Original Thorens Tonarmbasis TP11 MKII

THORENS TP-11 TP11Tonearm Tone Arm Assembly for TD-165 Turntable- Complete with Counter Balance Weight-May Fit Others- ZERO FEEDBACK BIDDERS ARE MOST WELCOMED. BEGIN YOUR E-BAY SHOPPING EXPERIENCE WITH US - AUCTION IS NOT OPEN TO INTERNATIONAL BIDDERS DUE TO HIGH SHIPPING (US/CANADA) SALE ONLY. SHIPPING TO HAWAII/APO/FPO/GUAM AT NO EXTRA CHARGE. - BUY WITH FULL CONFIDENCE -WE TAKE RESPONSIBILITIES IF ITEMS ARE LOST OR DAMAGED DURING SHIPPING- NO QUESTION ASKED - Complete set. Maximum length of wires saved to facilitate easy installation. This is not a duplicate listing. We have multiple arms for sale. -Selling as parts or restoration. Will be expertly packed. Came from a THORENS TD-165 Turntable but might fit on other models. -We have daily shipping going to all parts of USA Canada including APO FPO PUERTO RICO GUAM NEW MEXICO and even to Virgin islands. Hope you would buy something from us that would bring smile on you - Not any regret. If you are tired of having bad experiences on E-bay shopping with DOA, Item damaged during transit, poor post-sale customer service-You have come to the right place. We hope we would be able to regain your shopping experience and confidence on E-bay. It would be most securely boxed. Rest assured about our packing-Thats the thing we take pride-in Canadian Buyers - eBay collects HST on behalf of the Canadian government.- - American Buyers - Ebay is collecting State sales tax on behalf of the American government. However, we will offer discount on shipping, case by case, to stay competitive and minimize your total cost of buying. BUY WITH CONFIDENCE. ... PACKING (NEW DIMENSION IN CUSTOM PACKING) This is the final concluding part of a perfect deal and therefore, we take each packing job as a challenge... You will see each of our packing a piece of art. THANKS FOR LOOKING AND HAPPY SHOPPING . Check out my other items!

Original Headshell für TP11/TP16/TD160/TD166/TD165/TD145/TD147 Turtable/Plattenspieler/Tonarm von: THORENS TP60 Das angebotene Headshell befindet sich in einen Neuwertigen-Zustand!! Vollständig mit Schrauben + Kabel für Tonabnehmer-System, und ist Voll funktionsfähig!!! Sehr gut erhaltener Zustand!! Für weiteres bitte original Bilder anschauen!!!

Original - THORENS FADENGEWICHT Thorens Anti-Skating Gewicht 2g für Tonarm TP11 / TP21 passend für Plattenspieler: Thorens TD 146 / 165 / 166 / 316 / 318 Das Antiskating Gewicht ist 2-teilig.

Original Thorens Anti-skating Poids 2g Tonarm TP21 TP11 Td 146 166 165 316 318Cette fiche produit a été automatiquement traduite. Si vous avez des questions, n’hésitez pas à nous contacter.Original - POIDS DE FILET THORENSMasse anti-patinage Thorens 2g pour bras TP11 / TP21  adapté aux tourne-disques: 146 / 165 / 166 / 316 / 318Le poids anti-patinage est en 2 parties.Original - POIDS DE FILET THORENS Masse anti-patinage Thorens 2g pour bras TP11 / TP21  adapté aux tourne-disques: 146 / 165 / 166 / 316 / 318 Le poids anti-patinage est en 2 parties. Marke Thorens Angebotspaket Nein EAN Nicht zutreffend Modifizierter Artikel Nein Markenkompatibilität Thorens Herstellernummer nicht zutreffend Ausländisches Produkt Nein Herstellungsland und -region Deutschland Produktart Tonarm

Original Thorens anti Skating Weight 0.0705oz Arm TP21 TP11 Td 146 166 165 316The description of this item has been automatically translated. If you have any questions, please feel free to contact us.Original - THORENS THREAD WEIGHTThorens anti-skating weight 2g for tonearm TP11 / TP21  suitable for record players: 146 / 165 / 166 / 316 / 318The anti-skating weight is in 2 parts.Original - THORENS THREAD WEIGHT Thorens anti-skating weight 2g for tonearm TP11 / TP21  suitable for record players: 146 / 165 / 166 / 316 / 318 The anti-skating weight is in 2 parts. Marke Thorens Angebotspaket Nein EAN Nicht zutreffend Modifizierter Artikel Nein Markenkompatibilität Thorens Herstellernummer nicht zutreffend Ausländisches Produkt Nein Herstellungsland und -region Deutschland Produktart Tonarm

Original - THORENS FADENGEWICHTThorens Anti-Skating Gewicht 2g für Tonarm TP11 / TP21  passend für Plattenspieler: 146 / 165 / 166 / 316 / 318Das Antiskating Gewicht ist 2-teilig.Original - THORENS FADENGEWICHT Thorens Anti-Skating Gewicht 2g für Tonarm TP11 / TP21  passend für Plattenspieler: 146 / 165 / 166 / 316 / 318 Das Antiskating Gewicht ist 2-teilig.

1 Satz Original Thorens Antiskatinghalter für die Tonarme TP11 und TP21Altersgerechter guter Zustand - ohne Gewichte am Faden

Anti skate weight set of 2 matched weights for the Thorens TD-165, TD-166 and TD-146 turntables using the TP11 / 21 Tonearm. The larger Outer weight and the small weight as mentioned in the manual which also can be combined together. I also produce a set of three weights which give a greater range of anti skate mass values please look at my other listing. These anti skate weights are made as a close replica of the originals. They are made to the correct mass value required but they my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the pair of anti skate weights and their monofilament lines only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and this set is also supplied with spare lines. *

Anti skate weight set of 3 matched weights for the Thorens TD-165, TD-166 and TD-146 turntables using the TP11 / 21 Tonearm. This triple set of anti skate weights has both the original small 0.6g and larger outer 2.0g weight plus an additional 1.4g outer weight all machined to match and accept the smaller weight to give a larger range of possible anti skate mass values. Possible combinations with this set are 0.6g, 1.4g, 2.0g, 2.1g and 2.6g These anti skate weights are made as a close replica of the originals. They are made to the correct mass value required but they my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the three anti skate weights and their monofilament lines only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and this set is also supplied with extra spare lines. *

1 Satz Original Thorens Antiskatinghalter für die Tonarme TP11 und TP21Altersgerechter guter Zustand - ohne Gewichte am Faden

Original Thorens TP63 Armwand With 2 original Thorens spacer 1.5mm and 2mm Perfect working condition, tested Very good cosmetic condition see pictures please Delivery with tracking Euopean union : 119 +690 shipping

On offer is a Schopper upgraded Thorens TP60 headshell in VGC.This headshell allows easy adjustment for overhang and azimuth.Fits the Thorens TP11 mk1 and Tp16 mk1 tonearms.The 10 grams weight is identical with the original TP60.Worldwide shipping available.

Das zweiteilige Antiskatinggewicht eines TP11 MKIII Tonarms. Etwas schmutzig aber Original

Anti skate weight set of 2 matched weights for the Thorens TD-165, TD-166 and TD-146 turntables using the TP11 / 21 Tonearm. The larger Outer weight and the small weight as mentioned in the manual which also can be combined together. I also produce a set of three weights which give a greater range of anti skate mass values please look at my other listing. These anti skate weights are made as a close replica of the originals. They are made to the correct mass value required but they my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the pair of anti skate weights and their monofilament lines only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and this set is also supplied with spare lines. *

Anti skate weight set of 3 matched weights for the Thorens TD-165, TD-166 and TD-146 turntables using the TP11 / 21 Tonearm. This triple set of anti skate weights has both the original small 0.6g and larger outer 2.0g weight plus an additional 1.4g outer weight all machined to match and accept the smaller weight to give a larger range of possible anti skate mass values. Possible combinations with this set are 0.6g, 1.4g, 2.0g, 2.1g and 2.6g These anti skate weights are made as a close replica of the originals. They are made to the correct mass value required but they my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the three anti skate weights and their monofilament lines only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and this set is also supplied with extra spare lines. *

Anti skate weight set of 2 matched weights for the Thorens TD-165, TD-166 and TD-146 turntables using the TP11 / 21 Tonearm. The larger Outer weight and the small weight as mentioned in the manual which also can be combined together. I also produce a set of three weights which give a greater range of anti skate mass values please look at my other listing. These anti skate weights are made as a close replica of the originals. They are made to the correct mass value required but they my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the pair of anti skate weights and their monofilament lines only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and this set is also supplied with spare lines. *

Anti skate weight set of 3 matched weights for the Thorens TD-165, TD-166 and TD-146 turntables using the TP11 / 21 Tonearm. This triple set of anti skate weights has both the original small 0.6g and larger outer 2.0g weight plus an additional 1.4g outer weight all machined to match and accept the smaller weight to give a larger range of possible anti skate mass values. Possible combinations with this set are 0.6g, 1.4g, 2.0g, 2.1g and 2.6g These anti skate weights are made as a close replica of the originals. They are made to the correct mass value required but they my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the three anti skate weights and their monofilament lines only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and this set is also supplied with extra spare lines. *

Anti skate weight set of 2 matched weights for the Thorens TD-165, TD-166 and TD-146 turntables using the TP11 / 21 Tonearm. The larger Outer weight and the small weight as mentioned in the manual which also can be combined together. I also produce a set of three weights which give a greater range of anti skate mass values please look at my other listing. These anti skate weights are made as a close replica of the originals. They are made to the correct mass value required but they my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the pair of anti skate weights and their monofilament lines only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and this set is also supplied with spare lines. *

Anti skate weight set of 3 matched weights for the Thorens TD-165, TD-166 and TD-146 turntables using the TP11 / 21 Tonearm. This triple set of anti skate weights has both the original small 0.6g and larger outer 2.0g weight plus an additional 1.4g outer weight all machined to match and accept the smaller weight to give a larger range of possible anti skate mass values. Possible combinations with this set are 0.6g, 1.4g, 2.0g, 2.1g and 2.6g These anti skate weights are made as a close replica of the originals. They are made to the correct mass value required but they my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the three anti skate weights and their monofilament lines only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and this set is also supplied with extra spare lines. *

UP FOR SALE IS A ORIGINAL THORENS ANTI SKATING WEIGHT ARM TP11 TP21-TD 146 166 165 316 310 PLEASE SEE PICTURES, ANY QS PLEASE ASK. U.S. SHIPPING ONLY, THANK YOU

Anti skate weight set of 3 matched weights for the Thorens TD-165, TD-166 and TD-146 turntables using the TP11 / 21 Tonearm. This triple set of anti skate weights has both the original small 0.6g and larger outer 2.0g weight plus an additional 1.4g outer weight all machined to match and accept the smaller weight to give a larger range of possible anti skate mass values. Possible combinations with this set are 0.6g, 1.4g, 2.0g, 2.1g and 2.6g These anti skate weights are made as a close replica of the originals. They are made to the correct mass value required but they my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the three anti skate weights and their monofilament lines only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and this set is also supplied with extra spare lines. *

Anti skate weight set of 2 matched weights for the Thorens TD-165, TD-166 and TD-146 turntables using the TP11 / 21 Tonearm. The larger Outer weight and the small weight as mentioned in the manual which also can be combined together. I also produce a set of three weights which give a greater range of anti skate mass values please look at my other listing. These anti skate weights are made as a close replica of the originals. They are made to the correct mass value required but they my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the pair of anti skate weights and their monofilament lines only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and this set is also supplied with spare lines. *

Anti skate weight set of 2 matched weights for the Thorens TD-165, TD-166 and TD-146 turntables using the TP11 / 21 Tonearm. The larger Outer weight and the small weight as mentioned in the manual which also can be combined together. I also produce a set of three weights which give a greater range of anti skate mass values please look at my other listing. These anti skate weights are made as a close replica of the originals. They are made to the correct mass value required but they my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the pair of anti skate weights and their monofilament lines only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and this set is also supplied with spare lines. *