1 Original Thorens Haubenscharnier - nicht nur für den TD 146 MKV. Etwas schmutzig, aber technisch einwandfreiDieses Scharnier gehört hinten an die Zarge rechts -von vorne gesehen

Replacement for the tiny 0.6g anti skate weight as found on the Thorens TD-165, TD-166 and TD-146 turntables using the TP-11 and TP-21 tonearms. These anti skate weights are made as a close replica of the originals. They are made to the correct mass value required but they my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the three anti skate weights and their monofilament lines only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and this set is also supplied with extra spare lines. *

Replacement for the tiny 0.6g anti skate weight as found on the Thorens TD-165, TD-166 and TD-146 turntables using the TP-11 and TP-21 tonearms. These anti skate weights are made as a close replica of the originals. They are made to the correct mass value required but they my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the three anti skate weights and their monofilament lines only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and this set is also supplied with extra spare lines. *

Ich verkaufe einige Thorens Ersatzteile: I only ship within the EU. Not to USA UK Australia Russia India Asia... 1 Thorens Fingerbügel Fingerlift TP63 TP70 TD146 147 160II 166II 115... gebraucht - siehe Beispielbild Wie auf den Bildern zu sehen, ist dieser sehr gut erhalten und voll funktionfähig, als Ersatz für viele ältere Modelle. ANFRAGEN NACH ANDEREN ERSATZTEILEN ODER PREISANGEBOTE BITTE PER MAIL oder telefonisch ab 20:00 Uhr Gewerbliches Angebot. Lieferung erfolgt gem. Fernabsatzgesetz. Siehe Widerrufsbelehrung.

Tocadiscos Thorens TD146La descripción de este producto se ha traducido automáticamente. Si tiene alguna pregunta al respecto, por favor póngase en contacto con nosotros. Tocadiscos Thorens TD146 completo con tapa, fuente de alimentación original, cabezal montado, libro de instrucciones originalTocadiscos Thorens TD146 completo con tapa, fuente de alimentación original, cabezal montado, libro de instrucciones original Modello TD146 Marca Thorens Quantità 1 Uscite audio Stereo L/R RCA

1 (ein) Netzteil für fast alle älteren Thorens - mit 16V~ für Thorens TD146 147 160 166 180 280 290 295 316 318 320 2001 3001 Made in Germany ! Hersteller: Friwo (war Original-Lieferant für Thorens) Nummer FW 6299 Das Gehäuse ist etwas größer als das an Thorens gelieferte Netzteil FW 6199, weil es etwas mehr Stromreserve bietet (35% mehr, gleiche Spannung). Interne Thermosicherung und alle Prüfzeichen wie beim Thorens Originalnetzteil FW 6199.Sie bieten auf 1 Netzteil - auch wenn das Bild 3 Ansichten zusammenfasst. International Bidders please contact me before bidding - please note: not compatible with 100-110V /60Hz

Replacement for the tiny 0.6g anti skate weight as found on the Thorens TD-165, TD-166 and TD-146 turntables using the TP-11 and TP-21 tonearms. These anti skate weights are made as a close replica of the originals. They are made to the correct mass value required but they my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the three anti skate weights and their monofilament lines only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and this set is also supplied with extra spare lines. *

1 (ein) Netzteil für fast alle älteren Thorens - mit 16V~ für Thorens TD146 147 160 166 180 280 290 295 316 318 320 2001 3001 Made in Germany ! Hersteller: Friwo (war Original-Lieferant für Thorens) Nummer FW 6299 Das Gehäuse ist etwas größer als das an Thorens gelieferte Netzteil FW 6199, weil es etwas mehr Stromreserve bietet (35% mehr, gleiche Spannung). Interne Thermosicherung und alle Prüfzeichen wie beim Thorens Originalnetzteil FW 6199.Sie bieten auf 1 Netzteil - auch wenn das Bild 3 Ansichten zusammenfasst. International Bidders please contact me before bidding - please note: not compatible with 100-110V /60Hz

Replacement for the tiny 0.6g anti skate weight as found on the Thorens TD-165, TD-166 and TD-146 turntables using the TP-11 and TP-21 tonearms. These anti skate weights are made as a close replica of the originals. They are made to the correct mass value required but they my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the three anti skate weights and their monofilament lines only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and this set is also supplied with extra spare lines. *