newsletter VPI JMW VTA Base on the Fly for VPI turntables For Unipivot Tonearm For over 20 years High End Audio Auctions has been selling the finest HiFi online, but did you know that we BUY your HiFi equipment as well? Contact our sister company STEREOBUYERS for a fair quote today! All items included are pictured. Items are tested fully to ensure all functions work as expected - any defects and additional service done to the item are noted. Items are not restored or reconditioned, unless specified. All items we sell come with a 30-day warranty - your satisfaction is guaranteed. Original shipping on returns will be refunded at the sellers discretion. Local Pickup in NYC Available VPI JMW VTA Base on the Fly Details & Testing Notes Cosmetic Condition:7/10: Good - some signs of wear, looks used but well-maintainedCosmetic Notes:Light wear can be seen on the adjustment knob. Very good overall condition. Please see all high resolution photographs below.Functional Notes:Functions as intended.Original Box:NoManual:NoShipping Method:FedEx Ground (Domestic) / USPS Priority, Ebay Standard Delivery (International)Shipping Weight (lbs):8 (12x10x6) High-End Audio Auctions has been THE trusted source for high-end, classic and vintage audio components on eBay since 2000! Our unique products, unparalleled service and bombproof packaging keeps our customers coming back again and again. We are experts at selling and shipping worldwide, with items ranging from $5 to $50,000. We look forward to earning your repeat business! By placing a bid on any of our listings, you agree to our terms & conditions Click here to learn more Home| About Us| Store Policies| FAQs| Feedback| Contact Us| Custom Tuned Cables _gsrx_vers_1436 (GS 9.0.5 (1436))

CJ Walker CJ55 Turntable with Hadcock GH228 Unipivot Tonearm. A very rare, highly collectible and beautiful sounding early British turntable and tonearm. Refurbished & Serviced holds speed beautifully and will give many years of listening pleasure. Suspended wooden Sub chassis with a 10mm bronze bearing, sub platter and platter made of Tufnol. On/off is via the discrete button on the front. Runs either 33.3rpm or 45rpm, speed is changed by lifting the (new) belt between the different sized pulleys. Original (removable) lid is in great condition with no cracks, chips or splits and looks fantastic. Hinge resistance is adjusted via the screw heads either side of the hinge which can be set to self support the lid if you wanted it up during operation. Overall this is an absolute stunner and wouldn’t look out of place in most living rooms. Certainly scores high on the “Partner Approval Factor” ratings :) I would keep it but I’m having to have a bit of a clear out as I’m setting up a new hi-fi dealership! If you’ve any questions please feel free to ask, happy to demonstrate prior to sale just so that I know you’ll be leaving happy! Alternatively can deliver and set it up in your home upon a non refundable deposit of £50. Advertised Elsewhere. ** This was advertised with a Michell Focus Unipivot tonearm but after a bit of thought I felt that the Hadcock suited it better. The Michell arm will be up for sale soon or I could put it back on if you’d prefer?

VPI JMW 10.5 Tonearm with Tonearm Base. Fantastic Unipivot tonearm from VPI Industries USA. Condition is excellent and minimum usage and stored away for number of years and better go to someone who will make most of it. It comes with mint condition tonearm wand + Tonearm Base. NOTE: Only piece missing is tonearm rest/holder piece (see below link). It can be easily sourced or purchased from VPI Industries.https://vpiindustries.com/products/vpi-printed-slipmat Other than little tonearm holder, all there and also comes with full original packaging. BONUS: I will also include most parts of VPI JMW 10.5 Tonearm Anti-Skate Upgrade which is worth over $300. There are rubber rings, nylon string, mount ring are missing . Major metal parts are there for new owner to utilise to set up the antiskate. https://www.ebay.com.au/itm/392296065574 Thank you for reading.

CJ Walker CJ55 Turntable with Hadcock GH228 Unipivot Tonearm. A very rare, highly collectible and beautiful sounding early British turntable and tonearm. Refurbished & Serviced holds speed beautifully and will give many years of listening pleasure. Suspended wooden Sub chassis with a 10mm bronze bearing, sub platter and platter made of Tufnol. On/off is via the discrete button on the front. Runs either 33.3rpm or 45rpm, speed is changed by lifting the (new) belt between the different sized pulleys. Original (removable) lid is in great condition with no cracks, chips or splits and looks fantastic. Hinge resistance is adjusted via the screw heads either side of the hinge which can be set to self support the lid if you wanted it up during operation. Overall this is an absolute stunner and wouldn’t look out of place in most living rooms. Certainly scores high on the “Partner Approval Factor” ratings :) I would keep it but I’m having to have a bit of a clear out as I’m setting up a new hi-fi dealership! If you’ve any questions please feel free to ask, happy to demonstrate prior to sale just so that I know you’ll be leaving happy! Alternatively can deliver and set it up in your home upon a non refundable deposit of £50. Advertised Elsewhere. ** This was advertised with a Michell Focus Unipivot tonearm but after a bit of thought I felt that the Hadcock suited it better. The Michell arm will be up for sale soon or I could put it back on if you’d prefer?

DECCA London International unipivot tonearm. Pulled off a Linn Sondek LP12 Comes with the Decca London Cartridge attached in decent used shape. Cueing power lift may not work- I couldnt get the cueing motor to do anything.

This unipivot tonearm from the 1970s is a unique design in that it acheives unmeasurable friction in any plane of movement due to electrical contacts between unipivot arm and base being by each of the 4 arm pins running in a bath of mercury. The arm is ideal for low mass high compliant cartidges. Please note the calibrated sliding base. Included is a downloaded copy of the instruction manual and template. The red dot on the end of the counter-weight and the drilled and lightened headshell, means this arm is for cartridges in the 5-8gms range. Please note that one of the four fixing studs is missing from the base along with its knurled adjusting nut. Although the remaining 3 studs are sufficient to secure the fixing of the arm, there is a replacement 5BA stud and a standard nut included in the sale.