Anti Skating Weight Fadengewicht for Thorens Td 125 Tracking Arm TP25The description of this item has been automatically translated. If you have any questions, please feel free to contact us.THREAD WEIGHTAnti-skating weight for Thorens TD125 for tonearm TP25 THREAD WEIGHT Anti-skating weight for Thorens TD125 for tonearm TP25 Marke Thorens Angebotspaket Nein EAN Nicht zutreffend Modifizierter Artikel Nein Markenkompatibilität Thorens Herstellernummer nicht zutreffend Ausländisches Produkt Nein Herstellungsland und -region Deutschland Produktart Tonarm

Restored Thorens TD 125 Turntable With TP25 Tracking Arm RareThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220-240V/50Hz or 100-130V/60Hz (for example UNITED STATES)! RESTORED by ART-AND-SOUND Restored 125 with TP25 tonearm in blue ice metallicOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 52cm, depth: 41cm, height approx. 20cmHousing with rear connection strip for all required cable connections.The housing:The housing consists of 40mm MDF side panels and a 16mm thick base made of the same material. It is very elaborate with several layers of metallic paint sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum. Surface painted (blue ice metallic)The Ortofon OM 5E cartridge:With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 5E is the entry into the series and is a great entry-level system for mid-range turntables.The OM series from Ortofon is compatible with each other. So you can start with an OM 5E and then improve the quality with the appropriate needle insert by using the next needle insert.The audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions). New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood (to be placed on the frame): eBay-item number 143090566194The following parts are available as accessories and not included in this auction:dust covers (to put on the housing):    German eBay-article number is 143090566194Cartridge MM systems including installation:Ortofon 2M Red (elliptical): RRP €110 Ortofon 2M Blue (elliptical, naked): RRP €220 Ortofon 2M Bronze (fine line): RRP €360Ortofon OM 10 (elliptical): RRP €60Ortofon Vinyl Master Silver (Fritz Gyger): RRP €395Cartidge MC systems including installation:Ortofon MC 1 Turbo: RRP €220Ortofon MC 3 Turbo: RRP €380Quintet Red (elliptical): RRP €300Quinted Blue (fine line): RRP €430Quinted Bronze (Fritz Gyger): RRP €630The housing consists of 40mm MDF side panels and a 16mm thick base made of the same material. It is very elaborate with several layers of metallic paint sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 125 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Anti Skating Weight Fadengewicht for Thorens Td 125 Tracking Arm TP25The description of this item has been automatically translated. If you have any questions, please feel free to contact us.THREAD WEIGHTAnti-skating weight for Thorens TD125 for tonearm TP25 THREAD WEIGHT Anti-skating weight for Thorens TD125 for tonearm TP25 Marke Thorens Angebotspaket Nein EAN Nicht zutreffend Modifizierter Artikel Nein Markenkompatibilität Thorens Herstellernummer nicht zutreffend Ausländisches Produkt Nein Herstellungsland und -region Deutschland Produktart Tonarm

DescriptionAll items are shown in the pictures. If you cannot tell from the pictures please contact us. Due to differences in region codes some games CDs DVDs etc. may not ?be available. The voltage of some electrical products may be different. Please make sure to check before purchasing. PaymentPlease pay within 2 days of winning the auction. Shipping There have been delays in delivery due to the global pandemic. There may be a significant delay in the scheduled delivery date. Delivery Time Economy delivery? 3 to 4 weeks (Tracking numbers are not reflected in Australia Canada and some regions.) Standard delivery 2 to 3 weeks Terms of Sale If payment is not confirmed within 2 days of purchase the order will be cancelled. Returns are accepted within 60 days.International Buyers - Please Note: Import duties and taxes are not included in the item price or shipping cost. Please check with your countrys customs office for additional costs before bidding or purchasing. Duties and taxes are not collected by the shipping company. Please check with your countrys customs office for additional costs before bidding or purchasing. The act of declaring goods at a lower value or declaring goods as gifts is prohibited by international governments.

Item TitleThorens Td350/Tp250 Adopts Traditional Sub-Chassis Floating Structure japan Payment Supports managed payments Please pay within 5 days after auction is finished. About Us We are located in Japan. Its our pleasure to make you happy by proposing our recommend item. If you have any questions or request about items please feel free to ask us. International Buyers - Please Note: -Import duties taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. -Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. -These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. -We do not mark merchandise values below value or mark items as - gifts - The US and International government regulations prohibit such behavior. Thank you for your understanding.

DescriptionAll items are shown in the pictures. If you cannot tell from the pictures please contact us. Due to differences in region codes some games CDs DVDs etc. may not ?be available. The voltage of some electrical products may be different. Please make sure to check before purchasing. PaymentPlease pay within 2 days of winning the auction. Shipping There have been delays in delivery due to the global pandemic. There may be a significant delay in the scheduled delivery date. Delivery Time Economy delivery? 3 to 4 weeks (Tracking numbers are not reflected in Australia Canada and some regions.) Standard delivery 2 to 3 weeks Terms of Sale If payment is not confirmed within 2 days of purchase the order will be cancelled. Returns are accepted within 60 days.International Buyers - Please Note: Import duties and taxes are not included in the item price or shipping cost. Please check with your countrys customs office for additional costs before bidding or purchasing. Duties and taxes are not collected by the shipping company. Please check with your countrys customs office for additional costs before bidding or purchasing. The act of declaring goods at a lower value or declaring goods as gifts is prohibited by international governments.

Restored Thorens TD 125 Turntable With TP25 Tracking Arm RareThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220-240V/50Hz or 100-130V/60Hz (for example UNITED STATES)! RESTORED by ART-AND-SOUND Restored 125 with TP25 tonearm in blue ice metallicOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 52cm, depth: 41cm, height approx. 20cmHousing with rear connection strip for all required cable connections.The housing:The housing consists of 40mm MDF side panels and a 16mm thick base made of the same material. It is very elaborate with several layers of metallic paint sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum. Surface painted (blue ice metallic)The Ortofon OM 5E cartridge:With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 5E is the entry into the series and is a great entry-level system for mid-range turntables.The OM series from Ortofon is compatible with each other. So you can start with an OM 5E and then improve the quality with the appropriate needle insert by using the next needle insert.The audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions). New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood (to be placed on the frame): eBay-item number 143090566194The following parts are available as accessories and not included in this auction:dust covers (to put on the housing):    German eBay-article number is 143090566194Cartridge MM systems including installation:Ortofon 2M Red (elliptical): RRP €110 Ortofon 2M Blue (elliptical, naked): RRP €220 Ortofon 2M Bronze (fine line): RRP €360Ortofon OM 10 (elliptical): RRP €60Ortofon Vinyl Master Silver (Fritz Gyger): RRP €395Cartidge MC systems including installation:Ortofon MC 1 Turbo: RRP €220Ortofon MC 3 Turbo: RRP €380Quintet Red (elliptical): RRP €300Quinted Blue (fine line): RRP €430Quinted Bronze (Fritz Gyger): RRP €630The housing consists of 40mm MDF side panels and a 16mm thick base made of the same material. It is very elaborate with several layers of metallic paint sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 125 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Anti Skating Weight Fadengewicht for Thorens Td 125 Tracking Arm TP25The description of this item has been automatically translated. If you have any questions, please feel free to contact us.THREAD WEIGHTAnti-skating weight for Thorens TD125 for tonearm TP25 THREAD WEIGHT Anti-skating weight for Thorens TD125 for tonearm TP25 Marke Thorens Angebotspaket Nein EAN Nicht zutreffend Modifizierter Artikel Nein Markenkompatibilität Thorens Herstellernummer nicht zutreffend Ausländisches Produkt Nein Herstellungsland und -region Deutschland Produktart Tonarm

DescriptionAll items are shown in the pictures. If you cannot tell from the pictures please contact us. Due to differences in region codes some games CDs DVDs etc. may not ?be available. The voltage of some electrical products may be different. Please make sure to check before purchasing. PaymentPlease pay within 2 days of winning the auction. Shipping There have been delays in delivery due to the global pandemic. There may be a significant delay in the scheduled delivery date. Delivery Time Economy delivery? 3 to 4 weeks (Tracking numbers are not reflected in Australia Canada and some regions.) Standard delivery 2 to 3 weeks Terms of Sale If payment is not confirmed within 2 days of purchase the order will be cancelled. Returns are accepted within 60 days.International Buyers - Please Note: Import duties and taxes are not included in the item price or shipping cost. Please check with your countrys customs office for additional costs before bidding or purchasing. Duties and taxes are not collected by the shipping company. Please check with your countrys customs office for additional costs before bidding or purchasing. The act of declaring goods at a lower value or declaring goods as gifts is prohibited by international governments.

Restored Thorens TD 125 Turntable With TP25 Tracking Arm RareThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220-240V/50Hz or 100-130V/60Hz (for example UNITED STATES)! RESTORED and MODIFIED by ART-AND-SOUND Restored 125 with TP25 tonearm in blue ice metallicOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 52cm, depth: 41cm, height approx. 20cmHousing with rear connection strip for all required cable connections.The housing:The housing consists of 40mm MDF side panels and a 16mm thick base made of the same material. It is very elaborate with several layers of metallic paint sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum. Surface painted (blue ice metallic)The Ortofon OM 5E cartridge:With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 5E is the entry into the series and is a great entry-level system for mid-range turntables.The OM series from Ortofon is compatible with each other. So you can start with an OM 5E and then improve the quality with the appropriate needle insert by using the next needle insert.The audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions). New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood (to be placed on the frame): eBay-item number 143090566194The following parts are available as accessories and not included in this auction:dust covers (to put on the housing):    German eBay-article number is 143090566194Cartridge MM systems including installation:Ortofon 2M Red (elliptical): RRP €110 Ortofon 2M Blue (elliptical, naked): RRP €220 Ortofon 2M Bronze (fine line): RRP €360Ortofon OM 10 (elliptical): RRP €60Ortofon Vinyl Master Silver (Fritz Gyger): RRP €395Cartidge MC systems including installation:Ortofon MC 1 Turbo: RRP €220Ortofon MC 3 Turbo: RRP €380Quintet Red (elliptical): RRP €300Quinted Blue (fine line): RRP €430Quinted Bronze (Fritz Gyger): RRP €630The housing consists of 40mm MDF side panels and a 16mm thick base made of the same material. It is very elaborate with several layers of metallic paint sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modifizierter Artikel Ja Modell TD 125 Herstellernummer nicht zutreffend Ausländisches Produkt Ja Herstellungsland und -region Deutschland

Anti Skating Weight Fadengewicht for Thorens Td 125 Tracking Arm TP25The description of this item has been automatically translated. If you have any questions, please feel free to contact us.THREAD WEIGHTAnti-skating weight for Thorens TD125 for tonearm TP25 THREAD WEIGHT Anti-skating weight for Thorens TD125 for tonearm TP25 Marke Thorens Angebotspaket Nein EAN Nicht zutreffend Modifizierter Artikel Nein Markenkompatibilität Thorens Herstellernummer nicht zutreffend Ausländisches Produkt Nein Herstellungsland und -region Deutschland Produktart Tonarm

This turntable is available in 220-240V/50Hz or 100-130V/60Hz (for example UNITED STATES)! RESTORED and MODIFIED by ART-AND-SOUND Restored 125 with TP25 tonearm in blue ice metallicOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 52cm, depth: 41cm, height approx. 20cmHousing with rear connection strip for all required cable connections.The housing:The housing consists of 40mm MDF side panels and a 16mm thick base made of the same material. It is very elaborate with several layers of metallic paint sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum. Surface painted (blue ice metallic)The Ortofon OM 5E cartridge:With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 5E is the entry into the series and is a great entry-level system for mid-range turntables.The OM series from Ortofon is compatible with each other. So you can start with an OM 5E and then improve the quality with the appropriate needle insert by using the next needle insert.The audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions). New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood (to be placed on the frame): eBay-item number 143090566194The following parts are available as accessories and not included in this auction:dust covers (to put on the housing):    German eBay-article number is 143090566194Cartridge MM systems including installation:Ortofon 2M Red (elliptical): RRP €110 Ortofon 2M Blue (elliptical, naked): RRP €220 Ortofon 2M Bronze (fine line): RRP €360Ortofon OM 10 (elliptical): RRP €60Ortofon Vinyl Master Silver (Fritz Gyger): RRP €395Cartidge MC systems including installation:Ortofon MC 1 Turbo: RRP €220Ortofon MC 3 Turbo: RRP €380Quintet Red (elliptical): RRP €300Quinted Blue (fine line): RRP €430Quinted Bronze (Fritz Gyger): RRP €630The housing consists of 40mm MDF side panels and a 16mm thick base made of the same material. It is very elaborate with several layers of metallic paint sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight The housing consists of 40mm MDF side panels and a 16mm thick base made of the same material. It is very elaborate with several layers of metallic paint sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight

Restored Thorens TD 125 Turntable With TP25 Tracking Arm RareThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220-240V/50Hz or 100-130V/60Hz (for example UNITED STATES)! RESTORED and MODIFIED by ART-AND-SOUND Restored 125 with TP25 tonearm in blue ice metallicOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 52cm, depth: 41cm, height approx. 20cmHousing with rear connection strip for all required cable connections.The housing:The housing consists of 40mm MDF side panels and a 16mm thick base made of the same material. It is very elaborate with several layers of metallic paint sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum. Surface painted (blue ice metallic)The Ortofon OM 5E cartridge:With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 5E is the entry into the series and is a great entry-level system for mid-range turntables.The OM series from Ortofon is compatible with each other. So you can start with an OM 5E and then improve the quality with the appropriate needle insert by using the next needle insert.The audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions). New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood (to be placed on the frame): eBay-item number 143090566194The following parts are available as accessories and not included in this auction:dust covers (to put on the housing):    German eBay-article number is 143090566194Cartridge MM systems including installation:Ortofon 2M Red (elliptical): RRP €110 Ortofon 2M Blue (elliptical, naked): RRP €220 Ortofon 2M Bronze (fine line): RRP €360Ortofon OM 10 (elliptical): RRP €60Ortofon Vinyl Master Silver (Fritz Gyger): RRP €395Cartidge MC systems including installation:Ortofon MC 1 Turbo: RRP €220Ortofon MC 3 Turbo: RRP €380Quintet Red (elliptical): RRP €300Quinted Blue (fine line): RRP €430Quinted Bronze (Fritz Gyger): RRP €630The housing consists of 40mm MDF side panels and a 16mm thick base made of the same material. It is very elaborate with several layers of metallic paint sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modifizierter Artikel Ja Modell TD 125 Herstellernummer nicht zutreffend Ausländisches Produkt Ja Herstellungsland und -region Deutschland

Ich biete hier einen TD 125 MK I zum Verkauf an, da er leider viel zu selten genutzt wird und von einem TD 124 abgelöst wurde. Das Gerät wurde vom Vorbesitzer bei einem Thorens-Spezialisten überarbeitet, revidiert. Unter anderem wurden neue Kabel angebracht. Auch hat der Tonarm nicht das typische Problem des hängenden Schwänzchens. Auch wurde eine neue Abdeckhaube angebracht. Es ist ein Nagaoka MP 110 installiert. Auch eine originale Ersatznadel liegt mit bei. Im Lieferumfang sind sogar die original Garantiekarte, Anleitungen und die OVP. Wir sind ein Nichtraucherhaushalt. Es ist auf Grund der Empfindlichkeit nur eine Abholung möglich.Der Verkauf erfolgt unter Ausschluss jeglicher Gewähr­leistung

Anti Skating Weight Fadengewicht for Thorens Td 125 Tracking Arm TP25The description of this item has been automatically translated. If you have any questions, please feel free to contact us.THREAD WEIGHTAnti-skating weight for Thorens TD125 for tonearm TP25 THREAD WEIGHT Anti-skating weight for Thorens TD125 for tonearm TP25 Marke Thorens Angebotspaket Nein EAN Nicht zutreffend Modifizierter Artikel Nein Markenkompatibilität Thorens Herstellernummer nicht zutreffend Ausländisches Produkt Nein Herstellungsland und -region Deutschland Produktart Tonarm

DescriptionAll items are shown in the pictures. If you cannot tell from the pictures please contact us. Due to differences in region codes some games CDs DVDs etc. may not ?be available. The voltage of some electrical products may be different. Please make sure to check before purchasing. PaymentPlease pay within 2 days of winning the auction. Shipping There have been delays in delivery due to the global pandemic. There may be a significant delay in the scheduled delivery date. Delivery Time Economy delivery? 3 to 4 weeks (Tracking numbers are not reflected in Australia Canada and some regions.) Standard delivery 2 to 3 weeks Terms of Sale If payment is not confirmed within 2 days of purchase the order will be cancelled. Returns are accepted within 60 days.International Buyers - Please Note: Import duties and taxes are not included in the item price or shipping cost. Please check with your countrys customs office for additional costs before bidding or purchasing. Duties and taxes are not collected by the shipping company. Please check with your countrys customs office for additional costs before bidding or purchasing. The act of declaring goods at a lower value or declaring goods as gifts is prohibited by international governments.

Restored Thorens TD 125 Turntable With TP25 Tracking Arm RareThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220-240V/50Hz or 100-130V/60Hz (for example UNITED STATES)! RESTORED and MODIFIED by ART-AND-SOUND Restored 125 with TP25 tonearm in blue ice metallicOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 52cm, depth: 41cm, height approx. 20cmHousing with rear connection strip for all required cable connections.The housing:The housing consists of 40mm MDF side panels and a 16mm thick base made of the same material. It is very elaborate with several layers of metallic paint sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum. Surface painted (blue ice metallic)The Ortofon OM 5E cartridge:With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 5E is the entry into the series and is a great entry-level system for mid-range turntables.The OM series from Ortofon is compatible with each other. So you can start with an OM 5E and then improve the quality with the appropriate needle insert by using the next needle insert.The audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions). New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood (to be placed on the frame): eBay-item number 143090566194The following parts are available as accessories and not included in this auction:dust covers (to put on the housing):    German eBay-article number is 143090566194Cartridge MM systems including installation:Ortofon 2M Red (elliptical): RRP €110 Ortofon 2M Blue (elliptical, naked): RRP €220 Ortofon 2M Bronze (fine line): RRP €360Ortofon OM 10 (elliptical): RRP €60Ortofon Vinyl Master Silver (Fritz Gyger): RRP €395Cartidge MC systems including installation:Ortofon MC 1 Turbo: RRP €220Ortofon MC 3 Turbo: RRP €380Quintet Red (elliptical): RRP €300Quinted Blue (fine line): RRP €430Quinted Bronze (Fritz Gyger): RRP €630The housing consists of 40mm MDF side panels and a 16mm thick base made of the same material. It is very elaborate with several layers of metallic paint sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modifizierter Artikel Ja Modell TD 125 Herstellernummer nicht zutreffend Ausländisches Produkt Ja Herstellungsland und -region Deutschland

Restored Thorens TD 125 Turntable With TP25 Tracking Arm RareThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220-240V/50Hz or 100-130V/60Hz (for example USA)! RESTORED and MODIFIED by ART-AND-SOUND Restored 125 with TP25 tonearm in blue ice metallicOur turntables are lovingly assembled, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality cases are restored or newly manufactured in qualified craftsmanship.Electrical components are checked, moving parts oiled and wearing parts replaced.A final endurance test completes the complex work.The customer receives a top-class device.Item description:limit switch:     noinner plate: metalBearing mandrel: 10mm basic dimensions:            Width: 52cm, depth: 41cm, height approx. 20cmHousing with rear connection strip for all required cable connections.The case:The housing consists of 40mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of metallic paint sealed and polished with appropriate intermediate cuts. The connection panel for all required cable connections is located on the back.face plate:Cover plate made of 1mm aluminum. Surface lacquered (blue ice metallic)The cartridge Ortofon OM 5E:With the OM series, Ortofon has long since created the reference MM pickup, the long production time and the characteristic stylus body are well known all over the world. The OM 5E is the entry into the series and is a super entry-level system for medium-priced turntables.The OM series from Ortofon is compatible with each other. So you can start with an OM 5E and then improve the quality with the appropriate needle slot by using the next needle slot.The audio cable:brand cable. Ready-made analog audio cinch cable for wiring turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-nature signal transmission. Contact security and protection against corrosion is guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality.The turntable:The turntable is made in five laborious and time-consuming steps polished to a high gloss.The mirror finish gives your turntable a unique look.With surface sealing by a special protective coating against repeated tarnishing and for a long-lasting shine.Chromed stainless steel spikes:So that the turntable is decoupled from low-frequency vibrations, the chassis is equipped with height-adjustable spikes. Resonance and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured to the original Thorens specifications (same material and dimensions). New record weight made of stainless steel:With a weight of 310g, it ensures that the record lies flat on the platter and runs smoothly. This record weight plays in the middle weight class. It adds just enough weight to dampen plate vibration without stressing the bushings. The suspension of the Thorens sub-chassis has been readjusted accordingly. By using it, you increase the sound performance of your system. The following parts are as accessoriesuhright riseetcdaily and Not component this auction:Hood (to put on the frame): eBay-item number 143090566194the following parts are available like accessories other not included in this auction:dust cover (to put on the housing):    German eBay-article number is 143090566194Cartridge MM systems including installation:Ortofon 2M Red (elliptical): RRP €110 Ortofon 2M Blue (elliptical, naked): RRP €220 Ortofon 2M Bronze (fine line): RRP €360Ortofon OM 10 (elliptical): RRP €60Ortofon Vinyl Master Silver (Fritz Gyger): RRP €395Cartridge MC systems including installation:Ortofon MC 1 Turbo: RRP €220Ortofon MC 3 Turbo: RRP €380Quintet Red (elliptical): RRP €300Quinted Blue (fine line): RRP €430Quinted Bronze (Fritz Gyger): MSRP €630The housing consists of 40mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of metallic paint sealed and polished with appropriate intermediate cuts. The connection panel for all required cable connections is located on the back. brand cable. Ready-made analog audio cinch cable for wiring turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-nature signal transmission. Contact security and protection against corrosion is guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality. With a weight of 310g, it ensures that the record lies flat on the platter and runs smoothly. This record weight plaThe housing consists of 40mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of metallic paint sealed and polished with appropriate intermediate cuts. The connection panel for all required cable connections is located on the back. brand cable. Ready-made analog audio cinch cable for wiring turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-nature signal transmission. Contact security and protection against corrosion is guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality. With a weight of 310g, it ensures that the record lies flat on the platter and runs smoothly. This record weight pla Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modifizierter Artikel Ja Modell TD 125 Herstellernummer nicht zutreffend Ausländisches Produkt Ja Herstellungsland und -region Deutschland

Eines der besten Laufwerke, die je gebaut wurden bei Thorens. Jahrelang Referenz bei Ortofon gewesen.Meine ersten Thorense waren TD 115 und dann 125, 124 und 226. Haben mir und meinen Freunden viel Spaß gemacht.Nun läuft nur noch der TD 124 (allerdings in zwei Versionen), alles andere brauche ich nicht mehr. Zustand technisch wie optisch sehr gut.Keine Beschädigungen wie Kratzer.Auf Wunsch kann das Cinchkabel gegen ein zeitgemässes ausgetauscht werden, unterm Tonarmbrett ist eine Lötleiste dafür.Ich favorisiere Mogami 2804 und Little Wonder. Komplett montiert auf Tonarmbrett TD 125, eingestellt, geprüft.Wegen einer Anfrage: der EMT 929 ist 10mm länger und hat andere Steckverbindung am Headshell. Das Brett paßt daher nicht, der TP25 hat 230mm eff. - Lief mit Denon DL-103R- Mit Antiskating- und Hauptgewicht- Headshell, Zubehör Schrauben - Cinchkabel Thorens original- Alle Funktionen einwandfrei, Dämpfer Hauptgewicht ist kürzlich getauscht worden. Hängt nicht mehr runter. - Gereinigt, Kugel/Pfannen geölt und gemessen/klanglich geprüft, justiert auf minimales Spiel- Vorbereitet für Liftfunktion auf TD 125, Lift inkl. Mechanik ist noch im Laufwerk verbaut (Einbau mittels 2 Schrauben, einfach zu bewerkstelligen). Foto 4 ist nur zur INFO der Funktionsweise (Lift Option). Liftmechanik mit Baudenzug ist vorhanden, bei Sofortkauf ist der Lift inkl. Ich würde das Laufwerk (ebenfalls restauriert, mit Haube) auch verkaufen, aber dann nur mit Abholung. Das Laufwerk ist zu schwer, der Versand ein hohes Risiko. Die Liftmechanik mit Bautenzug gehört zum Laufwerk, nicht zum Tonarm. Ich kann das Laufwerk auch in Teilen verkaufen, alles ist vom Thorenstechniker im autorisierten Fachhandel (Lübeck) gemacht worden (inkl. Steuerplatine/Lämpchen/Schalter/Lager/Justage nach Servicemanual). Dafür fielen über 400 Euro an, Tonarm inbegriffen. Bezahlung nur Überweisung/Paypal ist auch möglich. Versand erfolgt doppelt verpackt als 10kg Paket DHL.Der Tonarm wird in eine Holzkiste mit Schaumstoff gepackt und zusätzlich in gepolsterten Pappkarton. Versandgewicht ca. 6,5-7 kg. Versandkosten Ausland bitte abfragen (EU 22-32€, weltweit nur mit Ausnahmen, zB. Japan 45€, USA US $ 55, China etc. bedingen Zollabfertigung, Kosten beim Empfänger). Dann auch NUR mit Paypal möglich, keine Überweisung. ***************** Foreign bidders: dont hesitate to ask for details prior bid. Condition technically and visually very good. No damages like scratches. If desired, the RCA cable can be exchanged for a contemporary one, under the tonearm board is a soldering strip for it. I favor Mogami 2804 and Little Wonder. Completely mounted on tonearm board TD 125, adjusted, tested. Without lifting bank and mechanics. Paypal only, please ask prior to bid for shipping cost/customs declaration and fee.

Original Headshell für TD150/TD125/TD124/TP13/TP14/TP25 Turtable/Plattenspieler/Tonarm von: THORENS TP50 Das angebotene Headshell befindet sich in einen Neuwertigen-Zustand!! Vollständig mit Schrauben + Kabel für Tonabnehmer-System, und ist Voll funktionsfähig!!! Sehr gut erhaltener Zustand!! Für weiteres bitte original Bilder anschauen!!!

Thorens TP50 Headshell Kopfstück für TP13 / TP14 / TP25 / TD150 / TD125 / TD124

Thorens TP50 Headshell Kopfstück für TP13 / TP14 / TP25 / TD150 / TD125 / TD124