UP FOR SALE, Nice, fully working Kenwood KD-750/Trio KP-7700 quartz pll direct drive manual turntable. specs below from web, sorry about the cost of shipping but this thing weighs 39lbs. It won’t be cheap to ship. I am sorry but for the high price of shipping, but I am paying a third-party for professional shipping and packaging. Private pickup available. Comes with Dust cover, 45 adapter, with proper 15mm overhang line. Does not come w/ headshell or cartridge. Platter mat is in good condition as well, although not original, that had harden, and needed replacement. Turntable is all original and working well, has been throughly tested with speed and quartz lock solid at both 33 1/3 and 45rpm. Recap kits are available on this site if you are interested. But as you can see from pic speed is dead on, per app tests. This is a vintage turntable that has some dings and scratches, I tried to take pics and show all faults, pics towards end show the minor scuffs. Comes with nice dust cover, with some scuffs and scratches, will polish up nice. Headshell and cartridge not included. Currently in use until I sell, so don’t hesitate to ask any questions. TIA I will choose method of shipping after sale, most likely FedEx or UPS TypeRecord player Turntable Part (PM 700) Drive systemDirect drive Drive motorQuartz PLL Servo 20 Pole 30 Slot DC Motor Turntable33.0 cm aluminum die-cast, 2.6 kg Moment of inertia550 kg / cm2(Including Rubber Sheet) Number of revolutions33 1/3, 45 rpm Wow and flutter0.022% WRMS or less Signal-to-noise ratio62dB(JIS) 74dB(DIN-B) Transient load characteristics0.00030% or Less (400 Hz, 33 1/3, 20g / cm Load) 0.00015% or Less (1 kHz, 33 1/3, 20g ? cm Load) Steady-state load characteristics0% (Needle Pressure Up to 120g) Start-up characteristic1.8 seconds Rotational speed deviationWithin ± 0.002% Time drift0.0002% / h or less Temperature drift0.00002% / ? or less Power supply voltage characteristics0% (± 10 V) Tone Arm Section (TA-71) TypeStatic balance S-shaped pipe arm StructureElastic coupling mass separation system Effective arm length245mm Overhang15mm Tracking error+ 1.8 ° ~ -1.0 ° Needle pressure variable range0 ~ 3.0g (0.1g step) Applicable Cartridge Weight4g ~ 14g (when using the attached shell) Attached shell11g, magnesium alloy die-cast Arm height adjustment6mm Attachment mechanismHeight variable absorber Arm elevation Anti-skating Pure electronic brake Gold-plated audio cord Pwer100 VAC, 50Hz/60Hz Power consumption10W External dimensionsWidth 490x Height 160x Depth 423 mm Weight17.5kg To see sound test, please use link https://youtube.com/shorts/gMYK7iOqzEI?si=xGs8i1QOd_rv_Lrf

UP FOR SALE, Nice, fully working Kenwood KD-750/Trio KP-7700 quartz pll direct drive manual turntable. specs below from web, sorry about the cost of shipping but this thing weighs 39lbs. It won’t be cheap to ship. Private pickup available. Comes with Dust cover, 45 adapter, with proper 15mm overhang line. Does not come w/ headshell or cartridge. Platter mat is in good condition as well, although not original, that had harden, and needed replacement. Turntable is all original and working well, has been throughly tested with speed and quartz lock solid at both 33 1/3 and 45rpm. Recap kits are available on this site if you are interested. But as you can see from pic speed is dead on, per app tests. This is a vintage turntable that has some dings and scratches, I tried to take pics and show all faults, pics towards end show the minor scuffs. Currently in use until I sell, so don’t hesitate to ask any questions. TIA TypeRecord player Turntable Part (PM 700) Drive systemDirect drive Drive motorQuartz PLL Servo 20 Pole 30 Slot DC Motor Turntable33.0 cm aluminum die-cast, 2.6 kg Moment of inertia550 kg / cm2(Including Rubber Sheet) Number of revolutions33 1/3, 45 rpm Wow and flutter0.022% WRMS or less Signal-to-noise ratio62dB(JIS) 74dB(DIN-B) Transient load characteristics0.00030% or Less (400 Hz, 33 1/3, 20g / cm Load) 0.00015% or Less (1 kHz, 33 1/3, 20g ? cm Load) Steady-state load characteristics0% (Needle Pressure Up to 120g) Start-up characteristic1.8 seconds Rotational speed deviationWithin ± 0.002% Time drift0.0002% / h or less Temperature drift0.00002% / ? or less Power supply voltage characteristics0% (± 10 V) Tone Arm Section (TA-71) TypeStatic balance S-shaped pipe arm StructureElastic coupling mass separation system Effective arm length245mm Overhang15mm Tracking error+ 1.8 ° ~ -1.0 ° Needle pressure variable range0 ~ 3.0g (0.1g step) Applicable Cartridge Weight4g ~ 14g (when using the attached shell) Attached shell11g, magnesium alloy die-cast Arm height adjustment6mm Attachment mechanismHeight variable absorber Arm elevation Anti-skating Pure electronic brake Gold-plated audio cord Pwer100 VAC, 50Hz/60Hz Power consumption10W External dimensionsWidth 490x Height 160x Depth 423 mm Weight17.5kg To see sound test, please use link https://youtube.com/shorts/gMYK7iOqzEI?si=xGs8i1QOd_rv_Lrf

UP FOR SALE, Nice, fully working Kenwood KD-750/Trio KP-7700 quartz pll direct drive manual turntable. specs below from web, sorry about the cost of shipping but this thing weighs 39lbs. It won’t be cheap to ship. Private pickup available. Comes with Dust cover, 45 adapter, with proper 15mm overhang line. Does not come w/ headshell or cartridge. Platter mat is in good condition as well, although not original, that had harden, and needed replacement. Turntable is all original and working well, has been throughly tested with speed and quartz lock solid at both 33 1/3 and 45rpm. Recap kits are available on this site if you are interested. But as you can see from pic speed is dead on, per app tests. This is a vintage turntable that has some dings and scratches, I tried to take pics and show all faults, pics towards end show the minor scuffs. Currently in use until I sell, so don’t hesitate to ask any questions. TIA TypeRecord player Turntable Part (PM 700) Drive systemDirect drive Drive motorQuartz PLL Servo 20 Pole 30 Slot DC Motor Turntable33.0 cm aluminum die-cast, 2.6 kg Moment of inertia550 kg / cm2(Including Rubber Sheet) Number of revolutions33 1/3, 45 rpm Wow and flutter0.022% WRMS or less Signal-to-noise ratio62dB(JIS) 74dB(DIN-B) Transient load characteristics0.00030% or Less (400 Hz, 33 1/3, 20g / cm Load) 0.00015% or Less (1 kHz, 33 1/3, 20g ? cm Load) Steady-state load characteristics0% (Needle Pressure Up to 120g) Start-up characteristic1.8 seconds Rotational speed deviationWithin ± 0.002% Time drift0.0002% / h or less Temperature drift0.00002% / ? or less Power supply voltage characteristics0% (± 10 V) Tone Arm Section (TA-71) TypeStatic balance S-shaped pipe arm StructureElastic coupling mass separation system Effective arm length245mm Overhang15mm Tracking error+ 1.8 ° ~ -1.0 ° Needle pressure variable range0 ~ 3.0g (0.1g step) Applicable Cartridge Weight4g ~ 14g (when using the attached shell) Attached shell11g, magnesium alloy die-cast Arm height adjustment6mm Attachment mechanismHeight variable absorber Arm elevation Anti-skating Pure electronic brake Gold-plated audio cord Pwer100 VAC, 50Hz/60Hz Power consumption10W External dimensionsWidth 490x Height 160x Depth 423 mm Weight17.5kg To see sound test, please use link https://youtube.com/shorts/gMYK7iOqzEI?si=xGs8i1QOd_rv_Lrf

UP FOR SALE, Nice, fully working Kenwood/Trio KP-7700 quartz pll direct drive manual turntable. Details and specs below from web, sorry about the cost of shipping but this thing weighs 39lbs. It won’t be cheap to ship. Private pickup available. Comes with Dust cover, 45 adapter, with proper 15mm overhang line, Kenwood/Trio headshell and N-11 cartridge and stylus. Platter mat is in good condition as well. Turntable is all original and working well, has been throughly tested with speed and quartz lock solid at both 33 1/3 and 45rpm. Recap kits are available on this site if you are interested. A direct drive player with a quartz PLL control circuit. A direct drive system is adopted for the turntable part. The quartz PLL system protects rotational accuracy from steady load (static load with very low frequency component), time drift and temperature drift, and 550 kg ? cm for random transient load with high frequency component.2Steady rotation is maintained by corresponding with moment of inertia of. A double (magnetic and mechanical) integration type 180 slot 3-layer gear is used for the servo detection part of the quartz PLL circuit. In addition, the Speed-Volt (S-V) conversion method is used to convert the rotational speed of the turntable as it is into voltage. This makes the servo response linear and increases the response of the quartz PLL circuit to random and slight load fluctuations. Taking into consideration the effect of the eccentricity and twist of the turntable Center shaft on the sound, a 10 ? Center shaft is adopted, and the turntable shaft is used as a motor shaft as it is. The turntable sheet applies the principle of the Helmholtz resonance box. A small port is provided on the front surface of the table sheet and a resonance space is provided on the back surface of the table sheet to absorb the split vibration generated by the phonograph record. We have also studied the materials used to hold the turntable and the record board together when playing a record in order to improve rotational accuracy. By using MC material for the cabinet, the total weight is increased and vibration of the cabinet due to the reaction of the turntable is suppressed. Dual suspension absorbers are used for the legs. The dual suspension absorber is a unique system with less rigidity in the longitudinal direction and greater rigidity in the lateral direction. This reduces the lateral vibration that occurs when a turntable with a large moment of inertia is driven by a motor with a large starting torque, while at the same time maintaining the elasticity of the absorber from the heavy cabinet. A digital control system using a flip-flop circuit is adopted for the rotation number selector switch and start / stop switch. The power switch is independent of the start / stop selector switch and linked with the power indicator. The quartz lock indicator lights when the turntable rotates normally and the PLL system is locked. The brake part is equipped with a pure electronic brake, which realizes flexible deceleration by suppressing harmful vibration peculiar to mechanical brake. The arm base uses a collet chuck type with large mechanical impedance to suppress resonance. The tone arm adopts TA-71 which is an elastic coupling mass separation type tone arm. The tone arm is affected by two disturbances with different levels and frequencies : arm resonance and first order split resonance. The arm resonance and first order split resonance are out-of-phase vibrations in the main weight section, and it was said that it was impossible to control them simultaneously. The TA-71 was jointly developed by Trio and NHK Technical Research Institute. It cancels the arm resonance and first order split resonance at the same time. It improves sound quality by increasing howling margin and suppressing low-frequency resonance with a high level. For the internal wiring of the tone arm TA-71, the silk-wound Pentlitz wire of ?? structure with less DC impedance, additional capacitance, and additional inductance is used to improve the channel separation. TypeRecord player Turntable Part (PM 700) Drive systemDirect drive Drive motorQuartz PLL Servo 20 Pole 30 Slot DC Motor Turntable33.0 cm aluminum die-cast, 2.6 kg Moment of inertia550 kg / cm2(Including Rubber Sheet) Number of revolutions33 1/3, 45 rpm Wow and flutter0.022% WRMS or less Signal-to-noise ratio62dB(JIS) 74dB(DIN-B) Transient load characteristics0.00030% or Less (400 Hz, 33 1/3, 20g / cm Load) 0.00015% or Less (1 kHz, 33 1/3, 20g ? cm Load) Steady-state load characteristics0% (Needle Pressure Up to 120g) Start-up characteristic1.8 seconds Rotational speed deviationWithin ± 0.002% Time drift0.0002% / h or less Temperature drift0.00002% / ? or less Power supply voltage characteristics0% (± 10 V) Tone Arm Section (TA-71) TypeStatic balance S-shaped pipe arm StructureElastic coupling mass separation system Effective arm length245mm Overhang15mm Tracking error+ 1.8 ° ~ -1.0 ° Needle pressure variable range0 ~ 3.0g (0.1g step) Applicable Cartridge Weight4g ~ 14g (when using the attached shell) Attached shell11g, magnesium alloy die-cast Arm height adjustment6mm Attachment mechanismHeight variable absorber Arm elevation Anti-skating Pure electronic brake Gold-plated audio cord Pwer100 VAC, 50Hz/60Hz Power consumption10W External dimensionsWidth 490x Height 160x Depth 423 mm Weight17.5kg

Trio Kenwood Ta-71 Masse Separationtone Arm Mit Phono Kabel Betrieb ArtikelDas Datenblatt dieses Produkts wurde ursprünglich auf Englisch verfasst. Unten finden Sie eine automatische Übersetzung ins Deutsche. Sollten Sie irgendwelche Fragen haben, kontaktieren Sie uns.ZahlungSeien Sie versichert, dass unser Shop eine Vielzahl von Zahlungsmethoden anbietet.Bitte zahlen Sie innerhalb von 5 Tagen nach Auktionsende.Über unsWir sind in Japan ansässig. Überprüfen Sie bei elektrischen Produkten den Hersteller und das Produkt und rechnen Sie die Spannung in das jeweilige Land um. Wir planen den Versand per FedEx oder DHL. Bitte kontaktieren Sie uns, da sich die Versandkosten in einigen Fällen ändern können. Es ist uns eine Freude, Sie glücklich zu machen, indem wir Ihnen unseren empfohlenen Artikel vorschlagen.Wenn Sie Fragen oder Wünsche zu Artikeln haben, wenden Sie sich bitte an uns.Internationale Käufer – Bitte beachten Sie:-Einfuhrzölle, Steuern und Gebühren sind nicht im Artikelpreis oder den Versandkosten enthalten. Diese Gebühren liegen in der Verantwortung des Käufers.- Bitte erkundigen Sie sich vor dem Bieten/Kauf beim Zollamt Ihres Landes, wie hoch diese zusätzlichen Kosten sein werden.-Diese Gebühren werden normalerweise von der ausliefernden Spedition (Versandfirma) oder bei der Abholung des Artikels erhoben – verwechseln Sie sie nicht mit zusätzlichen Versandkosten.-Wir kennzeichnen Warenwerte nicht unter dem Wert und kennzeichnen Artikel nicht als Geschenke. Die Vorschriften der US-amerikanischen und internationalen Regierung verbieten ein solches Verhalten.]]>Wir sind in Japan ansässig. Überprüfen Sie bei elektrischen Produkten den Hersteller und das Produkt und rechnen Sie die Spannung in das jeweilige Land um. Wir planen den Versand per FedEx oder DHL. Bitte kontaktieren Sie uns, da sich die Versandkosten in einigen Fällen ändern können. -Einfuhrzölle, Steuern und Gebühren sind nicht im Artikelpreis oder den Versandkosten enthalten. Diese Gebühren liegen in der Verantwortung des Käufers. -Diese Gebühren werden normalerweise von der ausliefernden Spedition (Versandfirma) oder bei der Abholung des Artikels erhoben – verwechseln Sie sie nicht mit zusätzlichen Versandkosten. -Wir kennzeichnen Warenwerte nicht unter dem Wert und kennzeichnen Artikel nicht als Geschenke. Die Vorschriften der US-amerikanischen und internationalen Regierung verbiete Capacity NA Item Width NA Compatible Product Line NA Country/Region of Manufacture NA Unit Quantity NA Type NA Brand No Brand Plug Regional Fitment NA California Prop 65 Warning NA Item Length NA Year Manufactured NA Unit Type NA Country Japan UPC NA Compatible Model NA Item Weight NA Manufacturer Warranty NA Item Height NA Features NA Color NA Compatible Brand NA MPN NA

PaymentRest assured that our store offers a variety of payment methods.Please pay within 5 days after auction is finished. About UsWe are located in Japan.For electrical products check the manufacturer and product and convert to the voltage of each country.We plan to ship by FedEx or DHL.Please contact us as the shipping fee can be changed in some cases. Its our pleasure to make you happy by proposing our recommend item.If you have any questions or request about items please feel free to ask us. International Buyers - Please Note:-Import duties taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.-Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying.-These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.-We do not mark merchandise values below value or mark items as - gifts - The US and International government regulations prohibit such behavior.>