Anti skate weight set of 3 matched weights for the Thorens TD-165, TD-166 and TD-146 turntables using the TP11 / 21 Tonearm. This triple set of anti skate weights has both the original small 0.6g and larger outer 2.0g weight plus an additional 1.4g outer weight all machined to match and accept the smaller weight to give a larger range of possible anti skate mass values. Possible combinations with this set are 0.6g, 1.4g, 2.0g, 2.1g and 2.6g These anti skate weights are made as a close replica of the originals. They are made to the correct mass value required but they my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the three anti skate weights and their monofilament lines only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and this set is also supplied with extra spare lines. *

1 Satz Original Thorens Antiskatinghalter für die Tonarme TP11 und TP21Altersgerechter guter Zustand - ohne Gewichte am Faden

Original Thorens TP63 Armwand With 2 original Thorens spacer 1.5mm and 2mm Perfect working condition, tested Very good cosmetic condition see pictures please Delivery with tracking Euopean union : 119 +690 shipping

On offer is a Schopper upgraded Thorens TP60 headshell in VGC.This headshell allows easy adjustment for overhang and azimuth.Fits the Thorens TP11 mk1 and Tp16 mk1 tonearms.The 10 grams weight is identical with the original TP60.Worldwide shipping available.

Das zweiteilige Antiskatinggewicht eines TP11 MKIII Tonarms. Etwas schmutzig aber Original

Anti skate weight set of 2 matched weights for the Thorens TD-165, TD-166 and TD-146 turntables using the TP11 / 21 Tonearm. The larger Outer weight and the small weight as mentioned in the manual which also can be combined together. I also produce a set of three weights which give a greater range of anti skate mass values please look at my other listing. These anti skate weights are made as a close replica of the originals. They are made to the correct mass value required but they my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the pair of anti skate weights and their monofilament lines only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and this set is also supplied with spare lines. *

Anti skate weight set of 3 matched weights for the Thorens TD-165, TD-166 and TD-146 turntables using the TP11 / 21 Tonearm. This triple set of anti skate weights has both the original small 0.6g and larger outer 2.0g weight plus an additional 1.4g outer weight all machined to match and accept the smaller weight to give a larger range of possible anti skate mass values. Possible combinations with this set are 0.6g, 1.4g, 2.0g, 2.1g and 2.6g These anti skate weights are made as a close replica of the originals. They are made to the correct mass value required but they my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the three anti skate weights and their monofilament lines only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and this set is also supplied with extra spare lines. *

Anti skate weight set of 2 matched weights for the Thorens TD-165, TD-166 and TD-146 turntables using the TP11 / 21 Tonearm. The larger Outer weight and the small weight as mentioned in the manual which also can be combined together. I also produce a set of three weights which give a greater range of anti skate mass values please look at my other listing. These anti skate weights are made as a close replica of the originals. They are made to the correct mass value required but they my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the pair of anti skate weights and their monofilament lines only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and this set is also supplied with spare lines. *

Anti skate weight set of 3 matched weights for the Thorens TD-165, TD-166 and TD-146 turntables using the TP11 / 21 Tonearm. This triple set of anti skate weights has both the original small 0.6g and larger outer 2.0g weight plus an additional 1.4g outer weight all machined to match and accept the smaller weight to give a larger range of possible anti skate mass values. Possible combinations with this set are 0.6g, 1.4g, 2.0g, 2.1g and 2.6g These anti skate weights are made as a close replica of the originals. They are made to the correct mass value required but they my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the three anti skate weights and their monofilament lines only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and this set is also supplied with extra spare lines. *

Anti skate weight set of 2 matched weights for the Thorens TD-165, TD-166 and TD-146 turntables using the TP11 / 21 Tonearm. The larger Outer weight and the small weight as mentioned in the manual which also can be combined together. I also produce a set of three weights which give a greater range of anti skate mass values please look at my other listing. These anti skate weights are made as a close replica of the originals. They are made to the correct mass value required but they my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the pair of anti skate weights and their monofilament lines only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and this set is also supplied with spare lines. *

Anti skate weight set of 3 matched weights for the Thorens TD-165, TD-166 and TD-146 turntables using the TP11 / 21 Tonearm. This triple set of anti skate weights has both the original small 0.6g and larger outer 2.0g weight plus an additional 1.4g outer weight all machined to match and accept the smaller weight to give a larger range of possible anti skate mass values. Possible combinations with this set are 0.6g, 1.4g, 2.0g, 2.1g and 2.6g These anti skate weights are made as a close replica of the originals. They are made to the correct mass value required but they my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the three anti skate weights and their monofilament lines only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and this set is also supplied with extra spare lines. *

UP FOR SALE IS A ORIGINAL THORENS ANTI SKATING WEIGHT ARM TP11 TP21-TD 146 166 165 316 310 PLEASE SEE PICTURES, ANY QS PLEASE ASK. U.S. SHIPPING ONLY, THANK YOU

Anti skate weight set of 3 matched weights for the Thorens TD-165, TD-166 and TD-146 turntables using the TP11 / 21 Tonearm. This triple set of anti skate weights has both the original small 0.6g and larger outer 2.0g weight plus an additional 1.4g outer weight all machined to match and accept the smaller weight to give a larger range of possible anti skate mass values. Possible combinations with this set are 0.6g, 1.4g, 2.0g, 2.1g and 2.6g These anti skate weights are made as a close replica of the originals. They are made to the correct mass value required but they my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the three anti skate weights and their monofilament lines only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and this set is also supplied with extra spare lines. *

Anti skate weight set of 2 matched weights for the Thorens TD-165, TD-166 and TD-146 turntables using the TP11 / 21 Tonearm. The larger Outer weight and the small weight as mentioned in the manual which also can be combined together. I also produce a set of three weights which give a greater range of anti skate mass values please look at my other listing. These anti skate weights are made as a close replica of the originals. They are made to the correct mass value required but they my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the pair of anti skate weights and their monofilament lines only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and this set is also supplied with spare lines. *

Anti skate weight set of 2 matched weights for the Thorens TD-165, TD-166 and TD-146 turntables using the TP11 / 21 Tonearm. The larger Outer weight and the small weight as mentioned in the manual which also can be combined together. I also produce a set of three weights which give a greater range of anti skate mass values please look at my other listing. These anti skate weights are made as a close replica of the originals. They are made to the correct mass value required but they my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the pair of anti skate weights and their monofilament lines only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and this set is also supplied with spare lines. *

Anti skate weight set of 3 matched weights for the Thorens TD-165, TD-166 and TD-146 turntables using the TP11 / 21 Tonearm. This triple set of anti skate weights has both the original small 0.6g and larger outer 2.0g weight plus an additional 1.4g outer weight all machined to match and accept the smaller weight to give a larger range of possible anti skate mass values. Possible combinations with this set are 0.6g, 1.4g, 2.0g, 2.1g and 2.6g These anti skate weights are made as a close replica of the originals. They are made to the correct mass value required but they my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the three anti skate weights and their monofilament lines only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and this set is also supplied with extra spare lines. *

Die Basis eines TP11 MKIII Tonarms mit einigen Kleinteilen, wie auf den Bildern ersichtlich. Inkl. Anschluss -und ErdungskabelZustand einwandfrei - Umfang auf den Bildern ersichtlich

Thorens TP11 Turntable Tonearm in great condition This one comes from a TD165 and worked perfectly. Feel free to ask any questions Will ship worldwide with tracking and insurance only

Anti skate weight set of 2 matched weights for the Thorens TD-165, TD-166 and TD-146 turntables using the TP11 / 21 Tonearm. The larger Outer weight and the small weight as mentioned in the manual which also can be combined together. I also produce a set of three weights which give a greater range of anti skate mass values please look at my other listing. These anti skate weights are made as a close replica of the originals. They are made to the correct mass value required but they my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the pair of anti skate weights and their monofilament lines only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and this set is also supplied with spare lines. *

Anti skate weight set of 3 matched weights for the Thorens TD-165, TD-166 and TD-146 turntables using the TP11 / 21 Tonearm. This triple set of anti skate weights has both the original small 0.6g and larger outer 2.0g weight plus an additional 1.4g outer weight all machined to match and accept the smaller weight to give a larger range of possible anti skate mass values. Possible combinations with this set are 0.6g, 1.4g, 2.0g, 2.1g and 2.6g These anti skate weights are made as a close replica of the originals. They are made to the correct mass value required but they my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the three anti skate weights and their monofilament lines only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and this set is also supplied with extra spare lines. *