Ich verkaufe einige Thorens Ersatzteile: I only ship within the EU. Not to USA UK Australia Russia India Asia... Thorens Schalter / Tonarm Lift System (Absenkvorrichtung) THORENS TP 90 TD 160 MKV 320 MKII MKIII Wie auf dem Bild zu sehen, ist dieser sehr gut erhalten und voll funktionfähig. ANFRAGEN NACH ANDEREN ERSATZTEILEN ODER PREISANGEBOTE BITTE PER MAIL oder telefonisch ab 20:00 Uhr Gewerbliches Angebot. Lieferung erfolgt gem. Fernabsatzgesetz. Siehe Widerrufsbelehrung.

Revised Thorens TD125 Turntable With Original TP16 Tracking Arm - Sme OptionalThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.ATTENTION: This offer does not contain an SME tonearm (optional), but the original Thorens TP16 tonearmIndividual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220/230V, 50Hz or 110/120V, 60Hz (for example USA or world wide) Restored Thorens TD125 or 125 MKII in black burgundy red metallicwith original Thorens TP16 tonearm and Ortofon VinylMaster Alpha as a pickup(Artieklfotos show an SME 3009 Series II with Ortofon 2M blue)Various SME tonearms are optionally possible Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Item description:Tonearm: Thorens TP16Pickup:          Ortofon VinylMaster AlphaLimit switch:      NoInner plate: metalPlate bearing:               10mmDevice feet:              height-adjustable spikesBasic dimensions:             Width: 525mm, depth: 413mm, height 97mmThe following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of an endurance testHousing:The housing consists of 40mm side panels and a 16mm thick MDF base. The surface was painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed.Device feet:There are four height-adjustable ones on the bottom of the case SPIKES Installed from chrome-plated stainless steel. The base is screwed to the frame and can be easily removed.Ortofon VM Alpha cartridge (included):With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine. The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. --The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood:for placing on the housing: 160,- XXL device feet (pictures 13, 14 and 15): 90,-Height adjustable, made of stainless steel. Total weight 2520g, diameter 65mm, height 26mmSME tonearms (the matching systems are selected according to the tonearms): SME Series III (replaceable tonearm tube, eff. Weight approx. 5g): 499,- SME 3009 improved (fixed headshell, eff. Mass 6.5g): 499,- SME 3009 S2 improved (replaceable headshell, eff. Weight 9.5g): 499,- SME 3009 Series II (replaceable headshell, eff. Weight 12.5g): 799,- Cartridge MM system including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339,- AUDIO-TECHNICA VM 750 SH (Shibata): 439,- AUDIO-TECHNICA VM 760 SLC (special line): 699,-Ortofon 2M Red (elliptical): 109,-Ortofon 2M Blue (elliptical, naked): 229,-Ortofon 2M Bronze (Fineline): 390,-Ortofon 2M Black (Shibata): 599,-Ortofon 2M Black LVB 250 (Shibata with boron needle carrier): 899,- Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330,- ORTOFON Quintet Blue (elliptical, naked): 470,- ORTOFON Quintet Bronze (Fineline): 660,- ORTOFON Quinted Black (Shibata): 940,- ORTOFON Cadenza Red (Fineline): 1299,- AUDIO-TECHNICA AT-OC9XEB (elliptical): 279,-AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369,- AUDIO-TECHNICA AT-33EV (elliptical): 499,-AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599,-AUDIO-TECHNICA AT-33SA (Shibata): 799,-With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Farbe schwarz , bordeaux rot metallic Modell TD125 oder TD125 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Original Headshell Thorens for TP16 DefectiveThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Original Thorens headshell Condition: a thread for the mounting screw is defective, the plug connector for the tonearm is not available (see photos) Original Thorens headshell Condition: a thread for the mounting screw is defective, the plug connector for the tonearm is not available (see photos) Herstellernummer nicht zutreffend Marke Thorens Markenkompatibilität Für Thorens Produktart Headshell EAN Nicht zutreffend

Original Thorens TD... Tonarm TP 16 mit Tonarmlift Tonarminnenverkabelung defekt, Zustand siehe Fotos ohne Gegengewicht, ohne Tonarmdeckel ( siehe Fotos9

Original Thorens Td Tone Arm Tp 16 With Lift Tonarminnenverkabelung DefectiveThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Original ... Tonearm TP 16 with tonearm liftTonearm internal wiring defective, see photos for condition  without counterweight, without tonearm cover (see photos9 Original ... Tonearm TP 16 with tonearm lift Tonearm internal wiring defective, see photos for condition   without counterweight, without tonearm cover (see photos9 Herstellernummer nicht zutreffend Marke Thorens Markenkompatibilität Für Thorens Produktart Tonarm EAN Nicht zutreffend

ATTENTION: This offer does not contain an SME tonearm (optional), but the original Thorens TP16 tonearmIndividual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220/230V, 50Hz or 110/120V, 60Hz (for example USA or world wide) Restored Thorens TD125 or 125 MKII in black burgundy red metallicwith original Thorens TP16 tonearm and Ortofon VinylMaster Alpha as a pickup(Artieklfotos show an SME 3009 Series II with Ortofon 2M blue)Various SME tonearms are optionally possible Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Item description:Tonearm: Thorens TP16Pickup:          Ortofon VinylMaster AlphaLimit switch:      NoInner plate: metalPlate bearing:               10mmDevice feet:              height-adjustable spikesBasic dimensions:             Width: 525mm, depth: 413mm, height 97mmThe following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of an endurance testHousing:The housing consists of 40mm side panels and a 16mm thick MDF base. The surface was painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed.Device feet:There are four height-adjustable ones on the bottom of the case SPIKES Installed from chrome-plated stainless steel. The base is screwed to the frame and can be easily removed.Ortofon VM Alpha cartridge (included):With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine. The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. --The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood:for placing on the housing: 160,- XXL device feet (pictures 13, 14 and 15): 90,-Height adjustable, made of stainless steel. Total weight 2520g, diameter 65mm, height 26mmSME tonearms (the matching systems are selected according to the tonearms): SME Series III (replaceable tonearm tube, eff. Weight approx. 5g): 499,- SME 3009 improved (fixed headshell, eff. Mass 6.5g): 499,- SME 3009 S2 improved (replaceable headshell, eff. Weight 9.5g): 499,- SME 3009 Series II (replaceable headshell, eff. Weight 12.5g): 799,- Cartridge MM system including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339,- AUDIO-TECHNICA VM 750 SH (Shibata): 439,- AUDIO-TECHNICA VM 760 SLC (special line): 699,-Ortofon 2M Red (elliptical): 109,-Ortofon 2M Blue (elliptical, naked): 229,-Ortofon 2M Bronze (Fineline): 390,-Ortofon 2M Black (Shibata): 599,-Ortofon 2M Black LVB 250 (Shibata with boron needle carrier): 899,- Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330,- ORTOFON Quintet Blue (elliptical, naked): 470,- ORTOFON Quintet Bronze (Fineline): 660,- ORTOFON Quinted Black (Shibata): 940,- ORTOFON Cadenza Red (Fineline): 1299,- AUDIO-TECHNICA AT-OC9XEB (elliptical): 279,-AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369,- AUDIO-TECHNICA AT-33EV (elliptical): 499,-AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599,-AUDIO-TECHNICA AT-33SA (Shibata): 799,-With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By