As always, I welcome International buyers. I offer Global Shipping on this item. One later set of 2 used hinge blocks for a 1970s Transcriptors Skeleton turntable. These are the later type that use set screws that hold the blocks to the glass lid. One block has the screws, the other does not. Two screws will need to be found. Cosmetics are very good overall, there are some very minor scratches here and there, see photos below. The hinge blocks measures 5 x 3/4 x 3/4 and weigh 3.3 oz. each. Weight of the packed box will be 15 oz. Sold as-is, not working, for parts and repair, no returns. The pictures below are of the turntable part I am selling. Please e-mail any questions you might have before bidding. Packing materials, shipping and insurance at cost. Shipping quotes worldwide include insurance and packing materials. Listing includes the 2 hinge blocks as shown in pictures below.

As always, I welcome International buyers. I offer Global and International Standard Shipping on this item. One lot of 3 unused aluminum motor board caps/nuts/retainers for 1970s Transcriptors Skeleton turntable. Cosmetics are excellent plus. This listing is for one group of the 3 caps shown below. Transcriptors made 3 different sets of motor board caps/nuts/retainers for their Skeleton turntables over the years. I have only 1 of the 3 types they made that may be a match to your table. Sizes/features 3/8 diameter flat top, between 5/16 - 3/8 tall, smooth finish They all have the same thread size. Sold as-is, not working, for parts and repair, no returns. The pictures below are of the turntable parts I am selling. Please e-mail any questions you might have before bidding. Shipping quotes worldwide include insurance and packing materials. As always International Bidders are welcome to participate. Sizes/features 3/8 diameter flat top, between 5/16 - 3/8 tall, smooth finish They all have the same thread size. There are now 12 sets of 3 left, this bag is no longer this full. If you need them you might want to order as soon as possible before none are available.

As always, I welcome International buyers. I offer Global Shipping on this item. Set of 3 used spring housing legs with additional centering springs for the earliest 1970s Transcriptors Skeleton turntables. Cosmetics are very good showing mostly minor wear from use/storage. Transcriptors made a few different type legs, be sure to compare the measurements and photos below, there are no returns. They come as shown and measure 1 1/2” diameter, 2 1/2” tall, 3 1/2 to the top of the spring collar and weigh 3.8 oz. each. The total weight of all 3 is 13 oz. Packed box will weigh 3 lb. Sold as-is, not working, for parts and repair, no returns. The pictures below are of the turntable parts I am selling. Please e-mail any questions you might have before bidding. Packing materials, shipping and insurance at cost. Shipping quotes worldwide include insurance and packing materials. Legs measure 1 1/2” diameter, 2 1/2” tall, 3 1/2 to the top of the spring collar and weigh 3.8 oz. each. The total weight of all 3 is 13 oz.

International Buyers: I am offering eBay’s Global Shipping on this listing. This listing is for 1 vintage 1970s Transcriptors 60 Hz belt pulley for Skeleton and Saturn turntable used in the USA and Canada. etc. These turntables will work on both 110 and 220 voltages but use different motor/belt pulleys to run at the correct speed. The 60 HZ pulley is 3/4 in diameter at the widest. You must chose 1 from the 3 types below and ask for type 1, 2 or 3 when you make payment or through eBay email. U.S. models run on 110 volts, 60 Hz. If you bought a Skeleton or Saturn that was used in the UK or Europe and want to use it in the U.S. or Canada you must move the AC connector from 220 volts to 110 volts and replace the 50 Hz belt pulley with one of the 60 Hz ones shown below. Comes as shown, you will have to reuse the screw and adapter that is on the motor shaft or press type 3 directly on to the shaft. These are unused, new old stock items from the 1970s, not reproductions. I bought these parts directly from a Transcriptors distributor in Milwaukee, WI many years ago. As always, the pictures below are of the actual parts I am selling. Please e-mail any questions you might have before bidding. Shipping quotes in the U.S. and Global Shipping all come with insurance. The 60 Hz. pulleys are for these two types of turntables. You must chose 1 from the 3 types below and ask for type 1, 2 or 3 when you make payment or through eBay email. #1 is on the left, #2 in the center and #3 is on the right in the 6 photos below. See close-ups of each type below these pictures. Type #1 Type #2 Type #3

As always, I welcome International buyers. I offer Global Shipping and International Standard Delivery on this item. Set of 3 used leg housings and center shafts for a 1970s Transcriptors Skeleton turntable. Cosmetics are very good showing mostly minor wear from use/storage. Transcriptors made a few different type legs, be sure to compare the measurements and photos below, there are no returns. They come as shown and measure 1 1/2” diameter, 2 1/2” tall, 3 1/4 to the top of the threaded shaft and weigh 2.5 oz. each. The total weight of all 3 is 7.5 oz. Packed box will weigh 2 lb. Sold as-is, not working, for parts and repair, no returns. The pictures below are of the turntable parts I am selling. Please e-mail any questions you might have before bidding. Packing materials, shipping and insurance at cost. Shipping quotes worldwide include insurance and packing materials. Legs measure 1 1/2” diameter, 2 1/2” tall, 3 1/4 to the top of the threaded shaft and weigh 2.5 oz. each. The total weight of all 3 is 7.5 oz.

As always, I welcome International buyers. I offer Global Shipping and International Standard Delivery on this item. Choice of 1 Stay Rod Spring Housing for a 1970s Transcriptors Skeleton turntable. Cosmetics are excellent overall, there are some very minor scratches. From left to right in every photo below they measures 9/16, 1/2, 1/2 tall, all are 5/8 in diameter and all weighs .1 oz. All 3 are different, please look over the photos below and be sure to note in the payment or email which one you want. There are no returns for any reasons. Left to right in every photo below, #1 on the left, #2 in the center and #3 on the right. Weight of the packed box will be 12 oz. Sold as-is, not working, for parts and repair, no returns. The pictures below are of the turntable part I am selling. Please e-mail any questions you might have before bidding. Packing materials, shipping and insurance at cost. Shipping quotes worldwide include insurance and packing materials. Left to right in every photo below, #1 on the left, #2 in the center and #3 on the right. Buyer has the choice of one. These spring housings go with a stay rod assembly as shown in pictures below. None of these parts are included in the listing

Angeboten wird eine Originalhaube - nur die Haube ! - für Transcriptor mit geringen Gebrauchsspuren - ohne Kratzer oder BrücheMaße siehe Fotos ( bitte vor dem Kauf mit vorhandenen Maßen vergleichen )Bei Fragen bitte 0276-97315691

Transcriptors Saturn record turntable. Stunningly beautiful design by David Gammon in 1960, similar featured in the films :-A Clockwork Orange ( 1972)Creepshow (1982)X-Men- First Class (2011)The look of Love (2013)In wonderful condition, fully working. Complete with unscratched Acrylic Lid, and rare Transcriptor universal sweep arm ( see first three photos ). The photos are of the actual turntable which has been fitted with a new stylus.Owned and loved by me from the 1960s, a real piece of history. Probably the nicest you could find.Collection by buyer only. Located in Wrexham, North Wales.

New Old Stock Michell / Transcriptor Turntable Crouzet 240 V Synchronous Motor New Old Stock Crouzet 240 Volt 50 Hertz Synchronous Motor - Type 82-330 240 Volts 600 rpm. OEM Replacement for:Michell/Transcriptor Hydraulic Reference, Transcriptor Saturn and Michell Focus Turntables. They also fit the Michell Syncro and Michell Mycro. It will NOT fit the Electronic Reference, Prisma, Gyrodec Supplied with free basic fitting instructions (some disassembly of the original motor unit and soldering of two wires is required). This is a mains powered 240 Volt motor so for safety reasons it is recommended that the fitting is completed by a qualified electrician. Note: This is a 240 Volt motor .

Angeboten wird eine Originalhaube - nur die Haube ! - für Transcriptor mit geringen Gebrauchsspuren - ohne Kratzer oder BrücheMaße siehe Fotos ( bitte vor dem Kauf mit vorhandenen Maßen vergleichen )Bei Fragen bitte 0276-97315691

Here is a Michell Transcriptors hydraulic reference turntable. This is an earlier example (Transcriptors) with the more conventional feet, rather than the leaf sprung feet introduced by Michell when it took over production. Its this version of the deck that appeared in A Clockwork Orange. This example comes with the desirable squirrel hair sweep brush and stylus brush. It features the distinctive Transcriptor Fluid unipivot arm and is fitted with a basic Ortofon VMS 3E moving magnet cartridge of unknown usage. We have removed the old silicone from the speed adjustment bath under the platter and new silicone is provided for the new owner to install once home. Condition report: This turntable is in good condition, but its not perfect. There are marks here and there, but it generally looks tidy. The lid is complete and does not have any cracks or heavier scratches, but it isnt perfect. Wed describe the lid as very good, but not excellent. When the deck came to us the hydraulic fluid in the tonearm lowering mechanism had leaked out onto the plinth. Weve obviously cleaned this, but its not apparent how to recharge the lowering mechanism with new silicone... as such, it can be used to lift and lower the arm, but does not have the full damping effect you would expect. The motor cover plate was also missing the three original aluminium fixing nuts and weve found some modern ones to use (highlighted in one picture) but originals can be found to replace these should you wish. There was no makers plate on the plinth, and wed found a Transcriptors sticker which weve positioned in the correct position. It looks fine, but a new owner looking for originality might want to replace it and these can be found online. In use: We have set-up the tonearm and played this deck and, apart from speed fine tuning because of the lack of silicone in the bath under the platter, it is running well and consistently. The cartridge sounds OK but wed expect most new owners to replace this in due course. Summary: The Transcriptor decks look fantastic, and this is no exception. But they are also decks that require fettling and an enthusiastic owner who is prepared to understand how they work and make the necessary adjustments to optimise performance. We would not recommend them to someone with limited experience and knowledge. This deck is working and can be enjoyed, but we also think it could be taken to the next level of authenticity and performance by someone looking for a project. We do not have any original packaging for this deck and, due to the delicate nature of so many of the parts, we will not send via courier under any circumstance. This is strictly collection only. However, we do also drive around the country quite a bit, so may be able to deliver or meet you somewhere, but please ask whether this might be possible before you buy. The small print...The photographs show the actual item being sold. I use a studio to show the items in as much detail as possible. I must stress, that I have not serviced this item, just described its current cosmetic and operational condition as honestly as I can.

As always, I welcome International buyers. I offer eBays International Shipping on this item. Original tempered glass side for at least one model of the 1970s Transcriptors Skeleton Turntable. Cosmetics are excellent overall with just a few marks. Comes as shown in the pictures below. Be sure this is the size you need, there were at least 3 different sized glass side pieces used in the cases. Side glass plate measures 16 1/8 x 6 1/8 x 3/8 thick and weighs 1 lb., 6 oz. Weight of the packed box will be 4 lb. and will measure 20 x 10 x 3. Sold as-is, not working, for parts and repair, no returns. The pictures below are of the turntable part I am selling. Please excuse the ceiling fan images in the glass, they are unavoidable. Notice the Triplex stamp and 2 dimples on both sides near one edge of the panel, these are from the tool that holds the glass as it is toughened/hardened. All pieces of toughened glass made for Transcriptors have these 2 dimples. Very few have the Triplex stamp. Please e-mail any questions you might have before bidding. Shipping quotes worldwide include insurance and packing materials. Please excuse the ceiling fan images in the glass, they are unavoidable. Notice the 2 dimples, these are from the tool that holds the glass as it is toughened/hardened. All pieces of toughened glass made for Transcriptors have these 2 dimples. Very few have the Triplex stamp.

As always, I welcome International buyers. I offer eBays International Shipping on this item. Original tempered glass side for at least one model of the 1970s Transcriptors Skeleton Turntable. Cosmetics are excellent overall with just a few marks. Comes as shown in the pictures below. Be sure this is the size you need, there were at least 3 different sized glass side pieces used in the cases. Side glass plate measures 17 1/8 x 6 1/16 x 3/8 thick and weighs 1 lb., 7 oz. Weight of the packed box will be 4 lb. and will measure 22 x 10 x 3. Sold as-is, not working, for parts and repair, no returns. The pictures below are of the turntable part I am selling. Please excuse the ceiling fan images in the glass, they are unavoidable. Notice the Triplex sticker and stamp and 2 dimples on both sides near one edge of the panel, these are from the tool that holds the glass as it is toughened/hardened. All pieces of toughened glass made for Transcriptors have these 2 dimples. Very few have the Triplex stamp and only unused pieces have the stickers still on. Please e-mail any questions you might have before bidding. Shipping quotes worldwide include insurance and packing materials. Please excuse the ceiling fan images in the glass, they are unavoidable. Notice the Triplex sticker and stamp and 2 dimples on both sides near one edge of the panel, these are from the tool that holds the glass as it is toughened/hardened. All pieces of toughened glass made for Transcriptors have these 2 dimples. Very few have the Triplex stamp and only unused pieces have the stickers still on.

As always, I welcome International buyers. I offer Global Shipping and International Standard Delivery on this item. Set of 3 used leg housings and center shafts for a 1970s Transcriptors Skeleton turntable. Cosmetics are very good showing mostly minor wear from use/storage. Transcriptors made a few different type legs, be sure to compare the measurements and photos below, there are no returns. They come as shown and measure 1 1/2” diameter, 2 1/2” tall, 3 1/4 to the top of the threaded shaft and weigh 2.5 oz. each. The total weight of all 3 is 7.5 oz. Packed box will weigh 2 lb. Sold as-is, not working, for parts and repair, no returns. The pictures below are of the turntable parts I am selling. Please e-mail any questions you might have before bidding. Packing materials, shipping and insurance at cost. Shipping quotes worldwide include insurance and packing materials. Legs measure 1 1/2” diameter, 2 1/2” tall, 3 1/4 to the top of the threaded shaft and weigh 2.5 oz. each. The total weight of all 3 is 7.5 oz.

As always, I welcome International buyers. I offer Global Shipping and International Standard Delivery on this item. Choice of 1 Stay Rod Spring Housing for a 1970s Transcriptors Skeleton turntable. Cosmetics are excellent overall, there are some very minor scratches. From left to right in every photo below they measures 9/16, 1/2, 1/2 tall, all are 5/8 in diameter and all weighs .1 oz. All 3 are different, please look over the photos below and be sure to note in the payment or email which one you want. There are no returns for any reasons. Left to right in every photo below, #1 on the left, #2 in the center and #3 on the right. Weight of the packed box will be 12 oz. Sold as-is, not working, for parts and repair, no returns. The pictures below are of the turntable part I am selling. Please e-mail any questions you might have before bidding. Packing materials, shipping and insurance at cost. Shipping quotes worldwide include insurance and packing materials. Left to right in every photo below, #1 on the left, #2 in the center and #3 on the right. Buyer has the choice of one. These spring housings go with a stay rod assembly as shown in pictures below. None of these parts are included in the listing

As always, I welcome International buyers. I offer Global and International Standard Shipping on this item. One lot of 3 unused aluminum motor board caps/nuts/retainers for 1970s Transcriptors Skeleton turntable. Cosmetics are excellent plus. This listing is for one group of the 3 caps shown below. Transcriptors made 3 different sets of motor board caps/nuts/retainers for their Skeleton turntables over the years. I have only 1 of the 3 types they made that may be a match to your table. Sizes/features 3/8 diameter flat top, between 5/16 - 3/8 tall, smooth finish They all have the same thread size. Sold as-is, not working, for parts and repair, no returns. The pictures below are of the turntable parts I am selling. Please e-mail any questions you might have before bidding. Shipping quotes worldwide include insurance and packing materials. As always International Bidders are welcome to participate. Sizes/features 3/8 diameter flat top, between 5/16 - 3/8 tall, smooth finish They all have the same thread size. There are now 12 sets of 3 left, this bag is no longer this full. If you need them you might want to order as soon as possible before none are available.

International Buyers: I am offering eBay’s Global Shipping on this listing. This listing is for 1 vintage 1970s Transcriptors 60 Hz belt pulley for Skeleton and Saturn turntable used in the USA and Canada. etc. These turntables will work on both 110 and 220 voltages but use different motor/belt pulleys to run at the correct speed. The 60 HZ pulley is 3/4 in diameter at the widest. You must chose 1 from the 3 types below and ask for type 1, 2 or 3 when you make payment or through eBay email. U.S. models run on 110 volts, 60 Hz. If you bought a Skeleton or Saturn that was used in the UK or Europe and want to use it in the U.S. or Canada you must move the AC connector from 220 volts to 110 volts and replace the 50 Hz belt pulley with one of the 60 Hz ones shown below. Comes as shown, you will have to reuse the screw and adapter that is on the motor shaft or press type 3 directly on to the shaft. These are unused, new old stock items from the 1970s, not reproductions. I bought these parts directly from a Transcriptors distributor in Milwaukee, WI many years ago. As always, the pictures below are of the actual parts I am selling. Please e-mail any questions you might have before bidding. Shipping quotes in the U.S. and Global Shipping all come with insurance. The 60 Hz. pulleys are for these two types of turntables. You must chose 1 from the 3 types below and ask for type 1, 2 or 3 when you make payment or through eBay email. #1 is on the left, #2 in the center and #3 is on the right in the 6 photos below. See close-ups of each type below these pictures. Type #1 Type #2 Type #3

As always, I welcome International buyers. I offer Global Shipping and International Standard Delivery on this item. One stay rod spring and housing for a 1970s Transcriptors Skeleton turntable. Cosmetics are excellent and appear unused, new old stock. Spring measures just under 1/2 in diameter. This spring does not fit in the hole in every stay rod housing Transcritors made. This is why I am including the housing it does fit. There are no returns for any reasons. Sold as-is, not working, for parts and repair, no returns. The pictures below are of the turntable parts I am selling. Please e-mail any questions you might have before bidding. Packing materials, shipping and insurance at cost. Shipping quotes worldwide include insurance and packing materials. The spring and housing I am offering. This spring and housing goes with a stay rod assembly as shown in pictures below. None of these parts are included in the listing.

Angeboten wird eine Originalhaube - nur die Haube ! - für Transcriptor mit geringen Gebrauchsspuren - ohne Kratzer oder BrücheMaße siehe Fotos ( bitte vor dem Kauf mit vorhandenen Maßen vergleichen )Bei Fragen bitte 0276-97315691

Michell GyroDec Belt Drive Turntable, audiophile TT, j a michell, transcriptors. This has been one of my personal turntables for the last 20 years, I have multiple turntables from J A Michell so I’m just thinning the herd. Great audiophile table, comes with everything you need, ortofon red cartridge with lots of life left. To earn with the ground built into the rca’s Really awesome table I prefer local pick up in the NY tristate area as I do not have the original box to ship it in If you would need this shipped, please contact me for details and I’ll try to figure out what the cost would be

Transcriptor Saturn Turntable Sold For Restoration Or Parts Motor Working Very Quietly & Smooth Fitted With J A Michell Tone Arm Platter Makes Noise When Turning Drive Belt Quite Loose And Worn Condition As Seen In The Photos Lid Has Many Fine Marks & A Broken Hinge Being A Vintage Item There Are Marks & Signs Of Ageing Please Be Sure Of What You Are Buying As This Item Is Sold As Seen With No Returns The Turntable Will Be Very Well Packed And You Will Receive It Exactly As Seen In The Photos International Buyers Please Contact Us For An Accurate Shipping Quote