Normal 0 21 false false false DE X-NONE X-NONE Thorens Motor Antrieb 16V 50Hz für Thorens Plattenspieler Technisch und optisch einwandfrei. Ausgebaut aus einem TD147(passt auch zum TD146, TD166MKII und einigen TD160 Varianten) für 16V / 50Hz Dieser Artikel unterliegt gem. § 25a UStG der Differenzbesteuerung, ein Ausweis der Mehrwertsteuer auf der Rechnung erfolgt nicht.

Restaurierter Thorens TD147 Turntable With Vogelaugenfurnier BlackThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound Germany Restored Thorens TD-147 stainless steel,Black birds eye veneer with high-gloss finishAlso possible with different SME tonearms.Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Item description:Limit switch:    YesInner plate:             metalSpindle: 10mm Basic dimensions:            Width: 54cm, depth: 45cm, height 15cmSpecial feature:           Chassis and sub-chassis with acoustic matHousing:The housing is made of MDF and consists of two individual parts, the housing and the housing base. They are connected to each other using screws. It was professionally finished with several coats of high gloss varnish sealed and polished with appropriate intermediate sanding. This makes the surface extremely scratch-resistant. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm brushed and demagnetized stainless steel with labeling for both switches.Ortofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable: Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Large power supply:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply.Performance bottlenecks and heating no longer occur. Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Hood to be placed on the substructure: 170Cartridge MM system including installation:Ortofon 2M Red Verso (elliptical): 110 Ortofon 2M Blue Verso (elliptical, naked): 240 Ortofon 2M Bronze Verso (Fineline): 390Ortofon 2M Black Verso (Shibata): 599Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699 Cartridge MC system including installation:Audio-technica AT-OC9XEB (elliptical): 279Audio-technica AT-OC9XEN (elliptical, naked): 369Audio-technica AT33EV(elliptical, naked): 499Audio-technica ATPTG/II (microlinear): 599Audio-technica AT33SA (Shibata): 799 The housing is made of MDF and consists of two individual parts, the housing and the housing base. They are connected to each other using screws. It was professionally finished with several coats of high gloss varnish sealed and polished with appropriate intermediate sanding. This makes the surface extremely scratch-resistant. The connection panel for all required cable connections is located on the back. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your Herstellernummer nicht zutreffend Marke Restaurierter Thorens EAN Nicht zutreffend Modell TD 147

Restaurierter Thorens TD147 Turntable With Vogelaugenfurnier IN Dark BlueThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound Germany Restored Thorens TD-147 stainless steel, dark blue birds eye veneer with high-gloss finishAlso possible with different SME tonearms.Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Item description:Limit switch:    YesInner plate:             metalSpindle: 10mm Basic dimensions:            Width: 54cm, depth: 45cm, height 15cmSpecial feature:           Chassis and sub-chassis with acoustic matHousing:The housing is made of MDF and consists of two individual parts, the housing and the housing base. They are connected to each other using screws. It was professionally finished with several coats of high gloss varnish sealed and polished with appropriate intermediate sanding. This makes the surface extremely scratch-resistant. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm brushed and demagnetized stainless steel with labeling for both switches.Ortofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Large power supply:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply.Performance bottlenecks and heating no longer occur.Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance. Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Hood to be placed on the substructure: 170Cartridge MM system including installation:Ortofon 2M Red Verso (elliptical): 110 Ortofon 2M Blue Verso (elliptical, naked): 240 Ortofon 2M Bronze Verso (Fineline): 390Ortofon 2M Black Verso (Shibata): 599Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699 Cartridge MC system including installation:Audio-technica AT-OC9XEB (elliptical): 279Audio-technica AT-OC9XEN (elliptical, naked): 369Audio-technica AT33EV(elliptical, naked): 499Audio-technica ATPTG/II (microlinear): 599Audio-technica AT33SA (Shibata): 799 The housing is made of MDF and consists of two individual parts, the housing and the housing base. They are connected to each other using screws. It was professionally finished with several coats of high gloss varnish sealed and polished with appropriate intermediate sanding. This makes the surface extremely scratch-resistant. The connection panel for all required cable connections is located on the back. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your Herstellernummer nicht zutreffend Marke Restaurierter Thorens EAN Nicht zutreffend Modell TD 147

Set Original Plastic Caps Gold for Thorens TD147 JubileeThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.4 original gold-colored plastic capsfor 147 Jubileegood used condition with slight signs of wear4 original gold-colored plastic caps for 147 Jubilee good used condition with slight signs of wear Herstellernummer nicht zutreffend Marke Thorens Herstellungsland und -region Deutschland EAN Nicht zutreffend Modell 147 jubilee

Restaurierter Thorens TD147 Turntable With Vogelaugenfurnier IN Dark BlueThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound Germany Restored Thorens TD-147 stainless steel, dark blue birds eye veneer with high-gloss finishAlso possible with different SME tonearms.Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Item description:Limit switch:    YesInner plate:             metalSpindle: 10mm Basic dimensions:            Width: 54cm, depth: 45cm, height 15cmSpecial feature:           Chassis and sub-chassis with acoustic matHousing:The housing is made of MDF and consists of two individual parts, the housing and the housing base. They are connected to each other using screws. It was professionally finished with several coats of high gloss varnish sealed and polished with appropriate intermediate sanding. This makes the surface extremely scratch-resistant. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm brushed and demagnetized stainless steel with labeling for both switches.Ortofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Large power supply:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply.Performance bottlenecks and heating no longer occur.Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance. Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Hood to be placed on the substructure: 170Cartridge MM system including installation:Ortofon 2M Red Verso (elliptical): 110 Ortofon 2M Blue Verso (elliptical, naked): 240 Ortofon 2M Bronze Verso (Fineline): 390Ortofon 2M Black Verso (Shibata): 599Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699 Cartridge MC system including installation:Audio-technica AT-OC9XEB (elliptical): 279Audio-technica AT-OC9XEN (elliptical, naked): 369Audio-technica AT33EV(elliptical, naked): 499Audio-technica ATPTG/II (microlinear): 599Audio-technica AT33SA (Shibata): 799 The housing is made of MDF and consists of two individual parts, the housing and the housing base. They are connected to each other using screws. It was professionally finished with several coats of high gloss varnish sealed and polished with appropriate intermediate sanding. This makes the surface extremely scratch-resistant. The connection panel for all required cable connections is located on the back. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your Herstellernummer nicht zutreffend Marke Restaurierter Thorens EAN Nicht zutreffend Modell TD 147

Normal 0 21 false false false DE X-NONE X-NONE Thorens Motor Antrieb 16V 50Hz für Thorens Plattenspieler Technisch und optisch einwandfrei. Ausgebaut aus einem TD147(passt auch zum TD146, TD166MKII und einigen TD160 Varianten) für 16V / 50Hz Dieser Artikel unterliegt gem. § 25a UStG der Differenzbesteuerung, ein Ausweis der Mehrwertsteuer auf der Rechnung erfolgt nicht.<

Normal 0 21 false false false DE X-NONE X-NONE Thorens Motor Antrieb 16V 50Hz für Thorens Plattenspieler Technisch und optisch einwandfrei. Ausgebaut aus einem TD147(passt auch zum TD146, TD166MKII und einigen TD160 Varianten) für 16V / 50Hz Dieser Artikel unterliegt gem. § 25a UStG der Differenzbesteuerung, ein Ausweis der Mehrwertsteuer auf der Rechnung erfolgt nicht.

Set Original Plastic Caps Gold for Thorens TD147 JubileeThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.4 original gold-colored plastic capsfor 147 Jubileegood used condition with slight signs of wear4 original gold-colored plastic caps for 147 Jubilee good used condition with slight signs of wear Herstellernummer nicht zutreffend Marke Thorens Herstellungsland und -region Deutschland EAN Nicht zutreffend Modell 147 jubilee

Restored Thorens TD147 Turntable Black And 100 Jähriges oak WoodThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220/230V/50Hz or 110/120V/50/60Hz (for example USA and world wide)Individual production! Please note the processing time stated on Ebay!RESTORED by ART-AND-SOUND Restored 147 in a solid oak frame(the wood grain varies)Wood is a natural product. Please note that the grain is always different. After purchasing, you will receive various housing variants from which you can choose your housing. It will always be made of hundred-year-old oak.Our record players are lovingly put together and assembled by hand. Each of them is unique. The housings are newly manufactured using qualified craftsmanship. Electronic components are checked and replaced if necessary. bAll moving parts are oiled and wearing parts are replaced. A final endurance test rounds off the complex work.frame made from 100-year-old oak wood Wood with history...The old oak wood is probably from round wood that was felled in the Waldkirch area and stored in the “Sailerlenzen” farm. This farm was probably built around 1780 - 1800. This farm burned down in 1902 and the wood was saved from the flames at that time. In their first life, the “logs” were the outside walls of old houses; they were mostly hewn by hand and are approx. 105-120 years old.Item description:Limit switch:     YesInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmSpecial feature:          Subchassis with vibration-absorbing mat Housing:The housing consists of 25mm thick side panels made of solid oak wood (oiled) and a 16mm thick base made of MDF. The connection panel for all required cable connections is located on the back.Cover plate:original cover plate, black with letteringOrtofon VinylMaster Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a very good entry-level system for turntables in this price range. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the sound quality with the next higher needle slot. Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Power adapter:The scope of delivery includes a new power supply with double power and overheating protection.Turntable: The turntable is made in five complex and time-consuming steps polished to a high shine.The high gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.Spikes made of chrome-plated stainless steel: So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood big (for placing on the substructure):    180 Cartridge MM system including installation: ORTOFON 2M Red (elliptical):      129ORTOFON 2M Blue (elliptical, naked):        249ORTOFON 2M Bronze (Fineline): 399 ORTOFON 2M Black (Shibata):     649 AUDIO-TECHNICA VM 740ML (Microlinear):           339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (special line):    699 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked):   369 AUDIO-TECHNICA AT-33EV (elliptical):                   499AUDIO-TECHNICA AT-33PTG/II (Microlinear):         599AUDIO-TECHNICA AT-33SA (Shibata):                      799SME tonearms (with different pickups to choose from):SME 3009 Improved (fixed headshell): 690SME 3009 S2 Improved (replaceable headshell): 690SME Series III (replaceable tonearm tube): 690With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a very good entry-level system for turntables in this price range. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the sound quality with the next higher needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you incr Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 147 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restaurierter Thorens TD147 Turntable With Vogelaugenfurnier BlackThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound Germany Restored Thorens TD-147 stainless steel,Black birds eye veneer with high-gloss finishAlso possible with different SME tonearms.Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Item description:Limit switch:    YesInner plate:             metalSpindle: 10mm Basic dimensions:            Width: 54cm, depth: 45cm, height 15cmSpecial feature:           Chassis and sub-chassis with acoustic matHousing:The housing is made of MDF and consists of two individual parts, the housing and the housing base. They are connected to each other using screws. It was professionally finished with several coats of high gloss varnish sealed and polished with appropriate intermediate sanding. This makes the surface extremely scratch-resistant. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm brushed and demagnetized stainless steel with labeling for both switches.Ortofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable: Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Large power supply:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply.Performance bottlenecks and heating no longer occur. Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Hood to be placed on the substructure: 170Cartridge MM system including installation:Ortofon 2M Red Verso (elliptical): 110 Ortofon 2M Blue Verso (elliptical, naked): 240 Ortofon 2M Bronze Verso (Fineline): 390Ortofon 2M Black Verso (Shibata): 599Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699 Cartridge MC system including installation:Audio-technica AT-OC9XEB (elliptical): 279Audio-technica AT-OC9XEN (elliptical, naked): 369Audio-technica AT33EV(elliptical, naked): 499Audio-technica ATPTG/II (microlinear): 599Audio-technica AT33SA (Shibata): 799 The housing is made of MDF and consists of two individual parts, the housing and the housing base. They are connected to each other using screws. It was professionally finished with several coats of high gloss varnish sealed and polished with appropriate intermediate sanding. This makes the surface extremely scratch-resistant. The connection panel for all required cable connections is located on the back. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your Herstellernummer nicht zutreffend Marke Restaurierter Thorens EAN Nicht zutreffend Modell TD 147

Restaurierter Thorens TD147 Turntable With Vogelaugenfurnier IN Dark BlueThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound Germany Restored Thorens TD-147 stainless steel, dark blue birds eye veneer with high-gloss finishAlso possible with different SME tonearms.Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Item description:Limit switch:    YesInner plate:             metalSpindle: 10mm Basic dimensions:            Width: 54cm, depth: 45cm, height 15cmSpecial feature:           Chassis and sub-chassis with acoustic matHousing:The housing is made of MDF and consists of two individual parts, the housing and the housing base. They are connected to each other using screws. It was professionally finished with several coats of high gloss varnish sealed and polished with appropriate intermediate sanding. This makes the surface extremely scratch-resistant. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm brushed and demagnetized stainless steel with labeling for both switches.Ortofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Large power supply:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply.Performance bottlenecks and heating no longer occur.Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance. Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Hood to be placed on the substructure: 170Cartridge MM system including installation:Ortofon 2M Red Verso (elliptical): 110 Ortofon 2M Blue Verso (elliptical, naked): 240 Ortofon 2M Bronze Verso (Fineline): 390Ortofon 2M Black Verso (Shibata): 599Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699 Cartridge MC system including installation:Audio-technica AT-OC9XEB (elliptical): 279Audio-technica AT-OC9XEN (elliptical, naked): 369Audio-technica AT33EV(elliptical, naked): 499Audio-technica ATPTG/II (microlinear): 599Audio-technica AT33SA (Shibata): 799 The housing is made of MDF and consists of two individual parts, the housing and the housing base. They are connected to each other using screws. It was professionally finished with several coats of high gloss varnish sealed and polished with appropriate intermediate sanding. This makes the surface extremely scratch-resistant. The connection panel for all required cable connections is located on the back. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your Herstellernummer nicht zutreffend Marke Restaurierter Thorens EAN Nicht zutreffend Modell TD 147

Set Original Plastic Caps Gold for Thorens TD147 JubileeThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.4 original gold-colored plastic capsfor 147 Jubileegood used condition with slight signs of wear4 original gold-colored plastic caps for 147 Jubilee good used condition with slight signs of wear Herstellernummer nicht zutreffend Marke Thorens Herstellungsland und -region Deutschland EAN Nicht zutreffend Modell 147 jubilee

Restored Thorens TD147 Turntable Black And 100 Jähriges oak WoodThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220/230V/50Hz or 110/120V/50/60Hz (for example USA and world wide)Individual production! Please note the processing time stated on Ebay!RESTORED by ART-AND-SOUND Restored 147 in a solid oak frame(the wood grain varies)Wood is a natural product. Please note that the grain is always different. After purchasing, you will receive various housing variants from which you can choose your housing. It will always be made of hundred-year-old oak.Our record players are lovingly put together and assembled by hand. Each of them is unique. The housings are newly manufactured using qualified craftsmanship. Electronic components are checked and replaced if necessary. bAll moving parts are oiled and wearing parts are replaced. A final endurance test rounds off the complex work.frame made from 100-year-old oak wood Wood with history...The old oak wood is probably from round wood that was felled in the Waldkirch area and stored in the “Sailerlenzen” farm. This farm was probably built around 1780 - 1800. This farm burned down in 1902 and the wood was saved from the flames at that time. In their first life, the “logs” were the outside walls of old houses; they were mostly hewn by hand and are approx. 105-120 years old.Item description:Limit switch:     YesInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmSpecial feature:          Subchassis with vibration-absorbing mat Housing:The housing consists of 25mm thick side panels made of solid oak wood (oiled) and a 16mm thick base made of MDF. The connection panel for all required cable connections is located on the back.Cover plate:original cover plate, black with letteringOrtofon VinylMaster Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a very good entry-level system for turntables in this price range. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the sound quality with the next higher needle slot. Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Power adapter:The scope of delivery includes a new power supply with double power and overheating protection.Turntable: The turntable is made in five complex and time-consuming steps polished to a high shine.The high gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.Spikes made of chrome-plated stainless steel: So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood big (for placing on the substructure):    180 Cartridge MM system including installation: ORTOFON 2M Red (elliptical):      129ORTOFON 2M Blue (elliptical, naked):        249ORTOFON 2M Bronze (Fineline): 399 ORTOFON 2M Black (Shibata):     649 AUDIO-TECHNICA VM 740ML (Microlinear):           339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (special line):    699 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked):   369 AUDIO-TECHNICA AT-33EV (elliptical):                   499AUDIO-TECHNICA AT-33PTG/II (Microlinear):         599AUDIO-TECHNICA AT-33SA (Shibata):                      799SME tonearms (with different pickups to choose from):SME 3009 Improved (fixed headshell): 690SME 3009 S2 Improved (replaceable headshell): 690SME Series III (replaceable tonearm tube): 690With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a very good entry-level system for turntables in this price range. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the sound quality with the next higher needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you incr Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 147 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restaurierter Thorens TD147 Turntable With Vogelaugenfurnier BlackThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound Germany Restored Thorens TD-147 stainless steel,Black birds eye veneer with high-gloss finishAlso possible with different SME tonearms.Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Item description:Limit switch:    YesInner plate:             metalSpindle: 10mm Basic dimensions:            Width: 54cm, depth: 45cm, height 15cmSpecial feature:           Chassis and sub-chassis with acoustic matHousing:The housing is made of MDF and consists of two individual parts, the housing and the housing base. They are connected to each other using screws. It was professionally finished with several coats of high gloss varnish sealed and polished with appropriate intermediate sanding. This makes the surface extremely scratch-resistant. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm brushed and demagnetized stainless steel with labeling for both switches.Ortofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable: Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Large power supply:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply.Performance bottlenecks and heating no longer occur. Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Hood to be placed on the substructure: 170Cartridge MM system including installation:Ortofon 2M Red Verso (elliptical): 110 Ortofon 2M Blue Verso (elliptical, naked): 240 Ortofon 2M Bronze Verso (Fineline): 390Ortofon 2M Black Verso (Shibata): 599Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699 Cartridge MC system including installation:Audio-technica AT-OC9XEB (elliptical): 279Audio-technica AT-OC9XEN (elliptical, naked): 369Audio-technica AT33EV(elliptical, naked): 499Audio-technica ATPTG/II (microlinear): 599Audio-technica AT33SA (Shibata): 799 The housing is made of MDF and consists of two individual parts, the housing and the housing base. They are connected to each other using screws. It was professionally finished with several coats of high gloss varnish sealed and polished with appropriate intermediate sanding. This makes the surface extremely scratch-resistant. The connection panel for all required cable connections is located on the back. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your Herstellernummer nicht zutreffend Marke Restaurierter Thorens EAN Nicht zutreffend Modell TD 147

4 bouchons en plastique dorés doriginepour 147 Jubilébon état dusage avec légères traces dusure4 bouchons en plastique dorés dorigine pour 147 Jubilé bon état dusage avec légères traces dusure

Restaurierter Thorens TD147 Turntable With Vogelaugenfurnier IN Dark BlueThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound Germany Restored Thorens TD-147 stainless steel, dark blue birds eye veneer with high-gloss finishAlso possible with different SME tonearms.Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Item description:Limit switch:    YesInner plate:             metalSpindle: 10mm Basic dimensions:            Width: 54cm, depth: 45cm, height 15cmSpecial feature:           Chassis and sub-chassis with acoustic matHousing:The housing is made of MDF and consists of two individual parts, the housing and the housing base. They are connected to each other using screws. It was professionally finished with several coats of high gloss varnish sealed and polished with appropriate intermediate sanding. This makes the surface extremely scratch-resistant. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm brushed and demagnetized stainless steel with labeling for both switches.Ortofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Large power supply:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply.Performance bottlenecks and heating no longer occur.Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance. Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Hood to be placed on the substructure: 170Cartridge MM system including installation:Ortofon 2M Red Verso (elliptical): 110 Ortofon 2M Blue Verso (elliptical, naked): 240 Ortofon 2M Bronze Verso (Fineline): 390Ortofon 2M Black Verso (Shibata): 599Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699 Cartridge MC system including installation:Audio-technica AT-OC9XEB (elliptical): 279Audio-technica AT-OC9XEN (elliptical, naked): 369Audio-technica AT33EV(elliptical, naked): 499Audio-technica ATPTG/II (microlinear): 599Audio-technica AT33SA (Shibata): 799 The housing is made of MDF and consists of two individual parts, the housing and the housing base. They are connected to each other using screws. It was professionally finished with several coats of high gloss varnish sealed and polished with appropriate intermediate sanding. This makes the surface extremely scratch-resistant. The connection panel for all required cable connections is located on the back. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your Herstellernummer nicht zutreffend Marke Restaurierter Thorens EAN Nicht zutreffend Modell TD 147

Set Original Plastic Caps Gold for Thorens TD147 JubileeThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.4 original gold-colored plastic capsfor 147 Jubileegood used condition with slight signs of wear4 original gold-colored plastic caps for 147 Jubilee good used condition with slight signs of wear Herstellernummer nicht zutreffend Marke Thorens Herstellungsland und -region Deutschland EAN Nicht zutreffend Modell 147 jubilee