| trq-2020d (9) | trio kt 2000 (10) | targa ht5 (12) | trio kd-207 (15) | trio kd-2070 (15) | track audio 600 (17) |
UP FOR SALE, Nice, fully working Kenwood KD-750/Trio KP-7700 quartz pll direct drive manual turntable. specs below from web, sorry about the cost of shipping but this thing weighs 39lbs. It won’t be cheap to ship. I am sorry but for the high price of shipping, but I am paying a third-party for professional shipping and packaging. Private pickup available. Comes with Dust cover, 45 adapter, with proper 15mm overhang line. Does not come w/ headshell or cartridge. Platter mat is in good condition as well, although not original, that had harden, and needed replacement. Turntable is all original and working well, has been throughly tested with speed and quartz lock solid at both 33 1/3 and 45rpm. Recap kits are available on this site if you are interested. But as you can see from pic speed is dead on, per app tests. This is a vintage turntable that has some dings and scratches, I tried to take pics and show all faults, pics towards end show the minor scuffs. Comes with nice dust cover, with some scuffs and scratches, will polish up nice. Headshell and cartridge not included. Currently in use until I sell, so don’t hesitate to ask any questions. TIA I will choose method of shipping after sale, most likely FedEx or UPS TypeRecord player Turntable Part (PM 700) Drive systemDirect drive Drive motorQuartz PLL Servo 20 Pole 30 Slot DC Motor Turntable33.0 cm aluminum die-cast, 2.6 kg Moment of inertia550 kg / cm2(Including Rubber Sheet) Number of revolutions33 1/3, 45 rpm Wow and flutter0.022% WRMS or less Signal-to-noise ratio62dB(JIS) 74dB(DIN-B) Transient load characteristics0.00030% or Less (400 Hz, 33 1/3, 20g / cm Load) 0.00015% or Less (1 kHz, 33 1/3, 20g ? cm Load) Steady-state load characteristics0% (Needle Pressure Up to 120g) Start-up characteristic1.8 seconds Rotational speed deviationWithin ± 0.002% Time drift0.0002% / h or less Temperature drift0.00002% / ? or less Power supply voltage characteristics0% (± 10 V) Tone Arm Section (TA-71) TypeStatic balance S-shaped pipe arm StructureElastic coupling mass separation system Effective arm length245mm Overhang15mm Tracking error+ 1.8 ° ~ -1.0 ° Needle pressure variable range0 ~ 3.0g (0.1g step) Applicable Cartridge Weight4g ~ 14g (when using the attached shell) Attached shell11g, magnesium alloy die-cast Arm height adjustment6mm
UP FOR SALE, Nice, fully working Kenwood KD-750/Trio KP-7700 quartz pll direct drive manual turntable. specs below from web, sorry about the cost of shipping but this thing weighs 39lbs. It won’t be cheap to ship. Private pickup available. Comes with Dust cover, 45 adapter, with proper 15mm overhang line. Does not come w/ headshell or cartridge. Platter mat is in good condition as well, although not original, that had harden, and needed replacement. Turntable is all original and working well, has been throughly tested with speed and quartz lock solid at both 33 1/3 and 45rpm. Recap kits are available on this site if you are interested. But as you can see from pic speed is dead on, per app tests. This is a vintage turntable that has some dings and scratches, I tried to take pics and show all faults, pics towards end show the minor scuffs. Currently in use until I sell, so don’t hesitate to ask any questions. TIA TypeRecord player Turntable Part (PM 700) Drive systemDirect drive Drive motorQuartz PLL Servo 20 Pole 30 Slot DC Motor Turntable33.0 cm aluminum die-cast, 2.6 kg Moment of inertia550 kg / cm2(Including Rubber Sheet) Number of revolutions33 1/3, 45 rpm Wow and flutter0.022% WRMS or less Signal-to-noise ratio62dB(JIS) 74dB(DIN-B) Transient load characteristics0.00030% or Less (400 Hz, 33 1/3, 20g / cm Load) 0.00015% or Less (1 kHz, 33 1/3, 20g ? cm Load) Steady-state load characteristics0% (Needle Pressure Up to 120g) Start-up characteristic1.8 seconds Rotational speed deviationWithin ± 0.002% Time drift0.0002% / h or less Temperature drift0.00002% / ? or less Power supply voltage characteristics0% (± 10 V) Tone Arm Section (TA-71) TypeStatic balance S-shaped pipe arm StructureElastic coupling mass separation system Effective arm length245mm Overhang15mm Tracking error+ 1.8 ° ~ -1.0 ° Needle pressure variable range0 ~ 3.0g (0.1g step) Applicable Cartridge Weight4g ~ 14g (when using the attached shell) Attached shell11g, magnesium alloy die-cast Arm height adjustment6mm
UP FOR SALE, Nice, fully working Kenwood KD-750/Trio KP-7700 quartz pll direct drive manual turntable. specs below from web, sorry about the cost of shipping but this thing weighs 39lbs. It won’t be cheap to ship. Private pickup available. Comes with Dust cover, 45 adapter, with proper 15mm overhang line. Does not come w/ headshell or cartridge. Platter mat is in good condition as well, although not original, that had harden, and needed replacement. Turntable is all original and working well, has been throughly tested with speed and quartz lock solid at both 33 1/3 and 45rpm. Recap kits are available on this site if you are interested. But as you can see from pic speed is dead on, per app tests. This is a vintage turntable that has some dings and scratches, I tried to take pics and show all faults, pics towards end show the minor scuffs. Currently in use until I sell, so don’t hesitate to ask any questions. TIA TypeRecord player Turntable Part (PM 700) Drive systemDirect drive Drive motorQuartz PLL Servo 20 Pole 30 Slot DC Motor Turntable33.0 cm aluminum die-cast, 2.6 kg Moment of inertia550 kg / cm2(Including Rubber Sheet) Number of revolutions33 1/3, 45 rpm Wow and flutter0.022% WRMS or less Signal-to-noise ratio62dB(JIS) 74dB(DIN-B) Transient load characteristics0.00030% or Less (400 Hz, 33 1/3, 20g / cm Load) 0.00015% or Less (1 kHz, 33 1/3, 20g ? cm Load) Steady-state load characteristics0% (Needle Pressure Up to 120g) Start-up characteristic1.8 seconds Rotational speed deviationWithin ± 0.002% Time drift0.0002% / h or less Temperature drift0.00002% / ? or less Power supply voltage characteristics0% (± 10 V) Tone Arm Section (TA-71) TypeStatic balance S-shaped pipe arm StructureElastic coupling mass separation system Effective arm length245mm Overhang15mm Tracking error+ 1.8 ° ~ -1.0 ° Needle pressure variable range0 ~ 3.0g (0.1g step) Applicable Cartridge Weight4g ~ 14g (when using the attached shell) Attached shell11g, magnesium alloy die-cast Arm height adjustment6mm
Kenwood Trio KD-1033B Turntable Hi-Fi Stereo Record Player Deck HiFi Audiophile In good condition There are some marks and scratches in areas There is a corner of some peeling to the wooden veneer There are marks to the top of the perspex lid but no damage or cracks One of the output leads has some exposed wire but doesnt affect its use In fully working order Has been fully tested Comes with a manual which has a ripped corner Also comes in its original box but its tatty The Kenwood KD-1033 is a 2 speed, belt drive turntable featuring tonearm elevation, anti-skating device, direct readout stylus pressure and panel floating suspension. Specifications Drive: belt-drive system Motor: 4-pole synchronous Platter: 30cm zinc alloy die-cast Speeds: 33.33 and 45rpm Wow and flutter: less than 0.06% WRMS Signal to noise ratio: more than 48dB Tonearm: static balance type, s-shaped tonearm, eia plug-in connector Effective length: 215mm Overhang: 9.5mm Stylus pressure range: 0 to 3g Usable cartridge range: 4 to 10g Dimensions: 456 x 347 x 145mm Weight: 6kg
Welcome to WILLOWS ALL-SORTS , please feel free to visit my shop and i am happy to combine postage for multiple buys ,,TRACKING PROVIDED ON EVERYTHING POSTED ,,,, new stock listed weekly ,, RECORDS DISPATCHED WITH ROYAL MAIL LARGER ITEMS WITH DPD NEXT DAY DELIVERY ALL RECORDS POSTED IN THICK CARDBOARD PROTECTIVE MAILER FREE POSTAGE ON MOST ITEMS AND FREE RETURNS WITHIN 31 DAYSBRAND NEW BELT FITTED FULLY WORKING THE LID IS NOT THE BEST DOES NOT HAVE DAMAGE BUT IT IS FOGGY I am happy to answer any questions --------Thankyou For Your Interest ---------This vintage Trio/Kenwood KD-1500 record player is a true gem for anyone looking for a high-quality turntable. Equipped with a belt drive system, this model is perfect for those who appreciate a smooth and steady performance. With stereo L/R RCA audio outputs, you can enjoy your favourite records with crisp and clear sound. The KD-1500 comes in a sleek grey colour and is compatible with 45RPM and 33.3RPM speed settings. Whether youre a music enthusiast or vinyl collector, this model is perfect for your home audio needs. Buy with confidence knowing that you are investing in a valuable addition to your sound and vision collection.
This is a vintage Trio KD 1033 belt drive turntable, perfect for any audiophile looking for a unique addition to their collection. This particular turntable requires a new stylus, but is otherwise in good working condition. With its sleek design, this turntable is sure to impress and elevate any listening experience. Featuring the brands signature belt drive, this Trio turntable delivers smooth and accurate playback. Really well performing turntable, and will not disappoint once a new stylus is fitted! Crack in the cover as pictured.
UP FOR SALE, Nice, fully working Kenwood/Trio KP-7700 quartz pll direct drive manual turntable. Details and specs below from web, sorry about the cost of shipping but this thing weighs 39lbs. It won’t be cheap to ship. Private pickup available. Comes with Dust cover, 45 adapter, with proper 15mm overhang line, Kenwood/Trio headshell and N-11 cartridge and stylus. Platter mat is in good condition as well. Turntable is all original and working well, has been throughly tested with speed and quartz lock solid at both 33 1/3 and 45rpm. Recap kits are available on this site if you are interested. A direct drive player with a quartz PLL control circuit. A direct drive system is adopted for the turntable part. The quartz PLL system protects rotational accuracy from steady load (static load with very low frequency component), time drift and temperature drift, and 550 kg ? cm for random transient load with high frequency component.2Steady rotation is maintained by corresponding with moment of inertia of. A double (magnetic and mechanical) integration type 180 slot 3-layer gear is used for the servo detection part of the quartz PLL circuit. In addition, the Speed-Volt (S-V) conversion method is used to convert the rotational speed of the turntable as it is into voltage. This makes the servo response linear and increases the response of the quartz PLL circuit to random and slight load fluctuations. Taking into consideration the effect of the eccentricity and twist of the turntable Center shaft on the sound, a 10 ? Center shaft is adopted, and the turntable shaft is used as a motor shaft as it is. The turntable sheet applies the principle of the Helmholtz resonance box. A small port is provided on the front surface of the table sheet and a resonance space is provided on the back surface of the table sheet to absorb the split vibration generated by the phonograph record. We have also studied the materials used to hold the turntable and the record board together when playing a record in order to improve rotational accuracy. By using MC material for the cabinet, the total weight is increased and vibration of the cabinet due to the reaction of the turntable is suppressed. Dual suspension absorbers are used for the legs. The dual suspension absorber is a unique system with less rigidity in the longitudinal direction and greater rigidity in the lateral direction. This reduces the lateral vibration that occurs when a turntable with a large moment of inertia is driven by a motor with a large starting torque, while at the same time maintaining the elasticity of the absorber from the heavy cabinet. A digital control system using a flip-flop circuit is adopted for the rotation number selector switch and start / stop switch. The power switch is independent of the start / stop selector switch and linked with the power indicator. The quartz lock indicator lights when the turntable rotates normally and the PLL system is locked. The brake part is equipped with a pure electronic brake, which realizes flexible deceleration by suppressing harmful vibration peculiar to mechanical brake. The arm base uses a collet chuck type with large mechanical impedance to suppress resonance. The tone arm adopts TA-71 which is an elastic coupling mass separation type tone arm. The tone arm is affected by two disturbances with different levels and frequencies : arm resonance and first order split resonance. The arm resonance and first order split resonance are out-of-phase vibrations in the main weight section, and it was said that it was impossible to control them simultaneously. The TA-71 was jointly developed by Trio and NHK Technical Research Institute. It cancels the arm resonance and first order split resonance at the same time. It improves sound quality by increasing howling margin and suppressing low-frequency resonance with a high level. For the internal wiring of the tone arm TA-71, the silk-wound Pentlitz wire of ?? structure with less DC impedance, additional capacitance, and additional inductance is used to improve the channel separation. TypeRecord player Turntable Part (PM 700) Drive systemDirect drive Drive motorQuartz PLL Servo 20 Pole 30 Slot DC Motor Turntable33.0 cm aluminum die-cast, 2.6 kg Moment of inertia550 kg / cm2(Including Rubber Sheet) Number of revolutions33 1/3, 45 rpm Wow and flutter0.022% WRMS or less Signal-to-noise ratio62dB(JIS) 74dB(DIN-B) Transient load characteristics0.00030% or Less (400 Hz, 33 1/3, 20g / cm Load) 0.00015% or Less (1 kHz, 33 1/3, 20g ? cm Load) Steady-state load characteristics0% (Needle Pressure Up to 120g) Start-up characteristic1.8 seconds Rotational speed deviationWithin ± 0.002% Time drift0.0002% / h or less Temperature drift0.00002% / ? or less Power supply voltage characteristics0% (± 10 V) Tone Arm Section (TA-71) TypeStatic balance S-shaped pipe arm StructureElastic coupling mass separation system Effective arm length245mm Overhang15mm Tracking error+ 1.8 ° ~ -1.0 ° Needle pressure variable range0 ~ 3.0g (0.1g step) Applicable Cartridge Weight4g ~ 14g (when using the attached shell) Attached shell11g, magnesium alloy die-cast Arm height adjustment6mm
Trio Kd-1033 Complete Set Of Hinges Brackets For The Dustcover Lid Dispatched with Other Courier services There are some light marks from use, overall very good condition
Vintage Kenwood TRIO KD-1033 Turntable HiFi Stereo Record Player Deck Audiophile In used condition Has normal signs of use and storage youd expect Some marks and scratches in areas The perspex lid has a few areas of burn marks Is missing the badge that would have been on the front of the unit Please see pictures for all marks Has been tested and fully working Comes without a headshell The Kenwood KD-1033 is a 2 speed, belt drive turntable featuring tonearm elevation, anti-skating device, direct readout stylus pressure and panel floating suspension. Specifications Drive: belt-drive system Motor: 4-pole synchronous Platter: 30cm zinc alloy die-cast Speeds: 33.33 and 45rpm Wow and flutter: less than 0.06% WRMS Signal to noise ratio: more than 48dB Tonearm: static balance type, s-shaped tonearm, eia plug-in connector Effective length: 215mm Overhang: 9.5mm Stylus pressure range: 0 to 3g Usable cartridge range: 4 to 10g Dimensions: 456 x 347 x 145mm Weight: 6kg
Trio/Kenwood KD-1033 turntable tonearm counterweight 12mm Bore. Dispatched with Other Courier services Taken from a damaged unit, overall very good condition.
Trio Kd-1033 Complete Set Of Hinges Brackets For The Dustcover Lid Dispatched with Other Courier services There are some light marks from use, overall very good condition
Trio Kd-1033 Original Dustcover Lid Dust Cover Dispatched with Other Courier services There are some light marks from use ( see photos) and there is a crack on the top and 1 by each hinge mount ( see photos).
Trio Kd-1033 Original Turntable Mat Slipmat Slip Mat 5mm Thick G16-0054-03 Dispatched with Other Courier services There are some light marks from use ( see photos)
Kenwood/Trio KD 1033 Headshell With Ortofon OM Cartridge/ No Stylus Dispatched with Other Courier services Tested and working, stripped from a damaged unit. Originally had the 5e stylus on. Overall very good condition
Both together! ... please verify thru images * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * PRIVATE SALE > NO Guaranty / NO Warranty / NO Return * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Vintage Trio Kenwood KD-1033B Turntable Black The item is in good used working condition. The item has some cosmetic wear, as you would expect from use over time. The Trio motif at the front is missing, please see photo 7. The plastic lid has some cracks in it, please see photos 5 & 6. The item does not come with original box, packaging or manual. UK plug supplied for power. Item has been PAT tested and briefly function tested. Please zoom in closely to examine the photographs carefully, as they do form part of this listings description, and we want you to be happy with your purchase. All items listed on our page have been kindly donated to us in support of our charity. Frequently Asked Questions Do you accept Buy it Now offers? Unless we have listed the item with a fixed price, we will not accept offers. It is our policy to allow all auctions to run their course. Can I collect in person? We offer collection in person from the location specified on the listing. You may pay in advance before collection. We require the QR code provided by eBay if you choose to pay in advance. Do you combine shipping? Yes Do you post internationally? We use eBays Global Shipping Programme for all our orders. eBay will automatically combine your purchases at the checkout stage, if this doesnt happen then please contact eBays customer service team. How long before I have to pay for my item? We allow up to 7 days for payment to be made before an unpaid item case is automatically opened by eBay. Delivery All orders are dispatched within two working days of receiving payment. We use a variety of couriers depending on your item and location. We are only able to post your order to the address provided by eBay. Can you dispatch my item at a later date? Due to limited storage space, we cannot hold onto your order. This will be dispatched within 2 working days of receiving payment. Customer Service Our team is available Monday to Friday from 9am to 5pm (excluding bank holidays). We will respond to your question within 48 hours during these times. About us 100% of our proceeds go to support Emmaus Greenwich, which gives homeless people accommodation and meaningful work. We run a small community which houses 28 people who have experienced homelessness, our Companions. We ask Companions to volunteer with us for 35 hours a week, most choose to work in our social enterprise. We also run stores which specialises in selling second-hand furniture and white goods. (Charity Number : 1064472)
Perfect working order and good cosmetic condition but does have prominent marks to the lid, please see the photos which are of the actual item for sale. Description The Kenwood KD-1033 is a 2 speed, belt drive turntable featuring tonearm elevation, anti-skating device, direct readout stylus pressure and panel floating suspension. Specifications Drive: belt-drive system Motor: 4-pole synchronous Platter: 30cm zinc alloy die-cast Speeds: 33.33 and 45rpm Wow and flutter: less than 0.06% WRMS Signal to noise ratio: more than 48dB Tonearm: static balance type, s-shaped tonearm, eia plug-in connector Effective length: 215mm Overhang: 9.5mm Stylus pressure range: 0 to 3g Usable cartridge range: 4 to 10g Dimensions: 456 x 360 x 147mm Weight: 6kg Photos:Please have a good look at the photos as they are of the actual item for sale unless otherwise stated and will give you a good idea of the item condition. They will also show you any included accessories such as remote control. If the item comes with any accessories or original box it will be included in the photos and item description, if its not then assume it isnt included. Delivery:Free next working day delivery (unless otherwise stated) within mainland UK. For all other destinations, please ask for a delivery quote or use eBays GSP shipping programme. Items will be packaged to a high standard to avoid damage in transit. Returns:Returns accepted within 14 days, the item must be in the same condition as it was prior to original sale. Buyer pays for return delivery costs. If you receive your item and feel the item is not a described, please get in touch so that we can work together to resolve the issue. Please give us the chance to put it right before leaving feedback because sometimes issues cant be avoided but we always strive to ensure the customer is happy.
TRIO KD-1033 BELT TURNTABLE WITH STANTON 500 CARTRIDGEDescriptionHI, YOU ARE BIDDING FOR A USED TRIO KD-1033 BELT TURNTABLE WITH STANTON 500 CARTRIDGEONLY COMES WITH WHAT IS SHOWN IN THE PICTURES IF ITS NOT IN THE PICTURES THEN ITS NOT INCLUDED ConditionPLEASE CHECK PICTURES FOR CONDITIONNEEDS ANEW BELT AND STYLUSDUST COVER IS CRACKEDTHE BODY HAS SOME SCUFF & SCRATCH MARKS NEEDS A GOOD CLEAN POWERS UP AND PLATTER SPINSNO FURTHER TESTS DONESOLD AS SPARES OR REPAIRS If you have any questions please do Not hesitate to contact me through eBay Thanks for looking! ShippingUK POST ONLYI COMBINE LOCAL POSTAGEFOR INTERNATIONAL BUYERS: I POST ITEMS VIA EBAY GLOBAL SHIPPING PROGRAMME ONLYFOR PARCELS OVER 2KG Please note that there are additional charges for delivery to the Highlands and Islands of Scotland,Northern Ireland,Channel islands,the Isle of Man & Isles of scilly Postcodes AB13-AB14,AB30-AB56, IV,HS,KA27-28,PA20-49,PA60-78,PH17-26,PH30-44,PH49-50,ZE BT,im,tr21-25,GYFOR PARCELS OVER 2KGPaymentI only accept pay pal & cash on collection
For sale a TRIO / KENWOOD KP-7700 / KD-750 Quartz Lock direct drive turntable in excellent condition. Turntable works properly on both speeds and keeps speed well. How you can see from posted photos the Kenwood KA-71 tonearm is complete and comes with original packaging. Turntable will comewith working SHURE cartridge. Description: The features of the turntable include: SC Quartz-lock controlled direct drive assembly New type 20-pole 30 slot SV DC servo motor Newly developed quartz lock using MOS type FET LSI 180 slot speed proportional integration type speed detector All electronic brake All tonearm connector pins gold plated Collet-type chuck tonearm base Reactionless arm elevation system Anti-skating mechanism T-shape magnesium headshell Low-capacity phono cord with gold plated pin plug King rose cabinet with ARCB anti-resonance compression base Dual suspension and adjustable height insulators Specifications Drive: quartz PLL direct-drive system Motor: 20 pole, 30 slot brushless DC servo motor Platter: 33cm, 2.6kg aluminum alloy die-cast Speeds: 33.33 and 45rpm Wow and flutter: less than 0.022% WRMS Signal to noise ratio: more than -74dB Tonearm: static-balance type, s-shaped pipe arm, eia plug-in connector Effective length: 245mm Overhang: 15mm Stylus pressure range: 0 to 3g Usable cartridge range: 4 to 14g Dimensions: 490 x 165 x 423mm Weight: 17.5kg Check my other ads for more high quality vintage electronics.
(487) : 96.84 €(385) : 93.26 €
Live search